Panasonic Dmp Bdt360 Owners Manual

							21SQT0080
Playback
You can use a smartphone or tablet as the Digital 
Media Controller (DMC) to playback contents 
from DLNA server on the Renderer (this unit).
Possible applications:
* DMC compatible software should be installed.
Preparation
Perform steps 1 and 2. (>20)
3 Perform the “Remote Device Settings”. 
(>27)
≥ You can register up to 16 devices.
1Press [HOME].
2Select “Network”.
3Select “Home Network”.
4Select “Media Renderer”.
5Select “Home Network” or “Wi-Fi Direct” 
and press [OK], then follow the indications 
on the screen.
6Operate the DMC compatible devices.
To exit from Media Renderer screen
Press [HOME].
	
≥ Wi-Fi Direct connection while using Home Network feature 
is only temporary, and the network connection method 
returns to the original setting when exiting.
≥ Depending on the device or connection environment, the 
data transfer rate may decrease.
≥ Depending on the contents and the connected equipment, 
playback may not be possible.
≥ Items displayed in gray on the display cannot be played 
back by this unit.
Using the Digital Media 
Controller
*
*
*

Renderer
Server
Server
Renderer Controller
Controller
About DLNA and Media renderer
For more details, refer to the following website 
and the owner’s manuals for each of the 
equipment.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
DMP-BDT460_360_SQT0080_eng.book  21 ページ  ２０１３年１２月１９日　木曜日　午後３時０分 
						

							22SQT0080
“HDMI CEC”
This unit supports “HDMI CEC” (Consumer 
Electronics Control) function.
You can use this function by connecting the 
equipment with an HDMI cable*. See the 
owner’s manuals for connected equipment for 
operational details.
*[BDT460] : Only when connecting via an HDMI AV OUT 
MAIN terminal on this unit.
Preparation
1 Set “HDMI CEC” to “On” ( >28). (The default 
setting is “On”.)
2 Set the “HDMI CEC” operations on the 
connected equipment (e.g., TV).
3 Turn on all “HDMI CEC” compatible 
equipment and select this unit’s input channel 
on the connected TV so that the “HDMI CEC” 
function works properly.
Repeat this procedure when the 
connections or settings are changed.
When the unit starts playback, the TV will 
automatically switch the input channel and the 
screen of the unit will be displayed.
Additionally when the TV is off, the TV will 
automatically turn on.
All connected equipment compatible with “HDMI 
CEC”, including this unit, automatically turns off 
when you switch the TV off.
	≥ This unit supports the “HDMI CEC” (Consumer Electronics 
Control) function. However, operation cannot be 
guaranteed on all HDMI CEC devices.
SettingsOption menu
A variety of playback operations and settings can 
be performed from this menu.
Available options differ depending on the playing 
contents and the condition of the unit.
About Multi User Mode
 : Settings of the items with this indication are 
saved by the respective users registered in the 
HOME menu. ( >16)
1Press [OPTION].
≥When playing music, select “Playback 
Settings” and press [OK].
e.g., BD-Video
2Select an item and change the settings.
To exit the screen
Press [OPTION].
Regarding Language : ( >35)
∫ Soundtrack
Show or change the soundtrack.
∫ Audio channel
Select the audio channel number.
∫ Subtitle
Change the subtitle settings.
∫ Angle
Select the number of the angle.
∫ Repeat Play
Select the item that you want to repeat.
≥ You can repeat the playback of a chapter, 
playlist, the entire disc, etc., but the items 
displayed will differ depending on the type of 
the media.
≥ Select “Off” to cancel.
Automatic input switching
Power on link
Power of f link
Operation Menu
Operation Menu
Pop-up MenuZoom
Closed Caption
Top Menu
Secondary Video Primary Video Status Repeat Play
Angle
Subtitle
Soundtrack
Off
MPEG-4 AVC
1ENG DTS-HD MSTR ...
DMP-BDT460_360_SQT0080_eng.book  22 ページ  ２０１３年１２月１９日　木曜日　午後３時０分 
						

