Panasonic Dmp Bd755 Owners Manual

							Playback
Settings
21VQT3A92
Settings
Playback menu
1Press [DISPLAY].
2Press [3,4] to select the menu and 
press [ 1].
3Press [ 3,4, 2,1] to select the item and 
press [ 1].
4Press [ 3,4] to select the setting.
Some items can be changed by pressing [OK].
To exit the screen
Press [DISPLAY].
Depending on the condition of the unit (playing, 
stopped, etc.) and media contents, there may be some 
items that you cannot select or change.
Regarding Language : ( >29)
Signal Type
Video
The recording method of original video appears.
Soundtrack
Show or change the soundtrack.
Subtitle
Turn the subtitle on/off, and change the language depending 
on the media.
Subtitle Style
Select the subtitle style.
Audio channel
Select the audio channel number.
(> 14, “Changing audio”)
Angle
Select the number of the angle.
	
≥Some items may be changed only on the disc specific menu. ( >14)
Repeat Play
(Only when the elapsed time is being displayed on the unit’s 
display.)
Select the item which you want to repeat. The items 
displayed differ depending on the type of media.
Select “Off” to cancel.
Random
Select whether or not to play random.
Picture
Select the picture quality mode during play.
≥If you select “User”, you can make further adjustments. 
Press [ 1] to select “Picture Adjustment” and press [OK].
Progressive
Select the method of conversion for progressive output to 
suit the type of material being played.
≥When the content is distorted change the settings from 
“Auto” to “Video”.
Disc
Primary 
Vi deo Vid eo
The recording method of 
original video appears.
Soundtrack
Select the type of audio or 
language.
Secondary 
Vi deo Vid eo
Select on/off of images. The 
recording method of original 
video appears.
Soundtrack
Select on/off of audio and the 
language.
Video
Play
Disc
Subtitle StyleAngle
SubtitleOff Main1ENG
-
-
Signal Type
Menus Items Settings
e.g., BD-Video
Play
Video
DMP-BD75_VQT3A92_eng.book  21 ページ  ２０１０年１２月９日　木曜日　午後９時０分 
						

							22VQT3A92
Setup menu
Change the unit’s settings if necessary. The settings remain 
intact even if you switch the unit to standby.
1Press [HOME].
2Press [OK] to select “Setup”.
3Press [2] to select “Player Settings”.
4Press [3,4] to select the menu and 
press [OK].
5Press [ 3,4 ] to select the item and press 
[OK].
If there are any other items, repeat these steps.
6Press [ 3,4,2,1 ] to select the option 
and press [OK].
	
≥ There may be differences in operation methods. If this happens, follow 
the on-screen instructions for the operation.
DVD-Video Ratings
Set a ratings level to limit DVD-Video play.
≥Follow the on-screen instructions. Enter a 4-digit 
password with the number buttons when the password 
screen is shown.
BD-Video Ratings
Set an age limit of BD-Video play.
≥Follow the on-screen instructions. Enter a 4-digit 
password with the number buttons when the password 
screen is shown.
Audio Language
Choose the language for audio.
≥If “Original” is selected, the original language of each disc 
will be selected.
≥ Enter a code ( >29) with the number buttons when you 
select “Other  ¢¢¢¢”.
Subtitle Language
Choose the language for the subtitle.
≥If “Automatic” is selected and the language selected for 
“Audio Language” is not available, subtitles of that 
language will automatically appear if available on that 
disc.
≥ Enter a code ( >29) with the number buttons when you 
select “Other  ¢¢¢¢”.
Menu Language
Choose the language for the disc menus.
≥Enter a code ( >29) with the number buttons when you 
select “Other  ¢¢¢¢”.
BD-Live Internet Access ( >16)
You can restrict Internet access when BD-Live functions are 
used.
≥If “Allow (Limited)” is selected, Internet access is permitted 
only for BD-Live contents which have content owner 
certificates.
Mixed Data Disc Option
Select the playback contents on discs with both data files 
and Video.
≥If “MP3/JPEG/MKV” is selected, the video menu function 
is unavailable.
≥ If “BDAV/AVCHD” is selected, data file cannot be played 
back.
Subtitle Text
Select a suitable item according to the language used for 
MKV subtitles text.
≥This item is displayed only after playing back a file.
	≥ BDAV is one of the video formats that are recorded on a BD-RE/BD-R. 
(> 6)
About the password
The following items use the same password.
Don’t forget your password.
≥“DVD-Video Ratings”
≥ “BD-Video Ratings”
≥ “Lock” (> 24)
OKRETURN
Player Settings
Disc
Video
Audio
Display
TV / Device Connection
Network
Others
Disc
VQT3A92~Body_eng.fm  22 ページ  ２０１０年１２月２１日　火曜日　午後１時５９分 
						

