Panasonic Dvd Home Theater Sound System Sc-dm3 Operating Instructions

							11
RQT6220
Disc operations
Discs—Basic play
[DVD-A] [DVD-V][CD] [VCD]
Preparation
≥Turn on the television and select the appropriate video input on the
television to suit the connections for the unit.
≥Press [POWER Í/I] to turn on the unit.
1Press [DVD/CD 1] to select “DVD/CD”
as the source.
2Press [< OPEN/CLOSE] to open the
disc tray and place the disc.
Standing [12 cm (5q) disc]
Standing [8 cm (3q) disc]Lying down
Press [< OPEN/CLOSE] again to close and start play.
3If play doesn’t start after step 2
Press [DVD/CD 1].
4Adjust the volume.
∫When “D.MIX” is flashing (➡page 23)
∫One touch play
When a disc is loaded and the unit is off, press [DVD/CD 1].
The unit comes on and starts play.
∫To stop playPress [∫] (➡ page 12, Resume function).
∫To pause playPress [;] during play.
Press [DVD/CD 1] to restart play.
∫Auto standby
The unit switches to standby mode after about 30 minutes in the stop
mode. Note that it may be switched to standby earlier by the sleep
timer (➡ page 25).
SLOW/SEARCHP.MEMORY
STOP DVD/CD
MENU TOP MENU
CH
SELECT TEST
ENTER
PROGRAM
RANDOM
REPEAT
A-B REPEAT
S.SRND CINEMA
D.ENHEQ
PL FM MODE
MIX 2CH
SHIFTVOLUME MUTING CANCELRETURN LIGHTACTION
XWSKIP TV/VIDEO
TUNER/AUXTV CHXW
123
456
78
0
S10
9
PAUSE
TV
; PAUSE
1·3
Í
2
  ∫ STOP
4
GUI DISPLAY
SUBTITLE
SUBWOOFER
LEVEL AUDIOPAGE
ANGLEGROUP
SLEEP
TUNER/AUX
POWER
VOLUME
PHONESDOWNUP
OPEN/CLOSE/I
//
PLD
DVD/CD
2
  ∫
POWER
Í/I
4
2
1·3
Label to
the right 12 cm  (5q)
disc guide
Disc tray
Sub tray
Pocket Insert into the
pocket.
Label to
the right
Insert inside the
guides.
12 cm (5q) disc guide
Label up. 8 cm (3q)
disc guide
Insert inside
the guides.
Front (L) Center Front (R) Subwoofer
Surround (L) Surround (R) 
						

							RQT6220
12
Disc operations
Discs—Basic play
≥Starting play from a selected chapter
Press the numbered buttons and press [ENTER].
Example: Chapter 23: [2] ➡ [3] ➡ [ENTER]
(Pressing [S10] is unnecessary.)
≥Repeat play
You can use chapter repeat or title repeat (➡ page 15).
≥Program play, random play
You cannot use program play or random play.
≥The information displayed in the On-Screen Menu Icons
Total number of chapters
Note
≥If you play an MP3 track that includes still picture data, it will take
some time before the music itself starts playing and the elapsed
time will not be displayed during this time. Even after the track
starts, the correct play time will not be displayed.
≥This unit is not compatible with ID3 tags.
≥This unit is not compatible with files with a sampling rate of 32 kHz.
Refer to the glossary on page 32 for more information about MP3.
Resume function
[DVD-A] [DVD-V][CD][VCD]
(When the elapsed play time is displayed)
“RESUME” lights on the display when the unit has recorded the posi-
tion at which you stopped play.
Press [1 DVD/CD] to start play from that position.
(When playing DVD-Video ➡ Chapter Preview below)
≥The position is cleared when you:
—Turn the unit off.
—Open the disc tray or select another source.
≥Press [∫] to clear the position.
Position Memory function
[DVD-V][CD][VCD]
(When the elapsed play time is displayed)
Remote control only
During play
Press [P.MEMORY] to
memorize a position.
This position is saved even if you turn the unit off or change the
source. When you turn the unit on or reselect “DVD/CD”, “RESUME”
lights on the display. Press [1 DVD/CD] to start play from the mem-
orized position. The position is cleared.
