Panasonic Dmr T6070 Operating Instructions Manual

11
RQT7559
Getting started
The unit begins trying various IR codes to see which one 
communicates properly with your cable TV box. It’s quite 
common for this phase of the setup to be repeated numerous 
times.
–If the cable TV box has changed to channel 09, select “Yes” and 
press [ENTER].
–If the cable TV box is still set to the same channel, select “No” 
and press [ENTER]. Repeat this step until the cable TV box 
changes to channel 09.
∫The set contents are displayed together
–If the information is...

12
RQT7559
Getting started
STEP 3Set up to match your television and remote control
You do not have to change the setting when connected to a 4:3 
standard aspect television that is not compatible with progressive 
output (➡page 53).
1Press [SETUP].
2Press [3,4] to select “TV Screen” 
and press [1].
3Press [3,4] to select “TV Type” and 
press [ENTER].
≥Aspect 4:3/Aspect 16:9:
≥480P/480I:
Select “480P” if the television is compatible with 
progressive output.
4Press [3,4] to select the item and 
press...

13
RQT7559
Getting started
Change the remote control code on the main unit and the remote 
control (the two must match) if you place other Panasonic products 
close together.
Use “1”, the factory set code, under normal circumstances. 
1Press [SETUP].
2Press [3,4] to select “Set Up” and 
press [1].
3Press [3,4] to select “Remote 
Control Code” and press [ENTER].
4Press [3,4] to select the code (1, 2, 
or 3) and press [ENTER].
5To change the code on the remote control
While pressing [ENTER], press and...

14
RQT7559
Getting started
HDD, disc and card information
≥We recommend using Panasonic discs and cards. DVD-R from other manufacturers may not be recorded or played due to the condition of the 
recording.
∫Which should I use, DVD-RAM or DVD-R?
The following chart indicates the differences. Select based upon what you require.
§1You can erase, enter name and change thumbnail. Available 
space does not increase after erasing.
§2Only on DVD-RAM compatible players.§3After finalizing the disc (➡page 45,...

15
RQT7559
Getting started
≥You can use SD Memory Cards with the following capacities (from 8 MB to 1 GB).
Please confirm the latest information on the following website.
http://panasonic.co.jp/pavc/global/cs
(This site is in English only.)
≥If the SD Memory Card is formatted on other equipment, the time spent for recording may become longer. Also if the SD Memory Card is 
formatted on a PC, you may not be able to use it on this unit. In these cases, format the card on this unit (➡page 45, 
53).
≥This...

16
RQT7559
Recording
Recording television programs
[HDD] [RAM] [DVD-R]
≥It is not possible to record to both HDD (Hard Disk Drive) and DVD 
drive simultaneously.
≥You can record up to 500 titles on HDD, 99 titles on one disc.
≥It is not possible to record continuously from one side of a double 
sided disc to the other. You will need to eject the disc and turn it 
over.
≥W
hen using 8 cm (3″) DVD-RAM, remove the disc from the cartridge.≥It is not possible to record CPRM (➡page 53) protected material 
onto...

17
RQT7559
Recording
∫To specify a time to stop recording—One Touch 
Recording
During recording
Press [¥REC] to select the recording time.
Each time you press the button:
≥This does not work during timer recordings (➡page 19) or while 
using Flexible Recording (➡page 18).
To stop recording partway
Press [∫].
Off Timer
The unit switches to standby after about 6 hours in the stop mode. 
You can turn this feature off or change the time to 2 hours 
(➡page 47, “Off Timer”).
Depending on the content being...

18
RQT7559
Recording
Recording television programs
Refer to the control reference on page 16.
[HDD] [RAM]
You can change the drive and play while recording on this unit. Also, 
while recording to the HDD or to DVD-RAM you can view the title 
being recorded from the beginning as well as play a recorded title.
Press [1](PLAY).
Time Slip indicator on the main unit lights.
1Press [DIRECT NAVIGATOR].
2Press [3,4,2,1] to select a title 
and press [ENTER].
Time Slip indicator on the main unit lights.
To exit...

19
RQT7559
Recording
Timer recording
[HDD] [RAM] [DVD-R]
You can perform timer recording easily by just marking the desired 
program(s) in a television program list.
≥You can enter up to 8 days in advance.
≥The program name becomes the recorded title if the program is 
listed on the television program list.
1Press [TV GUIDE].
2Press [3,4,2,1] to select the 
program.
≥To skip one screen
Press [PAGE XCHW].
≥To skip 24 hours in the list
Press [3,4,2,1] to select “LISTINGS” and:
Press [CHAPTER] (Green)...

20
RQT7559
Recording
Timer recording
Refer to the control reference on page 19.
1Press [PROG/CHECK].
2Press [CHAPTER] (Green).
3Enter the settings.
≥To enter the date
Press [3,4] to select “Date” and press the numbered 
buttons.
(Date: Month/Day/Year)
≥To enter the time
Press [3,4] to select “Start Time” or “End Time” and press 
the numbered buttons.
–You can set up to 8 hours.
–To change am/pm
Press [2,1] to select “am” or “pm” and press [DUBBING] 
(Blue).
≥To enter the channel
Press [3,4] to select...