Panasonic Dmp Bdt310 Owners Manual

							VQT3B58-2
Owner’s Manual
Blu-ray Disc
TM Player
Model No. DMP-BDT310 DMP-BDT215
DMP-BDT210DMP-BDT110
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely. 
Please keep this manual for future reference.
If you have any questions contact
U.S.A. and Puerto Rico : 1-800-211-PANA(7262)
Canada : 1-800-561-5505
The illustration shows the image of DMP-BDT310.
PPCPX
DMP-BDT110_210_VQT3B58_eng.book  1 ページ  ２０１１年５月１７日　火曜日　午後４時４３分 
						

							2VQT3B58
G etting star ted
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow 
the safety instructions on the unit and the applicable safety instructions 
listed below. Keep these operating instructions handy for future reference.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators, heat registers, 
stoves, or other apparatus (including amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or grounding-type  plug. A polarized plug has two blades with one wider than the other. A 
grounding-type plug has two blades and a third grounding prong. The 
wide blade or the third prong are provided for your safety. If the 
provided plug does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched particularly at plugs, 
convenience receptacl es, and the point where they exi t from the apparatus.
11 Only use attachments/accessories specified by the manufacturer.12 Use only with the cart, stand, tripod, bracket, or table specified by the manufactur er, or sold with the appar atus. 
When a cart i s used, use cauti on when movi ng the cart/
apparatus combination to avoid injury from tip-over.
13 Unplug this apparatus during lightning storms or when unused for long periods of time.
14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,  
such as power-supply cord or plug is damaged, liquid has been spilled or 
objects have fallen int o the apparatus, the apparatus has been exposed 
to rain or moisture, does not  operate normally, or has been dropped.
UnitTo reduce the risk of fire, electric shock or product damage,
– Do not expose this unit to rain, moisture, dripping or splashing.
– Do not place objects filled with liquids, such as vases, on this unit.
– Use only the recommended accessories.
– Do not remove covers.
– Do not repair this unit by yourself. Refer servicing to qualified service personnel.
Unit– This unit utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in 
hazardous radiation exposure.
– Do not place sources of naked flames, such as lighted candles, on this unit.PlacementTo reduce the risk of fire, electric shock or product damage,
– Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated.
– Do not obstruct this unit’s ventilation openings with newspapers, 
tablecloths, curtains, and similar items.
(Inside of product) THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND 
CANADA.
WA RN ING
CAUTION
[For_units_with_PX_printed_on_the_outer_packaging]
THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits for 
a Class B digital device, pursuant to Part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, 
uses, and can radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee 
that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and 
on, the user is encouraged to try to correct the interference by one or 
more of the following measures:
≥
Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected.
≥ Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, follow the attached 
installation instructions and use only shielded interface cables when 
connecting to peripheral devices.
Any changes or modifications not expressly approved by the party 
responsible for compliance could void the user’s authority to operate 
this equipment.
This device complies with Part 15 of the FCC Rules. Operation is 
subject to the following two conditions: (1) This device may not cause 
harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)
The lightning flash with arrowhead symbol, within an 
equilateral triangle, is intended to alert the user to the 
presence of uninsulated “dangerous voltage” within 
the product’s enclosure that may be of sufficient 
magnitude to constitute a risk of electric shock to persons.
CAUTION
CAUTION :TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is 
intended to alert the user to the presence of important 
operating and maintenance (servicing) instructions in 
the literature accompanying the appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DMP-BDT110_210_VQT3B58_eng.book  2 ページ  ２０１１年５月１７日　火曜日　午後４時４３分 
						

