Panasonic Dmr E100 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Dmr E100 Operating Instructions Manual. The Panasonic manuals for DVD Recorder are available online for free. You can easily download all the documents as PDF.
Page 21
![Page 21
21
RQT6986
Playing back
[HDD] [RAM] [DVD-R]
Play restarts from approximately a minute later. Convenient when
you want to skip commercials etc.
During play
Press [CM SKIP].
[Note]
If the start of the next program is within one minute of the point you
skipped from, play restarts from the beginning of that program.
[HDD] [RAM] [DVD-R]
1During play
Press [TIME SLIP].
2Within 5 seconds
Press [3, 4] to enter the time and
then press [ENTER].
Press to alter in one-minute units. Press and hold to alter in...](http://img.usermanuals.tech/thumb/58/66394/w300_dmr-e100_en_om_d-20.png "Page 21
21
RQT6986
Playing back
[HDD] [RAM] [DVD-R]
Play restarts from approximately a minute later. Convenient when
you want to skip commercials etc.
During play
Press [CM SKIP].
[Note]
If the start of the next program is within one minute of the point you
skipped from, play restarts from the beginning of that program.
[HDD] [RAM] [DVD-R]
1During play
Press [TIME SLIP].
2Within 5 seconds
Press [3, 4] to enter the time and
then press [ENTER].
Press to alter in one-minute units. Press and hold to alter in...")
21 RQT6986 Playing back [HDD] [RAM] [DVD-R] Play restarts from approximately a minute later. Convenient when you want to skip commercials etc. During play Press [CM SKIP]. [Note] If the start of the next program is within one minute of the point you skipped from, play restarts from the beginning of that program. [HDD] [RAM] [DVD-R] 1During play Press [TIME SLIP]. 2Within 5 seconds Press [3, 4] to enter the time and then press [ENTER]. Press to alter in one-minute units. Press and hold to alter in...
Page 22
![Page 22
22
RQT6986
Playing back
Playing still pictures and SD VIDEO (MPEG4) programs
[HDD] [RAM] [SD] [CARD]
Only insert or remove the SD/PC card after turning the unit off.
When the card indicator (“SD” or “CARD”) on the unit display is
flashing, the card is being read from or written to. Do not turn off the
power or remove the card. Such action may result in malfunction or
loss of the card’s contents.
∫SD card slot
∫PC card slot
≥It is not possible to open the disc tray while the still pictures/SD
VIDEO...](http://img.usermanuals.tech/thumb/58/66394/w300_dmr-e100_en_om_d-21.png "Page 22
22
RQT6986
Playing back
Playing still pictures and SD VIDEO (MPEG4) programs
[HDD] [RAM] [SD] [CARD]
Only insert or remove the SD/PC card after turning the unit off.
When the card indicator (“SD” or “CARD”) on the unit display is
flashing, the card is being read from or written to. Do not turn off the
power or remove the card. Such action may result in malfunction or
loss of the card’s contents.
∫SD card slot
∫PC card slot
≥It is not possible to open the disc tray while the still pictures/SD
VIDEO...")
22 RQT6986 Playing back Playing still pictures and SD VIDEO (MPEG4) programs [HDD] [RAM] [SD] [CARD] Only insert or remove the SD/PC card after turning the unit off. When the card indicator (“SD” or “CARD”) on the unit display is flashing, the card is being read from or written to. Do not turn off the power or remove the card. Such action may result in malfunction or loss of the card’s contents. ∫SD card slot ∫PC card slot ≥It is not possible to open the disc tray while the still pictures/SD VIDEO...
Page 23
![Page 23
23
RQT6986
Playing back
To display still pictures one by one
Press [3, 4, 2, 1] to select a still picture and then [ENTER].
To select the next or previous still picture
While in the still picture display, press [2, 1].
[2] : previous still picture [1] : next still picture
≥The still picture changes every time the button is pressed.
To return to the previous screen
Press [RETURN].
5Press [3, 4] to select “Slide Show”
and press [ENTER].
The still pictures in the folder appear in numerical order.
To...](http://img.usermanuals.tech/thumb/58/66394/w300_dmr-e100_en_om_d-22.png "Page 23
23
RQT6986
Playing back
To display still pictures one by one
Press [3, 4, 2, 1] to select a still picture and then [ENTER].
To select the next or previous still picture
While in the still picture display, press [2, 1].
[2] : previous still picture [1] : next still picture
≥The still picture changes every time the button is pressed.
To return to the previous screen
Press [RETURN].
