Panasonic Dmr Eh55 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Dmr Eh55 Operating Instructions Manual. The Panasonic manuals for DVD Recorder are available online for free. You can easily download all the documents as PDF.
Page 21
21 RQT8365 Please perform setup by following all instructions that apply to your current service. DirecTV/DISH Network service is only available in the United States and is not available or supported in Canada. Once setup is finished ➡22, Step 7, Confirm the settings. Continued on next page ServiceSet the following Antenna≥You cannot select both “Antenna” and “Cable without a Cable Box”. ≥Further setup is not necessary. Cable without a Cable Box Cable with a Cable Box 1Cable box connection channel...
Page 22
![Page 22
22
RQT8365
STEP 2 Setting up the TV Guide On ScreenTM system
Refer to the control reference on page 20.
7Confirm the settings.
e.g.,
–If the information is correct, select “Yes, continue setup process”.–If the information is not correct, select “No, repeat setup
process” to start the setting again.
8Press [ENTER].
Depending on the equipment that you connected, one of
the following screens appears.
Press [ENTER].
The unit starts setting channels automatically. This takes a
few minutes. The unit then...](http://img.usermanuals.tech/thumb/58/66410/w300_dmr-eh55_en_om_d-21.png "Page 22
22
RQT8365
STEP 2 Setting up the TV Guide On ScreenTM system
Refer to the control reference on page 20.
7Confirm the settings.
e.g.,
–If the information is correct, select “Yes, continue setup process”.–If the information is not correct, select “No, repeat setup
process” to start the setting again.
8Press [ENTER].
Depending on the equipment that you connected, one of
the following screens appears.
Press [ENTER].
The unit starts setting channels automatically. This takes a
few minutes. The unit then...")
22 RQT8365 STEP 2 Setting up the TV Guide On ScreenTM system Refer to the control reference on page 20. 7Confirm the settings. e.g., –If the information is correct, select “Yes, continue setup process”.–If the information is not correct, select “No, repeat setup process” to start the setting again. 8Press [ENTER]. Depending on the equipment that you connected, one of the following screens appears. Press [ENTER]. The unit starts setting channels automatically. This takes a few minutes. The unit then...
Page 23
![Page 23
23
RQT8365
STEP 4Set up to match your television and the unit’s remote control
This setting allows you to select the type of television connected.
1While stopped
Press [FUNCTIONS].
2Press [3,4] to select “Other
Functions” and press [ENTER].
3Press [3,4] to select “Setup” and
press [ENTER].
4Press [3,4] to select “TV Screen”
and press [1].
5Press [3,4] to select “TV Type” and
press [ENTER].
≥Aspect 4:3/Aspect 16:9:
≥480p/480i:
–Select “480p” if the television is compatible with
progressive output....](http://img.usermanuals.tech/thumb/58/66410/w300_dmr-eh55_en_om_d-22.png "Page 23
23
RQT8365
STEP 4Set up to match your television and the unit’s remote control
This setting allows you to select the type of television connected.
1While stopped
Press [FUNCTIONS].
2Press [3,4] to select “Other
Functions” and press [ENTER].
3Press [3,4] to select “Setup” and
press [ENTER].
4Press [3,4] to select “TV Screen”
and press [1].
5Press [3,4] to select “TV Type” and
press [ENTER].
≥Aspect 4:3/Aspect 16:9:
≥480p/480i:
–Select “480p” if the television is compatible with
progressive output....")
23 RQT8365 STEP 4Set up to match your television and the unit’s remote control This setting allows you to select the type of television connected. 1While stopped Press [FUNCTIONS]. 2Press [3,4] to select “Other Functions” and press [ENTER]. 3Press [3,4] to select “Setup” and press [ENTER]. 4Press [3,4] to select “TV Screen” and press [1]. 5Press [3,4] to select “TV Type” and press [ENTER]. ≥Aspect 4:3/Aspect 16:9: ≥480p/480i: –Select “480p” if the television is compatible with progressive output....
Page 24
![Page 24
24
RQT8365
Recording television programs
See also “Important notes for recording” (➡ 8).
Depending on the type of disc used for recording or the type of
broadcast, there may be restrictions on the title you are trying to
record.
[Note]
≥It is not possible to record to both HDD (Hard Disk Drive) and DVD
drive simultaneously.
≥[+RW] You can create a Top Menu using “Create DVD Top Menu”
(➡ 58).
Recording or editing on the disc may delete the menu. In that case,
create the menu again.
[HDD]
≥You can...](http://img.usermanuals.tech/thumb/58/66410/w300_dmr-eh55_en_om_d-23.png "Page 24
24
RQT8365
Recording television programs
See also “Important notes for recording” (➡ 8).
