Panasonic Dmp Bdt100 Operating Instruction

							Connections & Settings
11VQT2U33
STEP 3 : Connecting to a broadband network
The following services can be used when this unit is 
connected to broadband.
≥Firmware can be updated  (> 15)
≥ You can enjoy BD-Live ( >19)
≥ You can enjoy VIERA CAST ( >24) For details about connection method, refer to the 
instructions supplied with the connected equipment.
≥
The unit is not compatible with public wireless LAN 
services provided in airports, stations, cafes etc.
∫ Using LAN (ethernet) cable ∫Using Wireless LAN Adaptor DY-WL10 
(optional)
≥Use shielded LAN cables w hen connecting to peripheral 
devices.
≥ Inserting any cable other than a LAN cable in the LAN 
terminal can damage the unit. ≥
Only the Wireless LAN Adaptor DY-WL10 (optional) can 
be used.
≥ Read the operating instructions for the Wireless LAN 
Adaptor DY-WL10 (optional) thoroughly when using it.
≥ For up to date compatibility information on your Wireless 
router (Access Point) refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
For additional information about this unit refer to 
http://www.panasonic.com/consumer/support (For 
U.S.A.)
Broadband router, etc. LAN Cable
LAN Cable
Modem 
(Broadband)
*Provided by ISP
Wireless router 
(Access point), etc.
Wireless LAN Adaptor
LAN Cable
Modem (Broadband)
*Provided by ISP
Front of the unit
Pull to flip down 
the front panel.
DMP-BDT100_VQT2U33_eng.book  11 ページ  ２０１０年６月９日　水曜日　午後４時５９分 
						

							12VQT2U33
STEP 4 : Connecting to 
an AC power
≥This unit consumes a small amount of AC power (“Quick 
Start”: “Off”, approx. 0.1 W) even when turned off. In the 
interest of power conservation, if you will not be using this 
unit for an extended period of time, it can be disconnected.
STEP 5 : Setting
After connecting your new player for the 1st time and 
pressing the power button, a screen for the basic settings 
will appear.
PreparationTurn on the television and select the appropriate video 
input on the television.
1Press [ ÍPOWER].
Setup screen appears.
If this unit is connected to a Panasonic TV (VIERA) 
supporting HDAVI Control 2 or later via an HDMI cable, 
then the setting information on the TV is acquired by this 
TV.
2Follow the on-screen instructions and 
make the settings with [ 3,4] and press 
[OK].
After completing “Easy Setting”, you can perform “Network 
Easy Setting”.
	≥ You can perform this setup anytime by selecting “Easy Setting” in the 
Setup menu. (>31)
The unit should be installed near an accessible AC 
power outlet, with the power cord connected directly to it.
To completely disconnect power from the unit, unplug 
the power cord from the AC power outlet.
AC power supply cord 
(supplied)
To a household AC outlet
Easy Setting
DMP-BDT100_VQT2U33_eng.book  12 ページ  ２０１０年６月７日　月曜日　午後１時２８分 
						

							Connections & Settings
13VQT2U33
After completing “Easy Setting”, you can continuously 
perform “Network Easy Setting”.
1Select “Wired” or “Wireless” and press 
[OK].
If “Wireless LAN Adaptor is not connected.” is displayed, 
check that the Wireless LAN Adaptor is fully inserted. 
Alternatively, disconnect and reconnect it. If there is still no 
change in the display, consult your dealer.
2Follow the on-screen instructions and 
make the settings with [ 3,4, 2,1] and 
press [OK].
For wireless LAN connection:
If you are using a Wireless router (Access point) that 
supports WPS, you can easily  perform the settings by 
selecting “WPS (PUSH button method)”.
Otherwise, perform the settings by selecting “Search for 
access point” or “Manual setting” in “Other methods”.
≥ WPS (Wi-Fi Protected Setup) is a function that facilitates 
settings relating to the connection and security of wireless 
LAN devices. To see whether your Wireless router 
(Access point) supports WPS, check the Wireless router 
operating instructions. Access Point Connection Setting
Network Easy Setting
OKRETURN
Network Easy Setting (Connection Check)
Wired
Wireless
Select a connection mode. 
 Current setting  :  Wired
 
