Panasonic Dvd Cp72 Operating Instructions Manual

							21
RQT6263
Advanced operations
This chart shows the settings for this unit. Change the settings to suit your preferences and to suit the unit to the environment in which it is being
used. These settings are retained in memory until they are changed, even if the unit is turned off. See page 22 for details on menu operation.
§1 The original language of each disc will be selected.§2 Input a code number with the numbered buttons (➡ page 22).§3 If the language selected for “Audio” is not available, subtitles of that
language will automatically appear if available on that disc.
Changing settings
Menus
Disc
Video
Audio
Display
Others
Items
AudioChoose the audio language.
Subtitle
Choose the subtitle language.
Menus
Choose the language for disc menus.
Ratings
Set a ratings level to limit DVD-Video play.
≥The password screen is shown if you choose levels 0 to 7 or if you
 choose “Ratings” when levels 0 to 7 have been selected (➡ page 22).
≥Select “Level 0” to prevent play of discs that do not have ratings levels
 recorded on them.
TV Aspect (➡ page 9)
Choose the setting to suit your television and preference.
Progressive Out
Choose “Enable” to enable progressive output .
Still Mode (➡ page 25, Glossary—Frame still and field still)
Specify the type of picture shown when paused.
Black Level Control
Change the black level of the picture if you connected a television through
the COMPONENT VIDEO OUT terminals.
Speaker Setting (➡ page 23)
Choose the settings to suit your audio system and the listening
environment.
Digital Audio Output
Select whether to output digital signals or not.
PCM Down Conversion (➡ page 23)
Dolby Digital (➡ page 23)
DTS Digital Surround (➡ page 23)
Dynamic Range Compression (Dolby Digital only) (➡ page 25, Glossary)
Change the dynamic range for late night viewing.
Audio during Search§5
Choose whether to have sound during search.
Menu Language
Choose the language for these menus and the on-screen messages
.
On-Screen MessagesChoose whether to show on-screen messages or not.
DVD-Video Mode
Select how to play pictures contained on some DVD-Audio. The setting
returns to “Off” when you change the disc or turn the unit off.
Demo
A demonstration of the unit’s on-screen displays starts when you select
“On”. The demonstration stops when you press a button and the setting
reverts to “Off”.
QUICK SETUP (➡ page 9)
Answer questions to make basic settings.
Options (Underlined items are the factory preset.)
English French SpanishOriginal§1Other ¢¢¢¢§2
Automatic§3English French SpanishOther ¢¢¢¢§2
English French SpanishOther ¢¢¢¢§2
Setting ratings (When level 8 is selected)8 No Limit 1 to 7§40 Lock All
Changing ratings (When level 0–7 is selected)
Unlock Player Change Password
Change Level Temporary Unlock
4:3 Pan&Scan 4:3 Letterbox 16:9
Disable Enable
Automatic Field Frame
Lighter: when connected to a TV through the VIDEO
OUT or S VIDEO OUT terminal.
Darker: when connected to a TV through the COM-
PONENT VIDEO OUT (Y/PB/PR) terminals.
Multi-channel:
when 3 or more speakers are connected.
≥Speaker presence and size
≥Delay time≥Channel balance
2-channel:
when 2 speakers or an amplifier with a Dolby Pro
Logic decoder is connected.
On: Digital signals are output.
Off: Digital signals are not output. This improves
sound quality when you are using analog
connection.
No Yes
Bitstream PCM
PCM Bitstream
Off On
On Off
English Français Español
On Off
Off: DVD-Audio are played as DVD-Audio.
On: DVD-Video contents found on DVD-Audio can be
played.
Off On
YesNo
§4 Prohibits play of DVD-Video with corresponding ratings recorded on them.§5 The feature doesn’t work for WMA files and DTS-CD discs. Audio will be
heard when playing some DVD-Audio despite the settings you make here. 
