Panasonic Dmp Bd75 Operating Instructions

							Connections and settings
11VQT3B11
After completing “Easy Setting”, you can continue with 
“Network Easy Setting”.
Follow the on-screen instructions and make 
the settings with [2,1] and press [OK].
Network Easy Setting
(Home Network Connection Check) Network Easy Setting
(Internet Connection Test)
	
≥
Refer to the operating instructions of the hub or router.
≥ You can perform this setup anytime by selecting “Network Easy Setting” 
in the Setup menu. ( 26)
≥ You can redo these settings individually using “Network Settings”. 
( 26)
Network Easy Setting
When you experience 
problems with settings
DisplayCheck the 
following
1. LAN cable connection Fail ≥Connection 
of the LAN 
cables ( 9)
2. IP address setting Fail
3. Connection to gateway Fail
1. LAN cable connection Pass
≥Connection 
and settings 
of the hub 
and router
≥ Settings of 
“IP Address / 
DNS 
Settings” 
( 26)
2. IP address setting Fail
3. Connection to gateway Fail
1. LAN cable connection Pass
2. IP address setting
Pass or 
Home 
network 
available
3. Connection to gateway Fail
OKRETURN
Network Easy Setting
LAN setup and testing of home network and Internet
connections are required for Internet functions
(BD-Live etc.). 
Broadband Internet connection is necessary for BD-Live.
Is a LAN cable already connected ?
Please refer to the operating instructions about network
connection.
Press [OK] to proceed.
OK
Network Easy Setting (Home Network Connection Check)
YesNo
Complete.
1. LAN cable connection         
2. IP address setting
3. Connection to gateway
LAN cable is not connected.
Please check the connection.
Select “Yes” and press [OK] to check network
connection again. 
Select “No” and press [OK] to finish Network 
Easy Setting.
 Fail
 Fail
 Fail
DisplayCheck the following
Cannot find the 
server.
(B019) ≥
“Primary DNS” and “Secondary 
DNS” settings of “IP Address / 
DNS Settings” ( 26)
Failed to connect to 
the server.
(B020) ≥
The server may be busy or the 
service may have been 
suspended. Please wait a few 
moments, and then try again.
≥ Settings of “Proxy Server 
Settings” ( 26) and the router
OK
Network Easy Setting (Internet Connection Test)Complete.
- Connection to the Internet          Fail(B019)
Failed the connection test.
Cannot find the server.(B019)
Please refer to the operating instructions for the cause
of the error and the countermeasure for it.
Press [OK].
DMP-BD7\bGNGCG\fGW-VQT3B11.book  11 ページ  ２０１１年２月９日　水曜日　午後７時２８分 
						

							12VQT3B11
Occasionally, Panasonic may release updated firmware for 
this unit that may add or improve the way a feature 
operates. These updates are available free of charge.
This unit is capable of checking the firmware automatically 
when connected to the Internet via a broadband connection.
When a new firmware version is available, the following 
message is displayed.
To update the firmware
Press [HOME]  select “Setup”   select “Player 
Settings”   select “Others”   [OK]   select “Firmware 
Update”   [OK]   select “Update Now”
DO NOT DISCONNECT the unit from the AC power or 
perform any operation while the update takes place.
After the firmware is installed, “FInISH” will be displayed on 
the unit’s display. Unit will restart and the following screen 
will be displayed.
	
≥ If downloading on this unit fails or this unit is not connected to the 
Internet, then you can download the latest firmware from the 
following website and burn it to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. ( 27, “System 
Information”)
≥ Downloading will require several minutes. It may take longer or 
may not work properly depending on the connection environment.
≥ If you do not want to check for the latest firmware version, set 
“Automatic Update Check” to “Off”. ( 27)
STEP 6 : 
Reprogramming the 
remote control
If you have more than one Panasonic player/recorder and 
the remote control operates both products at once, you will 
need to change the remote control code on one product to 
prevent this occurrence. ( 27, “Remote Control”)
You can operate the TV using the unit’s remote control.
1Input the 2-digit code ( 32) with the 
number buttons while pressing [ ÍTV].
e.g., 01: [0]   [1]
2Test by turning on the television.
	