5Press [3, 4] to select “Slide Show”
and press [ENTER].
The still pictures in the folder appear in numerical order.
To...")
23 RQT6986 Playing back To display still pictures one by one Press [3, 4, 2, 1] to select a still picture and then [ENTER]. To select the next or previous still picture While in the still picture display, press [2, 1]. [2] : previous still picture [1] : next still picture ≥The still picture changes every time the button is pressed. To return to the previous screen Press [RETURN]. 5Press [3, 4] to select “Slide Show” and press [ENTER]. The still pictures in the folder appear in numerical order. To...
Page 24
![Page 24
24
RQT6986
Playing back
Using menus to play MP3 discs
[MP3]
This unit can play MP3 files recorded on CD-R/RW with a computer.
Files are treated as tracks and folders are treated as groups.
1Press [TOP MENU].
2Press [3, 4] to select the track and
press [ENTER].
Play continues to the last track in the last group.
≥“0” indicates the track currently playing.
≥To select with the numbered buttons:
e.g., “5”: [0] ➜ [0] ➜ [5]
“15”: [0] ➜ [1] ➜ [5]
To show other pages
Press [3, 4, 2, 1] to select “Prev.” or...](http://img.usermanuals.tech/thumb/58/66394/w300_dmr-e100_en_om_d-23.png "Page 24
24
RQT6986
Playing back
Using menus to play MP3 discs
[MP3]
This unit can play MP3 files recorded on CD-R/RW with a computer.
Files are treated as tracks and folders are treated as groups.
1Press [TOP MENU].
2Press [3, 4] to select the track and
press [ENTER].
Play continues to the last track in the last group.
≥“0” indicates the track currently playing.
≥To select with the numbered buttons:
e.g., “5”: [0] ➜ [0] ➜ [5]
“15”: [0] ➜ [1] ➜ [5]
To show other pages
Press [3, 4, 2, 1] to select “Prev.” or...")
24 RQT6986 Playing back Using menus to play MP3 discs [MP3] This unit can play MP3 files recorded on CD-R/RW with a computer. Files are treated as tracks and folders are treated as groups. 1Press [TOP MENU]. 2Press [3, 4] to select the track and press [ENTER]. Play continues to the last track in the last group. ≥“0” indicates the track currently playing. ≥To select with the numbered buttons: e.g., “5”: [0] ➜ [0] ➜ [5] “15”: [0] ➜ [1] ➜ [5] To show other pages Press [3, 4, 2, 1] to select “Prev.” or...
Page 25
![Page 25
25
RQT6986
Playing back
Changing audio
[HDD] [RAM] [DVD-A] [DVD-V] [VCD]
You can change the audio being received or played.
Press [AUDIO].
How the type changes depends on when you press the button.
∫While receiving MTS audio (Multi-channel Tele-
vision Sound Stereo)
[.Stereo:Main audio (stereo)
lv
lSAP:Secondary audio program (SAP)
lv
a-Mono:Main audio (monaural)
≥If the broadcast is “MonoiSAP”, audio will be monaural even if
you select Stereo mode.
≥Select “Mono” if reception is poor during a stereo...](http://img.usermanuals.tech/thumb/58/66394/w300_dmr-e100_en_om_d-24.png "Page 25
25
RQT6986
Playing back
Changing audio
[HDD] [RAM] [DVD-A] [DVD-V] [VCD]
You can change the audio being received or played.
Press [AUDIO].
How the type changes depends on when you press the button.
∫While receiving MTS audio (Multi-channel Tele-
vision Sound Stereo)
[.Stereo:Main audio (stereo)
lv
lSAP:Secondary audio program (SAP)
lv
a-Mono:Main audio (monaural)
≥If the broadcast is “MonoiSAP”, audio will be monaural even if
you select Stereo mode.
≥Select “Mono” if reception is poor during a stereo...")
25 RQT6986 Playing back Changing audio [HDD] [RAM] [DVD-A] [DVD-V] [VCD] You can change the audio being received or played. Press [AUDIO]. How the type changes depends on when you press the button. ∫While receiving MTS audio (Multi-channel Tele- vision Sound Stereo) [.Stereo:Main audio (stereo) lv lSAP:Secondary audio program (SAP) lv a-Mono:Main audio (monaural) ≥If the broadcast is “MonoiSAP”, audio will be monaural even if you select Stereo mode. ≥Select “Mono” if reception is poor during a stereo...
