Panasonic Dmr Ez27 Operating Instructions Manual

							21
Advanced Features
RQT8851
Picture Properties
While playing a picture
  twice to display picture properties.
11/30  12:03 AM
11/26/2004 Date 002/030No.
Shooting Date
  again to exit.
 Notes
Depending on the camera or editing software, shooting dates may 
not be displayed correctly.
Playing MP3s
CD
  to select the DVD drive.
 
Track list is shown. –
A:Group No.
B:Track No. in the group
C:Track No./Total tracks in 
all groups
001-Both Ends Freezing
002-Lady Starfish
003-Life on Jupiter 
004 Metal Glue 11    :  My favorite
2
3
4 Total TrackTreeG            1
T             1Total        1/111
MenuGroup No.
No.09
ABC
Selected group
 e, r to select a track, then  
to play.
 Tips
“” indicates the track currently playing.
To stop playing
Press [g STOP].
To exit the menu screen
Press [DIRECT NAVIGATOR].
To view other pages
Press [u, i].
To select the track with the numbered buttons
e.g., “5”:  [0] ➔ [0] ➔ [5]
   “15”:  [0] ➔ [1] ➔ [5] •
•
Using the Tree Screen to Find a Group
From the track list
 q while a track is highlighted to 
display the tree screen.
A:
Selected Group No. /Total Group No.
If the group has no compatible track, “--” 
is displayed as the group number.
B:
Selected Group
Tree Track Total
11   :  101Group No.MenuG1T1Total1/49
No.--09
CD-RW for Check
/JPEG/
/JPEG/JPEG1/
/JPEG/JPEG2/
/MP3/
/MP3/MP3 group1/
/MP3/MP3 group2/ (&WMA)/
/MP3/MP3 group3/ (Layer)/G1/3Tree
B
ATree Track Total
11   :  101Group No.MenuG1T1Total1/49
No.--09
CD-RW for Check
/JPEG/
/JPEG/JPEG1/
/JPEG/JPEG2/
/MP3/
/MP3/MP3 group1/
/MP3/MP3 group2/ (&WMA)/
/MP3/MP3 group3/ (Layer)/G1/3Tree
B
A
 e, r to select a group, then 
The track list for the selected group appears. –
 Notes
When there is a large amount of still picture data etc. within an MP3 
file, play may not be possible.
You cannot operate the scroll bar that appears in the tree screen.
 Tips
To return to the track list
Press [RETURN].
 The screen shown below is displayed when you insert a disc 
containing MP3 files, DivX video contents and still pictures 
(JPEG).
e.g.,
Playback mode is set to DivX.
To play another type of files,
please select playback mode
from Menu in FUNCTIONS.
ENTER
1.  Press [ENTER] to exit the screen.
2. Press [FUNCTIONS].
3. Press [e, r] to select “Menu”, then press [ENTER].
4. Press [e, r] to select “MP3 Music”, then press [ENTER]. •
• 
						

							22
RQT8851
Playing DivX
-R -R DL CD
  to select the DVD drive. 
 
SSUB MENUSelectNo.--09
DivX Menu
     DVD(DivX)Folder            1   :  VIDEO
ENTERNextPrevious
DivX Recordings No. Tree
001 Movie01.avi
002 Movie02.avi
003 Movie03.avi
004 Movie04.avi
005 Movie05.avi
006 Movie06.avi
007 Movie07.avi
008 Movie08.avi
009 Movie09.avi
010 Movie10.avi
Page 001/003 Recordings : 020
DivX file list is shown.
 e, r to select the recording, then 
 Notes
You can play CD-R/CD-RW and DVD-R, DVD-R DL discs which 
contain DivX video contents that have been recorded on a 
computer.
Picture sizes set at the time of recording may prevent the unit from 
showing pictures in the proper aspect ratio. You may be able to 
adjust the aspect ratio through the TV.
Successive play is not available.
 Tips
To view other pages
Press [u, i].
To stop playing
Press [g STOP].
To exit the menu screen
Press [DIRECT NAVIGATOR].
To select the recording with the numbered buttons
e.g., “5”:  [0] ➔ [0] ➔ [5]
   “15”:  [0] ➔ [1] ➔ [5]
CD When you insert a disc containing MP3 files, DivX video 
contents and still pictures (JPEG), the files selection screen 
appears. (➔ 21, Tips)
 