≥ If your television brand has more than one code listed, select the one 
that allows correct operation.
Firmware updates
New firmware is available.
Please update firmware in Setup.
The firmware has been updated.
Current Version:x.xx
RETURNOK
For other Panasonic products
For TV
DMP-BD7\bGNGCG\fGW-VQT3B11.book  12 ページ  ２０１１年２月９日　水曜日　午後７時２８分 
						

							Connections and settings
Playback
13VQT3B11
Pla ybac k
Inserting or removing 
media
≥When inserting a media item, ensure that it is facing the 
right way up.
≥ If you connect a Panasonic product with a USB 
connection cable, the setup screen may be displayed on 
the connected equipment. For details, refer to the 
instructions for the connected equipment.
HOME menu
Major functions of this unit can be operated from the HOME 
menu.
PreparationTurn on the television and select the appropriate video input 
on the television.
1Press [Í] to turn on the unit.
The Home menu will be displayed.
2Press [OK] or [ 3,4, 2,1] to select the 
item.
≥ When a media is inserted, contents selection screen 
for that media is displayed.
≥ If there are any other items, repeat this step.
≥ To return to HOME menu, select “HOME” or press 
[RETURN] several times.
To show the HOME menu
Press [HOME].
	
≥ Items to be displayed may vary with the media.
≥ Where necessary, set “Mixed Data Disc Option” when using a disc with 
both data files (MP3, JPEG, DivX, MKV) and Video. ( 24)
Videos/
Photos/
Music Disc
Play back the contents. 
(
14, 18, 19)
≥ When multiple contents are 
recorded, select the types 
of contents or the title.
USB
MEDIA 
SERVER (
20)
Setup Player 
Settings
(
24)
USB 
Management
( 16)
1
Music
Photos
Videos
Blu-ray Disc Player
HOME
Setup
MEDIA
SERVER
DMP-BD7\bGNGCG\fGW-VQT3B11.book  13 ページ  ２０１１年２月９日　水曜日　午後７時２８分 
						

							14VQT3B11
Playing video contents
1Insert the media.
When the contents menu is displayed, press 
[3,4, 2,1 ] to select the item. ( 13)
2Press [3, 4] to select the title and press 
[OK].
∫ To show menus
You can display Top Menu, DIRECT NAVIGATOR or Pop-up 
Menu.
Press [TOP MENU] or [POP-UP MENU].
≥Press [ 3,4, 2,1 ] to select the item and press [OK].
∫ To show the status messages
While playing, press [STATUS].
The status messages give you information about what is 
currently being played. Each time you press [STATUS], the 
display information may change or will disappear from the 
screen.
	
≥Signal from PAL discs is output as PAL. Signal from NTSC discs is 
output as “NTSC” or “PAL60”. You can select “NTSC” or “PAL60” in 
“NTSC Contents Output” for NTSC discs. ( 25)
≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. 
Press [ ∫STOP] when you have finished playback to protect the unit’s 
motor, your television screen and so on.
≥ Depending on media and contents, the display may change or may not 
appear.
≥ DivX and MKV: Successive play is not possible.
≥ It is not possible to playback AVCHD and MPEG2 video which have 
been dragged and dropped, copied and pasted to the media.
≥ To save on electricity, the unit is turned off automatically if there is no 
button operation for about 30 minutes when not playing back (such as 
when paused, displaying the m enu, displaying still pictures, etc.).
These functions may not work depending on the media and 
contents.
Press [∫STOP].The stopped position is memorized.
Resume play function
Press [1PLAY] to restart from this position.
≥ The position is cleared if the tray is opened or you press 
[∫STOP] several times to display “StOP” on the unit’s 
display.
≥ On BD-Video discs including BD-J, the resume play 
function does not work.
Press [;PAUSE].≥Press [ ;PAUSE] again or [ 1PLAY] to restart play.
Search
While playing, press [SEARCH 6] or 
[SEARCH 5].
≥Music and MP3: The speed is fixed to a single step.
Slow-motion
While paused, press [SEARCH 5].
The speed increases up to 5 steps.
≥Press [ 1PLAY] to revert to normal playback speed.
While playing or paused, press [ :] or 
[9 ].
Skip to the title, chapter or track you want to play.
≥Each press increases the number of skips.
While paused, press [ 1] (;1).
≥Press and hold to change in succession forward.
≥ Press [ 1PLAY] to revert to normal playback speed.
Press [AUDIO].You can change the audio channel number or soundtrack 
language, etc.
BDDVDCDUSB
PlayBD-Video T1     C1     0:05.140:20.52
e.g.BD-Video
To t a l  t i m e
Elapsed time in the title
Current position
T: Title, C: Chapter, PL: Playlist
Other operations during play
Stop
Pause
Search/Slow-motion
Skip
Frame-by-frame
Changing audio
DMP-BD7\bGNGCG\fGW-VQT3B11.book  14 ページ  ２０１１年２月９日　水曜日　午後７時２８分 
						

