Panasonic Dmr Es10 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Dmr Es10 Operating Instructions Manual. The Panasonic manuals for DVD Recorder are available online for free. You can easily download all the documents as PDF.
Page 11
![Page 11
RQT8009
11
Getting started
■If the clock is an hour slower or faster than the
actual time
Select “–1” or “+1” in “Adjust Time Zone” in the SETUP menu
(➔ page 34).
■If the unit couldn’t set the clock automatically
Set the time manually (➔ page 34, Set Clock Manually).
■To start Plug-in Auto Tuning again (after
relocation, for example)
When the unit is on and stopped
Press and hold [2 CH] and [1 CH] on the main unit for
about five seconds.
The unit turns off.
Press [^ DVD POWER] to turn the unit on....](http://img.usermanuals.tech/thumb/58/66414/w300_dmr-es10_en_om_d-10.png "Page 11
RQT8009
11
Getting started
■If the clock is an hour slower or faster than the
actual time
Select “–1” or “+1” in “Adjust Time Zone” in the SETUP menu
(➔ page 34).
■If the unit couldn’t set the clock automatically
Set the time manually (➔ page 34, Set Clock Manually).
■To start Plug-in Auto Tuning again (after
relocation, for example)
When the unit is on and stopped
Press and hold [2 CH] and [1 CH] on the main unit for
about five seconds.
The unit turns off.
Press [^ DVD POWER] to turn the unit on....")
RQT8009 11 Getting started ■If the clock is an hour slower or faster than the actual time Select “–1” or “+1” in “Adjust Time Zone” in the SETUP menu (➔ page 34). ■If the unit couldn’t set the clock automatically Set the time manually (➔ page 34, Set Clock Manually). ■To start Plug-in Auto Tuning again (after relocation, for example) When the unit is on and stopped Press and hold [2 CH] and [1 CH] on the main unit for about five seconds. The unit turns off. Press [^ DVD POWER] to turn the unit on....
Page 12
![Page 12
RQT8009
12
Getting started
STEP 3 Channel settings
Set these guide channels so you can use the VCR Plus+ system for
scheduled recording. Before starting the settings, prepare a chart
showing the channels, station names, and guide channels.
•If you have connected a cable TV box or satellite receiver, the
VCR Plus+ system does not work so you do not have to set the
guide channels.
1Press [SETUP].
2Press [e, r] to select “Channel” and
press [q].
3Press [e, r] to select “VCR Plus+ Ch.
Setting” and...](http://img.usermanuals.tech/thumb/58/66414/w300_dmr-es10_en_om_d-11.png "Page 12
RQT8009
12
Getting started
STEP 3 Channel settings
Set these guide channels so you can use the VCR Plus+ system for
scheduled recording. Before starting the settings, prepare a chart
showing the channels, station names, and guide channels.
•If you have connected a cable TV box or satellite receiver, the
VCR Plus+ system does not work so you do not have to set the
guide channels.
1Press [SETUP].
2Press [e, r] to select “Channel” and
press [q].
3Press [e, r] to select “VCR Plus+ Ch.
Setting” and...")
RQT8009 12 Getting started STEP 3 Channel settings Set these guide channels so you can use the VCR Plus+ system for scheduled recording. Before starting the settings, prepare a chart showing the channels, station names, and guide channels. •If you have connected a cable TV box or satellite receiver, the VCR Plus+ system does not work so you do not have to set the guide channels. 1Press [SETUP]. 2Press [e, r] to select “Channel” and press [q]. 3Press [e, r] to select “VCR Plus+ Ch. Setting” and...
Page 13
![Page 13
RQT8009
13
Getting started
You can give the preset captions, or manually enter new ones yourself.
The captions you enter are displayed when the channel is displayed and in the Direct Navigator screen.
1Press [SETUP].
2Press [e, r] to select “Channel” and press [q].
3Press [e, r] to select “Preset
Channel Captions” and press
[ENTER].
4Press [e, r] to select the caption and
press [q].
You can choose from the following captions.
ABC, PBS, CBS, CNN, FOX, ESPN, NBC, HBO, A&E, AMC,
FAM, MAX, MTV, SHOW,...](http://img.usermanuals.tech/thumb/58/66414/w300_dmr-es10_en_om_d-12.png "Page 13
RQT8009
13
Getting started
You can give the preset captions, or manually enter new ones yourself.