Press [ENTER].
Using the Tree Screen to Find a Folder
From the DivX file list
 q while a recording is highlighted 
to display the tree screen.
A:
Selected folder No./Total folder No. 
including DivX recording
B:
Selected folder
•
•
•
•
 e, r to select a folder, then 
The file list for the folder appears. –
 Notes
You cannot operate the scroll bar that appears in the tree screen.
 Tips
To return to the previous screen
Press [RETURN].
Regarding DivX VOD content
DivX Video-on-Demand (VOD) content is encrypted for copyright 
protection. In order to play DivX VOD content on this unit, you first 
need to register the unit.
Follow the online instructions for purchasing DivX VOD content to 
enter the unit’s registration code and register the unit. For more 
information about DivX VOD, visit www.divx.com/vod.
Display the unit’s registration code(➔ 38, “DivX Registration” in the “Setup” menu)
Setup
Channel
Disc
Video
Audio
Display
TV Screen
DivX Registration
DivX ( R ) Video On Demand
Setup
ENTER
Your registration code is :  XXXXXXXX
To learn more visit www.divx.com/vod8 alphanumeric characters
After playing DivX VOD content for the first time, a new registration 
code is then displayed in “DivX Registration”. Do not use this 
registration code to purchase or rent DivX VOD content. If you use 
this code to purchase (rent) DivX VOD content, and then play the 
content on this unit, you will no longer be able to play any content 
that you purchased (rented) using the old code.
If you purchase or rent DivX VOD content using a registration 
code different from this unit’s code, you will not be able to play that 
content. (“Authorization Error.” is displayed.)
Regarding DivX content that can only be played a set 
number of times
Some DivX VOD content can only be played a set number of 
times. When you play this content, the remaining number of plays 
is displayed. You cannot play this content when the number of 
remaining plays is zero. (“Rental Expired.” is displayed.)
When playing this content
The number of remaining plays is reduced by one if:
– you press [^ DVD POWER].
– you press [g STOP].
– you press [u]. 
– you press [t, y] etc. and arrive at the end of the content or 
the start of the content being played.
– you press [DRIVE SELECT] to change the drive.
– you press [DIRECT NAVIGATOR].
Resume play function does not work. •
•
•
•
•
Playing Still Pictures (JPEG), MP3 and DivX 
						

							23
RQT8851
Advanced Features
RAM -RW(VR)
You cannot create or edit playlists on this unit. However, 
you can play a playlist that has been created or edited 
on other equipment.
  to select the DVD drive.
With the unit stopped
 
 e, r 
to select “Other Functions” 
then 
PlaybackProgramDelete
Other Fanctions
PlaylistsFlexible RecordingDV Camcorder Rec.Setup DVD Management
FUNCTIONS
Cartridge Protection   Off
Disc Protection   OffDVD-RAM
ENTER
 e, r 
to select “Playlists”, then 
 e, r, w, q to select the playlist 
to play, then 
Playlist Properties
After selecting a playlist (step 5)
 
 e, r 
to select “Properties”, then 
Playlist information (e.g., length and date) is 
shown. –
View Chapters
After selecting a playlist (step 5)
 
 e, r 
to select “View Chapters”, 
then 
8 e, r, w, q to select the chapter, 
then 
 Tips
To return to the playlist screen
Press [SUB MENU], then select “View Playlists” and press [ENTER].
To view other pages
Press [u, i].
Playing Playlists 
						

							24
RQT8851
Recording from a VCR, etc.
Connect cables while the power to both the unit and 
the external device is off.
Front of the unit
Yellow  White  Red
You can get a 
sharper, clearer 
picture by 
connecting with 
an S Video 
cable instead of 
the yellow video 
cable.
Audio/Video 
cable S Video cable
RAM -R -R DL -RW(V) +R +R DL +RW
Preparation:
Turn on the unit and connected equipment.
RAM If the disc is protected, release protection 
(➔ 44).
When recording multilingual broadcasts (➔ 11) •
•
•
  to select the DVD drive.
  Insert a disc.
  to select the recording 
 mode (➔ 12).
 