							Getting started
Connections & Settings
Playback
Settings
Reference
3VQT3B58
Table of contents
Getting started
IMPORTANT SAFETY 
INSTRUCTIONS . . . . . . . . . . . . . . . .  2
Accessories. . . . . . . . . . . . . . . . . . . .  4
Unit and media care  . . . . . . . . . . . . .  4
Control reference guide  . . . . . . . . . .  5
Playable discs/Cards/USB devices . .  6
Connections & Settings
STEP 1 : Connecting to a TV  . . . . . .  8
STEP 2 : Connecting to an amplifier/receiver . . . . . . . . . . . . . . .  9
STEP 3 : Connecting to a broadband  network . . . . . . . . . . . . . .  10
STEP 4 : Connecting to an AC power  source . . . . . . . . . . . . . . .  12
STEP 5 : Settings . . . . . . . . . . . . . .  12
Playback
Inserting or removing media . . . . . .  16
HOME menu . . . . . . . . . . . . . . . . . .  16
Playing video contents  . . . . . . . . . .  17
Enjoying 3D video . . . . . . . . . . . . . .  20
Playing still pictures  . . . . . . . . . . . .  21
Playing music  . . . . . . . . . . . . . . . . .  22
Enjoying VIERA CAST
TM. . . . . . . . .  23
Playing contents saved on other 
equipment . . . . . . . . . . . . . . . . . . . .  24
Linked operations with the TV 
(VIERA LinkTM “HDAVI ControlTM”). . . . . .  26
Settings
Playback menu. . . . . . . . . . . . . . . . . 27
Setup menu  . . . . . . . . . . . . . . . . . . . 29
Reference
Troubleshooting guide . . . . . . . . . . . 34
Messages . . . . . . . . . . . . . . . . . . . . . 37
Supplemental information  . . . . . . . . 38
Specifications . . . . . . . . . . . . . . . . . . 39
Limited Warranty (ONLY FOR U.S.A. 
AND PUERTO RICO)  . . . . . . . . . . . 41
Limited Warranty 
(Only for CANADA)  . . . . . . . . . . . . . 42
Referencia rápida en español 
(Spanish Quick Reference) 
[Para EE.UU. y Canadá]. . . . . . . . . . . . . . . . 43
Index  . . . . . . . . . . . . . . . . . Back cover
About descriptions in this Owner’s 
Manual
≥ Instructions for operations are generally described 
using the remote control.
≥ This Owner’s Manual is applicable to models 
DMP-BDT310, DMP-BDT215, DMP-BDT210 and 
DMP-BDT110. Unless otherwise indicated, illustrations 
in this Owner’s Manual are of DMP-BDT310.
[BDT310]  [BDT215]  [BDT210]  [BDT110]  : indicates features 
applicable to DMP-BDT310, DMP-BDT215, 
DMP-BDT210 and DMP-BDT110, respectively.
About Firmware updates (>15)
DMP-BDT110_210_VQT3B58_eng.book  3 ページ  ２０１１年５月１７日　火曜日　午後４時４３分 
						

							4VQT3B58
Accessories
Check the supplied accessories before using this unit.
1 Remote control(N2QAYB000574)
2 Batteries for remote control
1 AC power supply cord [For_U.S.A._and_Canada]
(K2CB2CB00022)
[For_units_with_PX_printed_on_the_outer_packaging]
(K2CQ2CA00007)
1 [For_units_with_PX_printed_on_the_outer_packaging]
AC plug adaptor
(K2DAYYY00002)
1 [BDT215]
 HDMI cable
(K1HY19YY0012)
	≥ Product numbers provided in this Owner’s Manual correct as of 
December 2010. These may be subject to change.
≥ Do not use AC power supply cord with other equipment.
≥
[For_U.S.A._and_Puerto_Rico] : To order accessories, refer to 
“Accessory Purchases (United States and Puerto Rico)” on page 41. 
[For_other_areas] : To order accessories, call the dealer from whom 
you have made your purchase.
Insert so the poles ( i and j ) match those in the remote 
control.
Point it at remote control signal sensor on this unit. ( >5)
	Mishandling of batteries can cause electrolyte leakage which can damage 
items the fluid contacts and may cause a fire.
≥Do not mix old and new batteries or different types at the same time.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in a car exposed to direct sunlight for a 
long period of time with doors and windows closed.
≥ Do not take apart or short circuit.
≥ Do not attempt to recharge alkaline or manganese batteries.
≥ Do not use batteries if the covering has been peeled off.
Remove batteries if the remote control is not going to be used for a long 
period of time. Store in a cool, dark place.
Unit and media care
∫ Clean this unit with a soft, dry cloth
≥Never use alcohol, paint thinner or benzine to clean this 
unit.
≥ Before using chemically treated cloth, carefully read the 
instructions that came with the cloth.
∫ Clean the lens
≥Use the lens cleaner (not supplied) to clean the unit’s lens.
∫ Clean discs
Wipe with a damp cloth and then wipe dry.
∫Disc and card handling precautions
≥Handle discs by the edges to avoid inadvertent scratches 
or fingerprints on the disc.
≥ Do not attach labels or stickers to discs.
≥ Do not use record cleaning sprays, benzine, thinner, static 
electricity prevention liquids or any other solvent.
≥ Clean any dust, water, or foreign matter from the terminals 
on the rear side of the card.
≥ Do not use the following discs:
– Discs with exposed adhesive from removed stickers or 
labels (rented discs etc).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart shapes.
∫ To dispose or transfer this unit
The unit may keep the user settings information in the unit. If 
you discard this unit either by disposal or transfer, then 
follow the procedure to return all the settings to the factory 
presets to delete the user settings. ( >34, “To return all 
settings to the factory preset.”)
≥ The operation history may be recorded in the memory of 
this unit.
[For_Canada]
The enclosed Canadian French label sheet corresponds to the English 
display on the front and back side of the unit.
Using the remote control
CAUTION≥
Danger of explosion if battery is incorrectly replaced. Replace only 
with the type recommended by the manufacturer.
≥ When disposing the batteries, please contact your local authorities 
or dealer and ask for the correct method of disposal.

