Panasonic Dmp Bdt220 Owners Manual

							Settings
Reference
31VQT3V20
ReferenceTroubleshooting guide
Before requesting service, please perform the 
following steps.
The following do not indicate a problem with 
this unit:
– Regular disc rotating sounds.
– Image disturbance during search.
– Image disturbance when replacing 3D discs.
∫Unit doesn’t respond to remote 
control or front panel buttons.
Press and hold [ Í/I] on the main unit for 
3 seconds.
– If still unable to power the unit off, disconnect  the power cord, wait 1 minute, then reconnect 
the power cord.
∫ Cannot eject disc.
The unit may have a problem.
1 While the unit is off, press and hold [OK], [B] 
and [Y] on the remote control at the same 
time for more than 5 seconds.
– “00 RET” is displayed on the unit’s display.
2 Repeatedly press [ 1] (right) on the remote 
control or [ Í/I] on the unit until “06 FTO” is 
displayed on the unit’s display.
3 Press [OK] on the remote control or 
[< OPEN/CLOSE] on the unit. To return to the factory preset.
¾
Select “Yes” in “Restore Default Settings” in 
the Setup menu. ( >30)
To return all settings to the factory preset.
¾ Reset the unit as follows:
1 While the unit is off, press and hold [OK], [B] 
and [Y] on the remote control at the same 
time for more than 5 seconds.
– “00 RET” is displayed on the unit’s display.
2 Repeatedly press [ 1] (right) on the remote 
control or [ Í/I] on the unit until “08 FIN” is 
displayed on the unit’s display.
3Press and hold [OK] on the remote control or 
[4)
¾ The remote control and main unit are using 
different codes. If “SET  ” is displayed on the 
unit’s display when a button is pressed on the 
remote control, change the code on the 
remote control. ( >30, 34)
The TV tuner mode is not displayed when the 
TV is switched on.
¾
This phenomenon may occur, depending on the 
TV setting, when “Quick Start” is set to “On”.
¾ Depending on the TV, this phenomenon may 
be prevented by reconnecting the HDMI cable 
to a different HDMI input terminal or by 
changing the HDMI auto connection setting.
You have forgotten your ratings password.
You want to cancel the ratings level.
¾The ratings level returns to the factory preset.
1 While the unit is on, press and hold [OK], [B] 
and [Y] on the remote control at the same 
time for more than 5 seconds.
– “00 RET” is displayed on the unit’s display.
2 Repeatedly press [ 1] (right) on the remote 
control or [ Í/I] on the unit until “03 VL” is 
displayed on the unit’s display.
3 Press [OK] on the remote control or 
[< OPEN/CLOSE] on the unit.
Do you have the latest firmware installed?
Firmware updates may be released to correct 
operating irregularities that are discovered 
with certain movies. ( >13)
4
Make the following checks and visit our 
website for more information.
For U.S.A.  : 
www.panasonic.com/help
Enter the model number.
For Canada  : 
http://www.panasonic.ca
4
Or visit our website to find a service 
center.
You can find a service center near you easily 
on our website.
Other support information :
“Customer Services Directory (United States 
and Puerto Rico)” ( >41) or “Limited 
Warranty (Only for CANADA)” (> 42).
General operation
DMP-BDT220_VQT3V20_eng.book  31 ページ  ２０１１年１２月５日　月曜日　午後５時３５分 
						

