Panasonic Dmr Es10 Operating Instructions Manual
Have a look at the manual Panasonic Dmr Es10 Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 16
RQT8009
16
Recording
Recording television programs
Refer to the control reference on page 15.
■To pause recording
Press [h].
Press again to restart recording.
You can also press [* REC] to restart.
(Title is not split into separate titles.)
■To s t o p r e c o r d i n g
Press [g].
From the start to the end of the recording is called one title.
It takes about 30 seconds for the unit to complete recording
management information after recording finishes.
During recording
Press [* REC] to select the...](http://img.usermanuals.tech/thumb/58/66414/w64_dmr-es10_en_om_d-15.png "Page 16
RQT8009
16
Recording
Recording television programs
Refer to the control reference on page 15.
■To pause recording
Press [h].
Press again to restart recording.
You can also press [* REC] to restart.
(Title is not split into separate titles.)
■To s t o p r e c o r d i n g
Press [g].
From the start to the end of the recording is called one title.
It takes about 30 seconds for the unit to complete recording
management information after recording finishes.
During recording
Press [* REC] to select the...")
![Page 17
RQT8009
17
Recording
Refer to the control reference on page 15.
The unit sets the best possible picture quality that fits the recording
within the remaining disc space. This is convenient when you want
the recorded program to fit one disc perfectly or you are concerned
about the amount of free space on the disc. The recording mode
becomes FR mode.
Preparation
Select the channel to be recorded or the external input.
While stopped
Press [F Rec].
Press [w, q] to select “Hour” and
“Min.” and press [e,...](http://img.usermanuals.tech/thumb/58/66414/w64_dmr-es10_en_om_d-16.png "Page 17
RQT8009
17
Recording
Refer to the control reference on page 15.
The unit sets the best possible picture quality that fits the recording
within the remaining disc space. This is convenient when you want
the recorded program to fit one disc perfectly or you are concerned
about the amount of free space on the disc. The recording mode
becomes FR mode.
Preparation
Select the channel to be recorded or the external input.
While stopped
Press [F Rec].
Press [w, q] to select “Hour” and
“Min.” and press [e,...")
![Page 19
RQT8009
19
Recording
You can enter up to 16 programs up to a month in advance. (Each
daily or weekly program is counted as one program.)
•When connecting a cable TV box or satellite receiver, select the
channel on the cable TV box or satellite receiver before the
scheduled recording starts.
1Press [SCHEDULE].
2Press [e, r] to select “New
Scheduled Recording” and press
[ENTER].
3Press [q] to move through the items
and change the items with [e, r].
•Press and hold [e, r] to alter On (Start time)...](http://img.usermanuals.tech/thumb/58/66414/w64_dmr-es10_en_om_d-18.png "Page 19
RQT8009
19
Recording
You can enter up to 16 programs up to a month in advance. (Each
daily or weekly program is counted as one program.)
•When connecting a cable TV box or satellite receiver, select the
channel on the cable TV box or satellite receiver before the
scheduled recording starts.
1Press [SCHEDULE].
2Press [e, r] to select “New
Scheduled Recording” and press
[ENTER].
3Press [q] to move through the items
and change the items with [e, r].
•Press and hold [e, r] to alter On (Start time)...")
![Page 21
RQT8009
21
Playing back
Operations during play
Stop
Press [g].
The stopped position is memorized.
When stopped position memorized, “PLAY” flashes in the unit’s display.
(Excluding when playing from the Direct Navigator and when playing a playlist.)
Resume play function
Press [q] (PLAY) to restart from this position.
Stopped position
•If [g] is pressed several times, “PLAY” disappears and the position is cleared.
•The position is cleared if the unit is turned off or the tray is opened.
PausePress [h]....](http://img.usermanuals.tech/thumb/58/66414/w64_dmr-es10_en_om_d-20.png "Page 21
RQT8009
21
Playing back
Operations during play
Stop
Press [g].
The stopped position is memorized.
When stopped position memorized, “PLAY” flashes in the unit’s display.
(Excluding when playing from the Direct Navigator and when playing a playlist.)
Resume play function
Press [q] (PLAY) to restart from this position.
Stopped position
•If [g] is pressed several times, “PLAY” disappears and the position is cleared.
•The position is cleared if the unit is turned off or the tray is opened.
PausePress [h]....")
![Page 22
RQT8009
22
Playing back
Using menus to play MP3 and still pictures (JPEG/TIFF)
This unit plays MP3 files recorded
on CD-R/RW designed for audio
recording that are finalized (➔ page
36) on a computer.
The screen shown at right is
displayed when you insert a disc
containing MP3 files and still
pictures (JPEG/TIFF).
Press [ENTER], and follow the steps below.
1Press [TOP MENU].
•Files are treated as tracks and folders are treated as groups.
2Press [e, r] to select the track and
press [ENTER].
Play...](http://img.usermanuals.tech/thumb/58/66414/w64_dmr-es10_en_om_d-21.png "Page 22
RQT8009
22
Playing back
Using menus to play MP3 and still pictures (JPEG/TIFF)
This unit plays MP3 files recorded
on CD-R/RW designed for audio
recording that are finalized (➔ page
36) on a computer.
The screen shown at right is
displayed when you insert a disc
containing MP3 files and still
pictures (JPEG/TIFF).
Press [ENTER], and follow the steps below.
1Press [TOP MENU].
•Files are treated as tracks and folders are treated as groups.
2Press [e, r] to select the track and
press [ENTER].
Play...")
![Page 23
RQT8009
23
Playing back
2Press [e, r, w, q] to select the still
picture and press [ENTER].