							23SQT0080
Playback
Settings
∫Shuffle
Select whether or not to play random.
∫ Start Slideshow
Start the slideshow.
∫ Status
Show the status messages.
∫ Rotate Right
∫ Rotate Left
Rotate the still picture.
∫ Wa llpaper
Set the still picture to the wallpaper of HOME 
menu.  (> 15)
∫Icon Personalization
Set the still picture as your user icon.  (> 16)
∫Video
The recording method of original video appears.
∫ Primary Video
The recording method of original primary video 
appears.
∫ Secondary Video
∫Zoom
Videos and pictures are magnified.
∫ To p  M e n u
Display Top Menu.
∫ Pop-up Menu
Display Pop-up Menu.
∫ Menu
Display Menu.
∫ Closed Caption   ( >26)
You can only set “Manual setting” and “CC Reset” 
in the Setup menu.
∫ Picture Mode 
Select the picture quality mode during play.
≥ If you select “User”, you can change settings in 
“Picture Adjustment”.
∫ Picture Adjustment 
Specific picture quality settings can be changed.
∫ Progressive
Select the method of conversion for progressive 
output to suit the type of material being played.
≥ When the content is distorted, change the 
settings from “Auto” to “Video”.
∫ 24p
Movies and other material recorded on 
DVD-Video at 24p are output at 24p.
≥ Only when you have selected “24p(4K)” or 
“24p” in “24p(4K)/24p Output” ( >24).
∫Reset to Default Video Settings
Return video settings to the factory defaults.
∫ Signal Format
∫Distance
Set the amount of depth perception.
∫ Pop-Out Level 
3D position for the Option menu or message 
screen, etc. can be adjusted during 3D playback.
Video
Select on/off for images. The 
recording method of original 
video appears.
≥ During search/slow motion or 
frame-by-frame, only the 
primary video is displayed.
SoundtrackSelect on/off for audio and the 
language.
Video Settings
3D Settings
OriginalKeep original picture format.
Side by side3D picture format comprising of 
left and right screens.
2D to 3DConverts 2D pictures to 3D 
effect.
DMP-BDT460_360_SQT0080_eng.book  23 ページ  ２０１３年１２月１９日　木曜日　午後３時０分 
						

							24SQT0080
Setup menu
Change the unit’s settings if necessary. The 
settings remain intact even if you switch the unit 
to standby.
Some items are common to the Option menu. You 
can get the same effect with both menus.
About Multi User Mode : Settings of the items with this indication are 
saved by the respective users registered in the 
HOME menu. ( >16)
1Press [HOME].
2Press [OK] to select “Setup”.
3Select “Player Settings”.
4Select an item and change the settings.
To exit the screen
Press [HOME]. ∫
Picture Mode   (> 23)
∫Picture Adjustment   (> 23)
∫HDMI Output
Press [OK] to show the following settings:
¾ HDMI Resolution
The items supported by the connected devices 
are indicated on the screen as “ ¢”. When any 
item without “ ¢” is selected, the images may be 
distorted.
≥ If “Auto” is selected, the best suited output 
resolution to the connected TV is 
automatically selected.
≥ To enjoy high-definition video up-converted to 
1080p, you need to connect the unit directly 
to 1080p compatible HDTV (High Definition 
TV). If this unit is connected to an HDTV 
through other equipment, the other equipment 
must also be 1080p compatible.
¾24p(4K)/24p Output
This setting is for selecting the output method 
for content recorded in 24p*
1, such as movies.
≥ Connect the compatible TV for each (4K or 
1080/24p) output to the HDMI AV OUT MAIN 
[BDT460] /HDMI AV OUT  [BDT361] [BDT360]  
terminal of this unit.
≥ “24p(4K)” works only when playing back in 
2D.
≥ When playing DVD-Video, set this setting to 
“24p(4K)” or “24p”, and then “24p” in “Video 
Settings” ( >23) to “On”.
≥ When BD-Video/DVD-Video images other 
than 24p are played, images are output at 
60p.
¾HDMI Color Mode
This setting is for selecting color-space 
conversion of the image signal.
¾ Deep Color Output
This setting is for selecting whether to use Deep 
Color Output when a TV that supports Deep 
Color is connected.
OKRETURN
Player Settings
System Ratings
Network
Language
3D Audio
Video
HDMI Output
Picture Adjustment
Picture Mode
Normal
Video
24p(4K)Outputs signals by upconverting 
them to 4K*2.
24pOutputs in 24p.
DMP-BDT460_360_SQT0080_eng.book  24 ページ  ２０１３年１２月１９日　木曜日　午後３時０分 
						

