Panasonic Dmr E50 Operating Instructions Manual

							31
RQT6920
Editing
Repeat to erase other scenes.
Press [3, 4] to 
select “Exit
” 
and press 
[ENTER].
The new scene is 
inserted before the 
highlighted scene.
Press [3, 4] to select “Next
” and press [ENTER].
(Repeat to add other scenes.)
Repeat to move other scenes.
Press [3, 4, 2, 1] to select the place 
where you want to move the scene to 
and press [ENTER].
The scene is moved and inserted before the 
highlighted scene.
[Note]The play list itself is erased if 
you erase all the scenes in it.
∫ Add
∫ Erase ∫ Re-edit ∫ Move
PLAY LISTRe-edit Scenes
0 : 00 . 05StartEnd
Start
1
EndNextExit Scene No.0 : 02 . 08
RETURN ENTERSELECT
0 : 02 . 08
33
PLAY LIST No.3
01
PLAY LIST
Add Scenes
0 : 00 . 05StartEnd3
Start5
EndNextExit Scene No.0 : 00 . 05
RETURN ENTERSELECT
--:--.--
PLAY01
PLAY LIST No.3 Dinosaur
Press [3, 4, 2, 1] 
to select the place
where you want to 
add the scene and 
press [ENTER].Press [ENTER] 
at the start point 
of the scene.Press [ENTER] 
at the end point 
of the scene.
Press [3, 4, 2, 1] 
to select the scene 
and press [ENTER].
Press [3, 4, 2, 1] 
to select the scene 
and press [ENTER].Press [ENTER] at 
the start point of 
the scene.
PLAYPrev.
[Note]≥ Use [6], [5] and slow-motion (➜ page 18) to find the start and end points.
≥ You cannot specify an end point before a start point. 
≥ You may not be able to specify points within 3 seconds of each other.
≥ Play pauses if the end of the last program is reached during this procedure.
≥ You cannot edit still picture images.
≥ Depending on the state of recording, the actual number of play lists or scenes that 
can be recorded may be less than that specified in this manual.
Erase Scenes
Ye s N o Erase this scene?
RETURN
ENTERSELECT
(maximum of 999 scenes)
Press [3, 4] to select “Prev.
” o r  “Next” and press 
[ENTER]. (Repeat to re-edit other scenes.)
Press [3, 4] to 
select “Exit
” 
and press 
[ENTER].
The re-edited 
scene replaces the 
old one.
Press [ENTER] 
at the end point 
of the scene.
Press [2] to select 
“Yes
” and press 
[ENTER].
The selected scene is 
erased from the play 
list.
Press [3, 4, 
2, 1] to select
the scene and
press [ENTER].Once a scene has been 
erased, it is irretrievable. 
Check carefully before 
proceeding. 
						

							32
RQT6920
Editing
Editing programs
Erase Program
0 : 58 SP
Erase CancelEraseENTER SELECT : 9
Corresponding PLAY LIST will also be erased.Remaining Recording Time
RETURN
ENTERSELECT
Protection
Ye sNo
Set up Program Protection.
RETURN
ENTERSELECT
Shorten
     Segment
– : – – . – –Start– : – – . – –End
StartEndNextExit
0 : 00 . 01
PLAY03
RETURN ENTERSELECT
N
S
Divide
     Program
– : – – . – –Divide
PreviewDivide
Exit
0 : 00 . 01
PLAY03
RETURN ENTERSELECT
N
S
Properties
No.
Date
CH1
6/20/ 2001 TUE
4On 1:02 PM
ENTER
Dinosaur
Time 0:01(SP)
RETURN
DIRECT NAVIGATOR
No DATECH TIME EDITTITLE
  9 : 00 PMAuto action026/20 WED63
3
1
1
1
1
1
11 : 00 PMUSJ036/20 WED13
ENTERRETURN0   ~   9No TOTAL 3SELECT
016/20 WED410 : 00 AMDinosaur
The program, and play lists 
created from it, are erased 
irretrievably when you use this 
procedure. Check carefully before 
proceeding.
Erase Program
Enter Title
Properties
[RAM]
If set, this will protect the program 
from accidental erasure.
Shorten Segment Operation
Press 
[DIRECT NAVIGATOR].
Press [3, 4] to select 
the program.
≥ You can also select programs
by entering a 2-digit number 
with the numbered buttons.
e.g., “5”:  [0] ➜ [5]  
Press [1] so the 
submenu appears.
Press [3, 4] to select 
the item and press 
[ENTER].
To clear the program list
Press [DIRECT NAVIGATOR].
To stop set up processPress [RETURN].
For your reference
You can only access “Properties” if 
the disc is write-protected. Release 
protection
 (cartridge ➜ page 11, disc ➜ page 34) to access other items. 
[RAM][RAM] [DVD-R]
[RAM] [DVD-R]
Program information (e.g., time and 
date) is shown.
Protection
The program segment, and play 
list scenes created from it, are 
erased irretrievably when you use 
this procedure. Check carefully 
before proceeding.
[RAM]
Divide Program
[RAM]
Select a point at which to divide the 
program into two.
Entering text ➜ page 27
You must be sure you wish to 
divide a program because once a 
program has been divided,
it cannot be returned to its 
original form. [RAM] [DVD-R]
ENTER
_Enter Title
1 1
2
3
4
5
6
7
8
9
0
1002345
ABC a
DE F d
GH I
NOg
JKL j
M
m
67890
bcij
ef /l%
hifl$¢
&
klON@
n]_o[
SPACE
SETERASE
SELECT
0100PQRS p
TUV t
WX Y Z wqrs ( )
uv { }-
xyz
`^| 
! ?\
.
,