Page 26
![Page 26
26
RQT6986
Timer recording
Timer recording
[HDD] [RAM] [DVD-R]
This is a simple way of specifying a time to stop recording when you
are in a hurry or before you go to bed.
During recording
Press [¥, REC] to select the recording time.
Each time you press the button:
0:30 "# 1:00 "# 1:30 "# 2:00 "# 3:00
^"" Counter (cancel) !" 4:00 ,""}
To show the remaining time
Press [STATUS].
For your reference
≥This does not work with timer recordings or Flexible Recording
(➜page...](http://img.usermanuals.tech/thumb/58/66394/w300_dmr-e100_en_om_d-25.png "Page 26
26
RQT6986
Timer recording
Timer recording
[HDD] [RAM] [DVD-R]
This is a simple way of specifying a time to stop recording when you
are in a hurry or before you go to bed.
During recording
Press [¥, REC] to select the recording time.
Each time you press the button:
0:30 \"# 1:00 \"# 1:30 \"# 2:00 \"# 3:00
^\"\" Counter (cancel) !\" 4:00 ,\"\"}
To show the remaining time
Press [STATUS].
For your reference
≥This does not work with timer recordings or Flexible Recording
(➜page...")
26 RQT6986 Timer recording Timer recording [HDD] [RAM] [DVD-R] This is a simple way of specifying a time to stop recording when you are in a hurry or before you go to bed. During recording Press [¥, REC] to select the recording time. Each time you press the button: 0:30 "# 1:00 "# 1:30 "# 2:00 "# 3:00 ^"" Counter (cancel) !" 4:00 ,""} To show the remaining time Press [STATUS]. For your reference ≥This does not work with timer recordings or Flexible Recording (➜page...
Page 27
![Page 27
27
RQT6986
Timer recording
You can enter up to 32 programs up to a month in advance.
Each daily or weekly program is counted as one program.
1Press [PROG/CHECK].
2Press [3, 4 ] to select “New Timer
Program” and press [ENTER].
3Press [ 1] to move through the items
and change the items with [ 3, 4 ].
≥The current settings are shown each time you press [ 1].
≥ You may use the numbered buttons to enter the CHANNEL,
DATE, ON (start Time), and OFF (Finish Time).
≥ CHANNEL (Channel number and caption)
≥ DATE...](http://img.usermanuals.tech/thumb/58/66394/w300_dmr-e100_en_om_d-26.png "Page 27
27
RQT6986
Timer recording
You can enter up to 32 programs up to a month in advance.
Each daily or weekly program is counted as one program.
1Press [PROG/CHECK].
2Press [3, 4 ] to select “New Timer
Program” and press [ENTER].
3Press [ 1] to move through the items
and change the items with [ 3, 4 ].
≥The current settings are shown each time you press [ 1].
≥ You may use the numbered buttons to enter the CHANNEL,
DATE, ON (start Time), and OFF (Finish Time).
≥ CHANNEL (Channel number and caption)
≥ DATE...")
27 RQT6986 Timer recording You can enter up to 32 programs up to a month in advance. Each daily or weekly program is counted as one program. 1Press [PROG/CHECK]. 2Press [3, 4 ] to select “New Timer Program” and press [ENTER]. 3Press [ 1] to move through the items and change the items with [ 3, 4 ]. ≥The current settings are shown each time you press [ 1]. ≥ You may use the numbered buttons to enter the CHANNEL, DATE, ON (start Time), and OFF (Finish Time). ≥ CHANNEL (Channel number and caption) ≥ DATE...
Page 28
![Page 28
28
RQT6986
Timer recording
Timer recording
[HDD]
If you record a program onto HDD repeatedly everyday or every
week using timer recording, the unit will record the new program
over the old one.
1While the timer recording list (➜page 27, step 4) is displayed
Press [3, 4] to select the program
and then [ENTER].
2Press [2, 1] to select
“RENEW”.
3Press [3, 4] to select “ON” and then
[ENTER].
The timer recording list reappears.
[Note]
≥If a program set for Auto Renewal Recording is protected, the program...](http://img.usermanuals.tech/thumb/58/66394/w300_dmr-e100_en_om_d-27.png "Page 28
28
RQT6986
Timer recording
Timer recording
[HDD]
If you record a program onto HDD repeatedly everyday or every
week using timer recording, the unit will record the new program
over the old one.
1While the timer recording list (➜page 27, step 4) is displayed
Press [3, 4] to select the program
and then [ENTER].
2Press [2, 1] to select
“RENEW”.