LAN cable connection:
 Connect a LAN cable to the unit and select Wired.
Wireless LAN connection:
 Connect the Wireless LAN Adaptor (DY-WL10) to the USB 
 port and select Wireless.
OKRETURN
Access Point Connection Setting
Select a connection method to use with an access point 
of Wireless LAN.
Please refer to the operating instructions of the access
point about connection methods.
WPS (PUSH button method)
Other methods
p
WPS (PIN code method)
Search for access point
Manual setting
When you experience 
problems with settings
DisplayCheck the following
A conflict with another 
device occurred. ≥
Please wait a few moments, 
and then try again.
A time out error 
occurred. ≥
Setting of the Wireless router 
(Access point) for MAC 
Address etc.
≥ The signal may be weak. 
Using the USB extension 
cable supplied with the 
Wireless LAN Adaptor, adjust 
the position of the Wireless 
LAN Adaptor.
≥ The SSID ( >14) and the 
encryption key of the Wireless 
router (Access point).
≥ Please wait a few moments, 
and then try again.
An authentication error 
or a time out error 
occurred.
A device error occurred.
≥
Connection of Wireless LAN 
Adaptor
If there is no improvement in 
symptom, contact our 
Customer Service Center.
OK
Access Point Connection Setting
Failed to connect to the access point.
A conflict with another device occurred.
Do you want to configure Access Point Connection
Setting again ?
Yes No
DMP-BDT100_VQT2U33_eng.book  13 ページ  ２０１０年６月７日　月曜日　午後１時２８分 
						

							14VQT2U33
Network Easy Setting (Connection Check)
Network Easy Setting (Internet Connection Check)
	≥Refer to the operating instructions of the hub or router.
≥ You can perform this setup anytime by selecting “Network Easy Setting” 
in the Setup menu. (
>31)
≥ You can redo these settings individually using “Network Settings”. 
(
>31)
≥ Do not use this device to connect to any wireless network for which you 
do not have usage rights.
During automatic searches in a wireless network environment, 
wireless networks (SSID*) for which you do not have usage rights 
may be displayed; however, using these networks may be regarded 
as illegal access.
≥ After performing network settings on this unit, the settings (encryption 
level, etc.) of the Wireless router (Access point) might change. When 
you have trouble getting online on your PC, perform the network 
settings on your PC in accordance with the settings of Wireless router 
(Access point).
≥ Please be aware that connecting to a network without encryption may 
result in the content of the communication being illegitimately viewed by 
a third party, or the leaking of data such as personal or secret 
information.
* An SSID (Service Set IDentification) is a name used by wireless LAN 
to identify a particular network. Transmission is possible if the SSID 
matches for both devices.
DisplayCheck the 
following
1. LAN cable connection or  
Connection to access point :Fail≥
Connection of 
the LAN 
cables ( >11 )
2. IP address setting : Fail
3. Connection to gateway : Fail
1. LAN cable connection or  
Connection to access point :Pass≥
Connection 
and settings 
of the hub and 
router
≥ Settings of “IP 
Address/DNS 
Settings” 
(> 31)
2. IP address setting : Fail
3. Connection to gateway : Fail
1. LAN cable connection or
 
Connection to access point :Pass
2. IP address setting : Pass
3. Connection to gateway : Fail
DisplayCheck the following
Cannot find the server.
(Error code: B019) ≥
“Primary DNS” and “Secondary 
DNS” settings of “IP Address/
DNS Settings” ( >31)
Failed to connect to 
the server.
(Error code: B020) ≥
The server may be busy or the 
service may have been 
suspended. Please wait a few 
moments, and then try again.
≥ Settings of “Proxy Server 
Settings” ( >31) and the router
OK
Network Easy Setting (Connection Check)
YesNo
Complete.
1. LAN cable connection         
2. IP address setting
3. Connection to gateway
LAN cable is not connected.
Please check the connection.
Select “Yes” and press [OK] to check network
connection again. Select “No” and press [OK]
to finish Network Easy Setting.
: Fail
: Fail
: Fail
OK
Network Easy Setting (Internet Connection Check)Complete.
- Connection to the Internet       :   Fail(Error code: B019)
Failed the connection test.
Cannot find the server.(Error code: B019)
Please refer to the operating instructions for the cause
of the error and the solution for it.
Press [OK].
DMP-BDT100_VQT2U33_eng.book  14 ページ  ２０１０年５月１９日　水曜日　午後２時３６分 
						