						

							22
RQT6263
Advanced operations
SLEEP
SLOW/SEARCHSKIP
STOP PLAY
MENU TOPMENU
ENTER
DISPLAY
SUBTITLE
DISC DISC1 DISC2 DISC3
PROGRAM DISC4 DISC5
SEQUENTIAL
FL SELECT
AUDIO ONLYPOSITION
MEMORY A-B
REPEAT REPEAT RANDOMPAGEZOOMGROUPCANCEL AUDIO ANGLE
QUICK REPLAYRETURN SETUP
123
456
78
09
10
OPEN/CLOSE
PLAYLISTDIRECTNAVIGATOR
PAUSE
POWER
3,4,2, 1
ENTER
SETUP
CANCEL
RETURN
Common procedures
See page 21 for menu and option details.
1Press [SETUP] to show the menus.
≥The QUICK SETUP screen appears when you press [SETUP] the
first time after purchase (➡ page 9).
2Press [2, 1] to select the menu’s tab.The screen changes to display the menu.
Disc Video Audio
(---) (---)
Others Display
(------------------------------------------------------)
3Press [3, 4] to select the item you want to
change and press [ENTER].
4Press [3, 4] to select the option and press
[ENTER].
The screen now shows the menu again.
To return to the previous screen
Press [RETURN].
To exit the SETUP menu
Press [SETUP].
Entering a password (Ratings)
[DVD-V]
The password screen is shown when you select levels 0 to 7.
1. Input a 4-digit password with the numbered buttons.
≥If you enter a wrong number, press [CANCEL] to erase it.
2. Press [ENTER].
≥The lock symbol appears closed to show the rating is locked.
≥Do not forget your password.
3. Press [ENTER] to confirm the 4 digits.
Now, when you insert a DVD-Video that exceeds the ratings limit
you set, a message appears on the television.
Follow the on-screen instructions.
e
ue
u
Numbered
buttons
Changing settings
Abkhazian: 6566
Afar: 6565
Afrikaans: 6570
Albanian: 8381
Ameharic: 6577
Arabic: 6582
Armenian: 7289
Assamese: 6583
Aymara: 6588
Azerbaijani: 6590
Bashkir: 6665
Basque: 6985
Bengali;Bangla:
6678
Bhutani: 6890
Bihari: 6672
Breton: 6682
Bulgarian: 6671
Burmese: 7789 Language code list
Byelorussian:
6669
Cambodian: 7577
Catalan: 6765
Chinese: 9072
Corsican: 6779
Croatian: 7282
Czech: 6783
Danish: 6865
Dutch: 7876
English: 6978
Esperanto: 6979
Estonian: 6984
Faroese: 7079
Fiji: 7074
Finnish: 7073
French: 7082
Frisian: 7089
Galician: 7176Georgian: 7565
German: 6869
Greek: 6976
Greenlandic: 7576
Guarani: 7178
Gujarati: 7185
Hausa: 7265
Hebrew: 7387
Hindi: 7273
Hungarian: 7285
Icelandic: 7383
Indonesian: 7378
Interlingua: 7365
Irish: 7165
Italian: 7384
Japanese: 7465
Javanese: 7487
Kannada: 7578
Kashmiri: 7583Kazakh: 7575
Kirghiz: 7589
Korean: 7579
Kurdish: 7585
Laotian: 7679
Latin: 7665
Latvian, Lettish:
7686
Lingala: 7678
Lithuanian: 7684
Macedonian: 7775
Malagasy: 7771
Malay: 7783
Malayalam: 7776
Maltese: 7784
Maori: 7773
Marathi: 7782
Moldavian: 7779
Mongolian: 7778Nauru: 7865
Nepali: 7869
Norwegian: 7879
Oriya: 7982
Pashto, Pushto:
8083
Persian: 7065
Polish: 8076
Portuguese: 8084
Punjabi: 8065
Quechua: 8185Rhaeto-Romance:
8277
Romanian: 8279
Russian: 8285
Samoan: 8377
Sanskrit: 8365
Scots Gaelic:
7168Serbian: 8382
Serbo-Croatian:
8372
Shona: 8378
Sindhi: 8368
Singhalese: 8373
Slovak: 8375
Slovenian: 8376
Somali: 8379
Spanish: 6983
Sundanese: 8385
Swahili: 8387
Swedish: 8386
Tagalog: 8476
Tajik: 8471
Tamil: 8465
Tatar: 8484
Telugu: 8469
Thai: 8472Tibetan: 6679
Tigrinya: 8473
Tonga: 8479
Turkish: 8482
Turkmen: 8475
Twi: 8487
Ukrainian: 8575
Urdu: 8582
Uzbek: 8590
Vietnamese: 8673
Volapük: 8679
Welsh: 6789
Wolof: 8779
Xhosa: 8872
Yiddish: 7473
Yoruba: 8979
Zulu: 9085
Disc
SELECT
Audio