							32VQT3V20
This unit does not recognize the USB 
connection correctly.
¾Disconnect and reconnect the USB cable. If it 
still does not recognize the connection, turn 
the power of this unit off and on again.
¾ If you connect USB HDD to this unit, use USB 
extension cable that is supplied with the HDD.
The images from this unit do not appear on 
the television.
Picture is distorted.
¾An incorrect resolution is selected in “HDMI 
Resolution”. Reset the setting as follows:
1 While the unit is on, press and hold [OK], [B] 
and [Y] on the remote control at the same 
time for more than 5 seconds.
– “00 RET” is displayed on the unit’s display.
2 Repeatedly press [ 1] (right) on the remote 
control or [ Í/I] on the unit until “04 PRG” is 
displayed on the unit’s display.
3 Press and hold [OK] on the remote control or 
[< OPEN/CLOSE] on the unit for at least 3 
seconds.
Set the item again. ( >25)
– When Dolby Digital Plus, Dolby TrueHD, 
and DTS-HD audio are not output in 
bitstream, select “Yes” in “Restore Default 
Settings” and make proper settings. ( >30)
¾ When “3D BD-Video Playback” in the Setup 
menu is set to “Auto”, images may not be 
output depending on the connection method. 
After removing the disc from this unit, select 
“Set before play” in the Setup menu, and 
select “2D Playback” in the setup screen 
displayed when playing 3D discs. ( >27)
Video is not output in high-definition.
¾ Confirm that “HDMI Resolution” in the Setup 
menu is set properly. ( >25)
3D video is not output.
¾ Change the settings as required by the 
connected TV format. ( >27, “3D Type”)
¾
Is there a non-3D compatible amplifier/receiver 
connected between this unit and a TV? (
>9)¾ Are the settings on this unit and the TV 
correct? ( >17)
¾ Is the amplifier/receiver that is connected 
between this unit and TV on?
¾ Depending on the connected TV, the video 
being played back might switch to 2D video 
due to changes in resolution etc. Check the 
3D setting on the TV.
3D video is not output correctly as 2D.
¾Select “Set before play” in the Setup menu, 
and select “2D Playback” in the setup screen 
displayed when playing 3D discs. ( >27, “3D 
BD-Video Playback”)
¾ Discs that have recorded titles with Side by 
side (2 screen structure) and that can be 
enjoyed in 3D are played back in accordance 
with the settings of the TV.
No subtitles.
¾When progressive output is on, closed 
captions/subtitles cannot be displayed.
The subtitles overlap closed captions 
recorded on discs.
¾Turn off the subtitles or the closed caption 
setting on the TV.  (> 22)
A black band is displayed around the edge of 
the screen.
The aspect ratio of the screen is abnormal.
¾
Confirm the “TV Aspect” is set properly. (>29)¾ Adjust the aspect setting on the television.
Picture
DMP-BDT220_VQT3V20_eng.book  32 ページ  ２０１１年１２月５日　月曜日　午後５時３５分 
						

							Reference
33VQT3V20
Cannot switch audio.
¾When connecting an amplifier/receiver using 
an OPTICAL terminal or an HDMI terminal, 
you cannot switch the audio if “Digital Audio 
Output” is set to “Bitstream”. Set “Digital 
Audio Output” to “PCM”. ( >26)
Cannot hear the desired audio type.
¾ Check the connections and the “Digital Audio 
Output” settings. ( >9, 26)
¾ To output audio from a device connected with 
an HDMI cable, set “HDMI Audio Output” to 
“On” in the Setup menu. ( >26)
Disc cannot be played.
¾ The disc is dirty. ( >4)
Still pictures (JPEG) do not play back 
normally.
¾ The images that were edited on the PC, such 
as Progressive JPEG, etc., may not be played 
back.
I can’t play back BD-Live.
¾The SD card is write-protected. ( >6)
¾ Confirm that this unit is connected to the 
broadband Internet. ( >10)
¾ Confirm the “BD-Live Internet Access” 
settings. ( >29)
¾ Confirm an SD card is inserted into the SD 
card slot. ( >14)
I can’t connect to the network.
¾ Confirm the network connection and settings. 
(>10, 11, 28)
¾ Check the operating instructions for each 
device and connect accordingly.
When using wireless LAN connection, video 
from the DLNA Certified media server is not 
played back or video frames are dropped 
during playback.
¾Higher transfer rate router such as 802.11n 
(2.4 GHz) wireless router may solve the 
problem. If you use 802.11n (2.4 GHz) 
wireless router, it is necessary to set the 
encryption type to “AES”.
Simultaneous use with a microwave, cordless 
telephone etc. at 2.4 GHz may result in 
connection interruptions  or other problems.
¾ On the “Wireless Settings” screen (> 28), the 
continuous lighting of at least 4 “Reception” 
indicators is the target for a stable connection. 
If 3 or fewer indicators are lit or the 
connection is being interrupted, change the 
position or angle of your wireless router and 
see if the connection stat e improves. If there 
is no improvement, connect to a wired 
network and perform the “Easy Network 
Setting” ( >11) again.
Audio
Playback
Network
DMP-BDT220_VQT3V20_eng.book  33 ページ  ２０１１年１２月５日　月曜日　午後５時３５分 
						