(When playing DVD-Video ➡ Chapter Preview below)
≥The position is cleared when you open the disc tray.
Chapter Preview
[DVD-V]
The following message appears
immediately after you press [1DVD/CD].
Press [1 DVD/CD] while the message is displayed and the begin-
ning portions of each chapter up to the current one are played.
Full play resumes from the point where you pressed [∫] or
[P.MEMORY].
(This feature works only within a title.)
If you do not press [1 DVD/CD], the message disappears and play
starts from where you pressed [∫] or [P.MEMORY].
SLOW/SEARCHP.MEMORY
STOP DVD/CD
MENU TOP MENU
CH
SELECT TEST
ENTER
PROGRAM
RANDOM
REPEAT
A-B REPEAT
S.SRNDCINEMA
D.ENHEQ
PL FM MODE
MIX 2CH CANCELRETURN LIGHTACTION
XWSKIP TV/VIDEO
TUNER/AUXTV CHXW
123
456
78
0
S10
9
PAUSE
TV
1DVD/CD
  ∫ STOP
TOP MENU
CINEMA6, 5
SLOW/
SEARCH
:, 9
! SKIP 
P.MEMORY
GUI DISPLAY
SUBTITLE
SUBWOOFER
LEVEL AUDIOPAGE
ANGLEGROUP
SLEEP
 ; PAUSE
3, 4, 2, 1
ENTER
D.ENH
MENU
RETURN
Note
≥If “$” appears on the television
The operation is prohibited by the unit or disc.
≥The disc continues to rotate while the menu is displayed even after
you finish playing an item. Press [∫] when you finish to preserve
the unit’s motor and your television screen.
≥Volume may be lower when playing DVDs than when playing other
discs or during television broadcasts.If you turn the volume up, be
sure to reduce the volume again before playing other sources so
that a sudden increase in output does not occur.
When a menu appears on the television
[DVD-A] [DVD-V][VCD]
Remote control only
Press the numbered buttons to select an item.
To select a 2-digit number
Example: To select item 23, press [S10] ➡ [2] ➡ [3].
≥When playing DVDs, you can also use [3, 4, 2, 1] to select
items. Press [ENTER] to confirm your selection.
Play of the selected item now begins.
Other buttons used to operate menus
Read the disc’s instructions for further details about operation.
[9]: Shows the next menu.
[:]: Shows the previous menu.
[RETURN]: Shows the menu screen. [VCD]
[TOP MENU]: Shows the first menu screen. [DVD-A] [DVD-V]
[MENU]: Shows the menu screen. [DVD-V]
Playing MP3
[CD]
Discs recorded using MP3 differ to CDs in the following ways.
≥Structure of the disc (example)Numbered
buttons
Press PLAY to Preview Chapters
Position memorized
1  2  3  4  5  6  7  8  9
Title(Folder)Title
Chapter (File)Chapter playing Elapsed playing time (cannot be changed)
1/  59C0 : 00 : 01 
						

							13
RQT6220
Disc operations
Skipping chapters or tracks
[DVD-A] [DVD-V][CD][VCD]
During play or while paused
Press [:] or [9].≥Each press increases the number of skips.
Fast forward and rewind—SEARCH
[DVD-A] [DVD-V][CD][VCD]
During play
Press [6] or [5].
≥Press and hold [:/
X XX X
X] or [
W WW W
W/9] on the main unit.
≥Audio will be heard during search for most discs. You can turn this
audio off if you want to (➡ page 26, Audio—Audio during Search).
Slow-motion play
[DVD-A] [DVD-V][VCD]
While paused
Press [6] or [5].
Press and hold [:/
X XX X
X] or [
W WW W
W/9] on the main unit.
Frame-by-frame viewing
[DVD-A] [DVD-V][VCD]
Remote control only
While paused
Press [2] or [1].The frame changes each time you press the button.
≥The frames change in succession if you press and hold the button.
≥Pressing [;] also activates forward frame-by-frame.
When playing Video CDs with playback control
Pressing buttons to perform skip, search or slow-motion may
take you to a menu screen.
Starting play from a selected
track or title
[DVD-A] [DVD-V] [CD][VCD]
Remote control only
Press the numbered buttons to select the
item.