Subtitle
Menus
RatingsEnglish
English Automatic
Level 8
SETUP
TA B 
						

							23
RQT6263
Advanced operations
SETUP
SELECT
ENTER  RETURN
m s
m s
d B
 0
d Bd B L
Exit
Test
LSR
SW
C
RS d B
 0
 0
 0 0  0
b   a   caa
 (LS)                                     (RS)
a  c                b               c  ac  a
Digital output
[DVD-A] [DVD-V]
Change the settings when you have connected equipment through this
unit’s DIGITAL AUDIO OUT terminal (OPTICAL).
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz or
88.2 kHz.
≥Select “Yes”  if the equipment you connect cannot process signals with a
sampling frequency of 96 kHz or 88.2 kHz.
No (Factory preset): Output as 96 kHz or 88.2 kHz
Yes: Converted to 48 kHz or 44.1 kHz
[Note]
≥Make sure that “Digital Audio Output” setting (➡ page 21) is “On”.
≥Signals are converted to either 48 kHz or 44.1 kHz despite the above
settings if the signals have a sampling frequency of over 96 kHz, or the
disc has copy protection.
≥Some equipment cannot handle sampling frequencies of 88.2 kHz, even
if they can handle 96 kHz. Read your equipment’s operating instructions
for details.
Dolby Digital and DTS Digital Surround
Bitstream (Factory preset for Dolby Digital):
Select if the equipment you connected can decode the signal.
PCM (Factory preset for DTS Digital Surround):
Select if the equipment you connected cannot decode the signal.
IMPORTANT
If the equipment you connected cannot decode the signal, the
setting must be changed to PCM. If not, signals the equipment cannot
process will be output by this unit, causing high levels of noise which
can damage your hearing and the speakers.
Speaker setting
Change speaker presence and size a, delay time b, and channel balance
c to suit the speakers you have connected.
These settings are not necessary when you select “2-channel” (only two
speakers are connected).
[Note]This feature works only for analog connection (➡ page 7).
Speaker presence and size (a)
1. Press [3, 4, 2, 1] to select the item and press [ENTER].
2. Press [3, 4] to select the setting and press [ENTER].
Icon examples:
Surround speaker (LS)
≥Large:When the speaker supports low-frequency (under 100 Hz)
reproduction.
≥Small:Select when the speaker does not support low-frequency
reproduction.
If the subwoofer is set to No, the front speakers will automatically be set to
Large.
Delay time (b)
[DVD-V] (Dolby Digital and DTS, center and surround speakers only)
For optimum listening with 5.1-channel sound, all the speakers, except for
the subwoofer, should be the same distance from the seating position. If
you have to place the center or surround speakers closer to the seating
position, adjust the delay time to make up for the difference.
If distances d (from the center speaker) and f (from the surround
speakers) are the same as or greater than e (from the front speakers),
leave the delay time as “0”, the factory preset.
If either distance d or f is less than e, find the difference in the relevant
table and change to the recommended setting.
Changing the delay time
1. Press [3, 4, 2, 1] to select the delay time box and press
[ENTER].
2. Press [3, 4] to adjust the delay time and press [ENTER].
Channel balance (c)
1. Press [3, 4, 2, 1] to select “Test” and press [ENTER].
A test signal is output from one speaker at a time, starting with the front
left speaker and proceeding clockwise.