							Settings
23VQT3A92
Black Level Control
Select lighter or darker for adjusting the black level control to 
the desired setting for picture enhancement.
Dynamic Range Compression
You can listen at low volumes but still hear dialog clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
≥“Auto” is effective only when playing Dolby TrueHD.
Digital Audio Output
Press [OK] to show the following settings:
Downmix
Select the downmix system of multi-channel to 2-channel 
sound.
≥Select “Surround encoded”, when the connected 
equipment supports the virtual surround function.
≥ There is no effect on “Bitstream” via HDMI AV OUT.
≥ The audio will be output in “Stereo” in the following cases:
– AVCHD playback
– Playback of secondary audio (including the button click 
sound).
Status Messages
Choose whether to show status messages automatically.
On-screen Language
Choose the language for menus and on-screen messages.
Screen Saver Function
This is to prevent burn-in on the screen.
≥When this is set to “On”:
If there is no operation for 10 minutes or more, Direct 
Navigator screen switches to HOME menu automatically.
≥ While playing and pausing, etc., this function is not 
available.
≥ As for Music [CD-DA] or MP3, regardless of the setting, if 
there is no operation for a while, Direct Navigator screen 
switches to the other states automatically.
Front Panel Display
Changes the brightness of the unit’s display.
≥If “Auto” is selected the display is dimmed during playback 
and bright not during playback.
License
Information about the software used by this unit is displayed.
TV Aspect
Set to match the type of television connected.
When connected to a 4:3 aspect television and playing 16:9 
ratio image:
When connected to a 16:9 widescreen television and 
playing 4:3 ratio image:
Video
Audio
Dolby D/Dolby D +/Dolby TrueHD
DTS/DTS-HD
Select the audio signal to output.
≥Select “PCM”, when the connected equipment cannot 
decode the respective audio format. This unit decodes 
the audio format and transmits to the connected 
equipment.
≥ Not making the proper settings may result in noise.
BD-Video Secondary AudioSelect whether to mix or not mix the primary audio and
secondary audio (including the button click sound). ( >16)
≥ If “Off” is selected, the unit outputs the primary audio 
only.
Display
TV / Device Connection
4:3 Pan & 
Scan
The sides are cut off so 
the picture fills the screen. 
When playing BD-Video, 
video is output as “4:3 
Letterbox”.
4:3 
LetterboxBlack bands appear at the 
top and bottom of the 
picture.
16:9Video is displayed as a 4:3 ratio image in the 
center of the screen.
16:9 FullVideo is displayed as a horizontally 
stretched 16:9 image.
DMP-BD75_VQT3A92_eng.book  23 ページ  ２０１０年１２月９日　木曜日　午後９時０分 
						