The captions you enter are displayed when the channel is displayed and in the Direct Navigator screen.
1Press [SETUP].
2Press [e, r] to select “Channel” and press [q].
3Press [e, r] to select “Preset
Channel Captions” and press
[ENTER].
4Press [e, r] to select the caption and
press [q].
You can choose from the following captions.
ABC, PBS, CBS, CNN, FOX, ESPN, NBC, HBO, A&E, AMC,
FAM, MAX, MTV, SHOW,...")
RQT8009 13 Getting started You can give the preset captions, or manually enter new ones yourself. The captions you enter are displayed when the channel is displayed and in the Direct Navigator screen. 1Press [SETUP]. 2Press [e, r] to select “Channel” and press [q]. 3Press [e, r] to select “Preset Channel Captions” and press [ENTER]. 4Press [e, r] to select the caption and press [q]. You can choose from the following captions. ABC, PBS, CBS, CNN, FOX, ESPN, NBC, HBO, A&E, AMC, FAM, MAX, MTV, SHOW,...
Page 14
![Page 14
RQT8009
14
Getting started
STEP 4 Set up to match your television and remote control
You do not have to change the setting when connected to a 4: 3
standard aspect television that is not compatible with progressive
output (➔ page 36).
1Press [SETUP].
2Press [e, r] to select “TV Screen”
and press [q].
3Press [e, r] to select “TV Type” and
press [ENTER].
•Aspect 4: 3/Aspect 16: 9:
•480p/480i:
Select “480p” if the television is compatible with progressive
output.
4Press [e, r] to select the item and...](http://img.usermanuals.tech/thumb/58/66414/w300_dmr-es10_en_om_d-13.png "Page 14
RQT8009
14
Getting started
STEP 4 Set up to match your television and remote control
You do not have to change the setting when connected to a 4: 3
standard aspect television that is not compatible with progressive
output (➔ page 36).
1Press [SETUP].
2Press [e, r] to select “TV Screen”
and press [q].
3Press [e, r] to select “TV Type” and
press [ENTER].
•Aspect 4: 3/Aspect 16: 9:
•480p/480i:
Select “480p” if the television is compatible with progressive
output.
4Press [e, r] to select the item and...")
RQT8009 14 Getting started STEP 4 Set up to match your television and remote control You do not have to change the setting when connected to a 4: 3 standard aspect television that is not compatible with progressive output (➔ page 36). 1Press [SETUP]. 2Press [e, r] to select “TV Screen” and press [q]. 3Press [e, r] to select “TV Type” and press [ENTER]. •Aspect 4: 3/Aspect 16: 9: •480p/480i: Select “480p” if the television is compatible with progressive output. 4Press [e, r] to select the item and...
Page 15
RQT8009 15 Recording Recording television programs Depending on the content being recorded, the recording times may become shorter than indicated. (Unit: hour) When “Recording Time in EP Mode” is set to “EP (6H)” in the SETUP menu. The sound quality is better when using “EP (6H)” than when using “EP (8H)”. Note When recording to DVD-RAM using EP (8H) mode, play may not be possible on DVD players that are compatible with DVD-RAM. In this case use EP (6H) mode.FR (Flexible Recording Mode) The unit...
Page 16
![Page 16
RQT8009
16
Recording
Recording television programs
Refer to the control reference on page 15.
■To pause recording
Press [h].
Press again to restart recording.
You can also press [* REC] to restart.
(Title is not split into separate titles.)
■To s t o p r e c o r d i n g
Press [g].
From the start to the end of the recording is called one title.
It takes about 30 seconds for the unit to complete recording
management information after recording finishes.
During recording
Press [* REC] to select the...](http://img.usermanuals.tech/thumb/58/66414/w300_dmr-es10_en_om_d-15.png "Page 16
RQT8009
16
Recording
Recording television programs
Refer to the control reference on page 15.
■To pause recording
Press [h].
Press again to restart recording.
You can also press [* REC] to restart.
(Title is not split into separate titles.)
■To s t o p r e c o r d i n g
Press [g].
From the start to the end of the recording is called one title.
It takes about 30 seconds for the unit to complete recording
management information after recording finishes.
During recording
Press [* REC] to select the...")