Front (L)_——) Center_——) Front (R)
:;
Surround (LS)(—————== Surround (RS)
2. While listening to the test signal, press [3, 4] to adjust the
volume of the center and surround speakers so they are the same
apparent volume as the front speakers (j6 to i6).
(The front speakers cannot be adjusted here.)
3. Press [ENTER].
The test signal stops.
≥No signal is output for the subwoofer. To adjust its volume, play
something, then return to this screen to adjust to suit your taste.
To finish the speaker setting
Press [3, 4, 2, 1] to select “Exit” and press [ENTER].
[Note]The unit may be unable to output as set here due to limitations imposed by
the unit itself or the disc being played. (The display’s “D.MIX” indicator
goes out in these cases.) Front (L)   Center Front (R)
Exit
Test
signalNoLarge Small
d Center speaker
Difference
Approx. 50 cm (1 1/2 feet)
Approx. 100 cm (3 feet)
Approx. 150 cm (5 feet)
Approx. 200 cm (6 feet)
Setting
1.3 ms
2.6 ms
3.9 ms
5.3 ms
f Surround speakers
Difference
Approx. 200 cm (6 feet)
Approx. 400 cm (12 feet)
Approx. 600 cm (18 feet)
Setting
5.3 ms
10.6 ms
15.9 ms
LSLS
LSRS
LR
SW
fe d
C
——Surround——Subwoofer 
						

							24
RQT6263
Reference
6
–
12
≥Insert the AC power supply cord securely into the household AC outlet.
≥To conserve power, the unit automatically switches to standby after approximately 30 minutes in
   the stop mode. Turn the power back to ON.
≥The unit was switched to standby by the SLEEP timer.
PowerPage
No power.
The unit is automatically
switched to the standby mode.
Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not
solve the problem, contact the Panasonic Customer Call Center at 1-800-211-7262, or e-mail [email protected], or web site
(http://www.panasonic.com).
Picture
–
–
–
6
–
–
9, 21
9
15
6
6
9
20
20≥Some distortion is normal during SEARCH.
≥The screen may be disrupted briefly when you turn off the AUDIO ONLY feature.
≥If “This disc is PAL system. The output is sound only.” is on the television, then you have loaded
a PAL system DVD-Audio and only the audio portion of the disc can be played.
≥Check the connection.
≥Make sure the television is on.
≥Ensure the television’s video input setting (e.g., VIDEO 1) is correct.
≥Go to Video in the SETUP menus, and change “TV Aspect” to suit your television.
≥Use the television to change the aspect to the correct one.
If your television cannot change the aspect when input is progressive, press
[PROGRESSIVE OUT] so the indicator goes out. Output will now be interlace.
≥The 4:3 TV ZOOM function is on.
≥Ensure that the unit is connected directly to the television, and is not connected through a video
cassette recorder.
≥Connect to the component video (480P) input terminals on a television compatible with this unit’s
copy guard system. You cannot view progressive video if your television is not compatible.
≥Press [PROGRESSIVE OUT] so the indicator goes out. This problem is caused by the editing
method or material used on DVD-Video, but should be corrected if you use interlace output.
≥Check the settings in the On-Screen Menu Icons’ Picture Menu.
≥Adjust the horizontal position in the On-Screen Menu Icons’ Picture Menu.Picture distorted.
No picture.
The picture shown on the
television is not normal.
(The sides of the picture are cut
off, the picture is stretched
horizontally, or black bands
appear at the top and bottom of
the screen.)
There is ghosting when
progressive output is on.
Picture quality is poor.
The picture is off center when
progressive output is on.
Troubleshooting guide
Operation
≥Some operations may be prohibited by the disc.
≥The unit may not be operating properly due to lightning, static electricity or some other external factor.Reset procedure:
Press [POWER Í] to switch the unit to the standby mode and then back to ON.
Alternatively, press [POWER Í] to switch the unit to the standby mode, disconnect the AC power
supply cord, and then reconnect it.
