Panasonic Dmr Ez27 Operating Instructions Manual

51
RQT8851
Connection and Setting
Adding a Video Cassette Recorder (VCR)
Additional coaxial cable and audio/video (AV) cable are required.
Connecting to a Television and a VCR (No Cable Box or Satellite Receiver)
 Perform step  on page 47.
 Coaxial cable (included) from the “RF OUT” 
on the VCR to the “VHF/UHF RF IN” on the 
TV.
 Audio/video cable (included) from the 
“OUT” on the unit to the 
“AV IN” on the TV.
 Coaxial cable from the “RF OUT” on the unit 
to the “RF IN” on the VCR.
  Audio/video cable...

52
RQT8851
You can enjoy high-quality picture by using the  
following terminals for connection.
Standard 
Quality 
PictureHigh- 
quality 
Picture
VIDEO IN 
terminalS VIDEO IN 
terminalHDMI IN
terminalCOMPONENT 
VIDEO IN 
terminal
Using an S Video Cable for Better Video 
(S Video Cable not included)
The S VIDEO OUT terminal achieves a more vivid 
picture than the VIDEO OUT terminal. (Actual results 
depend on the television.)
Rear of TV 
Rear of this unit
AUDIO IN 
R L VIDEOS VIDEO
IN
Red   White 
Red...

53
RQT8851
Connection and Setting
You can enjoy high-quality picture and audio by changing the audio/video (AV) cable connection between this unit 
and your TV on pages 47 to 49 as follows.
Connecting with an HDMI (High Definition Multimedia Interface) Terminal
HDMI is the next-generation interface for digital devices. When connected to an HDMI compatible unit, an 
uncompressed digital audio and video signal is transmitted, enabling you to enjoy high quality digital video and 
audio with just one cable....

54
RQT8851
Setting the Channels and Clock
Preparation:
Turn on the television and select the appropriate video 
input to suit the connections to this unit.
These are the first settings you make upon buying the 
unit. You don’t need to make these settings again. •
•
  to turn the unit on.
 Language:
e, r to select, then 
English
Español
Français
Press ENTER
Pulse ENTER
Appuyer sur ENTERSelect Language
Seleccione el idioma
Sélection de langue
  TV Aspect Ratio:
e, r to select “4:3 TV” or 
“16:9 Widescreen...

55
RQT8851
Connection and Setting
  The types of transmission: 
e, r to select “Antenna” or 
“Cable”, then 
Automatic Clock and Channel SettingsPlease select the wire connected to RF IN.
Antenna
ENTER
Cable
  to start automatic channel/ 
 clock setting.
8  Confirm the time, then 
DST (Daylight Saving Time) shows the 
summertime setting.
Time Zone shows the time difference from 
Greenwich Mean Time (GMT).
Set Clock Automatically
Clock Setting completed successfully.
4/4/2006 12:15 AM
DST...........

56
RQT8851
Other Settings
Setting Channel Captions
The captions you select or modify are used as channel 
names and displayed on the Direct Navigator screen.
With the unit stopped
 
 e, r to select “Channel”, then q.
 e, r to select “Channel Settings”, 
then 
 e, r to select channel, then w, q 
to select the “Caption” column.
Setup
Channel
Setup
Disc
Video
Audio
Display
TV Screen2Deleted34-14Added4-256879Added - - -
C003
KRON-SD
KRON-HD
C005
- - -
- - -
- - -
C009
Add/Del ChannelCaptionChannel Settings...

57
RQT8851
Connection and Setting
Clock Settings
With the unit stopped
 
 e, r to select  “Setup”, then q.
 e, r to select “Clock Settings”, 
then 
Set Clock Automatically
Perform steps 1–3 of “Clock Settings”.
 e, r to select “Set Clock 
Automatically”, then 
  to start auto setting.
The following dialog appears when setting is 
complete. 
Set Clock Automatically
Clock Setting completed successfully.
4/4/2006 12:15 AM
DST........ .......             On
Time Zone ....           EST
  to complete.
 Notes...

58
RQT8851
Using the Unit’s Remote Control to 
Operate the TV and the Set Top Box 
(Cable Box, Satellite Receiver, etc.)
Set Top Box 
operation buttonsTV operation 
buttons
2a2b
  Point the remote control at the TV 
or Set Top Box.
To set the code for the TV:
2a While pressing and holding , 
 
enter the code from the table 
on the right using the numbered 
buttons.
e.g., 0250: press [0] ➔ [2] ➔ [5] ➔ [0]
To set the code for the Set Top Box:
2b While pressing and holding , 
enter the code from the table...

59
RQT8851
Connection and Setting
 Remote Control Codes for the TV (Continued)
Manufacturer Code
Sylvania 0020 / 0028 / 0030 / 0054 / 0065 / 0096 / 0171 / 
0381
Symphonic 0171 / 0180
Syntax-Brillian 1007 / 1144 / 1240 / 1255 / 1257 / 1258 / 1331
Tatung 0003 / 0049 / 0055 / 0396 / 1756
Thomson 0209 / 0210 / 0047
Toshiba 0036 / 0060 / 0149 / 0154 / 0156 / 0650 / 0832 / 
0845 / 1156 / 1256 / 1265 / 1356 / 1656 / 1704
Ultra Products 0391
Viewsonic 0857 / 0864 / 0885 / 1755
Westinghouse 0885 / 0889 / 0890 /...

60
RQT8851
Control Reference Guide
Remote Control
1
4
5
7
6 3
9
bp
bq
bt
ck
cl
cm
8
bo
br
bs
bk
bl
bm
bncp
cq cn
co
cr
2
1Turn the unit on or off ................................................ (➔ 6)
2Select the drive (DVD or SD) .............................. (➔ 7, 19)
3Select channels and recording numbers etc./
Enter numbers .......................................................... (➔ 6)
4Cancel
5Basic operations for recording and play
6Skip the specified time...