							Connections & Settings
15VQT2U33
Occasionally, Panasonic may release updated firmware for 
this unit that may add or improve the way a feature 
operates. These updates are available free of charge.
This unit is capable of checking the firmware automatically 
when connected to the Internet via a broadband connection.
When a new firmware version is available, the following 
screen is displayed. 
To update the firmware
Press [FUNCTION MENU]  > select “Other Functions”  > 
[OK]  > select  “Setup”  > [OK]  > select “Others”  > [OK] 
>  select “Firmware Update”  > [OK]  > select “Update 
Now”
DO NOT DISCONNECT the unit from the AC power or 
perform any operation while the update takes place.
After the firmware is installed, “FINISH” will be displayed on 
the unit’s display. Unit will restart and the following screen 
will be displayed.
	≥ If downloading on this unit fails or this unit is not connected to the 
Internet, then you can download the latest firmware from the 
following website and burn it to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. (
>31, “System 
Information”)
≥ Downloading will require several minutes. It may take longer or the 
Internet may not be connected depending on the connection 
environment. 
≥ If you do not want to check for the latest firmware version, set 
“Automatic Update Check” to “Off”. (
>31)
STEP 6 : 
Reprogramming the 
remote control
Change “Remote Control Code” ( >31) on the main unit and 
the remote control (the two must match) if you place other 
Panasonic products close together and it responds to this 
remote control.
You can operate the TV or amplifier/receiver using the unit’s 
remote control.
1For televisions
Input the code (>40) with the number 
buttons while pressing [ ÍTV POWER]. 
For amplifiers/receivers
Input the code (>40) with the number 
buttons while pressing 
[RECEIVER jVOL].
e.g., 0001: [0]  B [0] B [0] B [1] 
2Test by turning on the television or 
adjusting the volume  of the amplifier/
receiver.
	≥ If your television or amplifier/receiver brand has more than one code 
listed, select the one that allows correct operation.
Firmware updates
The latest firmware is available.
Please update firmware in Setup.
The firmware was updated.Current Installed Version: x.xx
RETURNOK
For other Panasonic products
For TV or amplifier/receiver
DMP-BDT100_VQT2U33_eng.book  15 ページ  ２０１０年６月１５日　火曜日　午前１１時５１分 
						

							16VQT2U33
Playb ack
Inserting or removing 
media
≥When inserting a media item, ensure that it is facing the 
right way up.
≥ When the indicator on this unit’s display blinks, do not turn 
off the unit or remove the media. Such action may result in 
loss of the media’s contents.
≥ When removing the SD card, press on the center of the 
card and pull it straight out.
≥ If you connect a Panasonic product with a USB 
connection cable, the setup screen may be displayed on 
the connected equipment. For details, refer to the 
instructions for the connected equipment.
∫ To switch drives
Press [DRIVE SELECT] to select “BD/DVD/CD”, “SD 
card” or “USB device”.
≥If media is inserted while the unit is stopped, the drive 
switches automatically depending on the inserted media.
FUNCTIONS menu
Major functions of this unit can be operated from the 
FUNCTIONS menu.
Press [ 3,4 ] to select the item and press [OK].
To exit the screen
Press [FUNCTION MENU].
	≥ Items to be displayed may vary with the media.
≥ If FUNCTIONS screen is not displayed, press [FUNCTION MENU].
PlaybackPlay back the contents.
To p  M e n u(> 17)
Menu(> 17)
Viewing Picture(> 22)
Viewing Video(> 17)
Listening Music(> 23)
NetworkDisplays the Home screen of 
the VIERA CAST ( >24)
BD/DVD/CD
Switches to each drive.SD Card
USB device
Other 
Functions Playlists
You can play playlists created 
on DVD-VR.
Setup
( > 28)
Card 
Management
( > 19)
Playback
Top Menu
USB device
SD Card
Blu-ray Disc Player
FUNCTIONS
BD-Video
Other Functions
Network
OKRETURN
DMP-BDT100_VQT2U33_eng.book  16 ページ  ２０１０年５月２７日　木曜日　午前１１時２分 
						