≥Check that the batteries are installed correctly.
≥The batteries are depleted: Replace them with new ones.
≥Point the remote control at the remote control signal sensor and operate.
≥Condensation has formed: Wait 1 to 2 hours for it to evaporate.
≥This unit cannot play discs other than the ones listed in these operating instructions.
≥You can only play DVD-Video if their region number is “1”, “ALL” or multiple region number
including “1”.
≥The disc may be dirty and require cleaning.
≥Ensure that the disc is installed with the label of the side to be played facing upwards.
≥Check that the DVD-RAM has something recorded on it.
≥Sequential Mode is on. Press [SEQUENTIAL] to turn Sequential Mode off.
≥This function is dependent on software availability.
≥Try selecting from the disc’s menu if one is available.
≥This function is dependent on software availability.
≥This function is dependent on software availability.
≥Subtitles are cleared from the television. Display the subtitles.
≥This function is dependent on software availability.
≥This function is  dependent on software availability. Even if a disc has a number of angles
recorded, these angles may be recorded for specific scenes only.
≥This feature does not work when the unit is outputting bitstream signals.
≥While stopped, press and hold [:] and [;] on the unit and then also press and hold [
						

							25
RQT6263
Reference
Glossary
BitstreamThis is the digital form of multi-channel audio data (e.g., 5.1 channel)
before it is decoded into its various channels.
DecoderA decoder restores the coded audio signals on DVDs to normal. This is
called decoding.
Dolby DigitalThis is a method of coding digital signals developed by Dolby Laboratories.
Apart from stereo (2-channel) audio, these signals can also be multi-
channel audio. A large amount of audio information can be recorded on
one disc using this method.
Dolby Pro LogicA surround system where a 4-channel audio track is recorded as 2
channels and then is restored to 4 channels for play. The surround channel
is monaural and can reproduce up to 7 kHz.
DTS (Digital Theater Systems)This surround system is used in many movie theaters around the world.
There is good separation between the channels, so realistic sound effects
are possible.
Dynamic rangeDynamic range is the difference between the lowest level of sound that can
be heard above the noise of the equipment and the highest level of sound
before distortion occurs.
Film and videoDVD-Videos are recorded using either film or video. Usually, film is
recorded at 24 frames per second, the rate movies are filmed at, while
video is recorded at 30 frames per second.
Frame still and field stillFrames are the still pictures that go together to make a moving picture.
There are about 30 frames shown each second.
One frame is made up of two fields. A regular television shows these fieldsone after the other to create frames.
A still is shown when you pause a moving picture. A frame still is made up
of two alternating fields, so the picture may appear blurred, but overall
quality is high. A field still is not blurred, but it has only half the information
of a frame still so picture quality is lower.
Interlace and progressive outputNTSC, the video signal standard, has 480 interlaced (I) scan lines,
whereas progressive scanning uses twice the number of scan lines. This is
called 480P. The video signals output from this unit’s COMPONENT
VIDEO OUT terminals (Y, P
B, PR) allow you to enjoy higher quality pictures
than if the signals were output from the VIDEO OUT terminal or
S VIDEO OUT terminal.
I/P/BMPEG 2, the video compression standard adopted for use with DVD-
Video, codes frames using these 3 picture types.
I: Intra coded picture
This picture has the best quality and is the best to use when adjusting
the picture.
P: Predictive coded picture
This picture is calculated based on past I or P-pictures.
B: Bidirectionally-predictive coded picture
This picture is calculated by comparing past and future I and P-pictures
so it has the lowest volume of information.
Linear PCM (pulse code modulation)These are uncompressed digital signals, similar to those found on CDs.Playback control (PBC)If a Video CD has playback control, you can select scenes and information
with menus (called menu play in these instructions).
6, 7
–
–
19
19
23
–
–
23
SoundPage
No sound.
Distorted sound.
Piercing noise comes from the
speakers.≥Check the connections.
≥Check the volume on the equipment you have connected.