							24VQT3A92
HDMI Connection
Press [OK] to show the following settings:
Network Easy Setting (>11)
Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings:
HDMI ResolutionThe items supported by the connected devices are 
indicated on the screen as “ ¢”. When any item without “ ¢” 
is selected, the images may be distorted.
≥ If “Auto” is selected, automatically selects the output 
resolution best suited to the connected television.
≥ To enjoy high-definition video up-converted to 1080p, 
you need to connect the unit directly to 1080p 
compatible HDTV (High Definition Television). If this unit 
is connected to an HDTV through other equipment, it 
must also be 1080p compatible.
24p OutputWhen this unit is connected to a TV supporting 1080/24p 
output using an HDMI cable, movies and other material 
recorded at 24p are output at 24p.
≥When BD-Video images other than 24p are played, 
images are output at 60p.
≥ 24p : 
A progressive image recorded at a rate of 24 frames per 
second (motion-picture film). Many BD-Video movie 
contents are recorded in 24 frames/second in 
accordance with the film materials.
HDMI Audio OutputThis setting selects whether or not to output audio from 
HDMI.
VIERA LinkSet to use “HDAVI Control” function when connected with 
an HDMI cable to a device that supports “HDAVI Control”.
≥Select “Off” when you do not want to use “HDAVI 
Control”.
Deep Color OutputThis setting is for selecting whether to use Deep Color 
output when a television that supports Deep Color is 
connected.
Contents Type FlagDepending on the playback content, the TV will output 
adjusting to the optimal method when a TV that supports 
this function is connected.
Network
IP Address/DNS SettingsThis is for checking the state of the network connection 
and setting the IP address and DNS-related.
Press [OK] to show the respective setting.
≥“Connection Speed Setting” is enabled only when “Auto 
Detect Connection Speed” is turned “Off”.
Proxy Server Settings
This is for checking the state of connection with the Proxy 
server and performing settings.
Press [OK] to show the respective setting.
Internet Content Settings (> 18) 
(Network Service)
Press [OK] to show the following settings:
Lock
You can restrict the usage of Network Service.
≥ Follow the on-screen instructions. Enter a 4-digit 
password with the number buttons when the password 
screen is shown.
MAC Address
Displays the MAC address of this unit.
DMP-BD75_VQT3A92_eng.book  24 ページ  ２０１０年１２月９日　木曜日　午後９時０分 
						

							Settings
25VQT3A92
Remote Control Code
Change the remote control code if other Panasonic products 
react to this remote control.
Quick Start
Speed of startup from power off is increased.
≥Internal control unit will be powered when it is set to “On” 
so compared to when the setting is “Off” the following will 
occur.
– Idle power consumption will increase. (about the power 
consumption  >30)
Easy Setting
You can execute basic settings (“On-screen Language”, “TV 
Aspect”, “Quick Start”)
Restore Default Settings
This returns all values in the Setup menu and the Playback 
menu, except for “Remote Control Code”, “On-screen 
Language”, “IP Address/DNS Settings”, “Proxy Server 
Settings”, “Lock”, “DVD-Video Ratings” and “BD-Video 
Ratings” etc. to the default settings.
System Information
Display firmware version of this unit.
Firmware Update ( >12)
Press [OK] to show the following settings:
Others
Automatic Update CheckWhen this equipment remains connected to the Internet, it 
will check for the latest firmware version when it is turned 
on and you can update it if necessary.
Update NowYou can update the firmware manually if a firmware 
update is available.
DMP-BD75_VQT3A92_eng.book  25 ページ  ２０１０年１２月９日　木曜日　午後９時０分 
						

							26VQT3A92
Reference
Troubleshooting guide
Before requesting service, please perform 
the following steps.
The following do not indicate a problem with this unit:
– Regular disc rotating sounds.
– Image disturbance during search.
∫Unit doesn’t respond to remote 
control or front panel buttons.
Disconnect the power cord, wait 1 minute, then reconnect 
the power cord.
∫Cannot eject disc.
The unit may have a problem.
1 While the unit is on, press and hold [OK], [B] and [Y] on 
the remote control at the same time for more than 
5 seconds.
– “00 rEt” is displayed on the unit’s display.
2 Repeatedly press [ 1] (right) on the remote control or 
[POWER  Í/I] on the unit until “06 FtO” is displayed on 
the unit’s display.
3 Press [OK] on the remote control or [ 25)
To return all settings to the factory preset.
¾Reset the unit as follows:
1 While the unit is on, press and hold [OK], [B] and [Y] on 
the remote control at the same time for more than 
5 seconds.
– “00 rEt” is displayed on the unit’s display.
2 Repeatedly press [ 1] (right) on the remote control or 
[POWER  Í/I] on the unit until “08 FIn” is displayed on 
the unit’s display.
3 Press and hold [OK] on the remote control or [ 4)
¾The remote control and main unit are using different 
codes. If “SEt  ” is displayed on the unit’s display when 
a button is pressed on the remote control, change the 
code on the remote control. ( >25)
The TV tuner mode is not displayed when 
the TV is switched on.
¾This phenomenon may occur, depending on the TV 
setting, when “Quick Start” is set to “On”.
– Depending on the TV, this phenomenon may be prevented  by reconnecting the HDMI cable to a different HDMI input 
terminal or by changing the HDMI auto connection setting.
You have forgotten your ratings password.
You want to cancel the ratings level.
¾The ratings level returns to the factory preset.
1 While the unit is on, press and hold [OK], [B] and [Y] on 
the remote control at the same time for more than 
5 seconds.
– “00 rEt” is displayed on the unit’s display.
2 Repeatedly press [ 1] (right) on the remote control or 
[POWER  Í/I] on the unit until “03 VL” is displayed on 
the unit’s display.
3 Press [OK] on the remote control or [  12)
4
Make the following checks and visit our 
website for more information.
For USA : 
www.panasonic.com/help
Enter the model number.
For Canada  : 
http://www.panasonic.ca
4
Or visit our website to find a service 
center.
You can find a service center near you easily on our 
website.
Other support information :
“Customer Services Directory (United States and Puerto 
Rico)” ( >33) or “Limited Warranty (Only for 
CANADA)” ( >34).
General operation
VQT3A92~Body_eng.fm  26 ページ  ２０１０年１２月２２日　水曜日　午前１０時４６分 
						