To select a 2-digit number
Example: To select track 23, press [S10] ➡ [2] ➡ [3].
Play starts from the selected item.
Note
This works only when stopped with some discs.
Cinema
[DVD-A] [DVD-V][VCD]
Remote control only
You can change the picture quality for movie viewing.
Press [CINEMA].
Each time you press the button:
C:Mellows images and enhances detail in dark scenes.
:
;
N:Normal mode (Factory preset)
For your reference
You can make finer adjustments to the picture if desired (➡page 19,
Unit information—Video menu—Digital picture mode—User mode).
Dialogue Enhancer
[DVD-V]
(Dolby Digital/DTS, 3-channel or over, where the dialogue is re-
corded in the center channel)
Remote control only
This mode makes the dialogue in movies easier to hear.
Press [D.ENH].
Each time you press the button:
ON(>OFF (Factory preset)
NoteDialogue Enhancer will not work or will have less effect with some discs,
even if you select “ON”.
Notes
≥The speed of search and slow-motion increases up to 5 steps.≥Press [1 DVD/CD] to restart play.
≥You cannot move backwards with Video CD during frame-
by-frame and slow-motion.
≥Frame-by-frame and slow-motion only work on the moving
picture parts of DVD-Audio.
C
ON 
						

							RQT6220
14
Disc operations
192k24b 2chLPCM3/2.1 chDigitalÎ1  1 1 ENG 
Subtitles
During play
Press [SUBTITLE].
The number changes each time you press the button.
≥In some cases, the subtitle language is not changed to the
selected one immediately.
≥If the subtitles overlap closed captions recorded on discs, turn the
subtitles off.
≥Refer to [A] on page 19 for language abbreviations.
To clear/display the subtitles
1. Press [SUBTITLE].
2. Press [1].
3. Press [3, 4] to select “OFF” or “ON”.
Angles
During play
Press [ANGLE].
The number changes each time you press the button.
Changing soundtracks, subtitle languages and angles
12
I love youJe t’aime
ENGONFRAON12
[DVD-A] [DVD-V]
Remote control only
Some DVDs have multiple soundtracks, subtitle languages and
camera angles, and you can change these during play.
≥“–” or “– –” is displayed instead of the language number in circum-
stances such as when no language is recorded on the disc.
Soundtracks
During play
Press [AUDIO].The number changes each time you press the button.
≥Play restarts from the beginning of the soundtrack when changing
DVD-Audio soundtracks that are accompanied by still pictures.
≥Even if a second soundtrack isn’t recorded on a DVD-Audio, two
soundtrack numbers will normally be shown when you press
[AUDIO]. The soundtrack currently playing is number 1.
≥You can also use this button to turn the vocals on and off on
karaoke discs. Read the disc’s instructions for details.
≥Refer to [A] and [B] on page 19 for language abbreviations and
audio signal type details.
≥[VCD]
Audio changes as follows each time you press [AUDIO]:
LR>L>R
^-------------}
SLOW/SEARCHP.MEMORY
STOP DVD/CD
MENU TOP MENU
CH
SELECT TEST
ENTER
PROGRAM
RANDOM
REPEAT
A-B REPEAT
S.SRND CINEMA
D.ENHEQ
PL FM MODE
MIX 2CH
SHIFT VOLUMEMUTING CANCELRETURN LIGHTACTION
XWSKIP TV/VIDEO
TUNER/AUXTV CHXW
123
456
78
0
S10
9
PAUSE
TV
AUDIO
ANGLE
3, 4,  1
GUI DISPLAY
SUBTITLE
SUBWOOFER
LEVEL AUDIOPAGE
ANGLEGROUP
SLEEP
SUBTITLE
[DVD-A] [DVD-V]
Soundtrack playingSoundtrack selected 
						

							15
RQT6220
Disc operations
Discs—Convenient functions
Repeat play
[DVD-A] [DVD-V][CD] [VCD]
During play
Press [REPEAT].Each time you press the button:
[DVD-A]
≥Normal play
Track Whole group OFF
≥All group play
Track All groups OFF
≥Program play
Track Whole program OFF
≥Random play
Track All selected groups OFF
[DVD-V]
[CD] (MP3 disc)
Chapter Title OFF
[CD] [VCD](There is no on-screen display.)