≥Ensure that the input settings on the other equipment are correct.
≥Turn Advanced Surround off if it causes distortion.
≥Output from this unit will be in stereo (two channels) when Advanced Surround is on. Turn
Advanced Surround off if you are using three or more speakers.
≥If you have connected this unit to an amplifier through the AUDIO OUT terminals, go to the Audio
menu in the SETUP menu, and change “Speaker setting” to suit to your speakers. Select the
large or small icon for all the speakers you have connected.
≥Due to the specifications on some types of televisions, both video and audio may be cut off when
you turn the AUDIO ONLY feature on.
≥
If the “D.MIX” indicator on the display goes out while playing a multi-channel DVD-Audio disc,sound will only be output from speakers specified by the disc. Read the disc’s instructions for details.
≥If you have connected this unit to other equipment through the DIGITAL AUDIO OUT terminal,
ensure you have selected the correct settings for “Dolby Digital” and “DTS Digital Surround” in the
SETUP menus’ Audio menu.
≥You inserted a disc the unit cannot play; insert one it can.
≥You inserted a blank DVD-RAM.
≥Disc is dirty: Wipe it clean.
≥Trouble may have occurred. The number following “H” depends on the status of the unit.
Reset procedure:
Press [POWER Í] to switch the unit to the standby mode and then back to ON. Alternatively,
press [POWER Í] to switch the unit to the standby mode, disconnect the AC power supply cord,
and then reconnect it.
≥If the service numbers fail to clear, note the service number and contact a qualified service person.
“NoPLAY”
“CHECK”
“H∑∑”
∑∑ stands for a number.
Unit displays
5
–
5
–
–
“The progressive out is set to
“Disable””
“The software has a 4:3 aspect
ratio”
No on-screen display.
On-screen displays (including
On-Screen Menu Icons and disc
type information screen) not
displayed or only partially
displayed on the television.
The disc’s menu is displayed in
a different language.
Television displays
21
9
21
18
21≥Go to Video in the SETUP menus, and select “Enable” in “Progressive Out”.
≥Use the television to change the aspect to the correct one.
If your television cannot change the aspect when input is progressive, press
[PROGRESSIVE OUT] so the indicator goes out. Output will now be interlace.
≥Go to Display in the SETUP menus, and select “On” for “On-Screen Messages”.
≥Press [DISPLAY], and press [2, 1] to highlight the Bar Position icon, then press [3, 4] to adjust
the position.
≥Go to Disc in the SETUP menus, and select the preferred language for “Menus”. 
						

							26
RQT6263
Reference
Product Service
1. Damage requiring service—The unit should be serviced by qualified
service personnel if:
(a) The AC power supply cord or AC adaptor has been damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked change in
performance; or
(e) The unit has been dropped or the cabinet damaged.
2. Servicing—Do not attempt to service the unit beyond that described in
these operating instructions. Refer all other servicing to authorized
servicing personnel.
3. Replacement parts—When parts need replacing ensure the servicer
uses parts specified by the manufacturer or parts that have the same
characteristics as the original parts. Unauthorized substitutes may
result in fire, electric shock, or other hazards.
4. Safety check—After repairs or service, ask the servicer to perform
safety checks to confirm that the unit is in proper working condition.Product information
For product information or assistance with product operation:
Contact the Panasonic Customer Call Center at 1-800-211-7262,
or e-mail [email protected], or web site (http://
www.panasonic.com).
Limited Warranty
Panasonic DVD Player/Recorder
Limited Warranty
Panasonic Consumer Electronics Company,
Division of Matsushita Electric Corporation of America
One Panasonic Way Secaucus, New Jersey 07094Panasonic Sales Company, Division of Matsushita Electric
of Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5
San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or
workmanship, Panasonic Consumer Electronics Company or Panasonic Sales
Company (collectively referred to as “the warrantor”) will, for the length of the period
indicated on the chart below, which starts with the date of original purchase (“warranty
period”), at its option either (a) repair your product with new or refurbished parts, or (b)
replace it with a new or a refurbished product. The decision to repair or replace will be
made by the warrantor.