:
; ––
RETURN
π;
STOPPAUSEPLAY/a1.3
CH
VOLUME
123
789
0
10 0
4
56
SLOW/SEARCHSKIP
DIRECT NAVIGATOR
TOP
MENUMENU
RETURNFUNCTIONS
ENTER
PLAY LIST
CANCEL
Numbered 
buttons
DIRECT
NAVIGATOR
RETURN 3, 4, 2, 1
ENTER
6, 5 
						

							33
RQT6920
Editing
[Note]≥ The disc’s available recording time may not increase after 
   erasing short programs.
≥ Computer data cannot be erased.
≥ The available recording time on DVD-R does not increase when 
    you erase programs.
The lock symbol 
appears when the 
program is write-
protected.
Press [2] to set 
protection and press 
[ENTER].
[Note]≥ Use [6], [5] and slow-motion (➜ page 18) to find the start and end points. 
≥ Play pauses if the end of the program is reached during this procedure.
≥ You may not be able to specify points within 3 seconds of each other.
≥ You cannot specify an end point before a start point. 
≥ You cannot specify points on still pictures in the program.
≥ The disc’s available recording time may not increase after erasing short segments.Repeat to enter other sections.
Press [3, 4] to 
select “Exit
” and 
press [ENTER]. 
Press [2] to 
select “Erase
” 
and press 
[ENTER]. 
Press [3, 4] to select “Next” and press [ENTER], then press [2] to 
select “Erase” and press [ENTER].
Press [2] to select 
“Divide
” and press 
[ENTER].
The program is divided.
0:19  SP Remaining Recording Time
Shorten Segment
Corresponding PLAY LIST will also be erased.
Erase Cancel
RETURN
ENTERSELECT
DIRECT NAVIGATOR
No DATECH TIME EDITTITLE014
02 6
03
133
3
1
1
1
1
1
ENTER0   ~   9No TOTAL 3SELECTRETURN
Shorten
     Segment
0 : 00 . 01Start– : – – . – –End3
StartEndNextExit
0 : 00 . 01
PLAY03
RETURN ENTERSELECT
N
S
0 : 00 . 01StartEnd3
StartEndNextExit
0 : 10 . 15
RETURN ENTERSELECT
0 : 10 . 15
N
SShorten
     Segment03
3
Divide Program
Divide Cancel
RETURN
ENTERSELECT
Press [2] to 
select “Erase
” and 
press [ENTER].
The program is erased.
Press [ENTER] at 
the end point of the 
section you want to 
erase.
Press [3, 4] to 
select “Exit
” 
and press 
[ENTER].
Once you divide the program,  
it will not be restored to the original.
[Note]≥ The divided programs retain the title and CPRM property (➜ page 
50) of the original program.
≥ 
A minute portion of the recording directly preceding the division
point may be lost.
≥ It is not possible to carry out Divide Program in the following cases:
   –when the program is extremely short.
   –when the total number of programs is more than 99.
To confirm the division pointPress [3, 4] to select “Preview” and press [ENTER]. (Play will 
begin from a point 10 seconds prior to and after the division 
point.)
To change the division pointPress [3, 4] to select “Divide” and press [ENTER] at the point 
you want to change.
  9 : 00 PMAuto action6/20 WED
11 : 00 PMUSJ6/20 WED6/20 WED 10 : 00 AM
Dinosaur
Press [ENTER] at 
the point you want 
to divide the 
program.
Press 
[ENTER] at 
the start point 
of the section 
you want to 
erase. 
						