 e, r to select the input where 
your external device is connected, 
then 
Front panel inputs are IN2. –1
ENTER
TV
2 IN1
3 IN2
4DVInput Select
1
ENTER
TV
2 IN1
3 IN2
4DVInput Select
  Start play on the external device.
  at the point you want to 
start recording to the disc.
 Tips
You can also connect to the IN1 on the rear.
If the audio output of the other equipment is monaural, connect to 
L/MONO on the IN2 input terminals at the front. •
•
Recording from an External Device 
						

							25
Advanced Features
RQT8851
Recording from a DV Camcorder
Connect the cable while the power to both the unit and 
the external device is off.
Front of the unit
4-pin DV Cable
RAM -R -R DL -RW(V) +R +R DL +RW
Preparation:
Turn on the unit.
RAM If the disc is protected, release protection 
(➔ 44). •
•
  to select the DVD drive.
  Insert a disc.
  to select the recording 
 mode (➔ 12).
  Turn on the DV equipment and 
pause play on the DV equipment 
at the point you want recording to 
start.
“DV camcorder connection” screen may appear.DV camcorder connectionDV connection detected.
Start recording ?
CancelRecord to DVD
ENTER
When “DV camcorder connection” screen does 
not appear
Perform steps 1–4 (➔ left)
1. With the unit stopped
Press [FUNCTIONS].
2. Press [e, r] to select “Other Functions” then press [ENTER].
3. Press [e, r] to select “DV Camcorder Rec.” then press 
[ENTER].
You can proceed to step 6 (➔ below).
 w to select “Record to DVD”, then 
press 
 w to select “Rec.”, then 
 Notes
If the desired audio is not recorded, select the kind of audio for 
“Select Audio Channel For DV Input” in the Setup menu (➔ 39).
RAM Programs are recorded as a single item; breaks in the images 
create chapters.
If you use video camcorders from other manufacturers, these are 
not guaranteed to work.
It is not possible to operate the unit from the connected DV 
equipment.
The DV equipment name may not be shown correctly.
Date and time information is not recorded, even if displayed on the 
camcorder.
The DV IN terminal is not meant to be connected to a computer.
This unit uses a 4-pin “DV IN” connector;
Your DV camcorder may use a 4-pin or 6-pin external connector. 
Please consult your DV camcorder’s manufacturer to confirm 
correct external connection.
You cannot record and play simultaneously.
 Tips
When recording finishes
The confirmation screen appears.
Press [ENTER] to finish DV camcorder recording.
To stop recording
Press [g STOP].
The confirmation screen appears. Press [ENTER].
If the DV camcorder recording function does not work properly, check 
the connections and DV equipment settings, and turn the unit off and 
back on. If that does not work, follow the instructions on page 24. •
•
•
•
•
•
•
•
• 
						

							26
RQT8851
Linked Operations with the TV (EZ Sync™ “HDAVI Control™”)
You can enjoy linked operations with the TV and receiver by using “HDAVI Control”.
What is EZ Sync “HDAVI Control”?
EZ Sync “HDAVI Control” is a convenient function that offers linked operations of this unit, and a Panasonic 
TV (VIERA) or receiver under “HDAVI Control”. You can use this function by connecting the equipment with the 
HDMI cable. See the operating instructions for connected equipment for operational details.
EZ Sync “HDAVI Control”, based on the control functions provided by HDMI which is an industry standard 
known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and 
added.  As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be 
guaranteed.
This unit supports “HDAVI Control 2” function. 
“HDAVI Control 2” is the newest standard (current as of February, 2007)
for Panasonic’s HDAVI Control compatible equipment. This standard is compatible with Panasonic’s 
conventional HDAVI equipment. •
•
Preparation:
1. Connect this unit to your TV or receiver with an HDMI cable (➔ 53).
2. Set “EZ Sync” to “On” (➔ 40). (The default setting is “On”.)
3. Set the “HDAVI Control”  operations on the connected equipment (e.g., TV).
• When using HDMI2 terminal of VIERA as “HDAVI Control” , set the input channel to HDMI2 on VIERA.
4. Turn on all “HDAVI Control”  compatible equipment and select this unit’s input channel on the connected TV so 
that the “HDAVI Control” function works properly.
 When the connection or settings are changed, repeat this procedure.
(When the TV is on) 
Automatic input 
switchingWhen the TV is on and the following operations are performed, the TV’s input will 
automatically switch to HDMI input mode and the TV displays the corresponding 
action.
(Picture or sound may not be available for the first few seconds.)
Press [FUNCTIONS]*
1, [q PLAY]*2, [DIRECT NAVIGATOR], [SCHEDULE] etc.
(When the TV is off)
Power on linkWhen the TV is off and the following operations are performed, the TV will 
automatically turn on and displays the corresponding action.
(Picture or sound may not be available for the first few seconds.)
Press [q PLAY]*
2, [DIRECT NAVIGATOR], [SCHEDULE] etc.
DVD-V *3 etc.The TV is automatically turned on when you insert the discs.•
Power off link 
When you turn the TV off, this unit is also automatically turned off. This unit 
automatically turns off even if the FUNCTIONS screen, the status message or the 
on-screen menu is displayed, during playback.
Even if the TV is turned off, this unit will not turn off at the same time under the 
following conditions:
when you press [* REC] and this unit is recording, 
when scheduled recording is proceeding
when copying
when finalizing, etc.
When this unit is connected to an “HDAVI Control” compatible Panasonic receiver with an HDMI cable, 
the receiver will also turn off. –
–
–
–
•
*
1 This button is available only when this unit is on.
*2 When this button is pressed, the playback image is not immediately displayed on the screen and it may not be possible to watch the contents 
from where playback started.
  In this case, press [u] or [t] to go back to where playback started.
*
3 Depending on discs, the TV may not automatically turn on.
 Notes
These functions may not work normally depending on the equipment condition.
About “HDAVI Control” function, read the operating instructions of the connected equipment (e.g., TV) too. •
• 
						