•The selected still picture is displayed on the screen.
You can also select still pictures with the number buttons.
e.g., 5: [0] ➔ [0] ➔ [5]
15: [0] ➔ [1] ➔ [5]
■To select another folder
While the JPEG Menu is displayed
1 Press [e, r, w, q] to select “Folder” and
press [ENTER].
2 Press [e, r] to select the folder and press
[ENTER].
To display the previous or next still picture during play
Press [w, q].
To show...](http://img.usermanuals.tech/thumb/58/66414/w64_dmr-es10_en_om_d-22.png "Page 23
RQT8009
23
Playing back
2Press [e, r, w, q] to select the still
picture and press [ENTER].
•The selected still picture is displayed on the screen.
You can also select still pictures with the number buttons.
e.g., 5: [0] ➔ [0] ➔ [5]
15: [0] ➔ [1] ➔ [5]
■To select another folder
While the JPEG Menu is displayed
1 Press [e, r, w, q] to select “Folder” and
press [ENTER].
2 Press [e, r] to select the folder and press
[ENTER].
To display the previous or next still picture during play
Press [w, q].
To show...")
![Page 24
RQT8009
24
Playing back
Using on-screen menus
1While playing,
Press [DISPLAY].
•Depending on the condition of the unit (playing, stopped,
etc.) and disc contents, there are some items that you
cannot select or change.
2Press [e, r] to select the menu and
press [q].
3Press [e, r] to select the item and
press [q].
4Press [e, r] to select the setting.
•Some items can be changed by pressing [ENTER].
To clear the on-screen menus
Press [DISPLAY].You may have to use the menus (➔ page 20) on the disc to...](http://img.usermanuals.tech/thumb/58/66414/w64_dmr-es10_en_om_d-23.png "Page 24
RQT8009
24
Playing back
Using on-screen menus
1While playing,
Press [DISPLAY].
•Depending on the condition of the unit (playing, stopped,
etc.) and disc contents, there are some items that you
cannot select or change.
2Press [e, r] to select the menu and
press [q].
3Press [e, r] to select the item and
press [q].
4Press [e, r] to select the setting.
•Some items can be changed by pressing [ENTER].
To clear the on-screen menus
Press [DISPLAY].You may have to use the menus (➔ page 20) on the disc to...")
![Page 25
RQT8009
25
Playing back
Only when you have selected “480p” in “TV Type” (➔ page 14).
Position
1 (Standard) - 5: The higher the setting the lower the screen moves.
FUNCTIONS window and
Status messages
By using the FUNCTIONS window you may access the main
functions quickly and easily.
1While stopped
Press [FUNCTIONS].
Functions displayed depend on the type of disc.
2Press [e, r] to select an item and
press [ENTER].
•If you select “Other Functions”, press [e, r] to select an
item and press [ENTER].
To...](http://img.usermanuals.tech/thumb/58/66414/w64_dmr-es10_en_om_d-24.png "Page 25
RQT8009
25
Playing back
Only when you have selected “480p” in “TV Type” (➔ page 14).
Position
1 (Standard) - 5: The higher the setting the lower the screen moves.
FUNCTIONS window and
Status messages
By using the FUNCTIONS window you may access the main
functions quickly and easily.
1While stopped
Press [FUNCTIONS].
Functions displayed depend on the type of disc.
2Press [e, r] to select an item and
press [ENTER].
•If you select “Other Functions”, press [e, r] to select an
item and press [ENTER].
To...")
RQT8009 21 Playing back Operations during play Stop Press [g]. The stopped position is memorized. When stopped position memorized, “PLAY” flashes in the unit’s display. (Excluding when playing from the Direct Navigator and when playing a playlist.) Resume play function Press [q] (PLAY) to restart from this position. Stopped position •If [g] is pressed several times, “PLAY” disappears and the position is cleared. •The position is cleared if the unit is turned off or the tray is opened. PausePress [h]. Press again or press [q] (PLAY) to restart play. Search Press [t] or [y]. • The speed increases up to 5 steps. •Press [q] (PLAY) to restart play.•Audio is heard during first level search forward. Audio is heard during all levels of search. (excluding moving picture parts) •Depending on the disc, searching may not be possible. SkipWhile playing or paused, press [u] or [i]. • Each press increases the number of skips. Starting from a selected item Press the numbered buttons. e.g., 5: [0] ➔[5] (MP3, JPEG and TIFF discs only)5: [0] ➔ [0] ➔ [5] 15: [1] ➔[5] 15: [0] ➔ [1] ➔ [5] Selecting groups While stopped (screen saver is displayed on the television ➔ right) 5: [5] •This works only when stopped (screen saver is displayed on the television ➔ right) with some discs. Quick ViewPress and hold [q] (PLAY/x1.3). The play speed can be increased without distorting the audio. •Press again to return to normal speed. Slow-motion (Motion picture parts only) While paused, press [t] or [y]. • The speed increases up to 5 steps. •Press [q] (PLAY) to restart play. •Forward direction only. •The unit will pause if slow-motion play is continued for approximately 5 minutes (excluding ). Frame-by-frame (Motion picture parts only) While paused, press [w h] or [h q]. • Each press shows the next frame. •Press and hold to change forward or backward in succession.•Press [q] (PLAY) to restart play. •Forward direction only. Displaying the television image as a picture-in- picture Skipping the specified time (Time Slip) 1 Press [TIME SLIP]. 