Panasonic Dmc Fx35 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Dmc Fx35 Operating Instructions Manual. The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 81
![Page 81
81VQT1P09
Advanced (Playback)
Press 3 to select [YES] and then press [MENU/
SET].
Press [‚] to return to the menu screen.
Press [MENU/SET] to close the menu.
Note
Depending on the cut size, the picture size of the trimmed picture may become smaller than
that of the original picture.
The picture quality of the trimmed picture will deteriorate.It may not be possible to trim pictures recorded with other equipment.
You can convert pictures taken with a [W] aspect ratio to a [Y] or a [X] aspect ratio.
Select...](http://img.usermanuals.tech/thumb/58/65585/w300_dmc-fx35_en_om_d-80.png "Page 81
81VQT1P09
Advanced (Playback)
Press 3 to select [YES] and then press [MENU/
SET].
Press [‚] to return to the menu screen.
Press [MENU/SET] to close the menu.
Note
Depending on the cut size, the picture size of the trimmed picture may become smaller than
that of the original picture.
The picture quality of the trimmed picture will deteriorate.It may not be possible to trim pictures recorded with other equipment.
You can convert pictures taken with a [W] aspect ratio to a [Y] or a [X] aspect ratio.
Select...")
81VQT1P09 Advanced (Playback) Press 3 to select [YES] and then press [MENU/ SET]. Press [‚] to return to the menu screen. Press [MENU/SET] to close the menu. Note Depending on the cut size, the picture size of the trimmed picture may become smaller than that of the original picture. The picture quality of the trimmed picture will deteriorate.It may not be possible to trim pictures recorded with other equipment. You can convert pictures taken with a [W] aspect ratio to a [Y] or a [X] aspect ratio. Select...
Page 82
![Page 82
VQT1P0982
Advanced (Playback)
This mode allows you to automatically display pictures vertically if they were recorded holding
the camera vertically or rotate pictures manually in 90o steps.
Select [ROTATE] on the [PLAYBACK] mode menu. (P18)
The [ROTATE] function is disabled when [ROTATE DISP.] is set to [OFF].
Press 2/1 to select the picture and then press
[MENU/SET].
Motion pictures and protected pictures cannot be rotated.
Press 3/4 to select the direction to rotate the
picture and then press...](http://img.usermanuals.tech/thumb/58/65585/w300_dmc-fx35_en_om_d-81.png "Page 82
VQT1P0982
Advanced (Playback)
This mode allows you to automatically display pictures vertically if they were recorded holding
the camera vertically or rotate pictures manually in 90o steps.
Select [ROTATE] on the [PLAYBACK] mode menu. (P18)
The [ROTATE] function is disabled when [ROTATE DISP.] is set to [OFF].
Press 2/1 to select the picture and then press
[MENU/SET].
Motion pictures and protected pictures cannot be rotated.
Press 3/4 to select the direction to rotate the
picture and then press...")
VQT1P0982 Advanced (Playback) This mode allows you to automatically display pictures vertically if they were recorded holding the camera vertically or rotate pictures manually in 90o steps. Select [ROTATE] on the [PLAYBACK] mode menu. (P18) The [ROTATE] function is disabled when [ROTATE DISP.] is set to [OFF]. Press 2/1 to select the picture and then press [MENU/SET]. Motion pictures and protected pictures cannot be rotated. Press 3/4 to select the direction to rotate the picture and then press...
Page 83
![Page 83
83VQT1P09
Advanced (Playback)
You can do the following if a mark has been added to pictures and they have been set as
favorites.
Play back only the pictures set as favorites. ([FAVORITE PLAY])Play back the pictures set as favorites only as a slide show.Delete all the pictures not set as favorites. ([ALL DELETE EXCEPTÜ])
Select [FAVORITE] on the [PLAYBACK] mode menu. (P18)
∫Canceling all the [FAVORITE] settings
1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press 3 to select...](http://img.usermanuals.tech/thumb/58/65585/w300_dmc-fx35_en_om_d-82.png "Page 83
83VQT1P09
Advanced (Playback)
You can do the following if a mark has been added to pictures and they have been set as
favorites.