							34
RQT6920
Editing
Disc setting
[RAM] [DVD-R]
Enter Title
[RAM]
If set, this will protect the disc from 
accidental erasure.
Disc Protection
Format
Finalize
[DVD-R](DVD-R recorded on this unit only)
You can play DVD-R on compatible 
DVD players by finalizing them on 
this unit, effectively making them into 
DVD-Video.
For your reference
The markers you entered (➜ page 
20) will be lost.
Prog #
Disc Protection
DISC SETTING
Enter Title
Off
FormatRETURNENTERSELECT
7
Used Total MarkFree
10 0 : 580 : 42 (SP)
DISC SETTING
Disc Protection
Set up Disc Protection.
Ye s N o
Format disc
Formatting the disc will erase all contents.
This will take approximately 1 minute.
Is it OK to start formatting the disc?
Ye s N o
Finalize
This will take approximately 10 minutes.
Is it OK to start finalizing the disc?
Ye s N o
Operation
To stop set up process
Press [RETURN].
Erase all programs
Erase all programs
All programs and PLAY LISTs will 
be erased.
Is it OK to start erasing all programs?
Ye s N o
Entering text ➜ page 27
Press [3, 4, 2, 1] to 
select “DISC  SETTING”
and press [ENTER].
Press [3, 4] to select 
the item and press 
[ENTER].
Erase all programs[RAM]
All programs and play lists created 
from them will be erased 
irretrievably 
when you use this 
procedure. Check carefully 
before proceeding.
Preparation
Release protection (cartridge ➜ page 11, program ➜ page 32, disc ➜ page 34) before proceeding.
[RAM]Some DVD-RAM are unformatted. 
Format them before using them in 
this unit. Formatting also allows you 
to erase the entire contents of a disc.
ENTER
_Enter Title
1 1
2
3
4
5
6
7
8
9
0
1002345
ABC a
DE F d
GH I
NOg
JKL j
M
m
67890
bcij
ef /l%
hifl$¢
&
klON@
n]_o[
SPACE
SETERASE
SELECT
0100PQRS p
TUV t
WX Y Z wqrs ( )
uv { }-
xyz
`^| 
! ?\
.
,

:
; ––
RETURN
π;
Preparation≥ Release protection (cartridge ➜page 11) before proceeding.≥ If the disc is dirty, clean it with the
recommended cleaner (➜  
page 50) before formatting.
While stopped
Press [FUNCTIONS].
e.g., DVD-RAM
STOPPAUSEPLAY/a1.3
CH
VOLUME
123
789
0
10 0
4
56
SLOW/SEARCHSKIP
DIRECT NAVIGATOR
TOP
MENUMENU
RETURNFUNCTIONS
ENTER
PLAY LIST
CANCEL
Formatting erases all 
contents on the disc, 
including computer data. 
Check carefully before 
proceeding.
FUNCTIONS
RETURN 3, 4, 2, 1
ENTER 
						