2 Press [e, r] to select the time and press [ENTER]. Play skips to the specified time. •Press [TIME SLIP] to show the play images in full. CM SkipPress [CM SKIP]. Play restarts from approximately a minute later. Editing operations during play CH PLAY DVD-ACD CD DVD-A RAM RAM-RDVD-V-RW(V)+R DVD-A -RW(VR)VCD VCD DVD-VVCDDVD-A RAM-RDVD-V-RW(V)+R DVD-A -RW(VR)VCDVCD Press [TIME SLIP]. The unit displays the television image as a picture-in-picture. •You will hear the playback audio.•Press [TIME SLIP] again to cancel. •The blue background does not appear on the receiving screen even if you select “On” for “Blue Background” in the SETUP menu (➔ page 33).•You can change the channel being received by pressing [1 2 CH]. •You cannot change the channel being received while recording. Play images Currently receiving images RAM-R-RW(VR)-RW(V)+R RAM-R-RW(VR)-RW(V)+R Erase 1 Press [ERASE]. 2 Press [w, q] to select “Erase” and press [ENTER]. • A title cannot be restored once it is erased. Make certain before proceeding. •You cannot erase while recording. •The available recording space on DVD-R or +R does not increase when you erase titles. •Available recording space on a DVD-RW (DVD-Video format) increases only when the last recorded title is erased. It does not increase if other titles are erased. Create chapter (➔ page 26, Title/Chapter) Press [CREATE CHAPTER]. Chapters are divided at the point pressed.•You cannot create chapters when the unit is in scheduled recording standby. RAM-R-RW(V)+R RAM
RQT8009
22
Playing back
Using menus to play MP3 and still pictures (JPEG/TIFF)
This unit plays MP3 files recorded
on CD-R/RW designed for audio
recording that are finalized (➔ page
36) on a computer.
The screen shown at right is
displayed when you insert a disc
containing MP3 files and still
pictures (JPEG/TIFF).
Press [ENTER], and follow the steps below.
1Press [TOP MENU].
•Files are treated as tracks and folders are treated as groups.
2Press [e, r] to select the track and
press [ENTER].
Play starts on the selected track.
•“ ” indicates the track currently playing.
•You can also select the track with the numbered buttons.
e.g., 5: [0] ➔ [0] ➔ [5]
15: [0] ➔ [1] ➔ [5]
■Using the tree screen to find a group
While the file list is displayed
1Press [q] while a track is highlighted to
display the tree screen.
2Press [e, r] to select a group and press
[ENTER].
The file list for the group appears.
To show other pages
Press [u, i].
To exit the screen
Press [TOP MENU].
You can play CD-R/CD-RW discs
which contain still pictures (JPEG/
TIFF) that have been recorded and
finalized (➔ page 36) on a
computer.
The screen shown at right is
displayed when you insert a disc
containing MP3 files and still pictures (JPEG/TIFF).
Select JPEG menu before performing the following steps below.
(➔ page 23, To select JPEG Menu)
1Press [TOP MENU].
SKIP SLOW/SEARCH
TIME SLIP
FUNCTIONS DIRECT NAVIGATOR
TOP MENU
RETURN
STATUS DISPLAY
SUB MENU
SCHEDULE
CM SKIP
AUDIO
CANCELVCR Plus+
Numbered
buttons
RETURN e, r, w, q
ENTER TOP MENU
STATUS SUB MENU SKIP u, i
FUNCTIONS
Regarding MP3 and still pictures (JPEG/TIFF)
•Compatible formats: ISO9660 level 1 or 2 (except for extended
formats) and Joliet
•Maximum number of files (tracks) and folders (groups)
recognizable: 999 files (tracks) and 99 folders (groups)
•This unit is compatible with multi-session but reading or play of
the disc may take time if there are a lot of sessions.
•Operation may take time to complete when there are many files
(tracks) and/or folders (groups) and some may not display or be
playable.
•The display order on this unit may differ from how the order is
displayed on a computer.
•Depending on how you create the disc (writing software), files
(tracks) and folders (groups) may not play in the order you
numbered them.
•This unit is not compatible with packet-write format.
•Depending on the recording, some items may not be playable.
Regarding MP3
•File format: MP3
Files must have the extension “.mp3” or “.MP3”.
•Bit rates: 32 kbps to 320 kbps
•Sampling frequency: 16kHz/22.05kHz/24kHz/32kHz/44.1kHz/
48kHz
•This unit is not compatible with ID3 tags.
Regarding still pictures (JPEG/TIFF)
•File format: JPEG, TIFF (non-compressed RGB chunky format)
Files must have the extension “.jpg”, “.JPG”, “.tif ” and “.TIF”.
•Number of pixels: 34 x 34 to 6144 x 4096
(Sub sampling is 4:2:2 or 4:2:0)
•Operation may take time to complete when playing TIFF format
still pictures.
•MOTION JPEG is not supported.
•You can play MP3 and still pictures (JPEG/TIFF) on this unit by
making folders as shown below. However, depending on how
you create the disc (writing software), play may not be in the
order you numbered the folders.
•When the highest level folders are “DCIM” folders, they are
displayed first on the tree.
002 Group
001001 Group
001
track.mp3
002 track.mp3
003 track.mp3
001 track.mp3
002 track.mp3
003 track.mp3
003 Group001 track.mp3
002 track.mp3
003 track.mp3004 track.mp3
003 Folder
001002 Folder
P0000003.jpg
P0000004.jpgP0000001.jpg tree tree
P0000002.jpg
P0000005.jpg
P0000010.jpg
P0000011.jpg
P0000012.jpg
004 FolderP0000006.jpg
P0000007.jpg
P0000008.jpg
P0000009.jpg
Order of
playOrder of
play Structure of MP3 folders
Prefix with 3-digit numbers in
the order you want to play
them.Structure of still pictures
(JPEG/TIFF)
Files inside a folder are
displayed in the order they
were updated or taken.
