Panasonic DP 8016P User Manual

							71
Network Scanner
[06]SALES_3
10.74.252.66[05]SALES_2
10.74.252.66
ABBR
4
ABBR [_   ]
ENTER ABBR No.[01]SALES
10.74.252.66
ABBR No.
(2-digit)
DIRECTORY
SEARCH
4
ENTER LETTER(S)
_ENTER LETTER(S)
SA_
Enter letter(s)
ONE-
T
OUCH *
4
PANA
10.74.252.63
[01]SALES
10.74.252.66
Select a Station (PCs Address)
3-13-23-3
3-13-23-3
3-13-2
Keyboard (Option) NOTE
ONE-TOUCH  is
available when the
optional Keyboard (DA-
KB180) is installed.
3
3
5
Next Original
67
DATA IS BEING
TRANSFERRED TO PC
TRANSFER COMPLETED
ANOTHER ORIGINAL?
1:YES 2:NOPRESS START
LTR 
8
1:YES
Continues to scan another
original(s), repeat steps 5
and 6.
2:NO No next original.
Downloaded From ManualsPrinter.com Manuals 
						

							72
Network Scanner
■ Adding your PCs IP Address
If the Scanner Configuration is not set with the Communications Utility \
of Panasonic Document Management System
software, setup the Communications Utility software by following the ste\
ps below.
Address Book
1
Right-Click  Panasonic Communications
Utility  icon on the Task Bar, and then select
 Scanner Configuration... .
Check Auto Registration , and then enter the
Name and Key Name to be saved into the
machine. (Max. 15 characters)
1
2
2
1
Refer to right column.
2
Y ou can change the Name, and
Key Name in this window.
Downloaded From ManualsPrinter.com Manuals 
						

							73
Network Scanner
Click OK.
Click  Add Device  if
your PC address
information is registered
on the machines located
on a different subnet.
Enter the
machine’s
Device
Name, and
IP Address.
Click  OK.
2
3
2
3
Click  Add.
Click  OK.1
4
14
3
Downloaded From ManualsPrinter.com Manuals 
						

							74
Network Scanner
■ Scan Parameters (Scanner Settings)
Function
123
SEP-02-2006 04:28
READY TO SCAN FUNCTION       (1-2)
ENTER NO. OR 
∨ 
^
or
1: SET MODE
Refer to Function settings on page 61.
● Prints Scanner Settings List,
Sets Original Mode,
Sets Compression Mode,
Sets Resolution,
Sets Bind Position,
Sets File Type/Name
SCAN PARAM    (0-6)
ENTER NO. OR      ∨ 
^or
7
1:SCAN FILE NAME ?
PRESS SET TO SELECT
For Scan File Name
SCAN FILE NAME
ENTER NAME
FILE TYPE=TIFF
1:TIFF 2:PDF
or
FILE NAME=DATE&TIME1:DATE&TIME 2:CUSTOM
or
(When Selecting Custom)
Enter a File Name
(See page 70)
■  Select Mode
When adding a file name or selecting a compression format before scannin\
g document(s).
FUNCTION      (1-2)
ENTER NO. OR  ∨ 
^
or
2: SELECT
MODE
SEP-02-2006 04:28
READY TO SCAN
: TIFF
: PDF
123
678
: DATE & TIME
: CUSTOM
Downloaded From ManualsPrinter.com Manuals 
						

							75
Network Scanner
4
1:SET MODE ?
PRESS SET TO SELECT
5
SET MODE       (1-2)
ENTER NO. OR ∨ 
^
2:SELECT MODE?
PRESS SET TO SELECTSELECT MODE    (1-2)
ENTER NO. OR  ∨ 
^
6
2:SCAN PARAMETERS ?
PRESS SET TO SELECT
6
7
or : Scan File Name
: Compression
45
6
2:COMPRESSION ?
PRESS SET TO SELECT
For Compression
7
COMPRESSION : JBIG
 3:MMR  4:JBIG
: MH
: MR: MMR
: JBIG
or
or
Downloaded From ManualsPrinter.com Manuals 
						

							76
Network Scanner
■ Direct Connection (with Crossover Cable)
Direct Connection (with Crossover Cable)
Turn OFF ∗
 the Power
Switch (Machine and the
PC).
Connect a Crossover LAN Cable between your machine
and the PC.
LAN Cable (Crossover)
To   PC
(Right Side of Machine) (Rear Side of PC)
NOTE: Do not use Standard
LAN Cable.
Turn OFF ∗
 and ON the
Power Switch (Machine
and the PC). Input your PCs IP
Address into the Address
Book in the machine (see
page 72) or into the
Panasonic Document
Management System
software (refer to the
enclosed CD).Scan the document(s) to
your PC. (See page 70)
NOTE:
∗ If the Hard Disk Drive Unit (DA-HD18) is installed, see page 13.
LAN Cable
(Crossover)
To Machine
12
765
Downloaded From ManualsPrinter.com Manuals 
						