During the “Labor” warranty period there will be no charge for labor. During the “Parts”
warranty period, there will be no charge for parts. You must carry-in or mail-in your
product during the warranty period. If non-rechargeable batteries are included, they are
not warranted. This warranty only applies to products purchased and serviced in the
United States or Puerto Rico. This warranty is extended only to the original purchaser
of a new product which was not sold “as is”. A purchase receipt or other proof of the
original purchase date is required for warranty service.
Carry-In or Mail-In Service
For Carry-In or Mail-In Service in the United States call 1-800-211-PANA (7262) or visit
Panasonic Web Site: http://www.panasonic.com
For assistance in Puerto Rico call Panasonic Sales Company (787)-750-4300 or fax
(787)-768-2910.
PartsOne (1) YearOne (1) Year
Ten (10) Days
Product or Part NameDVD Player
DVD Recorder
Rechargeable Batteries,
DVD-RAM Disc (in exchange for
defective item)
LaborNinety (90) DaysOne (1) Year
Not Applicable
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or workmanship, and
DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO
DOES NOT COVER damages which occurred in shipment, or failures which are
caused by products not supplied by the warrantor, or failures which result from
accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty
installation, set-up adjustments, misadjustment of consumer controls, improper
maintenance, power line surge, lightning damage, modification, or commercial use
(such as in a hotel, office, restaurant, or other business), rental use of the product,
service by anyone other than a Factory Servicenter or other Authorized Servicer, or
damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “ LIMITED
WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL
OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As
examples, this excludes damages for lost time, travel to and from the servicer, loss of
media or images, data or other recorded content. The items listed are not exclusive, but
are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING
THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF
THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential
damages, or limitations on how long an implied warranty lasts, so the exclusions may not
apply to you.
This warranty gives you specific legal rights and you may also have other rights which
vary from state to state. If a problem with this product develops during or after the
warranty period, you may contact your dealer or Servicenter. If the problem is not
handled to your satisfaction, then write to the warrantor’s Consumer Affairs Department
at the addresses listed for the warrantor.
PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED
WARRANTY ARE YOUR RESPONSIBILITY.
1-800-332-5368 (Customer Orders Only)
Panasonic Services Company 20421 84th Avenue South, Kent,
WA 98032
(6 am to 5 pm Monday – Friday; 6 am to 10:30 am Saturday; PST)
(Visa, MasterCard, Discover Card, American Express, Check)
Web Site: http://www.panasonic.com
You can purchase parts, accessories or
locate your nearest servicenter by visiting
our Web Site.Accessory Purchases:
Service in Puerto Rico
Matsushita Electric of Puerto Rico, Inc. Panasonic Sales Company/Factory Servicenter:
Ave. 65 de Infanteria, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Phone (787) 750-4300 Fax (787) 768-2910
For Product Information, Operating Assistance, Literature Request, Dealer Locations, and
all Customer Service inquiries please contact:
1-800-211-PANA (7262), Monday–Friday 9 am–9 pm; Saturday–Sunday 9 am–7 pm, EST.
Customer Services Directory 
						

							ESPAÑOL
RQT6263
27
; POWER Í
SLEEP
SLOW/SEARCHSKIP
STOP PLAY
MENU TOPMENU
ENTER
DISPLAY
SUBTITLE
DISC DISC1 DISC2 DISC3
PROGRAM DISC4 DISC5
SEQUENTIAL
FL SELECT
AUDIO ONLYPAGEZOOMGROUPCANCEL AUDIO ANGLE
QUICK REPLAYRETURN SETUP
123
456
78
09
10
OPEN/CLOSE
PLAYLISTDIRECTNAVIGATOR
PAUSE
POWER
<
1
3,4,2, 1
ENTER
DISC1 DISC2 DISC3
DISC4 DISC5123
45
∫
DISC 1— DISC 5
SETUP
DISC
RETURN
Reproducción básica
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
Preparación
Encienda el televisor y seleccione en él la entrada de vídeo apropiada
según las conexiones del reproductor.