							Playback
15VQT3B11
1Press [OPTION].
2Select an item, then press [OK].
While DIRECT NAVIGATOR screen is displayed
While playing
	
≥Depending on the media and contents, displayed items are different.
∫ Displaying subtitle text
[Except\for\Asia[
You can display subtitle text on the DivX and MKV video disc 
with this unit.
The operation might be different or it may not operate 
properly depending on the way the file was made or the 
state of this unit (playing, stopped, etc.).
Set “Subtitle” in “Disc” ( 22)
	
≥DivX and MKV video files that do not display “Text” do not contain 
subtitle text.
≥ If the subtitle text is not displayed correctly, try changing the language 
settings. ( 24)
≥ This function has no relation to the subtitles specified in DivX standard 
specifications and has no clear standard. 
Useful functions
View 
PlaylistsTo play playlists.
View Titles To select the title.
FolderTo switch to another folder.
Top MenuTo display Top Menu.
Pop-up 
MenuTo display Pop-up Menu.
Menu
To display Menu.
DMP-BD7\bGNGCG\fGW-VQT3B11.book  1\b ページ  ２０１１年２月９日　水曜日　午後７時２８分 
						

							16VQT3B11
BD-Live allows you to enjoy more functions such as 
subtitles, exclusive images and online games by connecting 
this unit to the Internet. Since most of the BD-Live 
compatible discs are played back using the BD-Live 
function, additional contents are required to be downloaded 
into the external memory (local storage).
≥This unit uses a USB device as a local storage device. 
BD-Live function cannot be used when there is no USB 
device inserted.
1Perform network connection and 
settings. ( 9, 11)
2Insert a USB memory with 1 GB or more 
free space.
3Insert the disc.
∫Deleting data on the USB device
If you no longer need data recorded on the USB device, you 
can delete data with the following operation.
1 Insert a USB device.
2 Press [HOME].
3 Press [OK] to select “Setup”.
4 Press [ 1] to select “USB Management”.
5 Press [OK].
6 Press [ 2,1] to select “Yes” and press [OK].
7 Press [ 2,1] to select “Start” and press [OK]. To turn on/off secondary video
Press [PIP].
To turn on/off secondary audio
[DISPLAY] 
 select “Disc”  [1]  select 
“Signal Type”  [OK]  set “Soundtrack” in 
“Secondary Video” to
 “On” or “Off”
	