RQT8009 16 Recording Recording television programs Refer to the control reference on page 15. ■To pause recording Press [h]. Press again to restart recording. You can also press [* REC] to restart. (Title is not split into separate titles.) ■To s t o p r e c o r d i n g Press [g]. From the start to the end of the recording is called one title. It takes about 30 seconds for the unit to complete recording management information after recording finishes. During recording Press [* REC] to select the...
Page 17
![Page 17
RQT8009
17
Recording
Refer to the control reference on page 15.
The unit sets the best possible picture quality that fits the recording
within the remaining disc space. This is convenient when you want
the recorded program to fit one disc perfectly or you are concerned
about the amount of free space on the disc. The recording mode
becomes FR mode.
Preparation
Select the channel to be recorded or the external input.
While stopped
Press [F Rec].
Press [w, q] to select “Hour” and
“Min.” and press [e,...](http://img.usermanuals.tech/thumb/58/66414/w300_dmr-es10_en_om_d-16.png "Page 17
RQT8009
17
Recording
Refer to the control reference on page 15.
The unit sets the best possible picture quality that fits the recording
within the remaining disc space. This is convenient when you want
the recorded program to fit one disc perfectly or you are concerned
about the amount of free space on the disc. The recording mode
becomes FR mode.
Preparation
Select the channel to be recorded or the external input.
While stopped
Press [F Rec].
Press [w, q] to select “Hour” and
“Min.” and press [e,...")
RQT8009 17 Recording Refer to the control reference on page 15. The unit sets the best possible picture quality that fits the recording within the remaining disc space. This is convenient when you want the recorded program to fit one disc perfectly or you are concerned about the amount of free space on the disc. The recording mode becomes FR mode. Preparation Select the channel to be recorded or the external input. While stopped Press [F Rec]. Press [w, q] to select “Hour” and “Min.” and press [e,...
Page 18
RQT8009 18 Recording Scheduled recording You can enter up to 16 programs up to a month in advance. •When connecting a cable TV box or satellite receiver, the VCR Plus+ system does not work. Program the scheduled recording manually and select the channel on the cable TV box or satellite receiver before the scheduled recording starts. Preparation •Turn on the television and select the appropriate video input to suit the connections to this unit. •Check that the time on the unit is correct. Entering VCR...
Page 19
![Page 19
RQT8009
19
Recording
You can enter up to 16 programs up to a month in advance. (Each
daily or weekly program is counted as one program.)
•When connecting a cable TV box or satellite receiver, select the
channel on the cable TV box or satellite receiver before the
scheduled recording starts.
1Press [SCHEDULE].
2Press [e, r] to select “New
Scheduled Recording” and press
[ENTER].
3Press [q] to move through the items
and change the items with [e, r].
•Press and hold [e, r] to alter On (Start time)...](http://img.usermanuals.tech/thumb/58/66414/w300_dmr-es10_en_om_d-18.png "Page 19
RQT8009
19
Recording
You can enter up to 16 programs up to a month in advance. (Each
daily or weekly program is counted as one program.)
•When connecting a cable TV box or satellite receiver, select the
channel on the cable TV box or satellite receiver before the
scheduled recording starts.
1Press [SCHEDULE].
2Press [e, r] to select “New
Scheduled Recording” and press
[ENTER].
3Press [q] to move through the items
and change the items with [e, r].
•Press and hold [e, r] to alter On (Start time)...")
RQT8009 19 Recording You can enter up to 16 programs up to a month in advance. (Each daily or weekly program is counted as one program.) •When connecting a cable TV box or satellite receiver, select the channel on the cable TV box or satellite receiver before the scheduled recording starts. 1Press [SCHEDULE]. 2Press [e, r] to select “New Scheduled Recording” and press [ENTER]. 3Press [q] to move through the items and change the items with [e, r]. •Press and hold [e, r] to alter On (Start time)...
Page 20
RQT8009 20 Playing back Playing discs Preparation •Turn on the television and select the appropriate video input to suit the connections to this unit. •Turn on this unit. •It is not possible to play continuously from one side of a double sided disc to the other. You will need to eject the disc and turn it over. •When using 8 cm (3″) DVD-RAM or 8 cm (3″) DVD-R, remove the disc from the cartridge. •For a DVD-RAM with a cartridge With the write-protect tab in the protect position, play automatically...