							34VQT3V20
Messages
The following messages or service numbers 
appear on the television or unit’s display.
Cannot play.
¾You inserted an incompatible disc (Discs 
recorded in PAL video, etc.).
Cannot display on this unit.
¾You tried to play a non-compatible image.
¾ Confirm “SD” on the unit’s display is not 
displayed and re-insert the card.
No disc inserted.
¾The disc may be upside down.
$ This operation is not available.
¾ Some operations are unsupported by the unit. 
For example;
– BD-Video: During playback, reverse 
slow-motion or reverse frame-by-frame is 
not possible.
IP address is not set.
¾ The “IP Address” in “IP Address/DNS 
Settings” is “---. ---. ---. ---”. Set the “IP 
Address”, “Subnet Mask”, and “Default 
Gateway”. (Select the automatic address 
acquisition if necessary.)
The current wireless network security setting 
is weak. It is recommended to change to a 
stronger security setting.
¾Authentication type for the wireless LAN is set 
to “Open system”, or the encryption type is 
set to “No encryption”. It is recommended to 
encrypt for safety reasons. For details, refer 
to the instructions of the wireless router being 
used. Encryption is required when playing 
back video, etc., from DLNA compatible 
devices.
F99
¾The unit fails to operate properly. Press [ Í/I] 
on the main unit for 3 seconds to switch the 
unit to standby, then switch back on.
HDMI ONLY
¾ Some BD-Video discs can only be output with 
HDMI.
NET
¾While connecting to a network.
No PLAY
¾There is a viewing restriction on a BD-Video 
or DVD-Video. (> 29)
No READ
¾The media is dirty or badly scratched. The 
unit cannot play.
PLEASE WAIT
¾The unit is carrying out an internal process. 
This is not a malfunction. You cannot operate 
the unit while “PLEASE WAIT” is displayed.
REMOVE
¾The USB device is drawing too much power. 
Remove the USB device.
SET   (“   ” stands for a number.)
¾ The remote control and main unit are using 
different codes. Change the code on the 
remote control.
Press and hold [OK] and the 
indicated number button at 
the same time for more than 
5 seconds.
On the television
On the unit’s display
DMP-BDT220_VQT3V20_eng.book  34 ページ  ２０１１年１２月５日　月曜日　午後５時３５分 
						

							Reference
35VQT3V20
U59
¾The unit is hot.
The unit switches to standby for safety 
reasons. Wait for about 30 minutes until the 
message disappears.
Select a position with good ventilation when 
installing the unit.
H  or F
(“    ” stands for a number.)
¾ There is something unusual.
¾ Check the unit using the troubleshooting 
guide. If the service number remains 
displayed, do the following.
1 Disconnect the plug from the AC outlet, wait a 
few seconds, then reconnect it.
2 Press [ Í/I] to turn the power on.
If the service number remains displayed despite 
doing the above, request se rvice from the dealer. 
Inform the dealer of the service number when 
requesting service.
START
¾ The system is being restarted during the 
firmware update. Please do not turn off the 
unit.
UPD /
(“    ” stands for a number.)
¾ The firmware is being updated.
Please do not turn off the unit.
FINISH
¾The firmware update is complete.
DMP-BDT220_VQT3V20_eng.book  35 ページ  ２０１１年１２月５日　月曜日　午後５時３５分 
						

