Panasonic DP 2330 User Manual

							
21
Getting To KnowYour Machine
ADF TrayExit Unit
Misfed Paper
1
2
Misfed Paper
Remaining
Copies
Upper Cover
1
Misfed Paper
32
FinisherNOTE:
If the misfeed indicator(s) do not clear,
open the upper cover and remove all
misfed paper.
When using the Staple Sort, Shift-Sort
or Shift-Group mode,  remove the
remaining copies on the staple tray.
Then the copy job will restart.
345
6
8
3
9
Downloaded From ManualsPrinter.com Manuals 
						

							
22
Before Starting
As an ENERGY STA R® Partner, Panasonic has determined that this product meets
the 
ENERGY STA R® guidelines for energy efficiency.
This voluntary program specifies certain energy consumption and usage st\
andards.
This product will automatically “power down” after a specified per\
iod of non-use. The
use of this 
ENERGY STA R® compliant product will reduce energy consumption and
ultimately benefit the environment.
The default functions can be adjusted depending on your office requirements.
Please ask your authorized Panasonic dealer for more details.
Energy Star
Downloaded From ManualsPrinter.com Manuals 
						

							
23
Before Starting
1234567
1089
Contents
COPY Key
●  To  use the unit as a photocopier.
ENERGY SAVER Key
●  Saves power while the copier is not in use.
INTERRUPT Key
●  Interrupts other copy or print jobs while making copies.
FUNCTION Key
●  Use when changing the paper size, initial function values (default val\
ues) and key operator settings.
RESET Key
●  Resets all features to the initial power-on state.
CLEAR Key
●  Clears the copy count in the display.
STOP Key
●  Stops the copy run.
STATUS LED (RED)
●  Lights when trouble occurs. ∗∗
ACTIVE LED (GREEN)
●  Lights when machine is active.
PRINT DATA LED (GREEN)
●  Lights when receiving print data.
ORIGINAL
SIZE Keys COPY SIZE
Keys T
ouch Panel
Display Keypad START
Key
∗∗When the machine detects a problem or a status alarm is activated, the  \
8  Status LED lights
or begins to flash.
LED Lights: Machine detected a trouble status
  •  No paper in the selected tray or toner has run out.
  •  Machine detected trouble, such as paper misfed or jammed.
LED Flashes: Machine detected a status alarm
  •  No paper in the Tray. (Tray not selected)
  •  Toner is getting low, etc.
● The Control Panel displayed above shows only copier functions. Please re\
fer to the appropri-
ate operating instructions for other control panel functions.
∗Fax/Email ON LINE LED for optional Fax/Internet Fax functions
Print ON LINE LED for Printer function
No.
1
2
3
4
5
6
7
8
9
10
NOTE
Control Panel
Downloaded From ManualsPrinter.com Manuals 
						

							
24
Before Starting
To uch Panel Display
12345910
222423
12
15
16
20
21
17
18
28
27
26
25
29
13
14
118
67
19
NOTE●Use only soft finger pressure to activate the Touch Panel Display. DO NOT USE SHARP
OBJECTS such as pens, fingernails etc., as this may damage the panel.
● Touch Panel Display Brightness Adjustment:
To  adjust the brightness of the Touch Panel display, press and while holding down the  C
(CLEAR) key, keep pressing the  ORIGINAL SIZE/LEDGER or the  COPY SIZE/LEDGER
keys until the desired brightness is achieved.
ORIGINAL SIZE/LEDGER : Dimmer
COPY SIZE/LEDGER        : Brighter Job Status Indicator
Ex.: Copying 3 sets.
The Indicator displays the progress of a job task as follows:
0/3 
→ 1/3  → 2/3  → 3/3
Downloaded From ManualsPrinter.com Manuals 
						

							
25
Before Starting
Contents See Page
W arning Indications 14 - 17
      : Add Toner        : Add Paper     : Call Service (Call your Service Provider)      : Waste Toner
Original Icon —
Original Size Indication—
Job Build and SADF/Multi-Size Feed Mode Indication 38 and 39
Rotate Mode Indication—
Number of Copies / Original(s) —
Machine / User Error Code Indication (E1-01, U13, etc.) 16 and 17
Copy Icon—
Copy Size Indication—
Reserve a Job Button55
Finisher Functions Indication41
Machine Outline with Tray Selection (Paper Tray and Output Tray) —
Paper Level and Size Indication —
Paper Tray Selection Button —
Tandem/Remote Button Indication 29
Tandem/Remote Button 29
Output Tray Indication 15
Output Tray Button15
Density Indicator (7 steps) 15, 27, 73
Manual Exposure Select Buttons (Lighter and Darker) 15, 27, 73
Original Mode Select Button (Text; Text / Photo; Photo) 15, 27, 73
Copy Image and Paper Image Indication —
Copy Ratio Indication —
Original Image Indication—
Completion Notice Button33
Job Queue Button32
Job Settings Button —
• Selected copy jobs will be indicated on the right side of the touch pane\
l display.
(2-Sided/Original  → Copy, Sort/Finish, Zoom/Effects, Insertion/Overlay modes)
Proof Set Button 29
Function Categories —
■ Touch Panel Display Indications
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18 19
20
21 22
23
24
25
26
27
28
29
Downloaded From ManualsPrinter.com Manuals 
						