							Playback
17VQT2U33
Playing video contents
Preparation
Turn on the television and select the appropriate video input 
on the television.
1Press [ÍPOWER] to turn on the unit.
2Insert the media.
Play starts.
≥If the menu is displayed, press [ 3,4 ,2, 1] to select 
the item and press [OK].
≥ When a message screen is displayed while playing 
back 3D compatible video software, play back in 
accordance with the instructions.
≥ If play does not start, press [ 1](PLAY).
∫ To show menus
You can show Top Menu, Direc t Navigator or Pop-up Menu.
Press [TOP MENU/DIRECT NAVIGATOR] or [POP-UP 
MENU].
≥ Press [ 3,4,2 ,1] to select the item and press [OK].
≥ Pop-up menu also appears by pressing [SUB MENU] and 
selecting “Pop-up Menu”.
∫ To show the status messages
While playing, press [STATUS].
The status messages give you information about what is 
currently being played. Each time you press [STATUS], the 
information displayed will change.
	≥DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. 
Press [∫] when you finish to preserve the unit’s motor and your 
television screen.
≥ Depending on media and contents, the display may change or may not 
appear.
≥ DivX: Successive play is not possible.
≥ When a menu is displayed at the time a 1080/60p (1920 k1080/60 
progressive) video recorded by a Panasonic digital high-definition video 
camera is played back, select “Play Video (AVCHD)”.
≥ It is not possible to playback AVCHD and MPEG2 video which have 　
been dragged and dropped, copied and pasted to the media.
These functions may not work depending on the media and 
contents.
Press [ ∫].
The stopped position is memorized.
Resume play function
Press [ 1] (PLAY) to restart from this position.
≥ The position is cleared if the tray is opened or you press 
[∫ ] several times to display “STOP” on the unit’s display.
≥ On BD-Video discs including BD-J ( >43), the resume 
play function does not work.
Press [ ;].
≥ Press [ ;] again or [ 1] (PLAY) to restart play. 
Search
While playing, press [ 6] or [ 5].
≥ Music and MP3: The speed is fixed to a single step.
Slow-motion
While paused, press [ 6] or [ 5].
≥ BD-Video and AVCHD: Forward direction [ 5] only.
The speed increases up to 5 steps.
≥ Press [ 1] (PLAY) to revert to normal playback speed.
While playing or paused, press [ :] or [9 ].
Skip to the title, chapter or track you want to play.
≥ Each press increases the number of skips.
While paused, press [ 2] (2;) or [ 1] (;1).
≥ Press and hold to change in succession forward or 
backward.
≥ Press [ 1] (PLAY) to revert to normal playback speed.
≥ BD-Video and AVCHD: Forward direction [ 1] (;1 ) only.
Press [AUDIO].
You can change the audio channel number or soundtrack 
language ( >26), etc.BDDVDCDSDUSB
1
PlayBD-Video T1     C1     0:05.140:20.52
e.g.BD-Video
To t a l  t i m e
Elapsed time in the title
Current position
T: Title, C: Chapter, PL: Playlist
Other operations during play 
Stop
Pause
Search/Slow-motion
Skip
Frame-by-frame
Changing audio
DMP-BDT100_VQT2U33_eng.book  17 ページ  ２０１０年６月４日　金曜日　午前１１時４４分 
						

							18VQT2U33
1Press [SUB MENU].
2Select an item, then press [OK].
≥Depending on the played contents if you perform “Screen 
Aspect”, there may be no effect.
≥ When “TV Aspect” (> 30) is set to “4:3 Pan & Scan” or 
“4:3 Letterbox”, the “Zoom” effect in “Screen Aspect” is 
disabled. 
	≥ Depending on the media and contents, displayed items are different.
Useful functions
While Direct Navigator screen is displayed
PropertiesTo display the titles properties (recording 
date, etc.).
View 
ChaptersTo select the chapter.
To  p i c t u r ePlaying still pictures ( >22).
Select 
FolderTo switch to another folder.
While playing
Screen 
AspectWhen black bars are shown at the top, 
bottom, left, and right sides of the screen, 
you can enlarge the image to fill the screen.
Top MenuTo display Top Menu.
Pop-up 
MenuTo display Pop-up Menu.
MenuTo display Menu.
DMP-BDT100_VQT2U33_eng.book  18 ページ  ２０１０年５月１９日　水曜日　午後２時３６分 
						

