Panasonic Dmr E65 Operating Instructions Manual

11
RQT7303
Getting started
If you are using a cable TV box, set the following:
≥Cable TV box connection channel (Ch2/Ch3/Ch4/L3)
–If you are connecting the cable TV box to this unit’s IN3 (L3) 
terminal, select “L3”.
–If you are connecting the cable TV box to this unit’s RF terminal, 
select “Ch2”, “Ch3” or “Ch4”, according to the cable TV box 
setting.
≥Cable TV box brand
(Move down with [4] for more brands. Select “Not Listed” if you 
cannot find your cable TV box on the list.)
≥IR signal code
Make...

12
RQT7303
Getting started
STEP 3Set up to match your television and remote control
You do not have to change the setting when connected to a 4:3 
standard aspect television that is not compatible with progressive 
output (➡page 48).
1Press [SETUP].
2Press [3,4] to select “TV Screen” 
and press [1].
3Press [3,4] to select “TV Type” and 
press [ENTER].
≥Aspect 4:3/Aspect 16:9:
≥480P/480I:
Select “480P” if the television is compatible with 
progressive output.
4Press [3,4] to select the item and 
press...

13
RQT7303
Getting started
Change the remote control code on the main unit and the remote 
control (the two must match) if you place other Panasonic products 
close together.
Use “1”, the factory set code, under normal circumstances. 
1Press [SETUP].
2Press [3,4] to select “Set Up” and 
press [1].
3Press [3,4] to select “Remote 
Control Code” and press [ENTER].
4Press [3,4] to select the code (1, 2, 
or 3) and press [ENTER].
5To change the code on the remote control
While pressing [ENTER], press and...

14
RQT7303
Getting started
Disc and card information
≥We recommend using Panasonic discs and cards. DVD-R from other manufacturers may not be recorded or played due to the condition of the 
recording.
∫Which should I use, DVD-RAM or DVD-R?
The following chart indicates the differences. Select based upon what you require.
§1You can erase, enter name and change thumbnail. Available 
space does not increase after erasing.
§2Only on DVD-RAM compatible players.§3After finalizing the disc (➡page 41, 48).§4Only...

15
RQT7303
Getting started
Cards useable on this unit
Type Instructions
SD Memory Card
MultiMediaCardYou can insert directly into 
the SD card slot.
[SD]≥You can play and transfer (dub) still pictures taken on a digital camera etc. 
(➡page 28, 38).
≥You can set the DPOF (Digital Print Order Format) for automatic printing on your 
home printer or at a photo developing store (➡page 36, 48).
≥Compatible with: FAT 12 or FAT 16
≥We recommend using a Panasonic SD card.
≥You cannot use SD cards that exceed 2...

16
RQT7303
Recording
Recording television programs
[RAM] [DVD-R]
≥You can record up to 99 titles on one disc.
≥It is not possible to record continuously from one side of a double 
sided disc to the other. You will need to eject the disc and turn it over.
≥When using 8 cm (3″) DVD-RAM, remove the disc from the cartridge.≥It is not possible to record CPRM (➡page 48) protected material 
onto DVD-R or 2.8 GB DVD-RAM discs.
≥It is not possible to record to a card.
Preparation
Press [RETURN] to exit the...

17
RQT7303
Recording
∫To specify a time to stop recording—One Touch 
Recording
During recording
Press [¥REC] to select the recording time.
Each time you press the button:
≥This does not work during timer recordings (➡page 19) or while 
using Flexible Recording (➡page 18).
To stop recording partway
Press [∫].
Off Timer
The unit switches to standby after about 6 hours in the stop mode. 
You can turn this feature off or change the time to 2 hours 
(➡page 42, “Off Timer”).
Depending on the content being...

18
RQT7303
Recording
Recording television programs
Refer to the control reference on page 16.
[RAM]
While recording to the DVD-RAM you can view the title being 
recorded from the beginning as well as play a recorded title.
Press [1](PLAY).
Time Slip indicator on the main unit lights.
1Press [DIRECT NAVIGATOR].
2Press [3,4,2,1] to select a title 
and press [ENTER].
Time Slip indicator on the main unit lights.
To exit the Direct Navigator screen
Press [DIRECT NAVIGATOR].
1Press [TIME SLIP].
Time Slip...

19
RQT7303
Recording
Timer recording
[RAM] [DVD-R]
You can perform timer recording easily by just marking the desired 
program(s) in a television program list.
≥You can enter up to 8 days in advance.
≥The program name becomes the recorded title if the program is 
listed on the television program list.
1Press [TV GUIDE].
2Press [3,4,2,1] to select the 
program.
≥To skip one screen
Press [PAGE WXCH].
≥To skip 24 hours in the list
Press [3,4,2,1] to select “LISTINGS” and:
Press the “Green” button...

20
RQT7303
Recording
Timer recording
1Press [PROG/CHECK].
2Press the “Green” button.
3Enter the settings.
≥To enter the date
Press [3,4] to select “Date” and press the numbered 
buttons.
(Date: Month/Day/Year)
≥To enter the time
Press [3,4] to select “Start Time” or “End Time” and press 
the numbered buttons.
–You can set up to 8 hours.
–To change am/pm
Press [2,1] to select “am” or “pm” and press the “Blue” 
button.≥To enter the channel
Press [3,4] to select “Channel” and press the numbered 
buttons....