							25SQT0080
Settings
¾Contents Type Flag
Depending on the playback content, the TV will 
output adjusting to the optimal method when a 
TV that supports this  function is connected.
¾HDMI(SUB) Output Mode  [BDT460]
Set to output the video from the HDMI AV OUT 
SUB terminal or not.
*1A progressive image recorded at a rate of 24 frames per 
second (motion-picture film). Many BD-Video movie 
contents are recorded in 24 frames/second in accordance 
with the film materials.
*2A high resolution image/display technology of 
approximately 4000 (width) k 2000 (height) pixels.
∫ Dynamic Range Compression
You can listen at low volumes but still hear 
dialogue clearly.
(Dolby Digital, Dolby Digital Plus and Dolby 
TrueHD only)
≥ “Auto” is effective only when playing Dolby 
TrueHD.
∫ Digital Audio Output
Press [OK] to show the following settings:
¾ Dolby D/Dolby D +/Dolby TrueHD
¾ DTS/DTS-HD
Select the audio signal to output.
≥ Select “PCM”, when the connected 
equipment cannot decode the respective 
audio format. This unit decodes the audio 
format and transmits to the connected 
equipment.
≥ If you do not make proper settings the audio 
may be static or noisy.
¾BD-Video Secondary Audio
Select whether or not to mix the primary and 
secondary audio (including the button click 
sound).
If “Off” is selected, the unit outputs the primary 
audio only.
¾ HDMI Audio Output
This setting selects whether or not to output 
audio from HDMI.
≥ Select “Off” when the TV is connected to this 
unit via HDMI AV OUT terminal, and this unit 
is also connected to other devices, such as 
an amplifier/receiver via an OPTICAL 
terminal.
∫ PCM Down Conversion
Select how to output audio with a sampling 
frequency of 96 kHz for the PCM output from the 
OPTICAL.
≥ If “On” is selected, the signals that are 
converted to 48 kHz are output.
≥ If “Off” is selected, and the connected 
equipment does not support 96 kHz, the sound 
will not be output normally.
≥ Signals are converted to 48 kHz despite the 
settings in the following cases:
– when the signals have a sampling frequency 
of 192 kHz
– when the disc has copy protection
– when “BD-Video Secondary Audio” is set to  “On”
∫ Downmix
Select the downmix system of multi-channel to 
2-channel sound.
≥ Select “Surround encoded”, when the 
connected equipment supports the virtual 
surround function.
≥ The downmix effect is not available when 
“Digital Audio Output” is set to “Bitstream”.
≥ The audio will be output in “Stereo” in the 
following cases:
– AVCHD playback
– Playback of secondary audio (including the 
button click sound).
∫ DTS Neo:6
2ch (2.1ch) audio is expanded to 7ch (7.1ch).
≥ This function works when the following 
conditions are met:
– Audio is output from the HDMI AV OUT 
terminal.
– Audio recorded at 96 kHz or lower is output.
– “Digital Audio Output” is set to “
PCM” when 
audio other than PCM is output.
Audio
DMP-BDT460_360_SQT0080_eng.book  25 ページ  ２０１３年１２月１９日　木曜日　午後３時０分 
						