Playing MP3
Playing still pictures (JPEG/TIFF)
CD
Playback mode is set to MP3.
If you want to play picture (JPEG),
select JPEG Menu from Menu in FUNCTIONS.
ENTER
001 Both Ends Freezing
002 Lady Starfish
003 Life on Jupiter
004 Metal Glue
005 Paint It Yellow
006 Pyjamamama
007 Shrimps from Mars
008 Starperson
009 Velvet Cuppermine
010 Ziggy Starfish
Page 001/0021
1 : My favorite
2
3
4
5
6
7
8
9
10 Total TrackTreeG 1
T 1
Total 1/111
MenuGroup No.
ENTER
Prev.
Next
No.--09
Selected group
G: Group no.
T: Track no. in the group
TOTAL: Track no./Total track
no. in all groups
TreeG 7/25 001 My favorite
001 Brazilian pops
002 Chinese pops
003 Czech pops
004 Hungarian pops
005 Liner notes
006 Japanese pops
007 Mexican pops 008 Philippine pops
009 Swedish pops
001 Momoko
002 Standard number
001 Piano solo
002 Vocal
MenuG 8
T 14
Total 40/111
MP3 music
ENTER
No.--09
G: Selected group no. /Total group no.
If the group has no track, “– –” is
displayed as group number.
You cannot select
groups that contain
no compatible files.
Playback mode is set to MP3.
If you want to play picture (JPEG),
select JPEG Menu from Menu in FUNCTIONS.
ENTER
CD
CD(JPEG) JPEG Menu Picture(JPEG) View08 8 10/27 Mon
Pre
Folder
viousPage 01/01NextPlay
--- --- ---
001
008 003 004
009002
005006007
RQT8009 23 Playing back 2Press [e, r, w, q] to select the still picture and press [ENTER]. •The selected still picture is displayed on the screen. You can also select still pictures with the number buttons. e.g., 5: [0] ➔ [0] ➔ [5] 15: [0] ➔ [1] ➔ [5] ■To select another folder While the JPEG Menu is displayed 1 Press [e, r, w, q] to select “Folder” and press [ENTER]. 2 Press [e, r] to select the folder and press [ENTER]. To display the previous or next still picture during play Press [w, q]. To show other pages Press [u, i]. To exit the menu screen Press [TOP MENU]. 1Press [ENTER]. 2Press [FUNCTIONS]. 3Press [e, r] to select “MENU” and press [ENTER]. 4Press [e, r] to select “JPEG Menu” and press [ENTER]. After Step1 (➔page 22, Playing still pictures (JPEG/TIFF)) 2Press [e, r, w, q] to select “Folder” and press [ SUB MENU]. 3Press [e, r] to select “Start Slide Show” and press [ENTER]. To change the slide interval In step 2 above, press [e, r] to select “Slide Interval” and press [ENTER]. Press [w, q] to select the slide interval and press [ENTER]. •You can select a slide interval between 0-30 seconds. 1While playing, Press [SUB MENU]. 2Press [e, r] to select the item and press [ENTER]. To return the picture to its original size Press [SUB MENU]. Press [e, r] to select “Zoom out” and press [ENTER]. To return the rotated picture to its original position Press [SUB MENU]. Press [e, r] to select the opposite rotation button and press [ENTER]. Note •The rotation and enlargement information will not be stored. •When zooming in, the picture may be cut off. Press [STATUS] twice. To exit the picture properties screen Press [STATUS]. To select JPEG Menu CD(JPEG) JPEG Menu Select Folder ENTER F 1/21image001 image002 image003 image004 image005 image006 image007 image008 image009 image010 D ATA 1 D ATA 2 12 02 2004 You cannot select folders that contain no compatible files. F: Selected folder no./Total folder no. FUNCTIONS VOL_200411291118 Playback Mode: MP3 OffDVD Playback Schedule SCHEDULE VCR Pl s MENU CD(MP3/JPEG) Select a playback mode from the following menus. ENTER Menus MP3 Menu JPEG Menu To display still pictures one by one To rotate and zoom in / zoom out To view the picture properties Slide Interval Start Slide Show 1 Slide Interval Display IntervalSet Slide Show Interval. Press ENTER to confirm. ENTER 30sec. 2 Rotate Left Zoom in Rotate RightENTERThe “Zoom in / Zoom out” function is only available for still pictures smaller than 640 x 480 pixels. 1 2 1 2 11/30 12:03 AM 11/26/2004 Date 2/ 30No. Shooting date
RQT8009 24 Playing back Using on-screen menus 1While playing, Press [DISPLAY]. •Depending on the condition of the unit (playing, stopped, etc.) and disc contents, there are some items that you cannot select or change. 2Press [e, r] to select the menu and press [q]. 3Press [e, r] to select the item and press [q]. 4Press [e, r] to select the setting. •Some items can be changed by pressing [ENTER]. To clear the on-screen menus Press [DISPLAY].You may have to use the menus (➔ page 20) on the disc to make changes. •The display changes according to the disc content. You cannot change anything when there is no recording. Audio attribute LPCM/PPCM/%Digital/DTS/MPEG: Signal type k (kHz): Sampling frequency b (bit): Number of bits ch (channel): Number of channels Language This function works only when the elapsed play time is displayed. Select the item for repeat play. Depending on the disc, the items that can be selected will differ. Common procedures TV ADD/DLT OPEN/CLOSE SKIP SLOW/SEARCH REC MODE ERASEREC POWER F Rec TIME SLIP FUNCTIONS DIRECT NAVIGATOR TOP MENU RETURN VOLUMECHINPUT SELECT STATUS DISPLAY SUB MENU DVD POWER TV/VIDEO SETUP CREATE CHAPTER SCHEDULE CM SKIP AUDIO CANCELVCR Plus+ e, r, w, q ENTER DISPLAYSTATUS FUNCTIONS Disc VideoPlaySoundtrack Subtitle1 Audio channel Off L R Digital 2/0 chAudioOther Menu Item Setting Disc menu–Setting disc content Soundtrack The disc’s audio attributes appear. Select the audio and language (➔ below, Audio attribute, Language). Subtitle (Only discs that contain subtitle on/off information) Turn