							77
Network Scanner
Turn On the Power Switch
(Machine and the PC). Input the Network Address
(Machine and your PC).
●
IP and Gateway Address ∗
IP: 192.168.0.1 (Machine)
192.168.0.2 (Your PC)
Subnet Mask: 255.255.255.0
(Machine & the PC)
● How to input the network address:
For your Machine: See page 66
For your PC: See below
For more detailed information, refer to Windows OS operating instruction\
s manual.
For Windows 2000
9
1
4
5
67Right click My Network
Places and select
Properties.2Right click Local Area
Connection and select
Properties.
3Select Internet
Protocol (TCP/ IP).
Click Properties.
Click OK.
4
7
5Select Use the
following IP address
then, Input IP Address
and the Subnet Mask.
Click OK.
6
For Windows XP
1Open the Control Panel.
3
2
2Select Switch to Classic
V iew, if using the
Category View Mode.
Select Network
Connections.
3
4
4Right click Local Area
Connection Enabled ........
and select Properties.
5Select the Internet
Protocol (TCP/ IP).
Click Properties.
Click CLOSE.
6
5
6
7Select Use the following IP
address then, Input IP
Address and the Subnet
Mask.
8
7
8
5
9Click OK.
3
34
5
OK will be changed to CLOSE. NOTE:
∗If you use the DHCP
server, select to disable
the DHCP server.
Machine: See page 55
Y
our PC: Consult your
System
Administrator.
Downloaded From ManualsPrinter.com Manuals 
						

							78
Problem Solving
Troubleshooting
CheckAction
Unit Does Not Operate
Check if the Power Switch (Main Power Switch
on the Right Side of the machine) is turned ON
and if the power cord is plugged into the AC
outlet.
Does the display light?
Press Energy Saver key on the control panel.
Does the Energy Saver key flash (or light)
and the display is turned OFF?
(See page 48)
Perform actions in accordance with each
message.
Does any of the U## codes and messages
appear on the display?
(U01, U07, U13, U14....etc.)
Add paper. (See page 14)
Does the Add Paper indicator and message
appear on the display?
Remove the misfed paper. (See pages 16 - 21)
Does the Misfed Paper indicator, message
and J## codes appear on the display?
T
urn the Power Switch on the Right Side of the
machine to the OFF and ON position. If the
error code does not clear, call your Service
provider.
Does E#-## codes and messages appear on
the display?
T
urn the Power Switch on the Right Side of the
machine to the OFF and ON position.
The machine would not accept the next job
during operation, instructed job would not be
accepted for a long time period or job would
not be completed.
Light Copies
Press the “DARKER” button.
Does the exposure indicator say “LIGHTER”?
Replace the Toner Bottle.
(See pages 16, 17)
Does the Add Toner indicator and message
appear on the display?
Downloaded From ManualsPrinter.com Manuals 
						

							79
Problem Solving
CheckAction
Marked Copies
Clean the Platen Glass or Sheet.
Is the machine’s Platen Glass or Platen Sheet
dirty?
Cover the original with a sheet of white paper
before copying or lighten the exposure setting.
Is the original an OHP film or a dark original?
■  If the measures outlined above do not solve the problem, call your Serv\
ice provider.
Machine Care
■ As a rule, clean weekly.Platen Glass/Platen Sheet
 Wipe marks off with a cloth and a neutral detergent.
 Wipe again with a dry cloth.Platen Sheet
Platen (Glass)
Adjusting the Double Feed Switch (For DA-AS181)
■When original(s) do not feed correctly, adjust the position of
the Double Feed Switch as follows:
Double Feed Switch
Position of
Switch
Normal Operation
Original does not feed.
Several originals are fed
at one time
Clean the Corona Wire of the Drum Unit.
(See page 16)
Check the copies.
If a dark vertical line is remained, repeat
above step to clean the Corona Wire
became dark vertical line is erased.
If a dark verical line of
0.8-1.2 inch (2-3 cm) in
width is printed.
Downloaded From ManualsPrinter.com Manuals 
						

							80
Problem Solving
Battery Holder
Remove 1 Screw.
Remove the Battery Holder.
Replacing the Battery/Set the Date and Time
The machine has an internal battery
(Product No.: CR2032) which maintains
the date and time.
In the event the battery requires
replacement, the following message will
be displayed.
T urn the Power Switch on
the Right Side of the
machine to the OFF
position.
If the Hard Disk Drive Unit
(DA-HD18)  is installed, see
page 13.
12
6
REPLACE BATTERY U90
10
09 KEY OPERATOR MODE
ENTER PASSWORD=
11
KEY OPR.MODE (00-34)
ENTER NO. OR      ∨ 
^
or
17 (DATE & TIME)
NOTE● The service life of the battery is approximately 1 year under normal use\
. 3-digit
(See page 13)
When setting the Date and Time, start
from step 6.
Set the Date and Time continues steps 6 to 13.
■
 Notice: California only:
This product contains a CR Coin Cell Lithium Battery which contains
Perchlorate Material - special handling may apply.
See 
www.dtsc.ca.gov/hazardouswaste/perchlorate
Downloaded From ManualsPrinter.com Manuals