1Pulse [POWER 
Í ÍÍ Í
Í] para encender el aparato.Para salida progresiva
Pulse [PROGRESSIVE OUT] para que se enciendan los
indicadores.
2Pulse [
						

							Signal system:NTSC
Operating temperature range:i5 to i35 oC (i41 to i95 oF)
Operating humidity range:5 to 90 % RH (no condensation)
Discs played [8 cm (3 z) or 12 cm (5 z)]:
(1) DVD-RAM (DVD-VR compatible)
(2) DVD-Audio
(3) DVD-Video
(4) DVD-R (DVD-Video compatible)
(5) CD-Audio (CD-DA)
(6) Video CD
(7) CD-R/CD-RW (CD-DA, Video CD formatted discs)
(8) WMA/MP3
≥Maximum number of tracks and groups recognizable: 999 tracks
and 99 groups
≥Compatible compression rate:
WMA: between 48 kbps and 192 kbps
MP3: between 32 kbps and 320 kbps
Video output:
Output level: 1 Vp-p (75 ≠)
Output terminal: Pin jack (1 system)
S video output:
Y output level: 1 Vp-p (75 ≠)
C output level: 0.286 Vp-p (75 ≠)
Output terminal:  S terminal (1 system)
Component video output (480P/480I):
Y output level: 1 Vp-p (75 ≠)
P
B output level: 0.7 Vp-p (75 ≠)
PR output level: 0.7 Vp-p (75 ≠)
Output terminal: Pin jack (1 system)
(Y: green, P
B: blue, PR: red)
Audio output:
Output level: 2 Vrms (1 kHz, 0 dB)
Output terminal: Pin jack
Number of terminal:
2 channel: 1 system
5.1-channel discrete output (5.1 channel): 1 system
Audio performance:
(1) Frequency response:
≥DVD (linear audio): 4 Hz–22 kHz (48 kHz sampling)
4 Hz–44 kHz (96 kHz sampling)
≥DVD-Audio: 4 Hz–88 kHz (192 kHz sampling)
≥CD audio: 4 Hz–20 kHz
(2) S/N ratio:
≥CD audio: 115 dB
(3) Dynamic range:
≥DVD (linear audio): 102 dB
≥CD audio: 98 dB
(4) Total harmonic distortion:
≥CD audio: 0.0025 %
Digital audio output:
Optical digital output: Optical terminal
Pickup:Wave length: 658 nm/790 nm
Laser power: CLASS IIa/CLASS I
Power supply:AC 120 V, 60 Hz
Power consumption:16 W
Dimensions:430 (W)k406.5 (D)k75.8 (H) mm
[16
15/16z (W)k16z (D)k3z (H)]
Mass:4.5 kg (9.9 lb.)
Specifications
RQT6263-P
Printed in SingaporeF0502YM0
[Note]Specifications are subject to change without notice.
Mass and dimensions are approximate.Power consumption in standby mode: approx. 2.5 W
C 2002 Matsushita Electric Industrial Co., Ltd.
Panasonic Consumer Electronics
Company, Division of Matsushita
Electric Corporation of America
One Panasonic Way Secaucus,
New Jersey 07094
http://www.panasonic.com
Panasonic Sales Company,
Division of Matsushita Electric of
Puerto Rico, Inc. (“PSC”)
Ave. 65 de Infantería, Km. 9.5
San Gabriel Industrial Park, Carolina,
Puerto Rico 00985
pr
Manufactured under license from Digital Theater Systems,
Inc. US Pat. No. 5,451,942, 5,956,674, 5,974,380, 5,978,762
and other world-wide patents issued and pending. “DTS” and
“DTS Digital Surround” are registered trademarks of Digital
Theater Systems, Inc. C 1996, 2000 Digital Theater
Systems, Inc. All rights reserved.Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are
trademarks of Dolby Laboratories.
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and 4,819,098, licensed for limited viewing uses only.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.