the subtitle on/off and select the language (➔ below, Language). •Subtitle on/off information cannot be recorded using this unit. •If the subtitles overlap closed captions recorded on discs, turn the subtitles off. Audio channel ➔ page 20, Changing audio during play Angle Change the number to select an angle. Still-P (Still picture) Selects the play method for still pictures. Slide Show: Plays according to the default order on the disc. Page: Select the still picture number and play. •RANDOM: Plays in random order. •Return: Returns to the default still picture on the disc. PBC (Playback control ➔ page 36) Indicates whether menu play (playback control) is on or off. (unchangeable) ENG: English SVE: Swedish CHI: Chinese FRA: French NOR: Norwegian KOR: Korean DEU: German DAN: Danish MAL: Malay ITA: Italian POR: Portuguese VIE: Vietnamese ESP: Spanish RUS: Russian THA: Thai NLD: Dutch JPN: Japanese :Others Play menu–Change play sequence Repeat play •All (excluding MP3 discs) •Chapter •Group (MP3 discs only) •Playlists •Title •Tr a c k Select “OFF” to cancel. RAM-R-RW(VR)-RW(V)+R DVD-ADVD-V RAM-R-RW(VR)-RW(V)+R DVD-ADVD-V RAM-R-RW(VR)-RW(V)+R RAM-RW(VR)VCD DVD-ADVD-V DVD-A VCD CDVCD RAM-RDVD-V-RW(V)+R-RW(VR) DVD-ACD RAM RAM-RDVD-V-RW(V)+R-RW(VR) DVD-AVCDCD
RQT8009 25 Playing back Only when you have selected “480p” in “TV Type” (➔ page 14). Position 1 (Standard) - 5: The higher the setting the lower the screen moves. FUNCTIONS window and Status messages By using the FUNCTIONS window you may access the main functions quickly and easily. 1While stopped Press [FUNCTIONS]. Functions displayed depend on the type of disc. 2Press [e, r] to select an item and press [ENTER]. •If you select “Other Functions”, press [e, r] to select an item and press [ENTER]. To exit the FUNCTIONS window Press [FUNCTIONS]. Status messages appear on the television during operation to show the condition of the unit. Press [STATUS]. The display changes each time you press the button. Video menu–Change picture quality Picture To select the picture mode during play •Normal: Default setting •Soft: Soft picture with fewer video artifacts •Fine: Details are sharper •Cinema: Mellows movies, enhances detail in dark scenes. MPEG-DNR Reduces noise and picture degradation. On←→Off Progressive (➔ page 36) Select “On” to enable progressive output. •Select “Off ” if the picture is stretched horizontally. •When progressive output is on, closed captions cannot be displayed. Transfer (When “Progressive” is set to “On”.) Select the method of conversion for progressive output to suit the type of material being played (➔ page 36, Film and video). •Auto1 (normal): Detects 24 frame-per-second film content and appropriately converts it. •Auto2:Compatible with 30 frame-per-second film content in addition to 24 frame-per-second film content. •Video: Select when using Auto1 and Auto2, and the video content is distorted. Line-in NR (Only when IN1, IN2 or IN3 is selected.) Reduces video tape noise while dubbing. Depending on the software, jittering may occur. •Automatic: Noise reduction only works on picture input from a video tape. •On:Noise reduction works for any video input. •Off: Noise reduction is off. Select when you want to record input as is. Audio menu–Change sound effect V.S.S. (Dolby Digital, 2-channel or over only) Enjoy a surround-like effect if you are using two front speakers only. •Turn V.S.S. off if it causes distortion. •V.S.S. does not work for SAP recordings. Dialog Enhancer (Dolby Digital, 3-channel or over only, including a center channel) The volume of the center channel is raised to make dialog easier to hear. Other menu–Change the display position RAM-R-RW(VR)-RW(V)+RDVD-VDVD-A RAM-R-RW(VR)-RW(V)+RDVD-VDVD-A RAM-R-RW(VR)-RW(V)+RDVD-VDVD-A RAM-RW(VR)-RW(V)+RDVD-VDVD-A FUNCTIONS window Status messages FUNCTIONS DOCUMENTARY Cartridge Protection Off Disc Protection Off OffDVD DVD-RAM Playback Schedule SCHEDULE ENTER VCR Plus+ DIRECT NAVIGATOR Other Functions 1:45 SP 12/24 6:34 PM T12 0:01.23 SP g ggT12 0:12.34 SP Rec. Stereo DVD-RAM Play Remain Type of disc Recording or play status/input channel Audio type Date and time Available recording time and recording mode Title number and elapsed time during recording/ Recording mode Title number and elapsed time during play/ Recording mode No display
RQT8009 26 Editing Editing titles/chapters •The maximum number of items on a disc: –Titles: 99 ( 49 titles) –Chapters: Approximately 1000 ( Approximately 254) (Depends on the state of recording.) Note •Once erased, divided or shortened, a title cannot be restored to its original state. Make certain before proceeding. •You cannot edit during recording or chasing play. Preparation •Turn on the television and select the appropriate video input to suit the connections to this unit. •Turn the unit on. •Insert the disc with the title to edit.Preparation Release protection (➔ page 30). 1During play or while stopped Press [DIRECT NAVIGATOR]. 2Press [e, r, w, q] to select the title. 3Press [SUB MENU], then [e, r] to select the operation and press [ ENTER]. •If you select “Edit Title”, press [e, r] to select the operation and press [ENTER] (➔ page 27). 