Panasonic Dmp Bd60 Operating Instructions
Here you can view all the pages of manual Panasonic Dmp Bd60 Operating Instructions. The Panasonic manuals for CD/DVD/Blu-Ray Drive are available online for free. You can easily download all the documents as PDF.
Page 11
RQT9378 11 Video Connections (TV) For audio output, refer to pages 12 and 13. AConnecting to your TV, via HDMI AV OUT≥“HDMI Video Mode” and “HDMI Audio Output” should be set to “On”. ( >34) ≥ The HDMI connection supports VIERA Link “HDAVI Control” ( >28) when used with a compatible Panasonic TV. ≥ This cable provides both Video and Audio connections. B Connecting to your TV, via COMPONENT VIDEO OUT≥Connect terminals of the same color. ≥ Set the “Black Level Control” to “Darker”. (> 32) ≥ Using the...
Page 12
RQT9378 12 Connections Digital Audio Connections Analog Audio Connections DConnecting to HDMI AV OUT terminal≥“HDMI Video Mode” and “HDMI Audio Output” should be set to “On”. ( >34) ≥ “Digital Audio Output” : Depending on the connected amplifier/receiver. ( >33) ≥ The HDMI connection supports VIERA Link “HDAVI Control” ( >28) when used with a compatible Panasonic TV. ≥ Enjoying High Bit rate Audio of BD-Video (> 8) EConnecting to Digital Audio Output terminal≥Please set “Digital Audio Output” to the...
Page 13
![Page 13
RQT9378
13
AC power connection
GConnecting to 5.1ch AUDIO OUT terminal [BD80] ≥
“Analog Audio Output” should be set to “2ch
(Downmix) + 5.1ch”. ( >34)
≥ Enjoying High Bit rate Audio of BD-Video
(> 8)
≥ Using this connection, 7.1 channel surround
is mixed down to 5.1 channel audio.
≥ When connecting amplifier/receiver or other
devices with HDMI AV OUT terminal, set
“HDMI Audio Output” to “Off”. ( >34)
(Otherwise, depending on the specifications
of connected devices, the audio from AUDIO
OUT...](http://img.usermanuals.tech/thumb/58/64101/w300_dmp-bd60_mul_om_d-12.png "Page 13
RQT9378
13
AC power connection
GConnecting to 5.1ch AUDIO OUT terminal [BD80] ≥
“Analog Audio Output” should be set to “2ch
(Downmix) + 5.1ch”. ( >34)
≥ Enjoying High Bit rate Audio of BD-Video
(> 8)
≥ Using this connection, 7.1 channel surround
is mixed down to 5.1 channel audio.
≥ When connecting amplifier/receiver or other
devices with HDMI AV OUT terminal, set
“HDMI Audio Output” to “Off”. ( >34)
(Otherwise, depending on the specifications
of connected devices, the audio from AUDIO
OUT...")
RQT9378 13 AC power connection GConnecting to 5.1ch AUDIO OUT terminal [BD80] ≥ “Analog Audio Output” should be set to “2ch (Downmix) + 5.1ch”. ( >34) ≥ Enjoying High Bit rate Audio of BD-Video (> 8) ≥ Using this connection, 7.1 channel surround is mixed down to 5.1 channel audio. ≥ When connecting amplifier/receiver or other devices with HDMI AV OUT terminal, set “HDMI Audio Output” to “Off”. ( >34) (Otherwise, depending on the specifications of connected devices, the audio from AUDIO OUT...
Page 14
![Page 14
14
RQT9378
Remote control and unit reference guide
!Turn the unit on and off ( >15)
@ TV operation buttons ( >15)
You can operate the TV through the unit’s remote
control.
[ Í TV POWER] : Turn the television on and off
[INPUT] : Input select
[ ij VOL] : Adjust the volume
[ WX CH] : Channel select
# Open or close the disc tray ( >19)
$ Select title numbers, etc./Enter numbers or
characters ( >18, 20)
(The character buttons may be used when
operating VIERA CAST contents.