Track Entire disc OFF
If the Video CD has playback control
1. Press [∫].
2. Press the numbered buttons to select a track to start play
(➡ page 13).
3. Press [REPEAT] (➡ above).
Note
You cannot use repeat play to repeat an entire DVD-Video or an
entire MP3 disc.
∫To repeat only your favorite tracks[DVD-A][CD] [VCD]
Start program play (➡ page 16) and press [REPEAT] to select the
repeat mode. (When the elapsed play time is displayed)
Remote control only
A-B repeat play
[DVD-A] [DVD-V][CD] [VCD]
You can repeat a section between points A and B within a title or
track.
1During play
Press [A-B REPEAT] at the starting
point (A).
2Press [A-B REPEAT] at the finishing
point (B).
A-B repeat starts.
To cancel
Press [A-B REPEAT] until “ 
✱ ✱ ” is displayed.
Note
≥Some subtitles recorded around point A or B may fail to appear.
≥The unit automatically determines the end of a title/track as point B
when the end of the title/track is reached.
A ✱
A B
SLOW/SEARCHP.MEMORY
STOPDVD/CD
MENU TOP MENU
CH
SELECT TEST
ENTER
PROGRAM
RANDOM
REPEAT
A-B REPEAT
S.SRND CINEMA
D.ENHEQ
PL FM MODE
MIX 2CH
SHIFT VOLUMEMUTING CANCELRETURN LIGHTACTION
XWSKIP TV/VIDEO
TUNER/AUXTV CHXW
123
456
78
0
S10
9
PAUSE
TV
REPEAT
  ∫  STOP
A-B REPEAT
GUI DISPLAY
SUBTITLE
SUBWOOFER
LEVEL AUDIOPAGE
ANGLEGROUP
SLEEP
CTOFF
Numbered
buttons
TGOFF
ALLTOFFALLAALL
PGMTOFFPGMAPGM
RNDTOFFRNDARND 
						

							RQT6220
16
Disc operations
Program play
[DVD-A]
[CD] [VCD] (There is no on-screen display.)
To play a maximum of 24 tracks in a programmed order
1While stopped
Press [PROGRAM] until the following
display appears.
e.g. [DVD-A]
2[DVD-A]
Press the numbered buttons to select
a group.
3Press the numbered buttons to select
a track.
≥Repeat steps 2 and 3 to program other tracks.
≥[DVD-A] To select a track using the cursor buttons
Press [ENTER] and [3, 4] to select a group or track, then
press [ENTER] again to register the number.
All the tracks in the selected group are selected when you
select “ALL”.
4Press [1 DVD/CD].Play now begins in the programmed sequence.
[DVD-A] (Follow the on-screen instructions.)
To add or change groups or tracks
Press [3, 4] to select an available item, then repeat steps 2 and 3.
To move to the page before or after the one shown
Press [
6, 5].
To clear a track
1. Select the item you want to clear with [
3, 4].
2. Press [CANCEL], or select “Clear” with [3, 4, 2, 1] and press
[ENTER].
To clear the whole program
Select “Clear all” with [
3, 4, 2, 1] and press [ENTER].
[CD] [VCD] (On the unit’s display)
To add tracks
Repeat step 3.
To clear the last track
Press [CANCEL].
To clear the whole program
Press [∫].
To check the contents of the program
After stopping play, press [:, 9]. The track numbers and pro-
gram positions are displayed in order.
To exit the program mode
Press [PROGRAM] while stopped.
Note
When playing DVD-Audio, the program is cleared when you switch
the unit to standby, open the disc tray, select another source, or exit
the program mode.
