Panasonic Dmr E60 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Dmr E60 Operating Instructions Manual. The Panasonic manuals for DVD Recorder are available online for free. You can easily download all the documents as PDF.
Page 11
11 RQT6981 Setting up SD/PC card and still pictures §1A PC card adapter conforming to PC card standards is necessary.§2Can only play still pictures and save to DVD-RAM.§3Content saved on SD media storage (SV-PT1). ≥Compatible with: FAT 12 or FAT 16 (Mobile hard disk is also FAT 32 compatible) ≥Use this unit to format a memory card when using for the first time (➜page 36). Note that the memory card may no longer be usable on other equipment once formatted on this unit. ≥This unit operates in accordance...
Page 12
12 RQT6981 Setting up Control reference guide 1POWER button (Í, DVD (POWER)) . . . . . . . . . . . . . . . . . . 7, 14 Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. 2VCR Plusr button (VCR Plusr) . . . . . . . . . . . . . . . . . . . . . . 24 3Disc tray open/close button (< OPEN/CLOSE). . . . . . . . . . 14 4Numbered buttons (1–9, 0, 100) 5Cancel button (CANCEL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 13
13 RQT6981 Setting up Controls such as 1 function the same as the buttons on the remote control. URemote control signal sensor . . . . . . . . . . . . . . . . . . . . . . . . . 6 VSD card slot (SD CARD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 WPC card slot (PC CARD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 XPC card eject button (EJECT) . . . . . . . . . . . . . . . . . . . . . . . . 18 YDisc tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 14
![Page 14
14
RQT6981
Recording
Recording television programs
You can insert a cartridge or non-cartridge disc.
[Note]
≥Load double-sided discs so the label for the side you want to
record/play is facing up.
≥When using 8 cm (3″) DVD-RAM, remove the disc from the car-
tridge and insert it, making sure you align it with the groove.[RAM] [DVD-R]
1Press [Í, DVD POWER] to turn the
unit on.
2Press [< OPEN/CLOSE] to open the
tray and insert a disc (➜left).
≥Press the button again to close the tray.
≥It is not possible to...](http://img.usermanuals.tech/thumb/58/66401/w300_dmr-e60_en_om_d-13.png "Page 14
14
RQT6981
Recording
Recording television programs
You can insert a cartridge or non-cartridge disc.
[Note]
≥Load double-sided discs so the label for the side you want to
record/play is facing up.
≥When using 8 cm (3″) DVD-RAM, remove the disc from the car-
tridge and insert it, making sure you align it with the groove.[RAM] [DVD-R]
1Press [Í, DVD POWER] to turn the
unit on.
2Press [< OPEN/CLOSE] to open the
tray and insert a disc (➜left).
≥Press the button again to close the tray.
≥It is not possible to...")
14 RQT6981 Recording Recording television programs You can insert a cartridge or non-cartridge disc. [Note] ≥Load double-sided discs so the label for the side you want to record/play is facing up. ≥When using 8 cm (3″) DVD-RAM, remove the disc from the car- tridge and insert it, making sure you align it with the groove.[RAM] [DVD-R] 1Press [Í, DVD POWER] to turn the unit on. 2Press [< OPEN/CLOSE] to open the tray and insert a disc (➜left). ≥Press the button again to close the tray. ≥It is not possible to...
Page 15
![Page 15
15
RQT6981
Recording
[RAM] [DVD-R]
The unit calculates a recording rate that enables the recording to fit
in the time you set (within the remaining time on the disc) and with
the best possible picture quality.
1While stopped
Press [F Rec].
2Press [2, 1] to
select “Hour” and
“Min.” and press [3,
4] to set the record-
ing time.
3Press [3, 4, 2, 1] to select “Start”
and press [ENTER].
Recording starts.
[Note]
It may not be possible to record to the finish of the program if the
remaining time doesn’t allow....](http://img.usermanuals.tech/thumb/58/66401/w300_dmr-e60_en_om_d-14.png "Page 15
15
RQT6981
Recording
[RAM] [DVD-R]
The unit calculates a recording rate that enables the recording to fit
in the time you set (within the remaining time on the disc) and with
the best possible picture quality.
1While stopped
Press [F Rec].
2Press [2, 1] to
select “Hour” and
“Min.” and press [3,
4] to set the record-
ing time.
3Press [3, 4, 2, 1] to select “Start”
and press [ENTER].
Recording starts.
[Note]
It may not be possible to record to the finish of the program if the
remaining time doesn’t allow....")