B 27)
[CANCEL] : Cancel
% Basic...](http://img.usermanuals.tech/thumb/58/64101/w300_dmp-bd60_mul_om_d-13.png "Page 14
14
RQT9378
Remote control and unit reference guide
!Turn the unit on and off ( >15)
@ TV operation buttons ( >15)
You can operate the TV through the unit’s remote
control.
[ Í TV POWER] : Turn the television on and off
[INPUT] : Input select
[ ij VOL] : Adjust the volume
[ WX CH] : Channel select
# Open or close the disc tray ( >19)
$ Select title numbers, etc./Enter numbers or
characters ( >18, 20)
(The character buttons may be used when
operating VIERA CAST contents.
B 27)
[CANCEL] : Cancel
% Basic...")
14 RQT9378 Remote control and unit reference guide !Turn the unit on and off ( >15) @ TV operation buttons ( >15) You can operate the TV through the unit’s remote control. [ Í TV POWER] : Turn the television on and off [INPUT] : Input select [ ij VOL] : Adjust the volume [ WX CH] : Channel select # Open or close the disc tray ( >19) $ Select title numbers, etc./Enter numbers or characters ( >18, 20) (The character buttons may be used when operating VIERA CAST contents. B 27) [CANCEL] : Cancel % Basic...
Page 15
![Page 15
RQT9378
15
Setting
Easy Setting
After connecting your new player and pressing the power button, a screen for the basic settings will appear.
Preparation
Turn on the television and select the appropriate video input on the television.
Reprogramming the remote control for TV/amplifier/receiver control
You can operate the TV or amplifier/receiver using the unit’s remote control.
Point the remote control at the television or amplifier/receiver.
1 Press [ ÍPOWER].
Setup screen appears.
≥If this unit is...](http://img.usermanuals.tech/thumb/58/64101/w300_dmp-bd60_mul_om_d-14.png "Page 15
RQT9378
15
Setting
Easy Setting
After connecting your new player and pressing the power button, a screen for the basic settings will appear.
Preparation
Turn on the television and select the appropriate video input on the television.
Reprogramming the remote control for TV/amplifier/receiver control
You can operate the TV or amplifier/receiver using the unit’s remote control.
Point the remote control at the television or amplifier/receiver.
1 Press [ ÍPOWER].
Setup screen appears.
≥If this unit is...")
RQT9378 15 Setting Easy Setting After connecting your new player and pressing the power button, a screen for the basic settings will appear. Preparation Turn on the television and select the appropriate video input on the television. Reprogramming the remote control for TV/amplifier/receiver control You can operate the TV or amplifier/receiver using the unit’s remote control. Point the remote control at the television or amplifier/receiver. 1 Press [ ÍPOWER]. Setup screen appears. ≥If this unit is...
Page 16
RQT9378 16 Broadband network connection The following services can be used when this unit is connected to broadband. ≥ Firmware can be updated (B right) ≥ You can enjoy the BD-Live ( >22) ≥ You can enjoy the VIERA CAST ( >27) ≥ Use shielded LAN cables when c onnecting to peripheral devices. ≥ With installation where your broadband modem is connected directly to your PC, a router must be installed. ≥Use a router that supports 10BASE-T/100BASE-TX. ≥ In case all available connection on your router is...
Page 17
![Page 17
RQT9378
17
Network settings
These settings are used if you will connect this unit to the Internet.
≥
The connection to the Internet may take time or the Internet may not be
connected depending on the connection environment. (
>35)
It is required that y ou use a broadband connection.
Preparation≥Connect to a broadband network. ( >16)
Testing of “IP Address/DNS Settings”
Always test the connection when a LAN cable is connected.
1 Press [SETUP].
2 Press [ 3,4] to select “Network”
and press [OK].
3 Press...](http://img.usermanuals.tech/thumb/58/64101/w300_dmp-bd60_mul_om_d-16.png "Page 17
RQT9378
17
Network settings
These settings are used if you will connect this unit to the Internet.
≥
The connection to the Internet may take time or the Internet may not be
connected depending on the connection environment. (
>35)
It is required that y ou use a broadband connection.