Discs—Convenient functions
SLOW/SEARCHP.MEMORY
STOP DVD/CD
MENU TOP MENU
CH
SELECT TEST
ENTER
PROGRAM
RANDOM
REPEAT
A-B REPEAT
S.SRND CINEMA
D.ENHEQ
PL FM MODE
MIX 2CH
SHIFTVOLUME MUTING CANCELRETURN LIGHTACTION
XWSKIP TV/VIDEO
TUNER/AUXTV CHXW
123
456
78
0
S10
9
PAUSE
TV
1DVD/CD
GROUP
3, 4, 2, 1
ENTER  
∫  STOP
RANDOM PROGRAM
6, 5SLOW/
SEARCH:, 9
! SKIP 
GUI DISPLAY
SUBTITLE
SUBWOOFER
LEVEL AUDIOPAGE
ANGLEGROUP
SLEEP
CANCEL
PAGE
SHIFT
Remote control only
[DVD-A]
If you select bonus groups, you will have to enter a 4-digit password
(➡ page 17).
All group play
[DVD-A]
To play all the groups on a disc
1While stopped
Press [PROGRAM] until the all group
play screen appears.
2Press [1 DVD/CD].
Press PLAY to start
All Group Playback
PLAY MODE
ENTERRETURN
6 ∫ 1 5
Choose a group and track, then press ENTER.No TimeG
Total Time
0 Press PLAY to startTPlayClear
Clear all
0:00
SELECT
1
Numbered
buttons
Track No.
Program No. Group No.
Track No.Program No. 
						

							17
RQT6220
Disc operations
Random play
[DVD-A] [CD] [VCD]
Remote control only
[DVD-A]
1While stopped
Press [RANDOM].
e.g. three groups
2Press [2, 1] to select a group and
press [ENTER].
≥You can select more than one group.
≥To clear a group, select it again and press [ENTER].
3Press [1 DVD/CD].Play now begins in random order.
[CD] [VCD] (There is no on-screen display.)
While stopped
Press [RANDOM].Play now begins in random order.
To cancel
Press [∫] until “RND” goes out.
Selecting groups to play
[DVD-A]
Remote control only
The tracks on DVD-Audio are divided into groups. How these groups
are played differs with the disc so read the instructions that came
with the disc for further details.
1Press [SHIFT] r [GROUP].
2Press the numbered buttons to select
the group and press [ENTER].
3Press the numbered buttons to select
the track number and press [ENTER].
The selected group and track begin to play.
Playing all the groups in succession (➡ page 16, All group play)
Playing bonus groups
Some discs contain bonus groups. To enjoy these groups you may
have to enter a password. Refer to the disc’s jacket.
1. Repeat steps 1 and 2 above to select the bonus group.
2. Enter the 4-digit password with the numbered buttons and press
[ENTER].
≥If you enter the wrong password, you can erase a digit by press-
ing [CANCEL].
3. Press the numbered buttons to select a track and press [ENTER].
≥The bonus group can be played as many times as you like after the
password has been entered until you:
—Turn the unit off.
—Open the disc tray or select another source.
Selecting still pictures—Page Skip
[DVD-A]
Remote control only
During play
Press [SHIFT] r [PAGE].The page changes each time you press the buttons.
Choose  a group or groups.All 1 2 3
Random Playback
0 Press PLAY to start
ENTERRETURN
SELECT
T1G1
PAGE 1 
						

							RQT6220
18
Disc operations
Using On-Screen Menu Icons
2[Unit\information\only]
While the leftmost icon is highlighted
Press [3, 4] to select the menu.
Each time you press the button:
[>Play menu
l
l
l;:
l>Display menu
l
l
l;:
l>Audio menu
l
l
l;:
{>Video menu
3Press [2, 1] to select the item.
4Press [3, 4] to select the setting.≥Items with “3” or “4” above and below can be changed by
[3, 4].
≥Press [ENTER] if the setting does not change after pressing
[3, 4].
≥Some items require different operations. Read the explana-
tions on the following pages.
For your reference
≥Depending on the condition of the unit (playing, stopped, etc.) and
the type of software you are playing, there are some items that you
cannot select or change.
≥When numbers are displayed (e.g. title No.), the numbered buttons
are also effective for setting. After entering the numbers, press
[ENTER] to register the setting.
To clear the menus
Press [RETURN] until the menus disappear.
∫To change the position of the menus
1. Press [2, 1] to select the rightmost icon.
2. Press [3, 4] to move the menus.
(There are 5 positions.)
Shuttle screen
There are five speeds for both backward and forward slow-motion
and search.