Depending on the type of disc used for recording or the type of
broadcast, there may be restrictions on the title you are trying to
record.
[Note]
≥It is not possible to record to both HDD (Hard Disk Drive) and DVD
drive simultaneously.
≥[+RW] You can create a Top Menu using “Create DVD Top Menu”
(➡ 58).
Recording or editing on the disc may delete the menu. In that case,
create the menu again.
[HDD]
≥You can...")
24 RQT8365 Recording television programs See also “Important notes for recording” (➡ 8). Depending on the type of disc used for recording or the type of broadcast, there may be restrictions on the title you are trying to record. [Note] ≥It is not possible to record to both HDD (Hard Disk Drive) and DVD drive simultaneously. ≥[+RW] You can create a Top Menu using “Create DVD Top Menu” (➡ 58). Recording or editing on the disc may delete the menu. In that case, create the menu again. [HDD] ≥You can...
Page 25
25 RQT8365 Depending on the content being recorded, the recording times may become shorter than indicated. (The times provided on this chart are an estimate.) §1It is not possible to record or play continuously from one side of a double sided disc to the other.§2When “Recording Time in EP Mode” is set to “EP (6H)” in the Setup menu (➡61). The sound quality is better when using “EP (6H)” than when using “EP (8H)”. §3You cannot directly record to these discs with this unit. The table shows the recording...
Page 26
![Page 26
26
RQT8365
Recording television programs
The unit switches to standby after about 6 hours in the stop mode.
You can turn this feature off or change the time to 2 hours (➡60, “Off
Timer”).
(When connecting to a TV using the Video or S-Video terminal)
From the power on state, recording starts about 1 second
§ after the
[¥REC] is pressed. If [TV GUIDE] is pressed while the unit is off,
the Electronic Program Guide (EPG) starts being displayed in less
than 1 second, with the full EPG being displayed in...](http://img.usermanuals.tech/thumb/58/66410/w300_dmr-eh55_en_om_d-25.png "Page 26
26
RQT8365
Recording television programs
The unit switches to standby after about 6 hours in the stop mode.
You can turn this feature off or change the time to 2 hours (➡60, “Off
Timer”).
(When connecting to a TV using the Video or S-Video terminal)
From the power on state, recording starts about 1 second
§ after the
[¥REC] is pressed. If [TV GUIDE] is pressed while the unit is off,
the Electronic Program Guide (EPG) starts being displayed in less
than 1 second, with the full EPG being displayed in...")
26 RQT8365 Recording television programs The unit switches to standby after about 6 hours in the stop mode. You can turn this feature off or change the time to 2 hours (➡60, “Off Timer”). (When connecting to a TV using the Video or S-Video terminal) From the power on state, recording starts about 1 second § after the [¥REC] is pressed. If [TV GUIDE] is pressed while the unit is off, the Electronic Program Guide (EPG) starts being displayed in less than 1 second, with the full EPG being displayed in...
Page 27
![Page 27
27
RQT8365
[HDD] [RAM]
Press [1] (PLAY) during recording.
≥There is no sound output while searching forward or backward.
To stop play
Press [∫].
To stop recording
2 seconds after play stops
Press [∫].
To stop scheduled recording
1 Press [∫] to stop playing.
2 2 seconds after play stops
Press [∫], then press [2,1] to select “Stop recording” and press
[ENTER].
(Scheduled recording ➡ 28)
≥You can also change the drive and play while recording. Press
[DRIVE SELECT] to select the HDD or DVD recording...](http://img.usermanuals.tech/thumb/58/66410/w300_dmr-eh55_en_om_d-26.png "Page 27
27
RQT8365
[HDD] [RAM]
Press [1] (PLAY) during recording.
≥There is no sound output while searching forward or backward.
To stop play
Press [∫].
To stop recording
2 seconds after play stops
Press [∫].
To stop scheduled recording
1 Press [∫] to stop playing.
2 2 seconds after play stops
Press [∫], then press [2,1] to select “Stop recording” and press
[ENTER].
(Scheduled recording ➡ 28)
≥You can also change the drive and play while recording. Press
[DRIVE SELECT] to select the HDD or DVD recording...")
27 RQT8365 [HDD] [RAM] Press [1] (PLAY) during recording. ≥There is no sound output while searching forward or backward. To stop play Press [∫]. To stop recording 2 seconds after play stops Press [∫]. To stop scheduled recording 1 Press [∫] to stop playing. 2 2 seconds after play stops Press [∫], then press [2,1] to select “Stop recording” and press [ENTER]. (Scheduled recording ➡ 28) ≥You can also change the drive and play while recording. Press [DRIVE SELECT] to select the HDD or DVD recording...
Page 28
![Page 28
28
RQT8365
Scheduled recording
See also “Important notes for recording” (➡ 8).