							26SQT0080
∫3D BD-Video Playback
Select the playback method of 3D compatible 
video software.
∫ 3D AVCHD Output
Select the output method of 3D AVCHD videos.
∫ 3D Playback Precautions
Set to display or hide the 3D viewing warning 
screen when playing back the 3D compatible 
video software.
∫ Pop-Out Level   (> 23)
∫Audio Language
Choose the language for audio.
≥ If “Original” is selected, the original language of 
each disc will be selected.
≥ Enter a code ( >35) when you select “Other 
¢¢¢¢ ”.
∫Subtitle Language
Choose the language for the subtitle.
≥ If “Auto” is selected and the language selected 
for “Audio Language” is not available, subtitles 
of that language will automatically appear if 
available on that disc.
≥ Enter a code ( >35) when you select “Other 
¢¢¢¢ ”.
∫Menu Language
Choose the language for the disc menus.
≥ Enter a code ( >35) when you select “Other 
¢¢¢¢ ”.
∫Subtitle Text
Select a desired item according to the language 
used for MKV/Xvid  [For[Canada] subtitles text.
≥ This item is displayed only after playing back a 
file.
∫ On-screen Language
Choose the language for menus and on-screen 
messages.
∫ Closed Caption
Closed captioning services are dependent on 
contents, and the unit can display closed captions 
of both digital and analog types.
Press [OK] to show the following settings:
¾ Closed Caption Display 
Set whether or not to display closed captions.
¾ Closed Caption Type 
Select the closed caption type that matches the 
one of the content to be played back.
¾ Analog CC 
Select the channel of analog closed captions.
¾ Digital CC 
Select the channel of digital closed captions.
¾ Manual setting 
Set the display style of closed captions.
¾ CC Reset
Restore the default “Closed Caption” settings.
∫ Easy Network Setting ( >12)
∫ Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings:
¾ LAN Connection Mode
Select the LAN connection method.
≥ Select “Wireless Master” when you make a 
direct wireless connection between this unit 
and a Home Network device. Internet 
connection is not available when this item is 
selected.
¾Wireless Settings
This allows the wireles s router and connection 
settings to be set up. Current connection 
settings and connection state can be checked.
Press [OK] to show the following settings:
Connection Setting
The wireless router connection wizard will be 
displayed.
3D
Language
Network
DMP-BDT460_360_SQT0080_eng.book  26 ページ  ２０１３年１２月１９日　木曜日　午後３時０分 
						

							27SQT0080
Settings
Double Speed Mode Setting (2.4GHz)
Set the connection speed for a 2.4 GHz 
wireless format.
≥If you connect using the “Double Speed 
Mode (40MHz)”, 2 channels use the same 
frequency band, and there is consequently 
a greater risk of reception interference. This 
can cause the connecti on speed to drop or 
become unstable.
¾ IP Address/DNS Settings
This is for checking the state of the network 
connection and setting the IP address and 
DNS-related.
Press [OK] to show the respective setting.
¾ Proxy Server Settings
This is for checking the state of connection with 
the Proxy server and performing settings.
Press [OK] to show the respective setting.
¾ Network Service Settings ( >19)
Press [OK] to show the following settings:
Time Zone
Set the unit’s time to match your location.
≥ Some Network Service contents require the 
time zone to be set. Set time zone if 
necessary.
DST
Select “On” when using Daylight Saving time.
¾Network Drive Connection
It is possible to access the shared folder of 
equipment not compatible with DLNA, such as 
the Windows XP operating system, and play 
back video, still pictures, and music on this unit.
For the setting and operation method of 
connected equipment, refer to the following 
website. 
http://panasonic.jp/support/global/cs/
(This site is in English only.)
¾ Remote Device Settings ( >19, 21)
Press [OK] to show the following settings:
Remote Device Operation
Enable to operate the unit by DMC, etc.
≥ If “On” is selected, “Quick Start” will be 
activated.
Setting Unit Name
Set the name of this unit to be displayed on 
the connected equipment.
Registration Type
Remote Device List
Registering/deregistering of the displayed 
equipment can be performed when “Manual” 
in “Registration Type” is selected.
¾BD-Live Internet Access ( >18)
You can restrict Internet access when BD-Live 
functions are used.
≥ If “Allow ( Limited )” is selected, Internet 
access is permitted only for BD-Live contents 
which have content owner certificates.
The following items use the same password.
Don’t forget your password.
∫ DVD-Video Ratings
Set a ratings level to limit DVD-Video play.
∫ BD-Video Ratings
Set an age limit of BD-Video play.
∫ Network Service Lock
You can restrict the usage of Network Service.
∫ Easy Settings
You can execute basic settings.
∫ Display Settings
Press [OK] to show the following settings:
AutoAllow connections to all the 
equipment accessing this unit.
Manual
Set the permission for 
individual equipment 
connections accessing this 
unit.
Ratings
System
DMP-BDT460_360_SQT0080_eng.book  27 ページ  ２０１３年１２月１９日　木曜日　午後３時０分 
						