							27
Advanced Features
RQT8851
Easy Control only with VIERA Remote Control
If you connect this unit to the TV that has “HDAVI Control 2” function with an HDMI cable, you can operate both units 
more conveniently.
You can operate this unit using the following buttons on the TV remote control.
[e, r, w, q], [OK], [RETURN], [SUB MENU].
Use the remote control for this unit to operate any other buttons (numbered buttons, etc.) that are not listed above.
Using the FUNCTIONS 
window to operate 
this unitRefer to TV operating instruction for operating the TV.
 Display this unit’s “FUNCTIONS” window using the TV 
remote control.
      
If this unit is set to off, it will automatically turn on. •
 Select the item you want to
operate with the TV remote
control, then 
Using the SUB 
MENU window to 
operate this unit
By using the TV remote control, you can play discs using the “Control Panel” 
(➔ below) and select the drive (DVD or SD).
Control PanelControl Panel is displayed 
(➔ below).
FUNCTIONSFUNCTIONS window is displayed 
(➔ above).
Top Menu DVD-V Top menu is displayed (➔ 17).
Menu DVD-V Menu is displayed (➔ 17).
Drive SelectSelect the DVD or SD drive.
Rotate Right  (JPEG)Rotate the still picture (➔ 20).
Rotate Left  (JPEG)
Zoom In (JPEG)
Enlarge or shrink the still picture 
(➔ 20).
Zoom out  (JPEG)
 
 e.g.,
 
FUNCTIONS
Drive Select Control Panel
ENTER
 Select an item, 
then 
Using the Control 
Panel
Using the Control Panel, you can operate search backward, search forward, stop, 
etc. with the TV remote control.
Perform steps 1 and 2 of “Using the SUB MENU window to operate this unit”.
The Control Panel is displayed (➔ right)
While playing a recording or DVD-Video, etc.
[e]: Pause, [r]: Stop, [w]: Search backward, [q]: Search forward, 
[OK]: Play, [EXIT]: Exit the screen.
While playing still pictures
[r]:Stop, [w]: View previous picture, [q]: View next picture, 
[EXIT]:Exit the screen. –
–
g When you want to leave the TV on and turn off only this unit
Press [^ DVD POWER] on this unit’s remote control to turn off.
g When not using “HDAVI Control”
Set “EZ Sync” in the Setup menu to “Off ” (➔ 40).About the FUNCTIONS window (➔ 60)
PlaybackProgramDelete
Other Functions
FUNCTIONS
Cartridge Protection   Off
Disc Protection   OffDVD-RAM
ENTER
About the FUNCTIONS window (➔ 60)
PlaybackProgramDelete
Other Functions
FUNCTIONS
Cartridge Protection   Off
Disc Protection   OffDVD-RAM
ENTER
Pause
StopPlay
Exit Search SearchControl PanelPause
StopPlay
Exit Search SearchControl Panel 
						