15 RQT6981 Recording [RAM] [DVD-R] The unit calculates a recording rate that enables the recording to fit in the time you set (within the remaining time on the disc) and with the best possible picture quality. 1While stopped Press [F Rec]. 2Press [2, 1] to select “Hour” and “Min.” and press [3, 4] to set the record- ing time. 3Press [3, 4, 2, 1] to select “Start” and press [ENTER]. Recording starts. [Note] It may not be possible to record to the finish of the program if the remaining time doesn’t allow....
Page 16
![Page 16
16
RQT6981
Playing back
Playing discs
[RAM] [DVD-R] [DVD-A] [DVD-V] [VCD] [CD] [MP3]
1Press [Í, DVD POWER] to turn the
unit on.
2Press [< OPEN/CLOSE] to open the
tray and insert a disc (➜page 14).
≥Press the button again to close the tray.
≥If cartridge protection is activated (➜page 10), play begins
automatically when you close the tray. [RAM]
≥You cannot play continuously from one side of a double-
sided disc to the other. Eject the disc and turn it over.
3Press [1] (PLAY).
The unit takes some time to...](http://img.usermanuals.tech/thumb/58/66401/w300_dmr-e60_en_om_d-15.png "Page 16
16
RQT6981
Playing back
Playing discs
[RAM] [DVD-R] [DVD-A] [DVD-V] [VCD] [CD] [MP3]
1Press [Í, DVD POWER] to turn the
unit on.
2Press [< OPEN/CLOSE] to open the
tray and insert a disc (➜page 14).
≥Press the button again to close the tray.
≥If cartridge protection is activated (➜page 10), play begins
automatically when you close the tray. [RAM]
≥You cannot play continuously from one side of a double-
sided disc to the other. Eject the disc and turn it over.
3Press [1] (PLAY).
The unit takes some time to...")
16 RQT6981 Playing back Playing discs [RAM] [DVD-R] [DVD-A] [DVD-V] [VCD] [CD] [MP3] 1Press [Í, DVD POWER] to turn the unit on. 2Press [< OPEN/CLOSE] to open the tray and insert a disc (➜page 14). ≥Press the button again to close the tray. ≥If cartridge protection is activated (➜page 10), play begins automatically when you close the tray. [RAM] ≥You cannot play continuously from one side of a double- sided disc to the other. Eject the disc and turn it over. 3Press [1] (PLAY). The unit takes some time to...
Page 17
![Page 17
17
RQT6981
Playing back
[VCD]
Switch [DVD, TV] to “DVD” and
Press the numbered buttons (0, 1j9) to select an item.
e.g., “5”: [0] ➜ [5]
“15”: [1] ➜ [5]
[DVD-A] [DVD-V]
Press [3, 4, 2, 1] to select an item and press
[ENTER].
≥You may also be able to use the numbered buttons (0, 1j9) to
select an item.
Other buttons used to operate menus
Read the disc’s instructions for further details about operation.
[9][5]: Shows the next menu.
[:][4]: Shows the previous menu.
[RETURN]: Shows the menu screen. [VCD]
[TOP...](http://img.usermanuals.tech/thumb/58/66401/w300_dmr-e60_en_om_d-16.png "Page 17
17
RQT6981
Playing back
[VCD]
Switch [DVD, TV] to “DVD” and
Press the numbered buttons (0, 1j9) to select an item.
e.g., “5”: [0] ➜ [5]
“15”: [1] ➜ [5]
[DVD-A] [DVD-V]
Press [3, 4, 2, 1] to select an item and press
[ENTER].
≥You may also be able to use the numbered buttons (0, 1j9) to
select an item.
Other buttons used to operate menus
Read the disc’s instructions for further details about operation.
[9][5]: Shows the next menu.
[:][4]: Shows the previous menu.
[RETURN]: Shows the menu screen. [VCD]
[TOP...")
17 RQT6981 Playing back [VCD] Switch [DVD, TV] to “DVD” and Press the numbered buttons (0, 1j9) to select an item. e.g., “5”: [0] ➜ [5] “15”: [1] ➜ [5] [DVD-A] [DVD-V] Press [3, 4, 2, 1] to select an item and press [ENTER]. ≥You may also be able to use the numbered buttons (0, 1j9) to select an item. Other buttons used to operate menus Read the disc’s instructions for further details about operation. [9][5]: Shows the next menu. [:][4]: Shows the previous menu. [RETURN]: Shows the menu screen. [VCD] [TOP...
Page 18
![Page 18
18
RQT6981
Playing back
Playing still pictures
[SD/CARD] [RAM]
Only insert or remove the SD/PC card after turning the unit off.
When the card indicator (“SD” or “CARD”) on the unit display is
flashing, the card is being read from or written to. Do not turn off the
power or remove the card. Such action may result in malfunction or
loss of the card’s contents.