							28SQT0080
¾TV Aspect
Set to match the type of TV connected.
When connected to a 4:3 aspect TV and playing 
16:9 ratio image:
When connected to a 16:9 widescreen TV and 
playing 4:3 ratio image:
¾ Screen Saver Function
This is to prevent image retention on the 
screen.
≥ When this is set to “On”:
If a list of playback content is displayed and 
there is no operation for 10 minutes or more, 
the screen switches to HOME menu 
automatically.
≥ While playing and pausing, etc., this function 
is not available.
¾Status Messages
Choose whether to show status messages 
automatically.
¾ HDMI CEC
Set to use “HDMI CEC” function when 
connected via HDMI cable to a device that 
supports “HDMI CEC”.
≥ Select “Off”  when you do not want to use 
“HDMI CEC”.
∫ Unit Settings
Press [OK] to show the following settings:
¾ Mixed Data Disc Option
Select the playback contents on discs with both 
data files and Video.
≥ If “MP3/JPEG/MKV” is selected, data file can 
be played back.
≥ If “BDAV/AVCHD” is selected, BDAV and 
AVCHD can be played back.
¾Front Panel Display
Changes the brightness of the unit’s display.
≥ If “Auto” is selected, the display is set to bright 
and only dimmed during playback.
¾Blue LED  [BDT460] [BDT361/360_for_U.S.A.]
Set whether to light the blue LED in the center 
of this unit when turned ON.
¾ HDMI(SUB) V.OFF LED Control  [BDT460]
Set to light the HDMI (SUB) V.OFF LED or not.
≥ This will light when “HDMI(SUB) Output 
Mode” ( >25) is set to “V.OFF”.
¾Edit User Information
Change the user information registered in the 
HOME menu.
∫ Start-up Banner
Select whether to display the banner after turning 
on this unit. ( >15)
∫ Quick Start
Speed of start-up from standby mode is 
increased.
≥ When set to “On”, the internal control unit will be 
powered and the idle power consumption will 
increase so compared to when set to “Off”. 
(Power consumption  >34)
∫ Remote Control Code
Change the remote control code if other 
Panasonic products react to this remote control.
∫ Firmware Update ( >13)
Press [OK] to show the following settings:
4:3 Pan & 
Scan
The sides are cut 
off so the picture 
fills the screen. 
When playing 
BD-Video, video is output as “4:3 
Letterbox”.
4:3 
LetterboxBlack bands 
appear at the top 
and bottom of the 
picture.
16:9
Video is displayed as a 4:3 ratio 
image in the center of the 
screen.
16:9 Full
Video is displayed as a 
horizontally stretched 16:9 
image.
DMP-BDT460_360_SQT0080_eng.book  28 ページ  ２０１３年１２月１９日　木曜日　午後３時０分 
						