							35
RQT6920
Editing
The lock symbol appears
closed when the disc is
write-protected.
Press [2] to set disc 
protection and press 
[ENTER]. 
[Note]
Computer data cannot be erased.Press [2] to select 
“Start
” and press 
[ENTER].
DISC SETTING
RETURNENTERSELECT
Prog # 7
Used Total MarkFree
10 0 : 580 : 42 (SP)
Disc ProtectionEnter Title
On
FormatErase all programs
[Note]
≥ Do not turn the unit off or disconnect the AC power
supply cord while the message “Finalizing the disc” is
on the television. This will render the disc unusable.
≥ Finalizing takes up to 15 minutes.
After finalizing..≥ You cannot record or perform editing such as giving titles
and erasing programs.
≥ Programs longer than 5 minutes are divided into about 
five-minute chapters.
≥ These DVD-R can be played on other Panasonic DVD 
players, but this is not guaranteed. Play may not be possible 
due to the player you are using, the DVD-R, or the condition 
of the recording. Play the disc using this unit if you
  experience problems with other equipment.
  Visit Panasonic’s homepage for more information about 
DV D s . http://www.panasonic.com/playDVD-R 
[Note]
≥ Do not turn the unit off or disconnect the AC power
supply cord while the message “Formatting the disc” is 
on the television. This can render the disc unusable.
≥ Formatting takes up to a maximum of 70 minutes.
≥ The contents on the disc are erased when you format it even
if you have set program or disc protection.
≥ It may not be possible to use a disc on this unit if you cannot
format it.
≥ Formatting cannot be performed on DVD-R or CD-R/RW.
To stop formattingPress [RETURN].
You can cancel formatting if it takes more than 2 minutes. The 
disc must be reformatted if you do this.
Press
[ENTER]
to complete
the procedure.Press [2]
to select
“Yes
” and
press 
[ENTER].
Press
[ENTER]
to complete
the procedure.Press [2]
to select
“Yes
” and
press 
[ENTER].Press [2] to
select “Start
” and
press [ENTER].
Formatting starts.
≥ A message appears when 
formatting is finished.
Press [2] to
select “Start
” and
press [ENTER].
Finalizing starts.
≥ A message appears when 
finalizing is finished.
Press [2] to 
select “Yes
” and 
press [ENTER].All programs 
and play lists 
are erased. 
						

							36
RQT6920
Advanced operation
Using on-screen menus
1Press [DISPLAY].
e.g., DVD-RAM
2Press [3, 4] to select the menu and
press [1].
3Press [3, 4] to select the item and
press [1].
4Press [3, 4] to select the setting.
To clear the on-screen menus
Press [DISPLAY].
For your reference
≥The screens depend on the disc contents.
≥Depending on the condition of the unit (playing, stopped, etc.) and
disc contents, there are some items that you cannot select or
change.Not available when playing CDs and MP3 discs.
e.g., DVD-RAM
[A]Soundtrack/Subtitle language
[B]Audio attributes
LPCM/ÎDigital/DTS/MPEG: Signal type
k (kHz):Sampling frequency
b (bit):Number of bits
ch (channel):Number of channels
 
.1: Subwoofer signal (not displayed if there
is no subwoofer signal)
0: No surround
1: Mono surround
2: Stereo surround (left/right)
 
1: Center
2: Front leftiFront right
3: Front leftiFront rightiCenter
For your reference
≥When playing back recordings of SAP broadcasts, “1+1 ch” will be
displayed.
≥You can only select subtitles, soundtracks, and angles if they are
recorded on the disc.
≥Some discs allow changes to soundtracks, subtitles, and angles
only by using the disc’s menus.
≥If the subtitles overlap closed captions recorded on discs, turn the
subtitles off.
Common procedures
OPEN/CLOSE
SETUP
ERASE
F RecPOSITION MEMORYMARKER
AUDIOINPUT SELECT
CM SKIP
STATUSFRAME
DISPLAY
STOPPAUSEPLAY/a1.3
DV D
VCR Plus+ TV/VIDEOREC MODEREC
CH
VOLUME
TVTVDV D
123
789
0
10 0
4
56
SLOW/SEARCHSKIP
DIRECT NAVIGATOR
TOP
MENUMENU
RETURNFUNCTIONSPROG/CHECKTIME SLIPADD/DLT
ENTER
PLAY LIST
CANCEL
POWER
ÍÍ
DISPLAY
3, 4, 2, 1
ENTER Numbered
buttons
Disc
Video
Audio
PlaySound track
Subtitle1
Audio channel
OFF
L R
Î Digital   2/0 ch
Menu Item Setting
Disc menu
Item Content
Sound track Soundtrack language [DVD-V] 
See [A] below.
Audio attribute [RAM] [DVD-R] [DVD-V] 
See [B] below.
Karaoke vocals, on and off
(Karaoke [DVD-V] only)
Solo: ON()OFF
Duet: OFF()V1+V2()V1()V2
^=======J
Subtitle Subtitle language [DVD-V] 
See [A] below.
Subtitle on/off [RAM] [DVD-R] [DVD-V] 
Angle Angle number [DVD-V]
Audio channel [RAM] [VCD] (➜page 23)
PBC Playback control on/off [VCD]
Indicates whether menu play (playback con-
trol) is on or off.
ENG: English
FRA: French
DEU: German
ITA: Italian
ESP: Spanish
NLD: DutchSVE: Swedish
NOR: Norwegian
DAN: Danish
POR: Portuguese
RUS: Russian
JPN: JapaneseCHI: Chinese
KOR: Korean
MAL: Malay
VIE: Vietnamese
THA: Thai
¢: Others
Disc
Video
Audio
PlaySound track
Subtitle1
Audio channel
OFF
L R Î Digital   2/0 ch
e.g., 3/2 .1ch 
						