The numbers on either side of the shuttle screen indicate the maxi-
mum speeds of the search.
Numbered
buttons
[DVD-A] [DVD-V] [CD] [VCD]
Remote control only
On-Screen Menu Icons are menus that contain information about the
disc or unit. These menus allow you to perform operations by chang-
ing this information.
Common procedures
1Press [GUI DISPLAY].Each time you press the button:
[>Disc information
l
l
l;
l>Unit information (➡ step 2)
l
l
l;
l>Shuttle screen
l
l
l;
{=Original display
≥The screens depend on disc contents.
IconContent
Pause
Slow-motion play
E: Backward [DVD-A] [DVD-V]
D: Forward [DVD-A] [DVD-V] [VCD]
Play
Search
6: Backward
5: Forward
SLOW/SEARCHP.MEMORY
STOP DVD/CD
MENU TOP MENU
CH
SELECT TEST
ENTER
PROGRAM
RANDOM
REPEAT
A-B REPEAT
S.SRND CINEMA
D.ENHEQ
PL FM MODE
MIX 2CH
SHIFT VOLUMEMUTING CANCELRETURN LIGHTACTION
XWSKIP TV/VIDEO
TUNER/AUXTV CHXW
123
456
78
0
S10
9
PAUSE
TV
3, 4, 2, 1
ENTER
GUI DISPLAY
CANCEL
RETURNGUI DISPLAY
SUBTITLE
SUBWOOFER
LEVEL AUDIOPAGE
ANGLEGROUP
SLEEP
2C21 : 46 : 501 ENG 3/2.1 chDigitalÎENGON11T
AB1 2 3✱✱OFF
r100j100
OFFI     P    B
OFF
N
AB1 2 3✱✱OFF 
						

							19
RQT6220
Disc operations
e.g. [DVD-V]
Disc information
.1: Subwoofer signal(not displayed if there is no subwoofer signal)
.0: No surround
.1: Mono surround
.2: Stereo surround (left/right)
.1: Center
.2: Front leftiFront right
.3: Front leftiFront rightiCenter
[B] [B][B] [B]
[B]Signal type/data
LPCM/PPCM/ÎDigital/DTS: Signal type
k (kHz): Sampling frequency
b (bit): Number of bits ch (channel): Number of channels
  Example:
3/2 .1ch [A] [A][A] [A]
[A]Audio/Subtitle language
ENG: English
FRA: French
DEU: German
ITA: Italian
ESP: Spanish
NLD: Dutch
SVE: Swedish
NOR: Norwegian
DAN: Danish
POR: Portuguese
RUS: Russian
JPN: Japanese
CHI: Chinese
KOR: Korean
MAL: Malay
VIE: Vietnamese
THA: Thai
¢: Others
[DVD-A]Group number
[DVD-A]  [CD] [VCD] Track number
[DVD-V]Title number
[DVD-V]Chapter number
[DVD-A] [DVD-V] Time
Select a position to start play by
specifying a time with the
numbered buttons.
[DVD-A] [CD] [VCD]
Changing the time display
Press [3, 4] to show the elapsed
play time, remaining time for the
track, or remaining time for the disc/
group.
[DVD-A] [DVD-V] Soundtrack
aSoundtrack language
(See [A] at right for language
abbreviations.)
bAudio signal type
(See [B] at right for details.)
Karaoke vocal on/off
(Karaoke DVD only)
Solo: OFF or ON
Duet: OFF, V1iV2, V1 or V2
[DVD-A] [DVD-V] Subtitle language
(See [A] at right for language
abbreviations.)
[DVD-A] [DVD-V] Subtitles on/off
ON()OFF
[DVD-A] [DVD-V] Angle number
[DVD-A] Still picture number
Selected picture is shown during
play.
[VCD] Audio mode
LR(>L(>R
^-----------------------J
[VCD] (with playback control only)
Menu play
Indicates whether menu play
(playback control) is on or off.
Unit information
Play menu
A-B repeat (➡ page 15)
[ENTER] (start point) ➡ [ENTER] (finish point)
To cancel: [ENTER]
Repeat play (➡ page 15)
[DVD-A] [CD] [VCD]
Play mode display (➡ pages 16 and 17)
---: Normal play PGM: Program play
RND: Random play ALL: All group play([DVD-A])
Marker
You can mark up to 5 positions to play again.