∫SD card slot
∫PC card slot
≥It is not possible to open the disc tray while the still pictures screen
is displayed.
1While stopped
Press...](http://img.usermanuals.tech/thumb/58/66401/w300_dmr-e60_en_om_d-17.png "Page 18
18
RQT6981
Playing back
Playing still pictures
[SD/CARD] [RAM]
Only insert or remove the SD/PC card after turning the unit off.
When the card indicator (“SD” or “CARD”) on the unit display is
flashing, the card is being read from or written to. Do not turn off the
power or remove the card. Such action may result in malfunction or
loss of the card’s contents.
∫SD card slot
∫PC card slot
≥It is not possible to open the disc tray while the still pictures screen
is displayed.
1While stopped
Press...")
18 RQT6981 Playing back Playing still pictures [SD/CARD] [RAM] Only insert or remove the SD/PC card after turning the unit off. When the card indicator (“SD” or “CARD”) on the unit display is flashing, the card is being read from or written to. Do not turn off the power or remove the card. Such action may result in malfunction or loss of the card’s contents. ∫SD card slot ∫PC card slot ≥It is not possible to open the disc tray while the still pictures screen is displayed. 1While stopped Press...
Page 19
![Page 19
19
RQT6981
Playing back
To select the next or previous still picture
While in the still picture display, press [2, 1].
[2] : previous still picture [1] : next still picture
≥The still picture changes every time the button is pressed.
To stop still picture display
Press [RETURN].
The still pictures in the folder will be displayed one by one with a
constant interval. The display timing can be altered in units of 1 sec-
ond.
4Press [3, 4] to select “Slide Show”
and press [ENTER].
The still pictures in the...](http://img.usermanuals.tech/thumb/58/66401/w300_dmr-e60_en_om_d-18.png "Page 19
19
RQT6981
Playing back
To select the next or previous still picture
While in the still picture display, press [2, 1].
[2] : previous still picture [1] : next still picture
≥The still picture changes every time the button is pressed.
To stop still picture display
Press [RETURN].
The still pictures in the folder will be displayed one by one with a
constant interval. The display timing can be altered in units of 1 sec-
ond.
4Press [3, 4] to select “Slide Show”
and press [ENTER].
The still pictures in the...")
19 RQT6981 Playing back To select the next or previous still picture While in the still picture display, press [2, 1]. [2] : previous still picture [1] : next still picture ≥The still picture changes every time the button is pressed. To stop still picture display Press [RETURN]. The still pictures in the folder will be displayed one by one with a constant interval. The display timing can be altered in units of 1 sec- ond. 4Press [3, 4] to select “Slide Show” and press [ENTER]. The still pictures in the...
Page 20
![Page 20
20
RQT6981
Playing back
Other methods of play
[RAM] [DVD-R] [DVD-A] [DVD-V] [VCD] [CD] [MP3]
During play or while paused
Press [:] or [9].
≥Press [D] or [E] on the main unit.
≥Each press increases the number of skips.
For your reference
Pressing [:] [D] or [9] [E] while the playback
control feature on Video CDs (➜page 54) is working may take you
to a menu screen.[RAM] [DVD-R] [DVD-A] (Motion picture parts only) [DVD-V] [VCD]
While paused
Press [6] or [5].
Press and hold [D] or [E] on the main unit....](http://img.usermanuals.tech/thumb/58/66401/w300_dmr-e60_en_om_d-19.png "Page 20
20
RQT6981
Playing back
Other methods of play
[RAM] [DVD-R] [DVD-A] [DVD-V] [VCD] [CD] [MP3]
During play or while paused
Press [:] or [9].
≥Press [D] or [E] on the main unit.
≥Each press increases the number of skips.
For your reference
Pressing [:] [D] or [9] [E] while the playback
control feature on Video CDs (➜page 54) is working may take you
to a menu screen.[RAM] [DVD-R] [DVD-A] (Motion picture parts only) [DVD-V] [VCD]
While paused
Press [6] or [5].
Press and hold [D] or [E] on the main unit....")
20 RQT6981 Playing back Other methods of play [RAM] [DVD-R] [DVD-A] [DVD-V] [VCD] [CD] [MP3] During play or while paused Press [:] or [9]. ≥Press [D] or [E] on the main unit. ≥Each press increases the number of skips. For your reference Pressing [:] [D] or [9] [E] while the playback control feature on Video CDs (➜page 54) is working may take you to a menu screen.[RAM] [DVD-R] [DVD-A] (Motion picture parts only) [DVD-V] [VCD] While paused Press [6] or [5]. Press and hold [D] or [E] on the main unit....