Panasonic Dmr Ea38 Operating Instructions Manual

81
RQT9058
Cannot record. 
  You haven’t inserted a disc or the disc you inserted cannot be recorded on. 
Insert a disc the unit can record onto.66
  [RAM] [-RW‹V›] [+RW] The disc is unformatted. Format the disc.48
  The write-protect tab on the cartridge is set to “PROTECT” or the disc is 
protected with the “DVD Management” settings.47
  Some programs have limitations on the number of times they can be 
recorded (CPRM).21, 66, 
84
  The disc is full or nearly full. Delete unneeded recordings or...

82
RQT9058
Recording does not stop even when 
[ STOP] is pressed.  If you start recording immediately after turning on the unit while “Quick 
Start” is set to “On”, you cannot stop recording for a few seconds.53
Scheduled recording does not work 
properly.  The scheduled recording program is incorrect or different scheduled 
recording times overlap. Correct the program.25
  The unit is not on scheduled recording standby. (“” on the unit’s display 
is not on.) Press [ DVD/VHS POWER] to turn the unit...

83
RQT9058
Cannot display the Direct Navigator 
screen. This screen cannot be displayed while recording or copying.
Cannot edit or format a card. 
 Release the card’s protection setting. With some cards, the “Write 
Protection Off ” message sometimes appears on the screen even when 
protection has been set.47
The contents of the card cannot be 
read. The card format is not compatible with the unit. The contents on the card 
may be damaged.68
 Format using FAT12, FAT16 or FAT32 with other equipment or...

84
RQT9058
Glossary
BitstreamThis is a signal compressed and converted into digital form. It is 
converted back to a multi-channel audio signal, e.g., 5.1-channel, by a 
decoder.
CPRM (Content Protection for Recordable Media)CPRM is technology used to protect broadcasts that are allowed to 
be recorded only once. Such broadcasts can be recorded only with 
CPRM-compatible recorders and discs.
DecoderA decoder restores the coded audio signals on DVDs to normal. This is 
called decoding.
Dolby DigitalThis...

85
RQT9058
Speci cations
Power supply:   AC 120 V, 60 Hz
Power consumption:   Approx. 34 W
Standby mode:  (Shipping Condition)  Approx. 3.1 W
(User Setting: Quick Start: ON)  Approx. 13.3 WVideo system:
Recording system: (for DVD)
MPEG2 (Hybrid VBR)
Input:
LINE (pin jack) 2 1.0 Vp-p; 75 
S connector 2Y: 
1.0 Vp-p; 75 
C:
0.286 Vp-p; 75 
Output: (for DVD PRIORITY 1)
LINE (pin jack) 2 1.0 Vp-p; 75 
S connector 1Y:
1.0 Vp-p; 75 
C: 
0.286 Vp-p; 75 
Component video output: (for DVD PRIORITY)
Y,  P...

86
RQT9058
Product Service 
1.  Damage requiring serviceThe unit should be serviced by 
qualified service personnel if:
(a)  The AC power supply cord or AC adaptor has been 
damaged; or
(b)  Objects or liquids have gotten into the unit; or
(c)  The unit has been exposed to rain; or
(d)  The unit does not operate normally or exhibits a marked 
change in performance; or
(e)  The unit has been dropped or the cabinet damaged.
2.  ServicingDo not attempt to service the unit beyond that 
described in these...

87
RQT9058
Limited Warranty
Limited Warranty  Coverage
If your product does not work properly because of a defect in materials or workmanship, 
Panasonic Consumer Electronics Company or Panasonic Puerto Rico, Inc. (collectively 
referred to as “the warrantor”) will, for the length of the period indicated on the chart below, 
which starts with the date of original purchase (“warranty period”), at its option either (a) 
repair your product with new or refurbished parts, or (b) replace it with a new or a...

88
RQT9058
Referencia rápida en español (Spanish Quick Reference)
Nota:  Puede que los terminales en el panel 
trasero de su TV y en el aparato integrando 
el convertidor y el descodi cador no 
sean similares a como se ilustran a 
continuación. Por favor consulte las 
etiquetas de los terminales con atención 
para asegurar conexiones correctas.
Conexión básica
Para disfrutar de una mejor calidad de imagen
Conexión a una televisión y un aparato 
integrando el convertidor y el descodi cador
 El terminal S...

RQT9058
89
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-V] 
[-RW‹VR›] [CD] [VHS]
 POWERDVD/VHS 
  para encender el aparato.
 
DRIVE
 SELECT
  para seleccionar el 
dispositivo (DVD o VHS). 
Reproducción de discos o videocasetes
  Inserte un disco o videocasete VHS.
 PLAY
 Consejos prácticos
Detener la reproducción
Oprima [ STOP].
[DVD]
– La posición de detención se memoriza.
– La posición de detención se borrará al pulsar el botón 
[ STOP] dos o más veces, o al pulsar [OPEN/CLOSE].
Pausar la...

90
RQT9058
Referencia rápida en español (Spanish Quick Reference)
 POWERDVD/VHS 
  para encender el aparato.
  
Inserte un disco o videocasete VHS.
4a  Cuando el aparato integrante el convertidor y el 
descodi cador se controla con esta unidad:
TRACKING/V-LOCK
CH
  para seleccionar el canal 
deseado.
 o
4b Cuando el aparato integrante el convertidor y el 
descodi cador no está controlado con esta unidad:
 INPUT SELECT  para seleccionar “IN1” o 
“IN2”.
–  Seleccione un canal en el equipo conectado.
 
REC...