4Press [e, r, w, q] to select the chapter. To start play ➔ Press [ENTER]. To e d i t ➔ Step 5. •To show other pages/Multiple editing (➔ above) 5Press [SUB MENU], then [e, r] to select the operation and press [ ENTER]. To exit the screen Press [DIRECT NAVIGATOR]. To return to the previous screen Press [RETURN]. Title/Chapter Programs are recorded as a single title consisting of one chapter. •Titles are divided into about 5-minute chapters after finalizing (➔ page 31). TV ADD/DLT OPEN/CLOSE SKIP SLOW/SEARCH REC MODE ERASEREC POWER F Rec TIME SLIP FUNCTIONS DIRECT NAVIGATOR TOP MENU RETURN VOLUMECHINPUT SELECT STATUS DISPLAY SUB MENU DVD POWER TV/VIDEO SETUP CREATE CHAPTER SCHEDULE CM SKIP AUDIO CANCELVCR Plus+ RETURN e, r, w, q ENTER DIRECT NAVIGATOR SUB MENUh q u, i RAM-R-RW(V)+R Title Chapter Start End You can divide a title into multiple chapters. (➔ page 21, 27, Create Chapter) RAM Title Chapter Chapter ChapterChapter You can change the order of chapters and create a playlist (➔ page 28). RAM -R-RW(V)+R +R +R Editing titles/chapters and playing chapters To show other pages Press [e, r, w, q] to select “Previous” or “Next” and press [ENTER]. •You can also press [u, i] to show other pages. Multiple editing Select with [e, r, w, q] and press [h]. (Repeat.) A check mark appears. Press [h] again to cancel. RAM DVD-RAM DIRECT NAVIGATOR Title View PreviousPage 02/02Next 10 10/27 Mon 0708 8 10/27 Mon - - - - - -- - SUB MENUSSelectPlayPreviousNext Setup Protection Cancel Protection Shorten Title Change Thumbnail Divide TitleTitle Name Properties Edit Title View ChaptersErase Title Refer to “Title operations”. If you select “View Chapters” DVD-RAM DIRECT NAVIGATOR Chapter View PreviousPage 01/01Next 08 8 10/27 Mon001--- --- --- --- --- --- --- --- --- --- --- SUB MENUSSelectPlay 0:00.00 Create Chapter Combine Chapters View Titles Erase Chapter Refer to “Chapter operations”. •You can go back to the Title View.
RQT8009 27 Editing Multiple editing is possible. Multiple editing is possible. Title operations Erase Title Press [w, q] to select “Erase” and press [ENTER]. • Once erased, the recorded contents are lost and cannot be restored. Make certain before proceeding. •The available recording space on DVD-R or +R does not increase when you erase titles. •Available recording space on a DVD-RW (DVD-Video format) increases only when the last recorded title is erased. It does not increase if other titles are erased. PropertiesInformation (e.g., time and date) is shown. •Press [ENTER] to exit the screen. Title NameYou can give names to recorded titles. ➔ page 31, Entering text Setup Protection Cancel Protection If set, this will protect the title from accidental erasure. Press [w, q] to select “Yes” and press [ENTER]. The lock symbol appears when the title is protected. Shorten Title (➔ below, “For quicker editing”)You can remove unnecessary parts of the recording such as commercials. Press [ENTER] at the start point and end point of the section you want to erase. Press [e, r] to select “Exit” and press [ENTER]. • Select “Next” and press [ENTER] to erase other sections. Press [w, q] to select “Erase” and press [ENTER]. Change Thumbnail (➔ below, “For quicker editing”)You can change the image to be shown as a thumbnail picture in the Title View. Press [q] (PLAY) to start play. Press [ENTER] when the image you want to use as a thumbnail is shown. To change the thumbnail Restart play and press [e, r] to select “Change”, then press [ENTER] at the point you want to use as the thumbnail. Press [e, r] to select “Exit” and press [ENTER]. Divide Title (➔ below, “For quicker editing”)You can divide a title into two. Press [ENTER] at the point you want to divide the title. Press [e, r] to select “Exit” and press [ENTER]. Press [w, q] to select “Divide” and press [ENTER]. To confirm the division point Press [e, r] to select “Preview” and press [ENTER]. (The unit plays 10 seconds before and after the division point.) To change the division point Restart play and press [e, r] to select “Divide”, then press [ENTER] at the point you want to change. Note •The divided titles retain the name and CPRM property (➔ page 36) of the original title. •Video and audio just before and after the dividing point may momentarily cut out. RAM-R-RW(V)+R RAM-R-RW(V)+R -RW(VR) Properties No. Ch. Date01 4 6/20/2002 WedStart Rec. time10:00 AM 2:15 (SP)Dinosaur ENTER RAM-R-RW(V)+R RAM DVD-RAM DIRECT NAVIGATOR Title V 10 10/27 Mon 0708 8 10/27 M o -- -- RAM DVD-RAM DIRECT NAVIGATOR Partial EraseStart NextExit0:43.21 Play08End - -:- -.- - - -:- -.- -Start EndENTER 1 2 3 RAM-R-RW(V)+R DVD-RAM DIRECT NAVIGATOR Change Thumbnail Change Exit0:00.01 00:00.01ChangeStart play and select the thumbnail position. 08 ENTER 1 2 3 RAM DVD-RAM DIRECT NAVIGATOR Divide Title 0:00.11 --:--.-- Divide 08 DivideExit PlayPreview ENTER 1 2 3 Chapter operations Erase Chapter Press [w, q] to select “Erase” and press [ENTER]. • Once erased, the recorded contents are lost and cannot be restored. Make certain before proceeding. Create Chapter (➔ below, “For quicker editing”) Press [ENTER] at the point you want to divide. • Repeat this step to divide at other points. Press [e, r] to select “Exit” and press [ENTER]. Combine ChaptersPress [w, q] to select “Combine” and press [ENTER]. • The selected chapter and following chapter are combined. RAM RAM DVD-RAM DIRECT NAVIGATOR Create Chapter Create Exit0:43.21 PLAY08 ENTER 1 2 RAM For quicker editing •Use search, Time Slip or slow-motion (➔ page 21) to find the desired point. •Press [u, i] to skip to the end of a title.