							36VQT3V20
Supplemental 
infor mation
∫Display languages list
∫ Language code list
Precautions of Wireless 
LAN connection
The following limits are in place regarding the 
usage of this unit. You must be aware of these 
limits before using this unit.
Panasonic will in no way be responsible for any 
incidental damage which may arise due to a 
failure to obey these limits, or to any condition of 
use or disuse of this unit.
≥Data transmitted and received over radio 
waves may be intercepted and monitored.
≥ This unit contains delicate electronic 
components.
Please use this unit in the manner in which it 
was intended and follow the following points:
– Do not expose this unit to high temperatures 
or direct sunlight.
– Do not bend, or subject this unit to strong 
impacts.
– Keep this unit away from moisture.
– Do not disassemble or alter this unit in any way.
DisplayLanguageDisplayLanguageDisplayLanguage
LanguageCodeLanguageCodeLanguageCode
ENG
FRA
DEU
ITA
ESP
NLD
SVE
NOR
DAN
POR
RUS English
French
German
Italian
Spanish
Dutch
Swedish
Norwegian
Danish
Portuguese
Russian ARA  
HIN
PER
IND
MRI
BUL
RUM
GRE
TUR 
JPN
CHI
KOR
MAL
VIE
THA
POL
CES
SLK
HUN
FIN Japanese
Chinese
Korean
Malay
Vietnamese
Thai
Polish
Czech
Slovak
Hungarian
FinnishArabic
Hindi
Persian
Indonesian
Maori
Bulgarian
Romanian
Greek
Turkish
Others
Abkhazian: 6566
Afar: 6565
Afrikaans: 6570
Albanian: 8381
Amharic
:6577
Arabic: 6582
Armenian: 7289
Assamese: 6583
Aymara: 6589
Azerbaijani: 6590
Bashkir: 6665
Basque: 6985
Bengali; Bangla: 6678
Bhutani: 6890
Bihari: 6672
Breton: 6682
Bulgarian: 6671
Burmese: 7789
Byelorussian: 6669
Cambodian: 7577
Catalan: 6765
Chinese: 9072
Corsican: 6779
Croatian: 7282
Czech: 6783
Danish: 6865
Dutch: 7876
English: 6978
Esperanto: 6979
Estonian: 6984
Faroese: 7079
Fiji: 7074
Finnish: 7073
French: 7082
Frisian: 7089
Galician: 7176
Georgian: 7565
German: 6869
Greek: 6976
Greenlandic: 7576
Guarani: 7178 Gujarati: 7185
Hausa: 7265
Hebrew: 7387
Hindi: 7273
Hungarian: 7285
Icelandic: 7383
Indonesian: 7378
Interlingua: 7365
Irish:
7165
Italian: 7384
Japanese: 7465
Javanese: 7487
Kannada: 7578
Kashmiri: 7583
Kazakh: 7575
Kirghiz: 7589
Korean: 7579
Kurdish: 7585
Laotian: 7679
Latin: 7665
Latvian, Lettish: 7686
Lingala: 7678
Lithuanian: 7684
Macedonian: 7775
Malagasy: 7771
Malay: 7783
Malayalam: 7776
Maltese: 7784
Maori: 7773
Marathi: 7782
Moldavian: 7779
Mongolian: 7778
Nauru: 7865
Nepali: 7869
Norwegian: 7879
Oriya: 7982
Pashto, Pushto: 8083
Persian: 7065
Polish: 8076
Portuguese: 8084
Punjabi: 8065
Quechua: 8185 Rhaeto-Romance:
8277
Romanian: 8279
Russian: 8285
Samoan: 8377
Sanskrit: 8365
Scots Gaelic: 7168
Serbian: 8382
Serbo-Croatian: 8372
Shona: 8378
Sindhi: 8368
Singhalese: 8373
Slovak: 8375
Slovenian: 8376
Somali: 8379
Spanish: 6983
Sundanese: 8385
Swahili: 8387
Swedish: 8386
Tagalog: 8476
Tajik: 8471
Tamil: 8465
Tatar: 8484
Telugu: 8469
Thai: 8472
Tibetan: 6679
Tigrinya: 8473
Tonga: 8479
Turkish: 8482
Turkmen: 8475
Twi: 8487
Ukrainian: 8575
Urdu: 8582
Uzbek: 8590
Vietnamese: 8673
Volapük: 8679
Welsh: 6789
Wolof: 8779
Xhosa: 8872
Yiddish: 7473
Yo r u b a : 8 9 7 9
Zulu: 9085
DMP-BDT220_VQT3V20_eng.book  36 ページ  ２０１１年１２月５日　月曜日　午後５時３５分 
						