≥ The usable functions and the operating method may vary with each 
disc, please refer to the instructions on the disc and/or visit their 
website.
≥ Some BD-Live content available on the Blu-ray discs may require an 
Internet account to be created in order to access the BD-Live content. 
Follow the screen display or instruction manual of the disc for 
information on acquiring an account.
≥ “BD-Live Internet Access” may need to be changed for certain discs 
( 24).
≥ When discs supporting BD-Live are played back, the player or disc IDs 
may be sent to the content provider via the Internet.
≥ During search/slow-motion or frame-by-frame, only the primary video is 
displayed.
≥ When “BD-Video Secondary Audio” in “Digital Audio Output” is set to 
“Off”, secondary audio will n ot be played ( 25).
Enjoying BD-Live or 
picture-in-picture in BD-Video
Enjoying BD-Live discs with 
Internet
No. of Files    1
Free space    1844 MB
USB device
BD-Video Data Erase
OKRETURN
USB Management
Playing picture-in-picture
Secondary video
Primary video
DMP-BD7\bGNGCG\fGW-VQT3B11.book  16 ページ  ２０１１年２月９日　水曜日　午後７時２８分 
						

							Playback
17VQT3B11
ABOUT DIVX VIDEO:DivX® is a digital video format created by DivX, Inc. This is 
an official DivX Certified® device that plays DivX video. Visit 
divx.com for more information and software tools to convert 
your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND:This DivX Certified® device must be registered in order to 
play purchased DivX Video-on-Demand (VOD) movies. 
To obtain your registration code, locate the DivX VOD 
section in your device setup menu.
Go to vod.divx.com for more information on how to complete 
your registration.
≥ Video images of the copyright-protected DivX contents 
stored on USB device can be output only through the 
HDMI output terminal.
Display the unit’s registration code.
( 27, “DivX Registration” in “Others”)
≥ After playing DivX VOD content for the first time, the 
registration code is not displayed.
≥ If you purchase DivX VOD content using a registration 
code different from this unit’s code, you will not be able to 
play this content.
Cancel the unit’s registration.
( 27, “DivX Registration” in “Others”)
Press [ 2,1] to select “Yes” in “DivX Registration”.
Use the deregistration code to cancel the registration in 
www.divx.com.
Regarding DivX VOD content that can only 
be played a set number of times
Some DivX VOD contents can only be played a set number 
of times. When you play this content, the number of times 
already played and initially playable number of times is 
displayed.
≥ The remaining number of plays decreases each time a 
programme is played. However, when playing from the 
point where play was previously stopped, the remaining 
number of plays does not decrease due to the resume 
play function.
Regarding DivX
DivX Registration
You must register this unit to play
protected DivX videos.
The registration code is necessary to
register this unit.
Registration Code: XXXXXXXXXX
Please register at www.divx.com/vod/10 alphanumeric 
characters
DMP-BD7\bGNGCG\fGW-VQT3B11.book  17 ページ  ２０１１年２月９日　水曜日　午後７時２８分 
						

							18VQT3B11
Playing still pictures
(BD-RE, DVD-R/-R DL, CD-R/RW, USB device)
1Insert the media.
When the contents menu is displayed, press 
[3,4, 2,1 ] to select the item. ( 13)
2Press [3, 4,2,1] to select the still 
picture and press [OK].
Press [ 2,1] to display the previous or next still picture.
To exit the screen
Press [TOP MENU].
∫ To show the still picture properties
While playing, press [STATUS] once or twice.
To exit the screen
Press [STATUS].
1Press [OPTION].
2Select an item, then press [OK].
While Photo View screen is displayed
While playing
	
≥Depending on the condition of the unit and media contents, displayed 
items are different.
≥ When a still picture with large number of pixels is play ed, the display 
interval may become longer. Even if the setting is changed, the display 
interval may not become shorter.
BDDVDCDUSB
DIRECT NAVIGATOR
USB ( JPEG ) Photo View
OPTIONPlayRETURN
0001
0005
00090006 0007 0008 0002 0003 0004
Page  001/001
Date     11.12.2007                    Total        3/9
Shooting date
Useful functions
FolderTo select the still pictures in another folder.
Start 
SlideshowYou can display still pictures one by one at 
a constant interval.
Slideshow 
SettingDisplay Interval
Change the display interval.
Transition Effect
Set display method.
Repeat Play
Repeat slideshow.
Press [
3,4,2 ,1] to select “Set” and 
press [OK].
Rotate 
RIGHT Rotate the still picture.
Rotate 
LEFT
DMP-BD7\bGNGCG\fGW-VQT3B11.book  18 ページ  ２０１１年２月９日　水曜日　午後７時２８分 
						