							Reference
27VQT3A92
The images from this unit do not appear on 
the television.
Picture is distorted.
¾An incorrect resolution is selected in “HDMI Resolution”. 
Reset the setting as follows:
1 While the unit is on, press and hold [OK], [B] and [Y] on 
the remote control at the same time for more than 
5 seconds.
– “00 rEt” is displayed on the unit’s display.
2 Repeatedly press [ 1] (right) on the remote control or 
[POWER  Í/I] on the unit until “04 PrG” is displayed on 
the unit’s display.
3 Press and hold [OK] on the remote control or [ 24)
– When Dolby Digital Plus, Dolby TrueHD, and DTS-HD 
audio are not output in bitstream, select “Yes” in “Restore 
Default Settings” and make proper settings. ( >25)
Video is not output in high-definition.
¾Confirm that “HDMI Resolution” in the Setup menu is set 
properly. ( >24)
No subtitles.
¾When progressive output is on, closed captions/subtitles 
cannot be displayed.
The subtitles overlap closed captions 
recorded on discs.
¾Turn off the subtitles or turn off the closed caption 
setting on the TV.  (> 21)
A black band is displayed around the edge 
of the screen.
The aspect ratio of the screen is abnormal.
¾Confirm the “TV Aspect” is set properly. ( >23)
¾Adjust the aspect setting on the television.
Cannot hear the desired audio type.
¾Check the connections and the “Digital Audio Output” 
settings. ( >9, 23)
¾To output audio from a device connected with an HDMI 
cable, set “HDMI Audio Output” to “On” in the Setup 
menu. ( >24)
Disc cannot be played.
¾The disc is dirty. ( >4)
Still pictures (JPEG) do not play back 
normally.
¾The images that were edited on the PC, such as 
Progressive JPEG, etc., may not play back.
I can’t play back BD-Live.
¾Confirm that this unit is connected to the broadband 
Internet. ( >9)
¾Confirm the “BD-Live Internet Access” settings. ( >22)¾Confirm a USB device is inserted into the USB port. 
(> 13)
I can’t connect to the network.
¾Confirm the network connection and settings. 
(>9, 11, 24)
¾Check the operating instructions for each device and 
connect accordingly.
Picture
Audio
Playback
Network
DMP-BD75_VQT3A92_eng.book  27 ページ  ２０１０年１２月９日　木曜日　午後９時０分 
						