R6/LR6, AA

(Alkaline or 
manganese batteries)
DO  DO NOT
DMP-BDT110_210_VQT3B58_eng.book  4 ページ  ２０１１年５月１７日　火曜日　午後４時４３分 
						

							Getting started
5VQT3B58
Control reference guide
1 Turn the unit on and off
2 TV operation buttonsYou can operate the Panasonic TV through the unit’s 
remote control. (Depending on the TV these buttons 
may not work.)
[Í TV POWER] : Turn the television on and off
[AV]  :  Switch the input select
[ ijVOL]  :  Adjust the volume
3 Select title numbers, etc./Enter numbers or characters  (>23)
[CANCEL] : Cancel
4 Basic playback control buttons ( >17)
5 Show status messages ( >17)
6 Show Pop-up menu/Top menu/Direct Navigator ( >17)
7 Show sub menu ( >18)
8 These buttons are used when;
≥Operating a BD-Video disc that includes Java
TM 
applications (BD-J).
≥ Operating contents of VIERA CAST. ( >23)
9 Transmit the remote control signal
10 Open or close the disc tray ( >16)
CAUTION
Do not place objects in front of the unit. The disc tray 
may collide with objects when it is opened, and this may 
cause malfunction.
11 Show Playback menu ( >27)
12 Start up a video communication ( >23)
13 Setup 3D effects ( >20)
14 Select audio ( >17)
15 Show NETFLIX screen
16 Exit the menu screen
17 Displays the Home screen of the VIERA CAST ( >23)
18 Show HOME menu ( >16)
19 Selection/OK, Frame-by-frame ( >17)
20 Return to previous screen
1 POWER button ( POWER Í/I) (> 12)
Press to switch the unit from on to standby mode or vice 
versa. In standby mode, the unit is still consuming a 
small amount of power.
2Disc tray ( >16)
3SD card slot ( >16)
4USB port ( >16)
5 [BDT310]
 : V.OFF LED (Video off LED)
It is possible to set the LED to turn on/off. ( >31)
6CALL LED  (> 23)
The LED will light up when this unit receives incoming 
call etc. of the video communication. 7 Remote control signal sensor
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20 e up and down, 30 e left and right
8 Display
9Stop ( >17)
10 Start play ( >17)
11 Open or close the disc tray ( >16)
12 [BDT310] [BDT215]  [BDT210]  : Touch Free Sensor ( >33)
The LED will light up when TOUCH-FREE SENSOR is 
activated.
Rear panel terminals ( >8–10, 12)
1
2
3
4
5
6 17
8 7
18 16
20 19
14
13
15
12 11
10 9
SD CARDSD CARD
0ä0â0í0í
1234
12
5
6
7891011
Pull to flip down 
the front panel.
DMP-BDT110_210_VQT3B58_eng.book  5 ページ  ２０１１年５月１７日　火曜日　午後４時４３分 
						