							Playback
19VQT2U33
What is BONUSVIEW?
BONUSVIEW allows you to enjoy functions such as 
picture-in-picture or secondary audio etc.
What is BD-Live?
In addition to the BONUSVIEW function, BD-Live allows you 
to enjoy more functions such as subtitles, exclusive images 
and online games by connecting this unit to the Internet.
≥The usable functions and the operating method may vary 
with each disc, please refer to the instructions on the disc 
and/or visit their website.
To turn on/off secondary video
Press [PIP].
To turn on/off secondary audio
[DISPLAY] >  select “Disc” > [1] >  select 
“Signal Type” > [OK] > set “Soundtrack” in 
“Secondary Video” to
 “On” or “Off”
	≥ During search/slow-motion or frame-by-frame, only the primary video is 
displayed.
≥ When “BD-Video Secondary Audio” in “Digital Audio Output” is set to 
“Off”, secondary audio will not be played (
>29).
Some BD-Live content available on the Blu-ray discs may 
require an Internet account to  be created in order to access 
the BD-Live content. Follow the screen display or instruction 
manual of the disc for information on acquiring an account.
1Connect to the network. (>11 )
2Insert an SD card (with 1 GB or more free space).
SD card is used as the local storage ( >43).
3Insert the disc.
∫Deleting data/Formatting SD cards
There are various functions in BD-Video that you can enjoy 
by copying data to the SD card. (Local Storage) If you no 
longer need data recorded on the SD card, you can delete 
data with the following operation.
1 Insert an SD card.
2 Press [FUNCTION MENU].
3 Press [ 3,4] to select “Other Functions” and press 
[OK].
4 Press [ 3,4] to select “Card Management” and press 
[OK].
5 Press [ 3,4] to select “BD-Video Data Erase” or 
“Format SD Card” and press [OK].
6 Press [ 2,1] to select “Yes” and press [OK].
7 Press [ 2,1] to select “Start” and press [OK].
	≥ To use the above functions, it is recommended that you format the card 
on this unit. If the SD card you use is formatted, all data on the card will 
be erased. It cannot be recovered.
≥ “BD-Live Internet Access” may need to be changed for certain discs 
(
>28).
≥ When discs supporting BD-Live are played back, the player or disc IDs 
may be sent to the content provider via the Internet.
Enjoying BD-Live or 
BONUSVIEW in BD-Video
Playing picture-in-picture
Secondary video
Primary video
Enjoying BD-Live discs with 
Internet
Card Management No. of Files    6
Free space    300 MB
SD card
Format this SD Card.
BD-Video Data Erase
Format SD Card
OKRETURN
DMP-BDT100_VQT2U33_eng.book  19 ページ  ２０１０年５月２７日　木曜日　午前１１時２分 
						

							20VQT2U33
ABOUT DIVX VIDEO:
DivX® is a digital video format created by DivX, Inc. This is 
an official DivX Certified device that plays DivX video. Visit 
www.divx.com for more information and software tools to 
convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified
® device must be registered in order to 
play DivX Video-on-Demand (VOD) content. 
To generate the registration code, locate the DivX VOD 
section in the device setup menu. 
Go to vod.divx.com with this code to complete the 
registration process and learn more about DivX VOD.
≥ Video images of the copyright-protected DivX contents 
stored on USB device can be output only through the 
HDMI output terminal.
Display the unit’s registration code.
(> 31, “DivX Registration” in “Others”)
≥ After playing DivX VOD content for the first time, the 
registration code is not displayed.
≥ If you purchase DivX VOD content using a registration 
code different from this unit’s code, you will not be able to 
play this content. (“Authorization Error” is displayed.)
Cancel the unit’s registration.
(> 31, “DivX Registration” in “Others”)
Press [ 2,1] to select “Yes” in “DivX Registration”.
Use the deregistration code to cancel the registration in 
www.divx.com.
Regarding DivX VOD content that can only be played a 
set number of times
Some DivX VOD contents can only be played a set number 
of times. When you play this content, the number of times 
already played and initially playable number of times is 
displayed.
≥ The remaining number of plays decreases each time a 
program is played. However, when playing from the point 
where play was previously stopped, the remaining number 
of plays does not decrease due to the resume play 
function.
∫ Displaying subtitle text
You can display subtitle text on the DivX video disc with this 
unit. This function has no relation to the subtitles specified in 
DivX standard specifications  and has no clear standard. 
The operation might be different or it may not operate 
properly depending on the way the file was made or the 
state of this unit (playing, stopped, etc.).
Set “Subtitle” in “Disc” ( >26)
	≥DivX video files that do not display “Text” do not contain subtitle text.
≥ If the subtitle text is not displayed correctly, try changing the language 
settings. (
>28)
Regarding DivX
DivX Registration
The registration code is necessary to
register this unit to play protected
DivX videos.
Registration Code: XXXXXXXXXX
Please register at www.divx.com/vod/
10 alphanumeric 
characters
DMP-BDT100_VQT2U33_eng.book  20 ページ  ２０１０年５月２６日　水曜日　午前１０時５分