							37
RQT6920
Advanced operation
e.g., DVD-RAM
Not available when playing Video CDs, CDs and MP3 discs.
e.g., DVD-Video
Play menu
Disc
Video
Audio
PlayRepeat play
MarkerOFF
 
† † † † † † † † † †1s10
Item Content Remarks
Repeat playEach time you press [3, 4]:
[RAM] [DVD-R] [DVD-V]
PRG: Program Chapter
All Title
PL: Play list ([RAM])OFF
OFF
[VCD] [CD] [MP3]
Tr a c k Tr a c k
All Group
OFF OFF
To cancel: Select “OFF”.≥You cannot use repeat play to repeat an entire DVD-Video.
≥Repeat play does not work if the disc’s elapsed play time is
not shown on the unit’s display.
≥[ERASE] does not work while in repeat play mode.
If the Video CD has playback control
1While stopped (the screen saver is
on the television), press the num-
bered buttons to select a track
(➜page 18).
2Select the repeat mode.
Marker[RAM] [DVD-R] [DVD-V] [VCD] [CD] [MP3]
(➜page 20)—
Audio menu
Disc
Video
Audio
PlayV. S. S.
Dialog EnhancerOFF
OFF
Item Content Remarks
V.S.S.[RAM] [DVD-R] [DVD-V]
(Only with Dolby Digital with 2 or more channels)
Enjoy a surround-like effect if you are using two front 
speakers only. The effect is broadened and sound 
seems to come from virtual speakers on either side if 
the disc has surround signals recorded on it.
Natural ()Emphasis()OFF
^=======J
≥Turn off the surround effects on the other equipment.
≥V.S.S. will not work, or will have less effect, with some discs.
≥Turn V.S.S. off if it causes distortion.
Dialog 
Enhancer[DVD-V]
(Dolby Digital, 3-channel or over only, including a cen-
ter channel)
The volume of the center channel is raised to make 
dialog easier to hear.
ON()OFF— 
						

							Advanced operation
38
RQT6920
Using on-screen menus
Not available when playing CDs and MP3 discs.
[RAM] [DVD-R] [DVD-V] [VCD]
∫When you have set “TV Type” to “Aspect 4:3 &
480P” or “Aspect 16:9 & 480P” in SETUP
(
➜page 10)
Video menu
Item Content
Picture Normal:Default setting
Soft: Soft picture with fewer video arti-
facts
Fine:  Details are sharper
Cinema:Mellows movies, enhances detail in 
dark scenes.
MPEG-DNRYou can turn the recommended settings for 
3D NR, block NR, and mosquito NR on and 
off.
ON()OFF
3D NR: Reduces overall noise
Block NR: Smoothes block noise
Mosquito NR: Reduces the smudging that 
appears around contrasting 
sections of the picture
Item Content
Progressive ON:Enables progressive output
OFF:Disables progressive output
Transfer
(When progres-
sive output is on)Select the method of conversion for progres-
sive output to suit the type of material being 
played (➜page 50, Film and video).
Auto1 (normal): For film material
Auto2:For film material (the same as 
Auto1, but able to convert 30-frame-
per-second progressive video.)
Video:For video material
Disc
Video
Audio
PlayPicture
MPEG-DNRNormal
ON
Disc
Video
Audio
PlayPicture
MPEG-DNRNormal
ON
ProgressiveAuto 1ONTransfer 
						