							29SQT0080
Settings
¾Automatic Update Check
When this equipment remains connected to the 
Internet, it will check for the latest firmware 
version when it is turned on and you can update 
it if necessary.
¾ Update Now
You can update the firmware manually if a 
firmware update is available.
∫ System Information
Press [OK] to show the following settings:
¾ License
Information about the software used by this unit 
is displayed.
¾ Firmware Version Information
Display firmware version of this unit and 
wireless LAN module.
∫ Restore Default Settings
This returns all values in the Setup menu and the 
Option menu to the default settings, except for 
some settings of network, ratings, remote control 
code, on-screen language, etc.
DMP-BDT460_360_SQT0080_eng.book  29 ページ  ２０１３年１２月１９日　木曜日　午後３時０分 
						

							30SQT0080
ReferenceTroubleshooting guide
Before requesting service, please perform the 
following steps.
∫Unit does not respond to remote 
control or unit’s buttons.
Disconnect AC power supply cord, wait 1 minute, 
then reconnect AC power supply cord.
The following do not indicate a problem with 
this unit:
– Regular disc rotating sounds.
– Image disturbance during search.
– Image disturbance when replacing 3D discs.
∫Cannot eject disc.
1 Turn the unit on.
2 Press and hold [OK], the yellow button and 
the blue button on the remote control at the 
same time for more than 5 seconds.
– “00 RET” is displayed on the unit’s display.
3 Press [ 1] (right) repeatedly on the remote 
control until “06 FTO” is displayed on the 
unit’s display.
4 Press [OK]. To return to the factory defaults.
¾
Select “Yes” in “Restore Default Settings” in 
the Setup menu. ( >29)
To return all settings to the factory preset.
¾ Reset the unit as follows:
1 Turn the unit on.
2 Press and hold [OK], the yellow button and 
the blue button on the remote control at the 
same time for more than 5 seconds.
– “00 RET” is displayed on the unit’s display.
3 Press [ 1] (right) repeatedly on the remote 
control until “08 FIN” is displayed on the unit’s 
display.
4 Press and hold [OK] for more than 5 seconds.
The remote control does not work properly.
¾Change the batteries in the remote control. 
(>5)
¾ The remote control and this unit are using 
different codes. If “SET  ” is displayed on the 
unit’s display when a button is pressed on the 
remote control, change the code on the 
remote control. 
Press and hold [OK] and the displayed 
number (“ ”) for at least 5 seconds.
The TV tuner mode is not displayed when the 
TV is turned on.
¾ This phenomenon may occur, depending on 
the TV setting, when “Quick Start” is set to 
“On”.
¾ Depending on the TV, this phenomenon may 
be prevented by reconnecting the HDMI cable 
to a different HDMI input terminal or by 
changing the HDMI auto connection setting.
You have forgotten your ratings password.
You want to cancel the ratings level.
¾The ratings level returns to the factory 
defaults.
1 Turn the unit on.
2 Press and hold [OK], the yellow button and 
the blue button on the remote control at the 
same time for more than 5 seconds.
– “00 RET” is displayed on the unit’s display.
3
Press [ 1](right) repeatedly on the remote 
control 
until “03 VL” is displayed on the unit’s 
display.4 Press [OK].
Do you have the latest firmware installed?
Panasonic is constantly improving the unit’s 
firmware to ensure that our customers are 
enjoying the latest technology. ( >13)
4
Make the following checks and visit our 
website for more information.
For U.S.A.  : 
www.panasonic.com/support
Enter the model number.
For Canada  : 
http://www.panasonic.ca
4
Or visit our website to find a service center.
You can find a service c enter near you easily 
on our website.
Other support information :
“Customer Services Directory (United States 
and Puerto Rico)” ( >37) or “CONTACT 
INFORMATION” ( >38).
General operation
DMP-BDT460_360_SQT0080_eng.book  30 ページ  ２０１３年１２月１９日　木曜日　午後３時０分