							Reference
37VQT3V20
Specifications
≥Specifications are subject to change without notice. ≥
With certain recording states and folder structures, the play 
order may differ or playback may not be possible.
(Continued on the next page.)
Signal system NTSC
Operating 
temperature rangei
5  oC to i 35 oC 
( i 41  oF to  i95  oF)
Operating humidity 
range  10 % to 80 % RH 
(no condensation)
Video output
Output level: 1.0 Vp-p (75 ≠)
Output connector: 
Pin jack (1 system)
Audio outputOutput level: 2 Vrms (1 kHz, 0 dB)Output connector: Pin jack
Number of connectors:
2 channel
1system
Digital audio output Optical digital output 
(Optical terminal)
HDMI AV outputOutput connector: 
Type A (19 pin) 1 system
SD card slot1system
USB slotUSB2.0
2system
Ethernet10BASE-T/100BASE-TX 
1system
Wireless LAN Standard Compliance: 
IEEE802.11 b/g/n
Frequency range:
2.4 GHz band
Security: 
WPA
TM/WPA2TM 
(Encryption Type: TKIP/AES, Authentication Type: PSK), WEP (64 bit/128 bit)
LASER Specification Class  I LASER Product
Wave length: 790 nm (CDs)/
660 nm (DVDs)/405 nm (BDs)
Laser power:  No hazardous 
radiation is emitted with the 
safety protection
Power supply AC 120 V, 60 Hz
Power consumptionApprox. 8.9 W
Power consumption 
in standby modeApprox. 0.1 W
Power consumption 
in quick start 
standby modeApprox. 3.2 W
Dimensions 
(W
kHk D)
Including the 
projecting parts 430 mmk
38 mmk185 mm
(Approx. 16 15/16 zk1 1/2zk
7 5/16 z)
Mass (Weight) Approx. 1.5 kg (3.3 lbs)
File format
File formatExtensionReference
MP3“.MP3”, “.mp3”
This unit supports ID3 tags, 
but only titles, artist names 
and album names can be 
displayed.
JPEG “.JPG”, “.jpg”
≥MOTION JPEG and 
Progressive JPEG is not 
supported
≥ You may not be able to 
play back the file if you 
have edited the folder 
structure or the file name 
on a PC or other device.
MKV “.MKV”, “.mkv”
≥
The video file and 
subtitles text file are 
inside the same folder, 
and the file names are 
the same except for the 
file extensions.
≥ Some MKV file may not 
be played back, 
depending on the video 
resolution and frame rate 
condition.
Subtitles text 
file
“.SRT”, “.srt”, 
“.SSA”, “.ssa”, 
“.ASS”, “.ass”
FLAC “.flac”Maximum sampling rate:
192 kHz/24 bit
WAV“.wav”Maximum sampling rate:
48 kHz/16 bit
MPO “.mpo”3D still picture
DMP-BDT220_VQT3V20_eng.book  37 ページ  ２０１１年１２月５日　月曜日　午後５時３５分 
						

							38VQT3V20
The audio output differs depending on which 
terminals are connected to the amplifier/receiver, 
and the settings on the unit. (>26, Digital Audio 
Output)
≥ The number of channels listed is the maximum possible 
number of output channels  when connected to amplifier/
receiver compatible with the respective audio format.
*1When “BD-Video Secondary Audio” is set to “On”, the audio will 
be output as Dolby Digital, DTS Digital Surround or 5.1ch PCM.
*2The maximum possible number of Dolby sound is 5.1ch PCM.*3The audio output is amplified from 5.1ch or 6.1ch to 7.1ch 
depending on the DTS, Inc. specifications.
Audio information
Te r m i n a l“Digital Audio Output”
“Bitstream”“PCM”
HDMI AV 
OUT Outputs using 
original audio*1BD-Video : 7.1ch PCM*1*2*3
DVD-Video : 5.1ch PCM
OPTICAL
Dolby Digital/
DTS Digital 
Surround
Down-mixed 2ch PCM
Restriction on use of 
unauthorized copied content
This unit adopts the following technology for 
copyright protection.
Cinavia Notice 
This product uses Cinavia technology to limit 
the use of unauthorized copies of some 
commercially-produced film and videos and 
their soundtracks. When a prohibited use of an 
unauthorized copy is detected, a message will 
be displayed and playback or copying will be 
interrupted. 
More information about Cinavia technology is 
provided at the Cinavia Online Consumer 
Information Center at http://www.cinavia.com.
 
To request additional information about Cinavia 
by mail, send a postcard with your mailing 
address to: 
Cinavia Consumer Information Center, P.O. 
Box 86851, San Diego, CA, 92138, USA. 
DMP-BDT220_VQT3V20_eng.book  38 ページ  ２０１１年１２月５日　月曜日　午後５時３５分 
						