							Playback
19VQT3B11
Playing music
(DVD-R/-R DL, music CD, CD-R/RW, USB device)
1Insert the media.
When the contents menu is displayed, press 
[3, 4,2 ,1] to select the item. ( 13)
2Press [ 3,4] to select the track and press 
[OK].
“ ” indicates the track currently playing.
To exit the screen
Press [TOP MENU].
1While DIRECT NAVIGATOR screen is displayed
Press [OPTION].
2Press [3 ,4] to select “Folder” and press 
[OK].
	
≥ You cannot select folders that contain no compatible tracks.
Playing a track in another 
folder
DVDCDUSB
 0.09  4.30
001
002
003
004
005Music listNo.
Track Name Play Time Track01
Track01 4min30sec 
3min41sec 
4min30sec 
3min11sec 
5min  2sec 
Track025 Tracks / Total Play Time 20min54sec
Track03
Track04
Track05
DIRECT NAVIGATORCD
PlayRETURN
DMP-BD7\bGNGCG\fGW-VQT3B11.book  19 ページ  ２０１１年２月９日　水曜日　午後７時２８分 
						

							20VQT3B11
Playing back contents 
on the DLNA server 
(DLNA)
You can enjoy viewing video, still pictures and music saved on a 
DLNA Certified media server (Windows 7 operating system, etc.) 
connected to the home network with this unit.
You can also enjoy viewing the video and still pictures 
recorded in Panasonic DLNA compatible recorders (DIGA).
≥The countries where DIGA is available are limited. Refer 
to following site for availability.
http://panasonic.jp/support/global/cs/
Preparation1 Perform network connection ( 9) and network setting 
( 11) of this unit.
2 Perform Home Network settings of the connected 
equipment.
When connected to a PC with Windows 7 
installed
≥Add the contents and folder to the Windows Media® 
Player library.
≥ Playlist of Windows Media
® Player can play back only 
the contents that are stored in the libraries.
Regarding setting method of Windows 7 refer to its 
instructions or help.
When connected to a Panasonic DLNA 
compatible recorder (DIGA)
When a message requesting operation of the equipment 
to be registered is displayed, perform step 1 and 2.
1Press [MEDIA SERVER].
≥ A list of equipment connected via the network is 
displayed.
≥ This list can be updated by pressing the red button on 
the remote control.
2Press [3, 4] to select the equipment to 
playback the contents, and press [OK].
3Press [3, 4,2, 1] to select the item to 
playback (folder), and press [OK].
≥ You may be able to use convenient functions 
depending on the content by pressing [OPTION] or 
[DISPLAY].
≥ Control Panel is displayed once the playback starts.
Operation can be performed with [ 3,4,2 ,1], [OK] 
and [EXIT].
≥ Press [OK] if the Control Panel is not displayed.
≥ Press [RETURN] to hide the Control Panel.
To exit the screen
Press [EXIT], [HOME] or [TOP MENU].
	
≥ Menu structure will be different  depending on the equipment connected 
to this unit. Select the contents by repeating the operation.
≥ Depending on the contents and the connected equipment, playback 
may not be possible.
≥ Items displayed in grey on the display cannot be played back by this 
unit.
≥ This unit cannot be played back via connected equipment.
≥ Depending on the performance of the connec ted PC, video frames may 
be dropped during playback, or video may not playback at all.
Broadband router, etc.
Internet LAN Cable
For details about the setting and operation method of 
connected equipment, and compatible equipment, 
refer to the following Website and the operating 
instructions for each item of equipment.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
Update
MEDIA SERVER (DLNA Client)
OKRETURNServers found on the network are displayed.
Please select one.XXXXXX
e.g.
EXIT
Control Panel
e.g.
DLNA Certified 
media server
DMP-BD7\bGNGCG\fGW-VQT3B11.book  20 ページ  ２０１１年２月９日　水曜日　午後７時２８分