							6VQT3B58
Playable discs/Cards/USB devices
TypeLogo examplesType detailPlayable contents (> 39)
BD-Video Video
BD-RE Video
JPEG/
MPO (3D still picture)
BD-R Video
DivX
® [BDT310/210_for_Canada]
MKV
DVD-Video
Video
DVD-R Video
AVCHD
DivX
® [BDT310/210_for_Canada]
MKV
MP3
JPEG/
MPO (3D still picture)
DVD-R DL
DVD-RW Video
AVCHD
—+R/+RW/+R DL
Music CD Music [CD-DA]
—CD-R
CD-RW DivX
® [BDT310/210_for_Canada]
MKV
Music [CD-DA]
MP3
JPEG/
MPO (3D still picture)
SD Memory Card (from 8 MB to 2 GB)
SDHC Memory Card (from 4 GB to 32 GB)
SDXC Memory Card (48 GB, 64 GB)
(Compatible with both mini and micro types)
MPEG2
AVCHD
JPEG/
MPO (3D still picture)
—USB devices
(up to 2 TB) DivX
® [BDT310/210_for_Canada]
MKV
MP3
JPEG/
MPO (3D still picture)
BD
DVD
CD
SD
USB
DMP-BDT110_210_VQT3B58_eng.book  6 ページ  ２０１１年５月１７日　火曜日　午後４時４３分 
						

							Getting started
7VQT3B58
∫Discs that cannot be played in this 
unit
Any other disc that is not specifically supported or 
previously described.
≥DVD-RAM
≥ Super Audio CD
≥ Photo CD
≥ DVD-Audio
≥ Video CD and Super Video CD
≥ WMA discs
≥ [BDT310/210_for_other_than_Canada]  [BDT215]  [BDT110]  : 
All types of DivX discs
[BDT310/210_for_Canada]  : DivX Plus HD discs
≥ PAL discs
≥ HD DVD
≥ BD-Video discs recorded at a rate of 50 fields/sec
∫ Region management information
BD-Video
This unit plays BD-Video marked with labels containing the 
region code  “A”.
Example:
DVD-Video
This unit plays DVD-Video marked with labels containing the 
region number  “1” or “ALL” .
Example:
∫ Finalize
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded 
by a recorder, etc. needs to be finalized by the recorder to 
play on this unit. Please refer to the recorder’s instructions.
∫BD-Video
≥This unit supports high bit rate audio (Dolby Digital Plus, 
Dolby TrueHD, DTS-HD High Resolution Audio and 
DTS-HD Master Audio) adopted in BD-Video.
– [BDT110]  : If “Dolby D/Dolby D +/Dolby TrueHD” is set to 
“PCM”, the maximum possible number of Dolby sound is 
5.1ch PCM.  (> 30)
∫3D
≥3D videos and 3D still pictures can be played back when 
this unit is connected to a 3D compatible TV using a High 
Speed HDMI Cable.
≥ 2D video can be enjoyed as 3D virtually. ( >20)
∫Music CD
≥Operation and sound quality of CDs that do not conform to 
CD-DA specifications (copy control CDs, etc.) cannot be 
guaranteed.
≥ The digital audio content side of a DualDisc does not meet 
the technical specifications of the Compact Disc Digital 
Audio (CD-DA) format so playback may not be possible.
∫ SD card
≥miniSD Cards, microSD Cards, microSDHC 
Cards and microSDXC Cards can be used, 
but must be used with an adaptor card. 
These are usually supplied with such cards, 
or otherwise customer provided.
≥ Keep the Memory Card out of reach of 
children to prevent swallowing.
≥ To protect the card’s contents, move the record prevention 
tab (on the SD card) to “LOCK”.
≥ This unit is compatible with SD Memory Cards that meet 
SD Card Specifications FAT12 and FAT16 formats, as well 
as SDHC Memory Cards in FAT32 format (Does not 
support long file name.) and SDXC Memory Cards in 
exFAT.
≥ If the SD card is used with incompatible computers or 
devices, recorded contents may be erased due to the card 
being formatted etc.
≥ Useable memory may be slightly less than the card 
capacity.
∫ USB device
≥This unit does not guarantee connection with all USB 
devices.
≥ This unit does not support USB device charging.
≥ When using Communication Camera TY-CC10W or 
Wireless LAN Adaptor DY-WL10, connect it to the rear 
terminal of this unit. ( >10, 23)
≥ FAT12, FAT16 and FAT32 file systems are supported.
≥ This unit supports USB 2.0 High Speed.
≥
Although this unit can use USB 3.0 devices as USB 2.0 
devices, in certain cases USB 3.0 devices cannot be used 
due to differing connector shape, larger current ratings,etc.
 
