Panasonic Dmp Bd93 Owners Manual

SQW0274
until 
2015/01/16
2ZQHU

- 2 -
IMPORTANT SAFETY 
INSTRUCTIONS
Read these operating instructions carefully before using the unit. 
Follow the safety instructions on the unit and the applicable safety 
instructions listed below. Keep these operating instructions handy for 
future reference.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance 
with the...

- 3 -
Precautions
Unit
To reduce the risk of fire, electric shock or product damage,
≥Do not expose this unit to rain, moisture, dripping or splashing.
≥Do not place objects filled with liquids, such as vases, on this unit.
≥Use only the recommended accessories.
≥Do not remove covers.
≥Do not repair this unit by yourself. Refer servicing to qualified 
service personnel.
AC power supply cord
≥The power plug is the disconnecting device. Install this unit so that 
the power plug can be unplugged from the...

- 4 -
Table of contents
IMPORTANT SAFETY 
INSTRUCTIONS  . . . . . . . . . . .2
Precautions  . . . . . . . . . . . . . . . .3
Getting started
Accessories  . . . . . . . . . . . . . . . .5
Unit and media care . . . . . . . . . .5
Playable media. . . . . . . . . . . . . .6
Control reference guide . . . . . . .8
Connections and settings
Connecting to a TV  . . . . . . . . .10
Connecting to
an amplifier/receiver . . . . . . . .10
Connecting to the network . . . .11
Settings  . . . . . . . . . . . . . . . . ....

Getting started
- 5 -
Getting startedAccessories
Check the supplied accessories before using this 
unit.
1 Remote control
[BDT271/270] (N2QAYB001023)[BD903/93] (N2QAYB001024)
2 Batteries for remote control
1
[BDT271/270] AC power supply cord 
(K2CB2YY00092)
1
[BD903/93] AC adaptor
(SAE0001)
	≥Product numbers are provided in this Owner’s Manual 
correct as of December 2014. These may be subject to 
change.
≥Do not use AC power supply cord and AC adaptor with 
other equipment.
≥Do not use any other AC...

Getting started
- 6 -
Playable media
*1 [BDT271/270] only
*2 Canada only
≥See pages 7 and 32 for more information on the types of content that can be played.
DeviceMedia 
markingsDevice typesContents format
BD-Video Video
BD-REVideo, 
JPEG, MPO*
1, 
AAC, ALAC, DSD*1, 
FLAC, MP3, WAV, WMA
BD-RVideo, MKV, Xvid*
2, 
AAC, ALAC, DSD*1, 
FLAC, MP3, WAV, WMA
DVD-Video Video
DVD-R
Video, AVCHD, MKV, 
Xvid*
2, 
JPEG, MPO*1, 
AAC, ALAC, DSD*1, 
FLAC, MP3, WAV, WMA
DVD-R DL
DVD-RW
Video, AVCHD
— +R/+RW/+R DL
Music...

Getting started
- 7 -
∫Types of discs that cannot be 
played in this unit
Any other disc that is not specifically 
supported or previously described.
≥DVD-RAM
≥Super Audio CD
≥Photo CD
≥DVD-Audio
≥Video CD and Super Video CD
≥HD DVD
∫Region management information
The unit can play back BD-Video/DVD-Video 
discs of the following regions codes, including 
“ALL”:
≥The unit cannot playback discs in PAL format.
∫Finalize
Any DVD-R/RW/R DL, +R/+RW/+R DL and 
CD-R/RW that are recorded by a recorder need to 
be...

Getting started
- 8 -
Control reference guide
When other Panasonic devices respond to the 
remote control of the unit, change the remote 
control code. (>27)1 Turn the unit on and off
2 TV operation buttons
You can operate the Panasonic TV using this 
unit’s remote control. Some buttons may not 
work depending on the TV.
[ÍTV] : Turn the TV on and off
[AV] : Change input
[ijVOL] : Adjust the volume
3 Select title numbers, etc./Enter numbers or 
[BDT271/270] characters
4 Cancel
5 Basic playback control...

Getting started
- 9 -
1 Disc tray (>14)
2 USB port (>14)
3 POWER LED
The LED lights when the unit is turned on, 
and flashes when error occurs. (>31)
4 Remote control signal sensor
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20e up and down, 30e left and 
right5 Open or close the disc tray (>14)
6[BDT271/270] Stop (>16)
7
[BDT271/270] Start play (>16)
8Standby/on switch (Í/I) (>12)
Press to switch the unit from on to standby 
mode or vice versa. In standby mode, the unit 
still consumes a small...

- 10 -
Connections and settings
Conn ection s a nd settingsConnecting to a TV
Connect the power supply cord after making all connections.
≥Before making any connections, we recommend that you temporarily disconnect all the units from AC 
power outlet.
≥Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized. It is recommended 
that you use Panasonic’s HDMI cable. When outputting 1080p or 
[BDT271/270] 24p (4K) signal, please 
use HDMI cables 5.0 meters (16.4 ft.) or less.
≥This unit...