Panasonic Dp Mb350 Operating Instructions Manual

4. Scanner31
4 Scanner
Scanner
4.1 Scanning from the unit (Push 
Scan)
You can easily scan the document by using the operation 
panel on the unit. You can select one of the following 
scanning modes depending on how you intend to use 
the scanned image.
– Viewing using Quick Image Navigator
*1/Multi-
Function Viewer*2 (Viewer)
– Saving as a file to your computer (File)
– Sending as an attached file to an email destination  from your computer (Email)
– Using OCR software (OCR)
– Sending as an attached...

4. Scanner
32
4.1.2 Scan to save as a file
1
Set the original (page 19).
2{Scan }
3Press  {V} or {^}  repeatedly to select  “PC”. i 
{ Set }
4For USB connection:
Press  {V} or {^}  repeatedly to select  “USB Host”. 
i  {Set }
For LAN connection:
Press  {V} or {^}  repeatedly to select the computer to 
which you want to send the scanned image.  i 
{ Set }
5Press  {V} or {^}  repeatedly to select  “File”. i 
{ Set }
6If necessary, change the scanning settings. Press 
{V} or {^}  repeatedly to select the...

4. Scanner33
1Set the original (page 19).
2{Scan }
3Press  {V} or {^}  repeatedly to select  “Email 
Address ”. i  {Set }
4Enter the destination email address.
Using navigator key:
Press  {V}, {^} , {< } or  {> } repeatedly to select the 
desired destination.
Using dial keypad:
1. Press  {V} or {^}  repeatedly to select 
“Temporary Address ”. i  {Set }
2. Enter the email address using the dial keypad 
(page 77).
5{Set }
6If necessary, change the scanning settings. Press 
{V} or {^}  repeatedly to select...

4. Scanner
34
4.2 Scanning from a computer 
(Pull Scan)
Note:L When scanning a document, we recommend using 
the scanner glass rather  than the automatic 
document feeder for better results.
L Do not open the document cover when scanning a 
document with the automatic document feeder.
4.2.1 Using Multi-Function scan 
application
By clicking an application icon, the selected application 
starts automatically after scanning.
1Set the original (page 19).
2Start Multi-Function Station.  i [ Scan ]
3Click the...

4. Scanner35
LYou can move, copy and delete a file or page.
4.2.3 Using other applications
Multi-Function Station includes a TWAIN and WIA 
compliant scanner driver. You can also scan using other 
applications that support TWAIN or WIA scanning. For 
scanning example, proceed as follows:
1Set the original (page 19).
2Start an application that supports TWAIN or WIA 
scanning.
3For TWAIN scanning:
Select  [Acquire Image... ] from the  [File ] menu.
For WIA scanning:
Select  [From Scanner or Camera... ]...

5. Copier
36
5Copier Copy
5.1 Making a copy
5.1.1 Using the scanner glass
1
If the {Copy } light is OFF, turn it ON by pressing 
{ Copy }.
2Set the original (page 19).
3If necessary, change the copy settings according to 
the type of document.
L To change the number of copies, see page 36.
L To select the contrast, see page 36.
L To select the resolution, see page 36.
L To select the zoom rate, see page 36.
4{Start }
L If the copy input tray prompt (feature #471 on 
page 68) is activated, select the...

5. Copier37
– N in 1 feature (page 40)
– Separate N in 1 feature (page 40)
– Booklet feature (page 41)
L You can hold the previous zoom setting (feature #468 
on page 67).
L When using the scanner glass,  the unit will only 
enlarge the right top corner of the document starting 
from the  m mark on the unit.
L When using the automatic document feeder,  the 
unit will only enlarge the center of the upper part of 
the document. To make an enlarged copy of the 
bottom of the document, tu rn the document...

5. Copier
38
5.2 More copying features
LMake sure that the  {Copy } light is ON.
5.2.1 Collate copy
The unit can collate multiple copies in the same order as 
the original document pages.
1Set the original (page 19).
2Press  {V} or {^}  repeatedly to select  “Copies”.
3Enter the number of copies (up to 99). i  {Set }
4{Advance }
5Press {V} or {^}  repeatedly to select  “Collate”.
6Press  {< } or  {> } repeatedly to select  “On”. i 
{ Set } i  {Advance }
7When using the scanner glass:
1.{Start }
L The...

5. Copier39
LOther copy settings are also available. See page 
36 for details.
6. When using the scanner glass:
1. {Start }
L The unit will scan 1 page.
2. Place the next document on the scanner glass 
and press  {Set }.
L The unit will start copying.
When using the automatic document feeder:
{ Start }
7. After you finish copying, press  {Stop } to reset this 
feature.
Note: L You can save the previous duplex setting (feature 
#470 on page 67).
To make 2-sided original s into 1-sided copies 
(automatic...

5. Copier
40
LOther copy settings are also available. See page 
36 for details.
7Quick ID copy feature:
1. {Start }
L The unit will scan 1 page.
2. Place the next document on the scanner glass 
and press { Set}. Repeat this until all the 
documents are scanned. L The unit will start copying.
L You can press  {Start } anytime to start 
copying.
Easy repeat feature:
{ Start }
8After you finish  copying, press {Stop}  to reset this 
feature.
Note: L You can save the previous page layout setting 
(feature...