Depending on the type of disc used for recording or the type of
broadcast, there may be restrictions on the title you are trying to
record.
[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]
Preparation
≥Turn on the television and select the appropriate video input to suit
the connections to this unit.
≥If recording to DVD, insert a disc that you can use for recording
(➡ 13).
If you are performing a scheduled recording with the TV Guide...](http://img.usermanuals.tech/thumb/58/66410/w300_dmr-eh55_en_om_d-27.png "Page 28
28
RQT8365
Scheduled recording
See also “Important notes for recording” (➡ 8).
Depending on the type of disc used for recording or the type of
broadcast, there may be restrictions on the title you are trying to
record.
[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]
Preparation
≥Turn on the television and select the appropriate video input to suit
the connections to this unit.
≥If recording to DVD, insert a disc that you can use for recording
(➡ 13).
If you are performing a scheduled recording with the TV Guide...")
28 RQT8365 Scheduled recording See also “Important notes for recording” (➡ 8). Depending on the type of disc used for recording or the type of broadcast, there may be restrictions on the title you are trying to record. [HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW] Preparation ≥Turn on the television and select the appropriate video input to suit the connections to this unit. ≥If recording to DVD, insert a disc that you can use for recording (➡ 13). If you are performing a scheduled recording with the TV Guide...
Page 29
![Page 29
29
RQT8365
You can manually set the date, channel, start and end times and so
on for programs you want to record.
1Press [SCHEDULE].
2Press [SUB MENU].
Schedule Options menu is displayed.
3Press [3,4] to select “new manual
recording” and press [ENTER].
4Enter the settings.
Press [3,4] to select the item and press [2,1] or the
numbered buttons to change the setting.
5Press [3] to select “schedule
recording” and press [ENTER].
Press [3,4] to select “TO DO” and repeat steps 2–5 to
program other...](http://img.usermanuals.tech/thumb/58/66410/w300_dmr-eh55_en_om_d-28.png "Page 29
29
RQT8365
You can manually set the date, channel, start and end times and so
on for programs you want to record.
1Press [SCHEDULE].
2Press [SUB MENU].
Schedule Options menu is displayed.
3Press [3,4] to select “new manual
recording” and press [ENTER].
4Enter the settings.
Press [3,4] to select the item and press [2,1] or the
numbered buttons to change the setting.
5Press [3] to select “schedule
recording” and press [ENTER].
Press [3,4] to select “TO DO” and repeat steps 2–5 to
program other...")
29 RQT8365 You can manually set the date, channel, start and end times and so on for programs you want to record. 1Press [SCHEDULE]. 2Press [SUB MENU]. Schedule Options menu is displayed. 3Press [3,4] to select “new manual recording” and press [ENTER]. 4Enter the settings. Press [3,4] to select the item and press [2,1] or the numbered buttons to change the setting. 5Press [3] to select “schedule recording” and press [ENTER]. Press [3,4] to select “TO DO” and repeat steps 2–5 to program other...
Page 30
![Page 30
30
RQT8365
Scheduled recording
Refer to the control reference on page 28.
1Press [SCHEDULE].
2Press [3,4] to select the program.
3Press [SUB MENU].
Schedule Options menu is displayed.
∫To change the recording settings1 Press [3,4] to select “edit recording” and press
[ENTER].
2 Press [3,4] to select the item and press [2,1] or the
numbered buttons to change the setting as necessary.
3 Press [3] to select “schedule recording” and press
[ENTER].
∫To delete the program
1 Press [3,4] to select “delete...](http://img.usermanuals.tech/thumb/58/66410/w300_dmr-eh55_en_om_d-29.png "Page 30
30
RQT8365
Scheduled recording
Refer to the control reference on page 28.
1Press [SCHEDULE].
2Press [3,4] to select the program.
3Press [SUB MENU].
Schedule Options menu is displayed.
∫To change the recording settings1 Press [3,4] to select “edit recording” and press
[ENTER].
2 Press [3,4] to select the item and press [2,1] or the
numbered buttons to change the setting as necessary.
3 Press [3] to select “schedule recording” and press
[ENTER].
∫To delete the program
1 Press [3,4] to select “delete...")
30 RQT8365 Scheduled recording Refer to the control reference on page 28. 1Press [SCHEDULE]. 2Press [3,4] to select the program. 3Press [SUB MENU]. Schedule Options menu is displayed. ∫To change the recording settings1 Press [3,4] to select “edit recording” and press [ENTER]. 2 Press [3,4] to select the item and press [2,1] or the numbered buttons to change the setting as necessary. 3 Press [3] to select “schedule recording” and press [ENTER]. ∫To delete the program 1 Press [3,4] to select “delete...