RQT8009 28 Editing Creating, editing and playing playlists •The maximum number of items on a disc: –Playlists: 99 –Chapters in playlists: Approximately 1000 (Depends on the state of recording.) •If you exceed the maximum numbers of items for a disc, all the items entered will not be recorded. Preparation •Turn the unit on. •Turn on the television and select the appropriate video input to suit the connections to this unit. •Insert the disc with the title to edit. •Release protection (➔ page 30). •You cannot create or edit a playlist while recording. 1While stopped Press [FUNCTIONS]. 2Press [e, r] to select “Other Functions” and press [ENTER]. 3Press [e, r] to select “PLAYLISTS” and press [ENTER]. 4Press [e, r, w, q] to select “Create” and press [ENTER]. 5Press [w, q] to select the source title and press [r]. •Press [ENTER] to select all the chapters in the title, then skip to step 7. 6Press [w, q] to select the chapter you want to add to a playlist and press [ENTER]. Press [e] to cancel. •You can also create a new chapter from the source title. Press [SUB MENU] to select “Create Chapter” and press [ENTER] (➔ page 27, Create Chapter). 7Press [w, q] to select the position to insert the chapter and press [ENTER]. •Press [e] to select other source titles. •Repeat steps 6–7 to add other chapters. 8Press [RETURN]. To exit the screen Press [RETURN] several times. To return to the previous screen Press [RETURN]. Creating playlists ADD/DLT OPEN/CLOSE SKIP SLOW/SEARCH REC MODE ERASEREC F Rec TIME SLIP FUNCTIONS DIRECT NAVIGATOR TOP MENU RETURN STATUS DISPLAY SUB MENU SETUPCREATE CHAPTER SCHEDULE CM SKIP AUDIO CANCELVCR Plus+ RETURN e, r, w, q ENTER SUB MENUFUNCTIONS You can arrange the chapters (➔ page 26) to create a playlist. •Editing playlists doesn’t modify the recorded data. •Playlists are not recorded separately so this doesn’t use much capacity. Title Chapter ChapterChapter Chapter ChapterTitle Chapter Chapter Playlist RAM RAM FUNCTIONS DOCUMENTARY Cartridge Protection Off Disc Protection Off OffDVD DVD-RAM Playback ENTER DIRECT NAVIGATOR Other FunctionsReturn FLEXIBLE RECORDINGPLAYLISTS ScheduleSCHEDULEVCR Plus+SETUPDISC MANAGEMENT DVD-RAM PLAYLISTS Playlist View PreviousPage 01/01Next - - - - - -- - - - - - Create Play DVD-RAM PLAYLISTS Create08 8 10/27 Mon 01 001--- --- --- Source Title Source Chapter Chapters in PLAYLISTPage 01/01 Page 001/001 Page 001/00102 002003 DVD-RAM PLAYLISTS Create08 8 10/27 Mon 01 001--- --- --- --- --- --- --- Source Title Source Chapter Chapters in PLAYLISTPage 01/01 Page 001/001 Page 001/00102 002003 DVD-RAM PLAYLISTS Create08 8 10/27 Mon 01 001--- --- --- --- --- --- --- Source Title Source Chapter Chapters in PLAYLISTPage 01/01 Page 001/001 Page 001/00102 002003 Press RETURN to exit.