3Press [3, 4] to select “ON” and then
[ENTER].
The timer recording list reappears.
[Note]
≥If a program set for Auto Renewal Recording is protected, the program...")
28 RQT6986 Timer recording Timer recording [HDD] If you record a program onto HDD repeatedly everyday or every week using timer recording, the unit will record the new program over the old one. 1While the timer recording list (➜page 27, step 4) is displayed Press [3, 4] to select the program and then [ENTER]. 2Press [2, 1] to select “RENEW”. 3Press [3, 4] to select “ON” and then [ENTER]. The timer recording list reappears. [Note] ≥If a program set for Auto Renewal Recording is protected, the program...
Page 29
![Page 29
29
RQT6986
Timer recording
[HDD] [RAM] [DVD-R]
1Press [PROG/CHECK].
The timer recording list appears.
2Press [3, 4] to select the program.
≥To select with the numbered buttons:
e.g., “5”: [0] ➜ [5]
“15”: [1] ➜ [5]
≥Press [2, 1] to skip down several programs on the list.
3Press [CANCEL] or [ADD/DLT] to
delete,
You cannot delete programs that are currently recording.
or press [ENTER] to change.
The timer recording setting screen appears.
4If you pressed [ENTER] in step 3,
Move through the items with [2,...](http://img.usermanuals.tech/thumb/58/66394/w300_dmr-e100_en_om_d-28.png "Page 29
29
RQT6986
Timer recording
[HDD] [RAM] [DVD-R]
1Press [PROG/CHECK].
The timer recording list appears.
2Press [3, 4] to select the program.
≥To select with the numbered buttons:
e.g., “5”: [0] ➜ [5]
“15”: [1] ➜ [5]
≥Press [2, 1] to skip down several programs on the list.
3Press [CANCEL] or [ADD/DLT] to
delete,
You cannot delete programs that are currently recording.
or press [ENTER] to change.
The timer recording setting screen appears.
4If you pressed [ENTER] in step 3,
Move through the items with [2,...")
29 RQT6986 Timer recording [HDD] [RAM] [DVD-R] 1Press [PROG/CHECK]. The timer recording list appears. 2Press [3, 4] to select the program. ≥To select with the numbered buttons: e.g., “5”: [0] ➜ [5] “15”: [1] ➜ [5] ≥Press [2, 1] to skip down several programs on the list. 3Press [CANCEL] or [ADD/DLT] to delete, You cannot delete programs that are currently recording. or press [ENTER] to change. The timer recording setting screen appears. 4If you pressed [ENTER] in step 3, Move through the items with [2,...
Page 30
![Page 30
30
RQT6986
Dubbing
Dubbing programs or play list
[HDD] [RAM] [DVD-R] [SD] [CARD] (Mobile hard disk only)
≥It is possible to dub a program or play list to another drive.
≥Dubbing a play list will create a program.
≥You can dub a maximum of 250 programs to HDD and 99 pro-
grams to DVD-RAM or DVD-R.
≥You can dub a maximum of 999 SD VIDEO (MPEG4) programs.
≥You can high speed dub. Using a high speed compatible DVD-R
allows you to dub in an even shorter amount of time.
≥You can use the Direct Navigator to...](http://img.usermanuals.tech/thumb/58/66394/w300_dmr-e100_en_om_d-29.png "Page 30
30
RQT6986
Dubbing
Dubbing programs or play list
[HDD] [RAM] [DVD-R] [SD] [CARD] (Mobile hard disk only)
≥It is possible to dub a program or play list to another drive.
≥Dubbing a play list will create a program.
≥You can dub a maximum of 250 programs to HDD and 99 pro-
grams to DVD-RAM or DVD-R.
≥You can dub a maximum of 999 SD VIDEO (MPEG4) programs.
≥You can high speed dub. Using a high speed compatible DVD-R
allows you to dub in an even shorter amount of time.
≥You can use the Direct Navigator to...")
30 RQT6986 Dubbing Dubbing programs or play list [HDD] [RAM] [DVD-R] [SD] [CARD] (Mobile hard disk only) ≥It is possible to dub a program or play list to another drive. ≥Dubbing a play list will create a program. ≥You can dub a maximum of 250 programs to HDD and 99 pro- grams to DVD-RAM or DVD-R. ≥You can dub a maximum of 999 SD VIDEO (MPEG4) programs. ≥You can high speed dub. Using a high speed compatible DVD-R allows you to dub in an even shorter amount of time. ≥You can use the Direct Navigator to...