[ENTER] (The unit is now ready to accept markers.)
To mark a position:
[ENTER] (at the desired point)
To mark another position: [2, 1] ➡ [ENTER]
To recall a marker: [2, 1] ➡ [ENTER]
To erase a marker: [2, 1] ➡ [CANCEL]
Display menu
I/P/B display (➡ page 32) ON()OFF
Displays the picture type (I/P/B) in the still
picture mode.
Video menu
Audio menu
[DVD-V]
Dialogue Enhancer (➡ page 13)
ON()OFF
[DVD-A] [DVD-V] [VCD] Digital picture mode
N: Normal mode C: Cinema mode (➡ page 13)
U: User mode
The following items are also displayed when you
select “U”.
Contrast (j7 to i7)
Increases the contrast between white and black
parts of the picture.
Brightness (0 to i15)
Brightens the picture.
Color (j7 to i7)
Adjusts the shade of the picture’s color.
T2C21 : 46 : 501 ENG 3/2.1 chDigitalÎENGON11
2G
T
2
C2
1 : 46 : 50
1   ✱VocalOFF
ENG
ON
1
ENG1
ON
1
AB
OFF
1 2 3✱✱
OFF
I     P    B
OFF
N
0
Notes on marker
≥Only when the elapsed play time is displayed.
≥Some subtitles may fail to appear around the marker.
≥All the markers are cleared when you:
–Turn the unit off.
–Open the disc tray or select another source.
b
a
1 ENG 3/2.1 ch
 DigitalÎ
Page
1
L  R
P   B   CP   B   CON
0
0 
						

							RQT6220
20
Radio operations
2Press [6] or [5] to select the fre-
quency of the required station.
Press and hold [6] or [5] until the frequency starts scroll-
ing to start automatic tuning. Tuning stops when a station is
found.
3Adjust the volume.
If noise is excessive in FM
Press [SHIFT] 
i ii i
i [FM MODE] to display
“MONO”.
This mode improves sound quality if reception is weak but broad-
casts are heard in monaural.
Press [SHIFT] i [FM MODE] again to cancel the mode.
The mode is also canceled when you changed the frequency.
Turn “MONO” off for normal listening.
Stereo and monaural broadcasts are automatically played as they
are received.
FM frequency step
Main unit only
The step is factory-set to 0.2 MHz, but you can change it to receive
broadcasts allocated 0.1-MHz steps.
1Press [TUNER/AUX] to select “FM”.
2Press and hold [TUNER/AUX].
After a few seconds the display changes to show the current
minimum frequency. Continue to hold the button down. The
minimum frequency changes and the step is changed.
To return to the original step, repeat the above steps.
Note
Any FM frequencies preset in channels will be changed by this
procedure. Preset them again.
The radio: manual tuning
Remote control only
Radio stations can be tuned manually by selecting the station’s
frequency or they can be preset into channels to make it easy to tune
(➡ page 21).
1Press [TUNER/AUX] to select “FM” or
“AM”.
Each time you press the button:
FM>AM>AUX
^---------------------}
SLOW/SEARCHP.MEMORY
STOP DVD/CD
MENU TOP MENU
CH
SELECT TEST
ENTER
PROGRAM
RANDOM
REPEAT
A-B REPEAT
S.SRND CINEMA
D.ENHEQ
PLFM MODE
MIX 2CH
SHIFT VOLUMEMUTING CANCELRETURN LIGHTACTION
XWSKIP TV/VIDEO
TUNER/AUXTV CHXW
123
456
78
0
S10
9
PAUSE
TV
SLOW/SEARCH
FM MODE6, 5
SHIFT
TUNER/AUX
s, r
VOLUME
GUI DISPLAY
SUBTITLE
SUBWOOFER
LEVEL AUDIOPAGE
ANGLEGROUP
SLEEP
TUNER/AUX
PLD
DVD/CDTUNER/AUX
Displayed when a radio
station is tuned.
Displayed when a stereo FM
broadcast is being received.