							28
RQT8851
The following messages and displays appear to let you 
know what operations are being performed and the 
status of the unit.
Press [STATUS] to cycle through available displays.
1:45  SP 12/24  6:34 PM
CH 4-1
KPO-SDNow: FOOTBALL FOCUS
No Display
Next: BASEBALL
PG: NR
T12   0:01.23  SPg ggT12    0:12.34  SP
Rec.
English
Tray Open
DVD-RAM
4 - 1 KPO-SD
Rec.
English
Tray Open
DVD-RAM
4 - 1 KPO-SD
Remain
(1)
(2)
(3)
(4)
(5) (6)
(8) (7)
(12)(13)(14) (9) (10) (11)
12:00am - 1:00pm
  1:00pm - 2:00pm
–
g Display  examples
(1) Current  media
(2) Status of the disc
(3) Channel  information
(4) Status of the disc when SD drive is selected
(5) The current date and time
(6) Remaining recording time and recording mode
  (e.g.: “1:45 SP” indicates 1 hour and 45 minutes in 
SP mode)
Disc remaining time may slightly differ between 
different models.
(7) Elapsed play time/Recording mode
(8) Elapsed recording time and recording mode
Only displayed when receiving a digital broadcast:
(9) Channel
(10) Current  program
(11) Parental Rating of the program (➔ 42)
(12) Channel  caption
(13) Next  program
(14) Start and finish times of the program•
Status Messages Entering Text
 When viewing the Name screen.
_Recording Name
12345
ABC a
DE F d
GH I
NOg
JKL j
M
m
67890
bc
ef / %
hi $#&
kl @
n]_o[
Space
PQRS p
TUV t
WX Y Z wqrs ( )
uv { }-
xyz
`
|! ?\
   .
,

:
;
1234567890
ENTER
Delete
Set
 e, r, w, q to select characters, 
then 
Repeat this step to enter other characters. –
  when you’ve fi nished 
 entering text.
 Tips
Using the numbered buttons to enter characters
e.g.: entering the letter “R”
1. Press [7] to move to the 7th row.
2. Press [7] twice to highlight “R”.
3. Press [ENTER].
To enter a space
Press [  CANCEL] then press [ENTER].
To delete a character
Press [h PAUSE] on a character in the name field.
To cancel in the middle
Press [RETURN].
Characters will not be saved.
 Notes
Long recording names may not be displayed. • 
						

							29
RQT8851
Advanced Features
Advanced Editing
Recordings-Editing
 Tips
Recording/Chapter
Normally, programs are recorded as a single item consisting of one 
chapter.
Recording
Chapter
Start End
RAM You can divide a recording into multiple chapters.
Chapter Chapter Chapter ChapterRecording
After finalizing, recordings are divided into chapters of the following 
lengths.
-R -R DL -RW(V) : Chapters are approx. 5 minutes long
+R +R DL : Chapters are approx. 8 minutes long
Maximum numbers of items on a disc
RAM -R -R DL -RW(V)+R +R DL +RWRecordings 99 49
Chapters Approx. 1000 Approx. 254
Accessing the Recording View
  to select the DVD drive.
 
RAM When the Album View screen
            is displayed, press 
 to switch to the
            Recordings screen.
 e, r, w, q to select a recording.
Multiple editing (➔ right, Tips) –
  to display the menu list.
To view more options 
Press [e, r] to select “Edit Recording”, then 
press [ENTER].
Items that cannot be selected are gray.
e.g., 
RAM
Setup Protection
Cancel Protection
Change Thumbnail
Divide Recording
Edit Name
Properties
Edit Recording
View Chapters
Album View
Delete Recording
If you select “View Chapters” (➔ 31) •
Refer to 
“Editing 
Operations to 
Recordings” 
(➔ right).
•
•
 Notes
You cannot edit during recording or copying.
+R +R DL Management information is recorded in unused sections 
when you edit discs. The available space on these discs decreases 
each time you edit their contents.
 Tips
To exit the menu screen
Press [DIRECT NAVIGATOR].
To view other pages
Press [e, r, w, q] to select “Previous” or “Next”, then press 
[ENTER].
You can also press [u, i] to view other pages.
Multiple editing
Select with [e, r, w, q], then press [h PAUSE]. (Repeat.)
A checkmark appears. Press [h PAUSE] again to cancel.
Editing Operations to Recordings
Delete Recording
Perform steps 1−4 of “Accessing the Recording View”.
RAM -R -R DL -RW(V) +R +R DL +RW
Important: Once deleted, contents cannot be 
recovered.
 e, r to select “Delete Recording”, 
then 
 w to select “Delete”, then  
Recording Properties
Perform steps 1−4 of “Accessing the Recording View”.
RAM -R -R DL -RW(V) +R +R DL +RW -RW(VR)
 e, r to select “Properties”, then 
Recording information is shown (e.g., date, time).
Properties
No.
Ch. Date01
4 6/20/2002 WedStart
Rec. Time10:00 AM
2:15 (SP)
Dinosaur
ENTER
–
Recording Name
Perform steps 1−4 of “Accessing the Recording View”.
RAM -R -R DL -RW(V) +R +R DL +RW
 e, r  to select “Edit Name”, then
 