							39
RQT6920
Advanced operation
On-screen displays
Displays appear on the television when you operate the unit to let
you know what operation was performed and what condition the unit
is in.
≥You can change the setting in the SETUP menu so the first display
does not appear automatically (➜page 47, Display—Status Mes-
sages).
Press [STATUS].
The display changes each time you press the button.
e.g., DVD-RAM
OPEN/CLOSE
SETUP
ERASE
F RecPOSITION MEMORYMARKER
AUDIOINPUT SELECT
CM SKIP
STATUSFRAME
DISPLAY
STOPPAUSEPLAY/a1.3
DV D
VCR Plus+ TV/VIDEOREC MODEREC
CH
VOLUME
TVTVDV D
123
789
0
10 0
4
56
SLOW/SEARCHSKIP
DIRECT NAVIGATOR
TOP
MENUMENU
RETURNFUNCTIONSPROG/CHECKTIME SLIPADD/DLT
ENTER
PLAY LIST
CANCEL
POWER
ÍÍ
STATUS
Changing the information displayed
0:50  XP 6/8 10:15 PM
π PRG2  0:05.14  XP
π PRG1  0:00.10  SP
REC
LR
DVD-RAM
REC
LR
DVD-RAM
0 . . . . 5 . . . . 10 Bit RateREC 5.4Mbps  XP
π PLAY 3.1Mbps  SPREC
LR
DVD-RAM
No display
π
PLAY
PLAY
PLAY Remain     π
Display examples
REC
LR
DVD-RAMa
bc
PLAY
cCurrent recording or play status/input channel
and caption (if entered)
REC: Recording
PAU S E: Recording paused
PLAY:Playing;: Playing paused
6:Rewinding5: Fast forwarding
E: Reverse slow-motionD: Slow-motion aDisc indication
bAudio type (➜page 23)
Shows the selected audio type.
≥During reception
Stereo: Stereo is selected
Mono: Monaural is selected
SAP: Secondary audio program is 
selected
(“((” appears when the type you have
selected is actually being received.)
≥During play
LR, R, L: a stereo program is recorded
MAIN, SAP: an SAP program is recorded e.g., DVD-RAM
0:50  XP 6/8 10:15 PM
π PRG2  0:05.14  XP
π PRG1  0:00.10  SPd
e
fg
i
hRemain    
π
1:35 6/9 10:15 PM
Group: RootsMusicTrack: 008 Holy.mp3
d
l
mπ G1         T8
Total        T8/18
jk
e.g., DVD-RAM
e.g., MP3jSelected group and track name
kSelected group and track number
lSelected track no./Total track no. 
in all groups
mElapsed play time of a track play-
ing dThe current date and time
eElapsed recording time/recording 
mode
fElapsed play time of a program play-
ing/mode at the time of recording
gAvailable recording time and 
recording mode
hApproximate volume of recording
iPlay position in the volume of 
recording
0 . . . . 5 . . . . 10 Bit RateREC 5.4Mbps  XP
π PLAY 3.1Mbps  SPπo
p
n
q
nRecording mode 
or I/P/B display when paused
(➜page 50)
oVideo bit-rate when recordingpVideo bit-rate when playing
qBit-rate display§
Show as Mbps (Megabits per
seconds) during play and
recording, or kbit (kilobits)
while paused.
§The method of calculating bit-rate for recording and playing is differ-
ent so there may be differences in the figures displayed. (Values are
approximate.) e.g., DVD-RAM 
						

							40
RQT6920
Advanced operation
Home Theater
Refer to the relevant pages for details.
Other usesRecord to digital recording equipment or cassette deck (➜page 42)
Record from a video cassette recorder (➜page 15)
Enjoying CATV/Satellite broadcasts
What you want to doHow to do itReference
pagesSettingsReference
pages
Enjoying CATV/Sat-
ellite broadcastsConnect a cable TV box or 
satellite receiver.41Tune to channels correctly. 9
Change the necessary 
settings on the equipment you 
have connected.—
Enjoying more powerful sound
Enjoying 5.1-
channel surround 
sound with Dolby 
Digital and DTS
Digital connection
Connect to an amplifier with 
built-in decoders.42
[A]SETUP—Audio—
Digital Audio Output
≥Set PCM Down Conversion
to suit the equipment.
≥Set Dolby Digital and DTS to
suit the equipment.47
Change speaker settings on 
the amplifier.—
Enjoying stereo or 
Dolby Pro LogicAnalog connection
Connect to an analog 
amplifier or system 
component.42
[B]SETUP—Audio—
Digital Audio Output
≥Set PCM Down Conversion
to Off.47
Digital connection
Connect to a digital 
amplifier or system compo-
nent.42
[A]SETUP—Audio—
Digital Audio Output
≥Set PCM Down Conversion
to suit the equipment.
≥Set Dolby Digital to PCM.
≥Set DTS to Off.47
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are trademarks of
Dolby Laboratories.
“DTS”, “DTS Digital Surround” and “DTS Digital Out” are regis-
tered trademarks of Digital Theater Systems, Inc.