							28VQT3A92
Messages
The following messages or service numbers appear on the 
television or unit’s display when something unusual is 
detected during startup and use.
Cannot play.¾You inserted an incompatible disc (Discs recorded in 
PAL video, etc.).
Cannot display on this unit.¾You tried to play a non-compatible image.
No disc is inserted.¾The disc may be upside down.
$ This operation is not available.¾Some operations are unsupported by the unit. For 
example;
– BD-Video: During playback, reverse slow-motion or reverse frame-by-frame is not possible.
IP address is not set.¾The “IP Address” in “IP Address/DNS Settings” is “---. 
---. ---. ---”. Set the “IP Address”, “Subnet Mask”, and 
“Default Gateway”. (Select the automatic address 
acquisition if necessary.)
SEt  (“   ” stands for a number.)¾The remote control and main unit are using different 
codes. Change the code on the remote control.
Press and hold [OK] and the 
indicated number button at the 
same time for more than 5 
seconds.
H or F (“   ” stands for a number.)
¾There is something unusual.¾Check the unit using the troubleshooting guide. If the 
service number does not disappear, do the following.
1 Disconnect the plug from the AC outlet, wait a few 
seconds, then reconnect it.
2 Press [POWER  Í/I] to turn the power on.
If the service number does not disappear despite doing the 
above, request service from the dealer. Inform the dealer of 
the service number when requesting service.
On the television
On the unit’s display
VQT3A92~Body_eng.fm  28 ページ  ２０１０年１２月２２日　水曜日　午前１０時４８分 
						

							Reference
29VQT3A92
Supplemental information
∫Display languages list
∫ Language code list ∫
Unit’s display list
This list only contains displays that are difficult to read.
*“  ” stands for a number.
DisplayLanguageDispl ayLanguageDisplayLanguage
LanguageCodeLanguageCodeLanguageCode
ENG
FRA
DEU
ITA
ESP
NLD
SVE
NOR
DAN
POR
RUS English
French
German
Italian
Spanish
Dutch
Swedish
Norwegian
Danish
Portuguese
Russian ARA  
HIN
PER
IND
MRI
BUL
RUM
GRE
TUR 
JPN
CHI
KOR
MAL
VIE
THA
POL
CES
SLK
HUN
FIN Japanese
Chinese
Korean
Malay
Vietnamese
Thai
Polish
Czech
Slovak
Hungarian
FinnishArabic
Hindi
Persian
Indonesian
Maori
Bulgarian
Romanian
Greek
Turkish
Others
Abkhazian: 6566
Afar: 6565
Afrikaans: 6570
Albanian: 8381
Amharic
:6577
Arabic: 6582
Armenian: 7289
Assamese: 6583
Aymara: 6589
Azerbaijani: 6590
Bashkir: 6665
Basque: 6985
Bengali; Bangla: 6678
Bhutani: 6890
Bihari: 6672
Breton: 6682
Bulgarian: 6671
Burmese: 7789
Byelorussian: 6669
Cambodian: 7577
Catalan: 6765
Chinese: 9072
Corsican: 6779
Croatian: 7282
Czech: 6783
Danish: 6865
Dutch: 7876
English: 6978
Esperanto: 6979
Estonian: 6984
Faroese: 7079
Fiji: 7074
Finnish: 7073
French: 7082
Frisian: 7089
Galician: 7176
Georgian: 7565
German: 6869
Greek: 6976
Greenlandic: 7576
Guarani: 7178 Gujarati: 7185
Hausa: 7265
Hebrew: 7387
Hindi: 7273
Hungarian: 7285
Icelandic: 7383
Indonesian: 7378
Interlingua: 7365
Irish:
7165
Italian: 7384
Japanese: 7465
Javanese: 7487
Kannada: 7578
Kashmiri: 7583
Kazakh: 7575
Kirghiz: 7589
Korean: 7579
Kurdish: 7585
Laotian: 7679
Latin: 7665
Latvian, Lettish: 7686
Lingala: 7678
Lithuanian: 7684
Macedonian: 7775
Malagasy: 7771
Malay: 7783
Malayalam: 7776
Maltese: 7784
Maori: 7773
Marathi: 7782
Moldavian: 7779
Mongolian: 7778
Nauru: 7865
Nepali: 7869
Norwegian: 7879
Oriya: 7982
Pashto, Pushto: 8083
Persian: 7065
Polish: 8076
Portuguese: 8084
Punjabi: 8065
Quechua: 8185 Rhaeto-Romance:
8277
Romanian: 8279
Russian: 8285
Samoan: 8377
Sanskrit: 8365
Scots Gaelic: 7168
Serbian: 8382
Serbo-Croatian: 8372
Shona: 8378
Sindhi: 8368
Singhalese: 8373
Slovak: 8375
Slovenian: 8376
Somali: 8379
Spanish: 6983
Sundanese: 8385
Swahili: 8387
Swedish: 8386
Tagalog: 8476
Tajik: 8471
Tamil: 8465
Tatar: 8484
Telugu: 8469
Thai: 8472
Tibetan: 6679
Tigrinya: 8473
Tonga: 8479
Turkish: 8482
Turkmen: 8475
Twi: 8487
Ukrainian: 8575
Urdu: 8582
Uzbek: 8590
Vietnamese: 8673
Volapük: 8679
Welsh: 6789
Wolof: 8779
Xhosa: 8872
Yiddish: 7473
Yo r u b a : 8 9 7 9
Zulu: 9085
DisplayReadingDisplayReading
BYE OPEN
READ PLAY
STOP SETUP
NET F99
No PLAY
No UPDATE
SET  *START
UPD 
-5* FINISH
STILLP P-LIST SLIDE REPEAT
No DISC No PLAY
No REA D UNLOCK
BD-J DISC
UNSUPPORT
DMP-BD75_VQT3A92_eng.book  29 ページ  ２０１０年１２月９日　木曜日　午後９時０分 
						