RQT8009 29 Editing (play only) 1While stopped Press [FUNCTIONS]. 2Press [e, r] to select “Other Functions” and press [ENTER]. 3Press [e, r] to select “PLAYLISTS” and press [ENTER]. 4Press [e, r, w, q] to select the playlist. To start play ➔ Press [ENTER]. To edit ➔ Step 5. •To show other pages/Multiple editing (➔ page 26) 5Press [SUB MENU], then [e, r] to select the operation and press [ENTER]. •If you select “Edit”, press [e, r] to select the operation and press [ENTER]. 6Press [e, r, w, q] to select the chapter. To start play ➔ Press [ENTER]. To edit ➔ Step 7. •To show other pages/Multiple editing (➔ page 26) 7Press [SUB MENU], then [e, r] to select the operation and press [ENTER]. To exit the screen Press [RETURN] several times. To return to the previous screen Press [RETURN]. Multiple editing is possible. •Editing chapters in a playlist does not modify the source titles and source chapters. Multiple editing is possible. Editing and playing playlists/chapters RAM-RW(VR) DVD-RAM PLAYLISTS Playlist View01 - - - - - -- - - - Create10/27 Mon 0:30 Copy Playlist Name Change Thumbnail Create Properties Edit View Chapters Erase Playlist Refer to “Playlist operations”. If you select “View Chapters” DVD-RAM PLAYLISTS Chapter View08 10/27 Mon 0:30--- --- --- --- --- --- --- --- --- ---0:00.00001002 Move Chapter Create Chapter Combine Chapters Erase Chapter View PlaylistsAdd Chapter Refer to “Chapter operations”. •You can go back to the Playlist View. Playlist operations Erase Playlist Press [w, q] to select “Erase” and press [ENTER]. Properties Playlist information (e.g., length and date) is shown. •Press [ENTER] to exit the screen. Create ➔ page 28, Creating playlists, Step 5-8 Copy Press [w, q] to select “Copy” and press [ENTER]. Playlist Name ➔ page 31, Entering text Change Thumbnail ➔ page 27, Change Thumbnail Chapter operations Add Chapter➔ page 28, Creating playlists, Step 5-8 Move Chapter Press [e, r, w, q] to select the position to insert the chapter and press [ENTER]. Create Chapter➔ page 27, Create Chapter Combine Chapters➔ page 27, Combine Chapters Erase Chapter ➔ page 27, Erase Chapter RAM RAM-RW(VR) Properties No. Chapters01 012Date Length6/20/2002 Wed 0:30.05Dinosaur ENTER RAM RAM RAM RAM RAM DVD-RAM PLAYLISTS Move Chapter PreviousPage 01/01Next 08 10/27 Mon 0:30--- --- --- --- --- --- --- --- --- ---001002 ENTER
RQT8009 30 Convenient functions Disc management Preparation •Turn on the television and select the appropriate video input to suit the connections to this unit. •Turn the unit on. •Insert the disc to be managed. 1While stopped Press [FUNCTIONS]. 2Press [e, r] to select “Other Functions” and press [ENTER]. 3Press [e, r] to select “DISC MANAGEMENT” and press [ENTER]. Select which step 4 to perform depending on what you want to do next. steps 1-3 (➔ above) 4Press [e, r] to select “Disc Protection” and press [ENTER]. 5Press [w, q] to select “Yes” and press [ENTER]. •For a DVD-RAM with a cartridge With the write-protect tab in the protect position, play automatically starts when inserted in the unit. Preparation •Release protection (➔ above). steps 1-3 (➔ above) 4Press [e, r] to select “Disc Name” and press [ENTER]. ➔ page 31, Entering text •The disc name is displayed in the FUNCTIONS window. •With a finalized DVD-R, DVD-RW (DVD-Video format) and +R, the name is displayed in the Top Menu. To exit the screen Press [RETURN] several times. To return to the previous screen Press [RETURN].Preparation •Release protection (➔ left). steps 1-3 (➔ left) 4Press [e, r] to select “Erase All Titles” and press [ENTER]. 5Press [w, q] to select “Yes” and press [ENTER]. 6Press [w, q] to select “Start” and press [ENTER]. A message appears when finished. 7Press [ENTER]. Note •Once erased, the recorded contents are lost and cannot be restored. Make certain before proceeding. •Erasing all video titles will result in all playlists also being erased. •Erase does not work if one or more titles are protected. Note Preparation •Release protection (➔ left). steps 1-3 (➔ left) 4Press [e, r] to select “Format Disc” and press [ENTER]. 5Press [w, q] to select “Yes” and press [ENTER]. 6Press [w, q] to select “Start” and press [ENTER]. A message appears when formatting is finished. 7Press [ENTER]. Note •To stop formatting Press [RETURN]. (You can cancel formatting if it takes more than 2 minutes. The disc must be reformatted if you do this.) •Formatting cannot be performed on DVD-R, +R or CD-R/RW. •You can format DVD-RW only as DVD-Video format on this unit. •When a disc has been formatted using this unit, it may not be possible to use it on any other equipment. To exit the screen Press [RETURN] several times. To return to the previous screen Press [RETURN]. Setting the protection Setting the protection for the whole disc Providing a disc with a name SKIP SLOW/SEARCH TIME SLIP FUNCTIONS DIRECT NAVIGATOR TOP MENU RETURN STATUS DISPLAY SUB MENU SCHEDULE CM SKIPCANCELVCR Plus+ RETURN e, r, w, q ENTER FUNCTIONS h u, i g CANCEL RAM DISC MANAGEMENTDVD-RAMTitles 11 UsedFree 0 : 225:38 (EP) Off Disc Name Erase All Titles Disc Protection The lock symbol appears closed when the disc is write-protected. PROTECT RAM-R-RW(V)+R FUNCTIONS DOCUMENTARY Cartridge Protection ODisc Protection Off OffDVD DVD-RAM Playback DIRECT NAVIGATOR My favorite 01/0201 Chapter 102Chapter 2 Erasing all titles–Erase All Titles Erasing all contents of a disc–Format Disc •Formatting erases all contents, and it cannot be restored. Check carefully before proceeding. The contents are erased when you format it even if you have set protection. •Do not disconnect the AC power supply cord while formatting. This can render the disc unusable. Formatting normally takes a few minutes. However, it may take up to a maximum of 70 minutes. RAM RAM-RW(V)-RW(VR)