You can give a name for the recording (➔ 28). –
•
•
–
–
Using menus to play 
still pictures (➔ 19). 
						

							30
RQT8851
Recordings-Editing
Setup Protection / Cancel Protection
Perform steps 1−4 of “Accessing the Recording View” 
(➔ 29).
RAM
Use to prevent accidental erasure of recordings.
 e, r to select “Setup Protection” 
or “Cancel Protection”, then 
 w to select “Yes”, then 
The lock symbol 
appears when the 
recording is protected.DIRECT NAVIGATOR    Recordings
     DVD-RAM
10 10/27 Mon
07
8 10/27 Mon
08
Change Thumbnail
Perform steps 1−4 of “Accessing the Recording View” 
(➔ 29).
RAM -R -R DL -RW(V) +R +R DL +RWChanges the thumbnail picture shown in the 
Recordings screen.
 e, r
 to select 
“Change Thumbnail”, then 
SSUB MENUSelectNo.--09
DIRECT NAVIGATOR   Change Thumbnail
     DVD-RAM
Page      02/02 Previous
***06 1.  1.  SUN
NextENTER
07
***06 1.  1.  SUN
08
------
--EndNext
VideoPictureBA
***06Change
Change
Start play and select
the thumbnail position.
--:--.--
Exit0:00.00
08
  to start play.
  at the point you want to 
use as the thumbnail.
To change the thumbnail:
Restart play and press [e, r] to select 
“Change” then press [ENTER] at the point 
you want to use as the thumbnail. –
8 e, r to select “Exit”, then 
 Tips
For quicker editing
Use search (➔ 17), Slow-motion (➔ 18) or Time Slip (➔ 18) to find 
the desired point.
To skip to the start or end of a recording, press [u] (start) or [i] 
(end).
For better precision, use Slow-motion (➔ 18) and Frame-by-Frame (➔ 18).
•
•
•
Divide Recording
Perform steps 1−4 of “Accessing the Recording View” 
(➔ 29).
RAM
Once divided, recordings cannot be recombined.
 e, r to select “Divide Recording”, 
then 
SSUB MENUSelectNo.--09
DIRECT NAVIGATOR    Divide Recording
     DVD-RAM
Page      02/02 Previous
***06 1.  1.  SUN
NextENTER
07
***06 1.  1.  SUN
08
------
--
Next
VideoPictureBA
***06Preview
Divide
--:--.--
Exit0:00.11
Divide
Play 08
SSUB MENUSelectNo.--09
DIRECT NAVIGATOR    Divide Recording
     DVD-RAM
Page      02/02 Previous
***06 1.  1.  SUN
NextENTER
07
***06 1.  1.  SUN
08
------
--
Next
VideoPictureBA
***06Preview
Divide
--:--.--
Exit0:00.11
Divide
Play 08
  at the point you want to 
 divide.
For quicker editing (➔ left, 
Tips)
Selecting “Preview” then pressing [ENTER] 
plays the recording from 10 seconds prior, to 
10 seconds after the division point.
To change the point to divide at: 
Restart play and press [e,r] to select 
“Divide” then press [ENTER] to bring to the 
point where you want to divide. –
–
–
 e, r to select “Exit”, then 
8 w to select “Divide”, then 
The recording is divided at that point. –
 Notes
Divided recordings retain the name of the original.
A short amount of video and audio just before and after the division 
point gets cut out.
You cannot divide a recording when the resulting parts are too short 
or when the total number of recordings exceeds 99. •
•
•