Preparation≥Connect to a broadband network. ( >16)
Testing of “IP Address/DNS Settings”
Always test the connection when a LAN cable is connected.
1 Press [SETUP].
2 Press [ 3,4] to select “Network”
and press [OK].
3 Press...")
RQT9378 17 Network settings These settings are used if you will connect this unit to the Internet. ≥ The connection to the Internet may take time or the Internet may not be connected depending on the connection environment. ( >35) It is required that y ou use a broadband connection. Preparation≥Connect to a broadband network. ( >16) Testing of “IP Address/DNS Settings” Always test the connection when a LAN cable is connected. 1 Press [SETUP]. 2 Press [ 3,4] to select “Network” and press [OK]. 3 Press...
Page 18
![Page 18
18
RQT9378
Network settings
Setting the connection speed
When the connection test results in “Fail” after the IP and DNS-IP
addresses are assigned, perform the following settings.
After performing steps 1–3 ( >17)
4 Press [ 3,4] to select “Auto Detect
Connection Speed” and press
[2, 1] to select “Off”.
5 Press [ 3,4] to select “Connection
Speed Setting” and press [ 2,1] to
select a connection speed.
≥ Select a connection speed in accordance with the environment of
the network connected.
≥ When the...](http://img.usermanuals.tech/thumb/58/64101/w300_dmp-bd60_mul_om_d-17.png "Page 18
18
RQT9378
Network settings
Setting the connection speed
When the connection test results in “Fail” after the IP and DNS-IP
addresses are assigned, perform the following settings.
After performing steps 1–3 ( >17)
4 Press [ 3,4] to select “Auto Detect
Connection Speed” and press
[2, 1] to select “Off”.
5 Press [ 3,4] to select “Connection
Speed Setting” and press [ 2,1] to
select a connection speed.
≥ Select a connection speed in accordance with the environment of
the network connected.
≥ When the...")
18 RQT9378 Network settings Setting the connection speed When the connection test results in “Fail” after the IP and DNS-IP addresses are assigned, perform the following settings. After performing steps 1–3 ( >17) 4 Press [ 3,4] to select “Auto Detect Connection Speed” and press [2, 1] to select “Off”. 5 Press [ 3,4] to select “Connection Speed Setting” and press [ 2,1] to select a connection speed. ≥ Select a connection speed in accordance with the environment of the network connected. ≥ When the...
Page 19
RQT9378 19 Inserting or removing a media Inserting or removing a disc 1Press [
Page 20
![Page 20
RQT9378
20
Basic play (Playing video contents)
Other operations during play
(These functions may not work depending on the media.)Stop
The stopped position is memorized.
Resume play function Press [1] (PLAY) to restart from this position.
≥ The position is cleared if the tray is opened or you press [∫] several
times to display “STOP” on unit’s display.
≥ [BD-V] : On BD-Video discs including BD-J ( >50), the resume
play function does not work.
≥ [CD] [MP3] [DivX] [MPEG2] : The position is cleared if...](http://img.usermanuals.tech/thumb/58/64101/w300_dmp-bd60_mul_om_d-19.png "Page 20
RQT9378
20
Basic play (Playing video contents)
Other operations during play
(These functions may not work depending on the media.)Stop
The stopped position is memorized.
Resume play function Press [1] (PLAY) to restart from this position.
≥ The position is cleared if the tray is opened or you press [∫] several
times to display “STOP” on unit’s display.
≥ [BD-V] : On BD-Video discs including BD-J ( >50), the resume
play function does not work.
≥ [CD] [MP3] [DivX] [MPEG2] : The position is cleared if...")
RQT9378 20 Basic play (Playing video contents) Other operations during play (These functions may not work depending on the media.)Stop The stopped position is memorized. Resume play function Press [1] (PLAY) to restart from this position. ≥ The position is cleared if the tray is opened or you press [∫] several times to display “STOP” on unit’s display. ≥ [BD-V] : On BD-Video discs including BD-J ( >50), the resume play function does not work. ≥ [CD] [MP3] [DivX] [MPEG2] : The position is cleared if...