							30VQT3A92
Specifications
Signal system: NTSC
Operating temperature range:
i5 oC to  i35  oC ( i41  oF to  i95  oF)
Operating humidity range: 10 % to 80 % RH (no condensation)
Video output: 1.0 Vp-p (75≠)/Pinjack:1system
Audio output: 2 Vrms (1 kHz, 0 dB)/Pin jack
Number of connectors : 2 channel:1 system
HDMI AV output: Type A (19 pin) : 1 system
This unit supports “HDAVI Control1” function.
USB slot: USB2.0 : 1 system
Ethernet:  10BASE-T/100BASE-TX : 1 system
LASER Specification
Class  I LASER Product:
Wave length:
790 nm (CDs)/655 nm (DVDs)/405 nm (BDs)Laser power: No hazardous radiation is emitted with the 
safety protection
Power supply: AC 120 V, 60 Hz
Power consumption:  Approx. 12 W
Power consumption in standby mode:
Approx. 0.1 WPower consumption in quick start standby mode:Approx. 3.3 WDimensions (W kDk H)  Including the projecting parts:
430 mmk185 mm k35 mm
(Approx. 16 15/16 zk7 5/16 zk1 7/16 z)
Mass (Weight): Approx. 1.6 kg (3.52 lbs)
Specifications are subject to change without notice.
≥With certain recording states and folder structures, the 
play order may differ or playback may not be possible.
The audio output differs depending on the settings on the 
unit. ( >23, Digital Audio Output)
≥ The number of channels listed is the maximum possible 
number of output channels when connected to amplifier/
receiver compatible with the respective audio format.
*1When “BD-Video Secondary Audio” is set to “On”, the audio is output as 
Dolby Digital, DTS Digital Surround or 5.1ch PCM.
*2The maximum possible number of Dolby sound is 2ch PCM.
File format
File formatExtensionReference
MP3 “.MP3”, “.mp3” ID3 tags (Only titles and 
the names of artists)
JPEG
“.JPG”, “.jpg” ≥
MOTION JPEG and 
Progressive JPEG is not 
supported
≥ You may not be able to 
play back the file if you 
have edited the folder 
structure or the file 
name on a PC or other 
device.
MKV “.MKV”, “.mkv”
≥The video file and 
subtitles text file are 
inside the same folder, 
and the file names are 
the same except for the 
file extensions.
≥ Some MKV file may not 
be played back, 
depending on the video 
resolution and frame 
rate condition.
Subtitles text 
file
“.SRT”, “.srt”, 
“.SSA”, “.ssa”, 
“.ASS”, “.ass”
Audio information
Te r m i n a l“Digital Audio Output”
“Bitstream”“PCM”*2
HDMI AV 
OUT Outputs using original 
audio*1
BD-Video : 
7.1ch PCM*1
DVD-Video : 
5.1ch PCM
VQT3A92~Body_eng.fm  30 ページ  ２０１０年１２月１６日　木曜日　午後２時５４分