Panasonic Dmr E75 Operating Instructions Manual

Advanced Operations
61
You can specify the position to start transfer (dubbing) of the 
program recorded on the disc to the tape.
≥Copy-guarded discs cannot be dubbed. Most discs are copy-
guarded to prevent illegal reproduction and they cannot be 
recorded with the following procedure.
Preparation
≥Select the unit viewing channel (or the AV input) on the TV.
DVD
≥Insert the disc containing the program to be copied (l20).
≥Check the channel. If “TP” channel is selected, transfer (dubbing) 
does not work...

Advanced Operations
62
When connecting to the L2 input terminals on the front of the unit
≥You can also connect to the L1 input terminals on the rear of the unit.
Before connecting any cables, first make sure that the power for 
both units is off. Then, after connecting cables, turn on both units.
Note
≥When recording using this unit’s input terminals, only the sound 
received at the time of recording will be recorded. As long as 
secondary audio that is recorded on the media in the external device 
is...

63
Helpful Hints
Bitstream
This is the digital form of multi-channel audio data (e.g., 5.1 channel) 
before it is decoded into its various channels.
CPRM (Content Protection for Recordable Media)
CPRM is technology used to protect broadcasts that are allowed to 
be recorded only once. Such broadcasts can be recorded only with 
CPRM compatible recorders and discs.
Dynamic range
Dynamic range is the difference between the lowest level of sound 
that can be heard above the noise of the equipment and the...

Helpful Hints
64
Set upPage
DiscPage
RecordingPage
Frequently asked questions
What equipment is necessary to 
play multi channel surround 
sound?≥DVD-Video:
You can play DVD-Video multi channel surround by digitally connecting an amplifier 
equipped with a Dolby Digital and a DTS decoder.
≥DVD-Audio:
This unit plays DVD-Audio in 2 channels. You cannot play multi channel surround sound.12
–
Are the headphones and speakers 
directly connected to the unit?≥You cannot directly connect to the unit. Connect...

Helpful Hints
65
On the unit’s displayPage
On the TVPage
On the unit’s displayPage
On the TVPage
Error messages
∫ Common
H, F
(“” stands for a number.)≥An error has occurred. The number following “H” or “F” depends on the status of the 
unit.
Reset procedure:
Press [POWER Í/I] to switch the unit to standby mode and then back to ON. 
Alternatively, press [POWER Í/I] to switch the unit to standby mode, disconnect the 
AC power supply cord, and then reconnect it.
≥If the service numbers fail to clear,...

Helpful Hints
66
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the 
chart do not solve the problem, refer to the “Customer Services Directory” on page 71 if you reside in the U.S.A., or refer to “Product 
information” on page 70 if you reside in Canada. In other areas, consult your dealer.
PowerPage
DisplaysPage
OperationPage
Troubleshooting guide
The following do not indicate a problem with this unit:
≥Regular...

Helpful Hints
67
PicturePage
Recording, Timer recording, Transfer (dubbing), External input Page
TV reception worsens after 
connecting the unit.≥This can occur because the signals are being divided between the unit and other equipment. 
It can be solved by using a signal booster, available from audio-visual suppliers.–
The images from this unit do 
not appear on the TV.
Picture is distorted.≥Make sure that the TV is connected to the VIDEO OUT terminal, S-VIDEO OUT terminal or 
COMPONENT VIDEO OUT...

Helpful Hints
68
DVD PicturePage
DVD SoundPage
DVD PlayPage
∫ DVD
Status messages do not 
appear.≥Select “Automatic” in “Status Messages” in the SETUP menu.
45
The blue background does not 
appear.≥Select “On” in “Blue Background” in the SETUP menu.45
The 4:3 aspect ratio picture 
expands left and right.
Screen size is wrong.≥Use the TV to change the aspect. If your TV does not have that function, set “Progressive” in 
the Video menu to “OFF”.
≥Check the settings for “TV Type”, “4:3 TV Settings for...

Helpful Hints
69
DVD Recording, timer recordingPage
DVD EditPage
VHS PicturePage
VHS SoundPage
VHS PlayPage
VHS Recording, timer recordingPage
Cannot record.≥You haven’t inserted a disc or the disc you inserted cannot be recorded on. Insert a disc the 
unit can record onto.
≥The disc is unformatted. Format the disc. [RAM]
≥The write-protect tab on the cartridge is set to “PROTECT” or the disc is protected with “DISC 
SETTING”.
≥Some programs have limitations on the number of times they can be recorded...

Helpful Hints
70
1. Damage requiring service — The unit should be serviced by qualified service personnel if:
(a)The AC power supply cord or AC adaptor has been damaged; or
(b)Objects or liquids have gotten into the unit; or
(c)The unit has been exposed to rain; or
(d)The unit does not operate normally or exhibits a marked change in performance; or
(e)The unit has been dropped or the cabinet damaged.
2. Servicing — Do not attempt to service the unit beyond that described in these operating instructions....