Panasonic Dmr Es15 Operating Instructions Manual

RQT8314
31
   (play only)
1While stopped 
Press [FUNCTIONS].
2Press [e,r] to select “Other 
Functions” and press [ENTER].
3Press [e,r] to select “Playlists” and 
press [ENTER].
4Press [e,r,w,q] to select the playlist.
To start play Ô Press [ENTER].
To  e d i t  Ô Step 5
• To show other pages/Multiple editing (Ôpage 28)
5Press [SUB MENU], then press [e,r] 
to select the operation and press 
[ENTER].
• If you select “Edit”, press [e,r] to select the operation and 
press [ENTER].
6Press [e,r,w,q] to select...

RQT8314
32
Copying from a video cassette recorder
e.g.: Connecting other video equipment to the IN2 or DV IN 
terminals
You can also connect to the IN1 input terminal on the rear.
• Turn off the unit and other video equipment before connecting.
If the audio output of the other equipment is monaural
Connect to L/MONO.
* The S VIDEO terminal achieves a more vivid picture than the 
VIDEO terminal.
See also the notes “Important notes for recording” (Ôpage 16).
Preparation
• Turn on the unit and connected...

RQT8314
33
Entering text
Refer to the control reference on page 32.
         
You can give names to recorded titles, etc.
The maximum number of characters:
* Scheduled recording
If a name is long, parts of it may not be shown in some screens.
1Show Enter Name screen.
2Press [e,r,w,q] to select a character 
and press [ENTER].
Repeat this step to enter other characters.
• To erase a character
Press [e,r,w,q] to select the character in the name field 
and press [h].
• Using the numbered buttons to enter...

RQT8314
34
DVD M an ag ement
Preparation
 Release protection (Ôbelow).
1While stopped
Press [FUNCTIONS].
2Press [e,r] to select “Other 
Functions” and press [ENTER].
3Press [e,r] to select “DVD 
Management” and press [ENTER].
Select which step 4 to perform depending on what you want to 
do next.
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
         
After performing steps 1–3 (Ôabove)
4Press [e,r] to select “Disc Name” 
and press [ENTER].
Ôpage 33,...

RQT8314
35
      
You can select whether to show the top menu after finalizing. Make 
selections before finalizing the disc.
After performing steps 1–3 (Ôpage 34)
4Press [e,r] to select “Playback will 
start with:” and press [ENTER].
5Press [e,r] to select items and press 
[ENTER].
     
Finalize the disc so you can play it on other DVD equipment. The 
equipment must be able to play finalized discs. To check 
compatibility with other equipment, refer to page 4.
After performing steps 1–3 (Ôpage 34)...

RQT8314
36
Changing the unit’s settings
1While stopped
Press [SETUP].
2Press [e,r] to select the tab and 
press [q].
3Press [e,r] to select the menu and 
press [ENTER].
4Press [e,r] to select the option and 
press [ENTER].
To return to the previous screen
Press [RETURN].
To exit the screen
Press [SETUP].
Note
There may be differences in operation methods. If this happens, 
follow the on-screen instructions for the operation.
The settings remain intact even if you switch the unit to standby.
*
1You can...

RQT8314
37
Changing the unit’s settings
Ta b sMenusOptions (Underlined items are the factory presets.)
Disc Settings for Playback
Press [ENTER] to show the following settings.
Ratings
Set a ratings level to limit DVD-Video play.
Follow the on-screen instructions. Enter a 4-digit password 
with the numbered buttons when the password screen is 
shown.
• Do not forget your password.•8 No Limit
:  All DVD-Video can be played.
• 1 to 7:  Prohibits play of DVD-Video with corresponding 
ratings recorded on...

RQT8314
38
Changing the unit’s settings
Ta b sMenusOptions (Underlined items are the factory presets.)
Audio
Dynamic Range Compression   (Dolby Digital only)
Change the dynamic range for late night viewing.•On •Off
Multi-channel TV Sound ( MTS )
      
Select whether to record the main or secondary audio program 
(SAP) when recording to a disc.•Main• Secondary Audio Program (SAP)
You cannot select the audio on this unit when recording from an 
external source, such as when transferring (copying) from a...

RQT8314
39
Messages
The following messages or service numbers appear on the unit’s display when something unusual is detected during startup and use.
On the televisionPage
Cannot finish recording 
completely.• The program was copy-protected.
• The disc may be full.
• The maximum number of times you can record the program is exceeded.—
—
—
Cannot play.• You inserted an incompatible disc (Discs recorded in PAL video, etc.).—
Cannot record on the disc.• The disc may be dirty or scratched.6
Unable to...

RQT8314
40
Frequently asked questions
Set upPage
Do the Audio/Video cables need to be 
connected to the TV in order to see the 
Menus?• If your television does not have AUDIO/VIDEO terminals, an RF modulator is 
necessary. Consult your local dealer for more information.8–10
What equipment is necessary to play multi 
channel surround sound?• DVD-Video:
You can play DVD-Video multi channel surround by digitally connecting an 
amplifier equipped with a Dolby Digital or DTS decoder. 
• DVD-Audio:
This unit...