							
26
Making Copies
Basic Menu
■ Copying the Same Size Originals (1:1)
Copy size is automatically selected.
100%
If set in other
function mode
or
If original size
is not detected
■ Using the ADF
ADF
Upper Limit
Indicator
Upper Limit Guide
Set the originals up to the
upper limit indicator/Guide.
ADF Tray
Original Guides
Adjust to the original’s width
NOTE● During the copy operation and after making copies, the fan motor may sta\
rt spinning. This is a
normal operation and is used to cool down the copier.
■ Copying on Heavy Paper (Post Cards, etc.) (35 lb max.)
Load paper
on the Sheet
BypassSelect Sheet Bypass and
touch the Size Change button
34
5
Select Heavy Paper
12
123
4
 Originals that cannot be used
● Post Cards,  Drawing Papers, Transparencies,  Labelling
Papers, Heavyweight Papers, Thin Art Papers,  Film Thermal
Papers
Inappropriate Originals
● Paper with a smooth surface such as glossy and coated
papers
● Originals with a Lead Edge that is ripped, creased, folded,
punched, or glued.
● Mixed width size Originals (except a combination of Ledger
and Letter, Letter and Legal)
● Paste-ups
● Pressure sensitive or carbon backed papers
● Paper with excessive curl
● Stapled originals
● Freshly printed copies from a laser printer
● Originals with fresh White-Out (Liquid paper correction fluid)
Downloaded From ManualsPrinter.com Manuals 
						

							
27
Making Copies
Adjust the Manual Exposure
  or  
Select type of Original(s)
Mainly Text
Text and Photo
combined
Mainly Photo
Number of Copies
(Max. 999)
• Cover
• Page Insertion
• OHP Interleaving
• Presentation
• Overlay
(See pages 48-51)
Features
Automatic Original FeedingDuplex CopyingInsertion/Overlay
2-Sided originals
2 or 1-Sided copy
automatically
(See pages 34 and 35)
Feeds originals automatically
Up to 50 Letter size (20 lb)
(up to 30 Legal or Ledger size)
Automatic original size detection
Invoice to Ledger
NOTE● Memory Capacity:
If memory overflows during original scanning, the message  “Cannot Co\
mplete / Job
Exceeds Memory Capacity” will be displayed on the LCD. If this occurs\
, follow the instructions
on the LCD.
When additional memory is required, consult with an authorized service p\
rovider.
34
■ Position of the original(s)
From ADF/i-ADF From Platen
Downloaded From ManualsPrinter.com Manuals 
						

							28
Making Copies
Basic Menu
100
copies
50
copies50
copies
+
100 copies
2 1100
■ Copying with Preset Ratios
Letter
Ledger LetterLedger oror
If original size
is not detected
■ Proof Copying
or
Allows you to make one proof set, before
proceeding to copy a large multi-set with
various settings.
Proof copy
Multi copy
Select Copy Job settings
■ Tandem/Remote Copying
or
Requires installation of optional Hard Disk Drive (DA-
HD30) and additional Image Memory (DA-SM16B/
SM64B/SM28B), Network setup (See pages 62 and
68) and Parameter registration. (See page 30)
Select Copy Job settings
Remote Copying
Tandem Copying
Other copier Other copier
This copier
Stationor
NOTE●If the desired copy size is different from the paper size loaded in the Paper Tray, use Sheet
Bypass. (See page 14)
The selected Remote printing copier, must be either DP-2310, DP-2330, DP-3010 or DP-3030.
For the copier to function as a Remote/Tandem Copier it has to be setup in advance.
12
12
12
5
Downloaded From ManualsPrinter.com Manuals 
						

							
29
Making Copies
ORIGINALCOPY SIZE
SIZE Ledger Legal Letter-RInvoice-R
Ledger 100 77 65 50
Legal 121 100 79 61
Letter-R 129 100 100 65
Invoice-R200 155 129 100
The Correct ratio is automatically selected.
Reduction and enlargement ratios (%)
Number of Copies
(Max. 999)
Number of Copies
(Max. 999)
If the Proof copy is OK,
the remaining number
of sets will be printed.
If the Proof Copy is NG,
again, place the originals
back on the ADF (or
Platen) and try again.
or
Number of Copies
(Max. 999)
NOTE●
Press the PROOF SET button again if the Proof Copying mode was reset.
For Tandem
For Remote
34
345
34
5
67
Downloaded From ManualsPrinter.com Manuals 
						

							
30
Making Copies
Basic Menu
■ Tandem/Remote Copy Settings (Registration 1)
Input the Key Operator ID Code if required.
Input ID Code
(4-digit)
Enter the key name
(up to 15 characters).
■ Tandem/Remote Copy Settings (Registration 2)
If either DP-2330 or DP-3030 is installed
on a Network with a different subnet mask,
the DP-2330 or DP-3030 must be regis-
tered first, before being able to use the
Tandem/Remote Copying function.
Scroll to
04/04
IP Address
Ex: 123.123.12.1
When entering a 1 or 2-digit number
segment, add “00” or “0” in front of the
number, to scroll to the next segment of
numbers or press the “
“ key to enter a
period after the number.
■  Tandem/Remote Copy Settings (Editing)
To  edit the registered machine’s settings
(IP Address, machine name or key name).Open the screen
04/04 same as
the Registration
procedures above.
■  Tandem/Remote Copy Settings (Deleting)
To  delete the registered machine.Open the screen
04/04, same as
the Registration
procedures above.
1
4
7
12
56
12
12
Downloaded From ManualsPrinter.com Manuals