Panasonic DP 8045 User Manual

51
Making Copies
Paper Size∗
Paper Tray
Cover Page mode
Cover (Front) Cover (Front+Back)
Blank
Copy
Paper Size ∗
Paper Tray
Page Insertion mode
Blank
CopySet the insert page position with the
Keypad. ∗∗
If selecting other position, move
the sheet with
  /  buttons, then set
the insert page position with the Keypad.
34
Number of Copies
(Max. 999)
34
5
NOTE∗The size and orientation of the printed copy and recording paper should match.
∗∗Blank page is inserted before the indicated selected page number....

52
Making Copies
OHP2
21
+(2)(1)
+
OHP(2)OHP2OHP(1)(2)(1)21
+(2)(1)
+
OHP1
OHP1
OHP2
21
+
OHP(2)OHP2OHP(1)(2)(1)21
+
OHP1
OHP1
Inserts Blank/Copied pages between Transparency
film. Blank page
Copied page
Original Blank
page
Original Copied page
ADF only
Inserts Blank/Copied pages between Transparency
film and make copied sets for handouts.
Blank page
Copied page
Original Blank
page
Original Copied
page
ADF only
Hand-
outs
Hand-
outs
12
12
NOTE●Certain types of transparency film may not be compatible...

53
Making Copies
Paper Size∗
Paper Tray
OHP Interleaving mode
Blank
Copy
Number of Copies
(Max. 999)
Presentation modeBlank
CopyNumber of Copies
for handouts
(Max. 999)
Load
Transparency
film onto the
Sheet Bypass
Load
Transparency
film onto the
Sheet Bypass
345
345
(OHP: Transparency film)
(OHP: Transparency  film) Paper Size
∗
Paper Tray
NOTE∗The size and orientation of the printed copy and recording paper should \
match.
Downloaded From ManualsPrinter.com Manuals 

54
Making Copies
Insertion/Overlay
The first original is used as an overlay for the
remaining originals.
The first page is called the overlay original, and the
second page onwards are called the scanned
originals, respectively.
For overlay original
NOTE:
●When  MARGIN  is selected, a binding margin
is also set for the overlay original.
● When  COVER  or PAGE INSERTION  is
selected, if the cover page and insertion pages
are set to be copied, the overlay is not
executed for Blank pages. If these pages...

55
Making Copies
345
Density for 1st page imageorNumber of Copies
(Max. 999)From Platen:
Same procedure
as for Form
Overlay.
(See page 56 and
57)Select the overlay image to store
into memory for later use.
or
Enter File Name as below step 8
of File Edit.
34
Select a file
6
or
Enter the file
name
5
To cancel the registration,
touch CANCEL button.
Density for
registered
image
or
or
8
4
4
5
(Register only)
(Register only)
Downloaded From ManualsPrinter.com Manuals 

56
Making Copies
Insertion/Overlay
Overlay an image stored in memory onto the copy.
FORM
Data
The scanned
original
NOTE:
● Only Letter size is available for Form Overlay.
● If the orientation of the original is different than
of the Form, the original is copied by
automatically rotating when overlaid.
● The Form will not change size, and cannot be
enlarged or reduced.
However, the scanned original image can be
reproduced according to the selected settings
(Enlarged/Reduced using  ZOOM, or Paper
Size...

57
Making Copies
34
Select a fileNumber of Copies
(Max. 999)
From Platen:
If “Another Original? message is
displayed, touch the YES or “NO”
button.
Ex: 2 originals
Touch YES button.
Place the next original on the
Platen.
3Press Start Key.
4Touch NO button.
Downloaded From ManualsPrinter.com Manuals 

58
Making Copies
Other Features
Five Copy Jobs can be stored in Memory
(M1 to M5) for recall at a later time.Storing the
copy job
1To store a job inmemory
1To recall a job storedin memory
or
NOTE● JOB MEMORY mode will not be deleted even if the power switches are turned Off.
● When storing a new job into a programmed memory location, the previously stored job will be
overwritten and erased.
● M1, M2 can use as manual skyshot mode by setting the user function mode.
Recalling the
copy job
■
■ ■
■
■  Job...

59
Making Copies
2
M1, M2, M3, M4, M5(See NOTE on page 58)
23
M1, M2, M3, M4, M5
(See NOTE on page 58)Number of Copies
(Max. 999)
23
or
56
4
M1, M2, M3, M4, M5
Downloaded From ManualsPrinter.com Manuals 

60
Making Copies
NOTE●When using the double exposure mode, the M5 is turned On and other job requiring memory
cannot be used.
● The default setting of Double Exposure Mode is ON in the Copier Settings 19 Double
Exposure. If this setting is changed to OFF, this mode cannot be used\
.
Select  Double Exposure  copy mode when copying
a 2-Sided original that is smaller than Invoice size
onto one side of a standard size media (Ex: Letter
size). One side (Front) of the original is copied at the
top of the...