Panasonic Dmp B15 Operating Instructions

Network
RQT9334
(E NG)
31
To return to VIERA CAST Home screenPress [VIERA CAST].
To exit from VIERA CAST≥Press [FUNCTIONS], then press [RETURN] to cancel the 
menu.
≥Set the “Network Lock” to “On” to restrict using VIERA CAST. 
(>35)
≥If the audio is distorted while using the VIERA CAST feature 
set the “Audio Auto Gain Control” to “Off” (>35)
≥When the entire picture cannot be displayed on the screen, 
set the “Reduce to Screen Size” to “On”. (>35)
≥Set the “On-screen Language”, to switch the language...

RQT9334
(ENG )
32
S e tti ngs
Changing the unit’s settings
Change the unit’s settings if necessary. The settings remain intact even if you switch the unit to standby.
≥There may be differences in operation methods. If this happens, follow the on-screen instructions for the operation.
To return to the previous screen
Press [RETURN].
To exit the screen
Press [SETUP].≥
Setup menu is also possible to display with the following procedures.
1While stopped, press [SUB MENU]
2Select “Other Functions” with [3,4],...

Settings
RQT9334
(E NG)
33
“Video”
Still Mode (paused video) [BD-V] [AVCHD] [DVD-V]
Select the type of picture shown when you pause playback 
(>48, Frames and fields).≥Auto≥Field: Select if jittering occurs when “Auto” is selected. 
(The picture is coarser.)
≥Frame: Select if small text or fine patterns cannot be seen 
clearly when “Auto” is selected. 
(The picture is clearer and finer.)
Seamless Play ]DVD-VR]
Select the play mode between playlist chapter segments and 
partially deleted titles.≥On: The...

RQT9334
(ENG )
34
Changing the unit’s settings (continued)
“Display”
Status MessagesChoose whether to show status messages automatically.≥Automatic
≥Off
On-screen LanguageChoose the language for these menus and on-screen messages.≥English
≥Français≥Español
Screen Saver FunctionThis is to prevent burn-in on the television screen.≥On:
jNo activity has occurred for 10 minutes or longer, the 
screen swtiches to the other states automatically.
jWhen playing the 4:3 image, the masked-off area on the 
screen...

Settings
RQT9334
(E NG)
35
“Network”
IP Address/DNS Settings (>28)
Proxy Server Settings (>29)
Network Service (>30) (VIERA CAST)
≥Press [OK] to show the following settings.
Network LockYou can restrict using VIERA CAST.
≥Follow the on-screen instructions. Enter a 4-digit password 
with the numbered buttons when the password screen is 
shown. It will be the common password for “DVD-Video 
Ratings”, “BD-Video Ratings” and “Network Lock”.
≥Do not forget your password.≥On≥OffChanging settings (When “On” is...

RQT9334
(ENG )
36
Changing the unit’s settings (continued)
Language code listEnter the code with the numbered buttons.
“Others”
Auto Power Off≥During disc or SD card operation only
Select whether the unit is automatically turned off when about 
15 minutes (about 5 minutes when using the battery pack) have 
elapsed while stopped.≥On≥Off: Select when you do not want to use this function.
Quick StartSpeed of startup from power off is increased.
≥Quick Start only functions when the AC adaptor is...

Reference
Settings
RQT9334
(E NG)
37
Audio and video information
Before connecting, read the table below, and confirm the desired audio type and necessary settings (“BD-Video Secondary Audio”, 
“Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD”). (>33)
≥The number of channels listed is the maximum possible number of output channels.
HDMI AV OUT
≥Also, depending on the specifications or the settings of the amplifier/receiver, the results of the output may vary.
*1 When the connected equipment is not...

RQT9334
(ENG )
38
About MP3/JPEG/DivX 
files
≥English alphabet and Arabic numerals are displayed 
correctly. Other characters may not be displayed correctly.
≥The display order on this unit may differ from how the order is 
displayed on a computer.
≥
Depending on how you create the media (writing software), files 
and folders may not play in the order you numbered them.
≥This unit is not compatible with packet-write format.
≥
Depending on the recording conditions, the media may not play. ≥Operation may...

Reference
RQT9334
(E NG)
39
*1 ISO9660 level 1 or 2 (except for extended formats), Joliet
This unit is compatible with multi-session.
This unit is not compatible with packet writing.
*2 Discs must conform to UDF 2.0.
*3 Discs must conform to UDF 2.5.
*4 Design rule for Camera File system: unified standard 
established by Japan Electronics and Information 
Technology Industries Association (JEITA). 
You can play files on this unit by structure of folders as 
shown below. However depending on the method of...

RQT9334
(ENG )
40
Reference
Indicators and screen messages
Indicators
Screen messages
The [Í] indicator flashes 
rapidly.≥The unit has malfunctioned. Consult your dealer.
The 
[Í] indicator flashes 
slowly.≥“Monitor” on LCD Menu is “Off” (no image). Turn the unit off when no image is being played.
The [CHARGE] indicator 
flashes rapidly.≥There is a problem with the battery pack. Turn the unit on and check the message on the 
LCD. (Dbelow, 41)
The [CHARGE] indicator 
flashes slowly.≥Battery pack charge is...