Panasonic DP 8045 User Manual

							
61
Making Copies
23
4
Other jobs requiring memory
cannot be performed, while M5
is being used for the Double
Exposure function.Number of Copies
(Max. 999)
5
Back Side
of Original
67The following steps illustrate how to make
multiple copies when the Sort Mode is
selected. (See page 36)
1: YES Continues to copy another
original.
2: NO Starts making copies.
Downloaded From ManualsPrinter.com Manuals 
						

							
62
Making Copies
NOTE●Other jobs requiring memory cannot be performed, while M1 and M2 buttons\
 are being used for
the Skyshot mode.
● An incorrect position detection of the original may occur when a strong \
light shines onto the
glass during skyshot mode.
Skyshot allows copying a manuscript without
generating dark borders even if the Platen Cover or
ADF is opened. Two types of Skyshot modes can be
selected:
1) Digital Skyshot Mode : The scanning area (size)
is not pre-determined.
2) Manual Skyshot Mode : The scanning area (size) is pre-registered into memory (M1 and M2).
● An incorrect exposure may occur when there is a
black line at the edge of the original or  an image
which the copier interprets as a black pattern in
the skyshot mode.
Other Features
Digital Skyshot Mode
The Digital Skyshot has 2 modes.
The default setting of 06 Digital Skyshot Mode is “ Freeshp”.
Before using this mode, select each setting by
using the Function setting. (See page 73)
No : A copy is made without Digital
Skyshot.
Freeshp (Free shape) : A copy is made of the original,
even if it is of irregular shape, with
Digital Skyshot.
Parallel : A copy is made straightened if the
original is placed at an angle, with
Digital Skyshot. (within 5 degrees)
Manual Skyshot Mode
● Set 07 Manual Skyshot Mode in Copier Settings first.
(See page 73)
■
■ ■
■
■  Skyshot Mode
Downloaded From ManualsPrinter.com Manuals 
						

							
63
Making Copies
12
13
Open the ADF more than
45 degrees wide.
Number of Copies
(Max. 999)
Number of Copies
(Max. 999)
∗Default M1/M2 size can be changed
in the Function mode. (See page 80)
PlatenUpper-
Left
Corner
Custom size ∗
2
Downloaded From ManualsPrinter.com Manuals 
						

							
64
Making Copies
Other Features
The next copy job can be reserved even if the
current copy job is not completed.
1st job1st job
2nd job 2nd job
Copy
Reserve
11st job
or
5
or
Select Copy
Mode
62nd job
■
■ ■
■
■  Reserve a Job
Downloaded From ManualsPrinter.com Manuals 
						

							
65
Making Copies
23
5Select Copy Mode
Scanning is completed
4
Job Waiting List can be
confirmed with Job Queue.
(See page 18)
7
Downloaded From ManualsPrinter.com Manuals 
						

							
66
Making Copies
These modes save power while the copier is not in
use.
●The machine will not go into Sleep/Shutdown
Mode when the Weekly Timer is selected.
● 03 Sleep Mode/Shutdown Mode and timer setup
is performed in the Key Operator mode.
(See page 76)1Power Save Mode
Sleep/Shutdown Mode
Automatically enters the Sleep/Shutdown Mode
after 90 minutes (for DP-8060/8045), 15 minutes
(for DP-8035) from the last copy job. or
Indicator
Flash: Power Save Mode
Light: Sleep/Shutdown Mode
This mode can interrupt other copy jobs while
making copies.
or
Other Copy Job12
Other Features
■
■ ■
■
■  Energy Saver (Power Save Mode, Sleep/Shutdown Mode)
■
■ ■
■
■  Interrupt Mode
While making copy
Downloaded From ManualsPrinter.com Manuals 
						

							
67
Making Copies
2To clear
Other Copy Job
is completed
345
Downloaded From ManualsPrinter.com Manuals 
						

							
68
Function Parameters
General
Settings
General
Settings for
Key Operator Copier
Settings
Copier
Settings for
Key Operator Printer
Settings
Printer
Settings for
Key Operator Fax/Email
Settings
Fax/Email
Settings for
Key Operator Scanner
Settings
Input Password
General Settings:Changing the Initial Machine Modes
● Power On Default mode, Manual Add Toner, etc.
(See page 72)
For Key Operator:
Paper size, Finisher bin/Staple mode, Department
Counter, Network TCP/IP settings, etc.
(See pages 76-79)
Function
■
■ ■
■
■  Using Function Modes to Change the Initial Settings
Downloaded From ManualsPrinter.com Manuals 
						

							
69
Function Parameters
Copier Settings:Changing the Initial Copy Modes
●Default function of each copy mode
(See page 73)
For Key Operator:
Paper size priority, Original mode, Contrast, Job Build
and SADF mode, etc.
(See pages 79 and 80)
Printer Settings:Changing the Initial Printer Modes
●Default function of each print mode
(See page 75)
For Key Operator:
Job completion time, Page protection, Error page print,
Spool function, PS configuration, Font list print, Mailbox
data holding, etc.
(See page 81)
Scanner Settings:Changing the Initial Scanner Modes
●Original mode, Compression mode, Resolution, Job
Build and SADF mode, Address book, etc.
(See page 74)
Fax/Email Settings:Changing the Initial Fax/Email Modes
Refer to Operating Instructions (For Facsimile and Internet
Fax/Email Functions).
Downloaded From ManualsPrinter.com Manuals 
						

							
70
Function Parameters
■
■ ■
■
■  Procedure
NOTE● Please refer to the appropriate operating instructions manual for functi\
on settings on options.
12
Select the desired Function Mode Select the desired Function
3
Downloaded From ManualsPrinter.com Manuals