(Use of USB 2.0 devices is recommended.)
≥ This unit supports an HDD formatted in FAT32. If the HDD 
is not recognized the power to the HDD may not be 
supplied. Supply power from an external source.
	≥ It may not be possible to play the above media in some cases due to the 
type of media, the condition of the recording, the recording method and 
how the files were created.
≥ The producers of the disc can control how discs are played, so you may 
not always be able to control play as described in this Owner’s Manual. 
Read the disc’s instructions carefully.
2
4
1ALL1
DMP-BDT110_210_VQT3B58_eng.book  7 ページ  ２０１１年５月１７日　火曜日　午後４時４３分 
						

							8VQT3B58
STEP 1 : Connecting to a TV
≥Do not place the unit on amplifiers/receivers or equipment 
that may become hot. The heat can damage the unit.
≥ Before making any connections we suggest you 
temporarily disconnect all the units from AC power.
≥ Do not connect video signals through a video recorder. 
Due to copy guard protection the picture may not be 
displayed properly. ≥
Please use High Speed HDMI Cables that have the HDMI 
logo (as shown on the back cover). It is recommended that 
you use Panasonic’s HDMI cable. When outputting 1080p 
signal, please use HDMI cables 5.0 meters (16.4 ft.) or 
less.
Recommended part number (High Speed HDMI Cable):
RP-CDHS15 (1.5 m/4.9  ft.), RP-CDHS30 (3.0 m/9.8 ft.), 
RP-CDHS50 (5.0 m/16.4 ft.), etc.
LAN
10BASE-T/100BASE-TX
AUDIO OUTVIDEO OUTRLAV OUT   MAIN AV OUT   SUBCOMMUNICATION CAMERA
WIRELESS LAN
ADAPTOR
COMMUNICATION CAMERA
LAN
10BASE-T/100BASE-TX
COMMUNICATIONCAMERALAN
10BASE-T/100BASE-TX
Back of the unit
[BDT310]
[BDT215]
 
[BDT210]
[BDT110]
∫ Via an HDMI AV OUT terminal (High quality)
–[BDT310]  : Use HDMI AV OUT MAIN terminal.
– It is possible to play back 3D videos and 3D still  pictures by connecting this unit with a 3D compatible 
TV.
∫ Via a VIDEO OUT terminal (Standard quality)
≥Set “HDMI Audio Output” to “On” ( >32).
≥ The HDMI connection supports VIERA Link “HDAVI 
Control” ( >26). ≥
Connect terminals of the same color.
LAN
10BASE-T/100BASE-TX
AV OUT   MAIN AV OUT   SUBCOMMUNICATION
CAMERA
HDMI IN
HDMI cable
(Only supplied with 
DMP-BDT215)
AUDIO OUTVIDEO OUTRLCOMMUNICATIONCAMERA
Audio/Video cable
DMP-BDT110_210_VQT3B58_eng.book  8 ページ  ２０１１年５月１７日　火曜日　午後４時４３分 
						