							Reference
39VQT3V20
“AVCHD”, “AVCHD 3D”, “AVCHD Progressive” and “AVCHD 3D/Progressive” are trademarks of Panasonic Corporation and 
Sony Corporation.
Java is a registered trademark of Oracle and/or its affiliates.
VIERA Connect is a trademark of Panasonic Corporation.
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
“Wi-Fi”, “Wi-Fi Protected Setup”, “Wi-Fi Direct”, “WPA” and “WPA2” are marks or registered marks of the Wi-Fi Alliance.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; \
6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 
7,212,872 & other U.S. and worldwide patents issued & pending. DTS-HD, t\
he Symbol, & DTS-HD and the Symbol together are 
registered trademarks & DTS-HD Master Audio | Essential is a trademark o\
f DTS, Inc. Product includes software. © DTS, Inc. All 
Rights Reserved.
This item incorporates copy protection technology that is protected by U\
.S. patents and other intellectual property rights of R ovi 
Corporation. Reverse engineering and disassembly are prohibited.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are tradem\
arks or registered trademarks of HDMI 
Licensing LLC in 
the United States and other countries.
This product is licensed under the AVC patent portfolio license and VC-1\
 patent portfolio license for the personal and non-comm ercial 
use of a consumer to (i) encode video in compliance with the AVC Stand\
ard and VC-1 Standard (“AVC/VC-1 Video”) and/or (ii) 
decode AVC/VC-1 Video that was encoded by a consumer engaged in a person\
al and non-commercial activity and/or was obtained 
from a video provider licensed to provide AVC/VC-1 Video. No license is \
granted or shall be implied for any other use. Addition al 
information may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.
HDAVI Control™ is a trademark of Panasonic Corporation.
VIERA Link™ is a trademark of Panasonic Corporation.
EZ Sync™ is a trademark of Panasonic Corporation.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Th\
omson.
SDXC Logo is a trademark of SD-3C, LLC.
“DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation\
.
DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or\
 certification marks of the Digital Living Network 
Alliance.
Windows is a trademark or a registered trademark of Microsoft Corporatio\
n in the United States and other countries.
Skype, associated trade marks and logos and the “      ” logo are \
trade marks of Skype Limited.
DMP-BDT220_VQT3V20_eng.book  39 ページ  ２０１１年１２月５日　月曜日　午後５時３５分 
						

							40VQT3V20
This product incorporates the following software:
(1) the software developed independently by or for Panasonic Corporation,
(2) the software owned by third party and licensed to Panasonic Corporation,
(3) the software licensed under the GNU General Public License, Version 2 (GPL v2),
(4) the software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL v2.1) and/or,
(5) open sourced software other than the software licensed under the GPL v2 and/or LGPL v2.1
For the software categorized as (3) and (4), please refer to the terms and conditions of GPL v2 and LGPL v2.1, as the case may be at
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html and
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
In addition, the software categorized as (3) and (4) are copyrighted by several individuals. Please refer to the copyright noti ce of those 
individuals at
http://panasonic.net/avc/oss/bdplayer/AWBPP12.html
The GPL/LGPL software is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied 
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
At least three (3) years from delivery of products, Panasonic will give to any third party who contacts us at the contact infor mation 
provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readab le 
copy of the corresponding source code covered under GPL v2/LGPL v2.1.
Contact Information
[email protected]
Source code is also freely available to you and any other member of the public via our website below.
http://panasonic.net/avc/oss/bdplayer/AWBPP12.html
For the software categorized as (5) includes as follows.
1. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)
2. This product includes software developed by the University of California, Berkeley and its contributors.
3. FreeType code.
4. The Independent JPEG Groups JPEG software.
gSOAP Public License 1.3
Part of the software embedded in this product is gSOAP software.
Portions created by gSOAP are Copyright (C) 2001-2009 Robert A. van Engelen, Genivia inc. All Rights Reserved.
THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED  BY GENIVIA INC AND ANY EXPRESS OR IMPLIED WARRANTIES, 
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIE S OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTH OR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE 
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LI ABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
(1) MS/WMA
This product is protected by certain intellectual property rights of Microsoft Corporation and third parties.  Use or distribut ion of such 
technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary.
(2) MS/PlayReady/Final Product Labeling
This product contains technology subject to certain intellectual  property rights of Microsoft. Use or distribution of this technology outside 
of this product is prohibited without the appropriate license(s) from Microsoft.
(3) MS/PlayReady/End User Notices
Content owners use Microsoft PlayReady
TM content access technology to protect their intellectual property, including copyrighted 
content. This device uses PlayReady technology to access Play Ready-protected content and/or WMDRM-protected content. If the 
device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device’s abi lity to 
consume PlayReady-protected content. Revocation should not affect  unprotected content or content protected by other content access 
technologies. Content owners may require you to upgrade PlayReady to access their content. If y ou decline an upgrade, you will not be 
able to access content that requires the upgrade.
(4) Vorbis
The software license is displayed when “License” in the Setup menu is selected. (>30)
(5) FLAC
The software license is displayed when “License” in the Setup menu is selected. (>30)
Copyright 2004-2010 Verance Corporation. CinaviaTM is a Verance Corporation trademark. Protected by U.S. Patent 7,369,677 and 
worldwide patents issued and pending under license from Verance Corporation. All rights reserved.
DMP-BDT220_VQT3V20_eng.book  40 ページ  ２０１１年１２月５日　月曜日　午後５時３５分