							Connections & Settings
9VQT3B58
STEP 2 : Connecting to an amplifier/receiver
∫Via an HDMI AV OUT terminal
–[BDT310]  : Use HDMI AV OUT 
MAIN terminal.
– It is possible to play back 3D 
videos and 3D still pictures when 
the connected TV and amplifier/
receiver are 3D compatible.
∫[BDT310] : HDMI AV OUT SUB 
terminal 
– You can enjoy richer sound by using 
the HDMI AV OUT SUB terminal.
– It is possible to play back 3D  videos and 3D still pictures  when 
the connected TV is 3D 
compatible, even if the amplifier/
receiver is not 3D compatible.
∫ Via an OPTICAL terminal
≥Set “HDMI Audio Output” to “On” (>32).
≥Set “Digital Audio Output” depending 
on the connected amplifier/receiver 
(> 30).
≥ The HDMI connection supports VIERA 
Link “HDAVI Control” ( >26).
≥ When connecting to a non-3D 
compatible amplifier/receiver, connect 
this unit to a TV via HDMI AV OUT, 
then connect the TV and the amplifier/
receiver, using HDMI cables for the 
respective connections.
– Please note, however, that the audio 
can only be up to 5.1ch.
≥ When using the TV or amplifier/
receiver that does not have the 
indication of “(ARC)” 
(non-ARC-compatible) on the HDMI 
terminal, in order to enjoy TV’s sound 
by amplifier/receiver it is also required 
to connect the amplifier/receiver and 
TV using an optical digital cable. ≥
Set “HDMI Audio Output” to “On” 
(> 32).
≥ Set “HDMI(SUB) Output Mode” to 
“V.OFF”. ( >20)
– Audio is output in high resolution  regardless of compatibility of the 
amplifier/receiver with 3D.
≥ The HDMI connection using HDMI AV 
OUT MAIN supports VIERA Link 
“HDAVI Control” ( >26). 
The HDMI AV OUT SUB terminal is 
not compatible with the VIERA Link 
“HDAVI Control”. ≥
When connecting a TV ( >8) with 
HDMI AV OUT terminal, set “HDMI 
Audio Output” to “Off” ( >32).
≥ Set “Digital Audio Output” depending 
on the used terminal and connected 
amplifier/receiver ( >30).
HDMI IN
LAN
10BASE-T/100BASE-TX
AV OUT   MAIN AV OUT   SON
HDMI IN
HDMI IN
(ARC)
HDMI OUT (ARC)Multi channel 
speakers
Amplifier/receiver HDMI cable
HDMI cable
(Only supplied with 
DMP-BDT215)
N
00BASE-TX
AV OUT   MAIN AV OUT   SUB
HDMI IN
HDMI IN
HDMI cable
HDMI cable
Multi channel 
speakers
Amplifier/receiver
T   MAIN AV OUT   SUB
OPTICAL IN
Amplifier/receiver
Optical cable
DMP-BDT110_210_VQT3B58_eng.book  9 ページ  ２０１１年５月１７日　火曜日　午後４時４３分 
						

							10VQT3B58
STEP 3 : Connecting to a broadband network
The following services can be used when this unit is 
connected to broadband.
≥Firmware can be updated  (>15)
≥ You can enjoy BD-Live ( >19)
≥ You can enjoy VIERA CAST (> 23)
≥ You can access other devices (Home Network) ( >24) For details about connection method, refer to the 
instructions supplied with the connected equipment.
∫
LAN cable connection ∫Wireless LAN connection
–[BDT310]  [BDT215]  [BDT210]  : Wireless LAN is built in. 
(There is no need to connect a Wireless LAN 
Adaptor.)
– [BDT110]  : Connect the Wireless LAN Adaptor 
DY-WL10 (optional).
≥ Use category 5 or above straight LAN cables (STP) when 
connecting to peripheral devices.
≥ Inserting any cable other than a LAN cable in the LAN 
terminal can damage the unit. ≥
For up to date compatibility information on your Wireless 
router refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
For additional information about this unit refer to 
http://www.panasonic.com/consumer/support (For U.S.A.)
≥ The unit is not compatible with public wireless LAN 
services provided in airports, stations, cafes etc.
≥ [BDT110]
– Only the Wireless LAN Adaptor DY-WL10 (optional) can 
be used.
– Read the operating instructions for the Wireless LAN  Adaptor DY-WL10 (optional) thoroughly when using it.
– To simultaneously connect the Wireless LAN Adaptor 
DY-WL10 (optional) and a LAN cable, use the extension 
cable supplied with the DY-WL10.
COMMUNICATION CAMERALAN
10BASE-T/100BASE-TX
DEO OUTAV OUT   MAIN AV OUT   SUCOMMUNICATIONCAMERA
Broadband router, etc. LAN Cable
LAN Cable Modem 
(Broadband)
*Provided by ISP
WIRELESS LANADAPTOR
COMMUNICATION CAMERA
LAN
10BASE-T/100BASE-TX
Wireless router, etc.Wireless LAN Adaptor
LAN CableModem 
(Broadband)
*Provided by ISP
[BDT110]
DMP-BDT110_210_VQT3B58_eng.book  10 ページ  ２０１１年５月１７日　火曜日　午後４時４３分