Play back only the pictures set as favorites. ([FAVORITE PLAY])Play back the pictures set as favorites only as a slide show.Delete all the pictures not set as favorites. ([ALL DELETE EXCEPTÜ])
Select [FAVORITE] on the [PLAYBACK] mode menu. (P18)
∫Canceling all the [FAVORITE] settings
1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press 3 to select...")
83VQT1P09 Advanced (Playback) You can do the following if a mark has been added to pictures and they have been set as favorites. Play back only the pictures set as favorites. ([FAVORITE PLAY])Play back the pictures set as favorites only as a slide show.Delete all the pictures not set as favorites. ([ALL DELETE EXCEPTÜ]) Select [FAVORITE] on the [PLAYBACK] mode menu. (P18) ∫Canceling all the [FAVORITE] settings 1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press 3 to select...
Page 84
![Page 84
VQT1P0984
Advanced (Playback)
Press 3/4 to set the number of prints, and then press [MENU/SET]
to set.
When [MULTI] has been selected, repeat steps 3 and 4 for each picture. (It is not
possible to use the same setting for a multiple number of pictures.)
Press [‚] to return to the menu screen.
Press [MENU/SET] to close the menu.
∫Canceling all the [DPOF PRINT] settings
1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press 3 to select [YES] and then press [MENU/SET].3Press...](http://img.usermanuals.tech/thumb/58/65585/w300_dmc-fx35_en_om_d-83.png "Page 84
VQT1P0984
Advanced (Playback)
Press 3/4 to set the number of prints, and then press [MENU/SET]
to set.
When [MULTI] has been selected, repeat steps 3 and 4 for each picture. (It is not
possible to use the same setting for a multiple number of pictures.)
Press [‚] to return to the menu screen.
Press [MENU/SET] to close the menu.
∫Canceling all the [DPOF PRINT] settings
1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press 3 to select [YES] and then press [MENU/SET].3Press...")
VQT1P0984 Advanced (Playback) Press 3/4 to set the number of prints, and then press [MENU/SET] to set. When [MULTI] has been selected, repeat steps 3 and 4 for each picture. (It is not possible to use the same setting for a multiple number of pictures.) Press [‚] to return to the menu screen. Press [MENU/SET] to close the menu. ∫Canceling all the [DPOF PRINT] settings 1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press 3 to select [YES] and then press [MENU/SET].3Press...
Page 85
![Page 85
85VQT1P09
Advanced (Playback)
You can set protection for pictures you do not want to be deleted by mistake.
Select [PROTECT] on the [PLAYBACK] mode menu. (P18)
Press [‚] to return to the menu screen.
Press [MENU/SET] to close the menu.
∫Canceling all the [PROTECT] settings1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press 3 to select [YES] and then press [MENU/SET].
3Press [MENU/SET] to close the menu.
If you press [MENU/SET] while canceling protection, the canceling will...](http://img.usermanuals.tech/thumb/58/65585/w300_dmc-fx35_en_om_d-84.png "Page 85
85VQT1P09
Advanced (Playback)
You can set protection for pictures you do not want to be deleted by mistake.
Select [PROTECT] on the [PLAYBACK] mode menu. (P18)
Press [‚] to return to the menu screen.
Press [MENU/SET] to close the menu.
∫Canceling all the [PROTECT] settings1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press 3 to select [YES] and then press [MENU/SET].
3Press [MENU/SET] to close the menu.
If you press [MENU/SET] while canceling protection, the canceling will...")
85VQT1P09 Advanced (Playback) You can set protection for pictures you do not want to be deleted by mistake. Select [PROTECT] on the [PLAYBACK] mode menu. (P18) Press [‚] to return to the menu screen. Press [MENU/SET] to close the menu. ∫Canceling all the [PROTECT] settings1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press 3 to select [YES] and then press [MENU/SET]. 3Press [MENU/SET] to close the menu. If you press [MENU/SET] while canceling protection, the canceling will...
Page 86
![Page 86
VQT1P0986
Advanced (Playback)
You can add the audio after taking a picture.
Select [AUDIO DUB.] on the [PLAYBACK] mode menu. (P18)
Note
Audio dubbing may not work properly on pictures recorded by other equipment.
B [AUDIO DUB.]
Press 2/1 to select the picture and then press
[MENU/SET] to start audio recording.
The message [OVERWRITE AUDIO DATA?] screen appears
when audio has already been recorded. Press 3 to select [YES]
and then press [MENU/SET] to start audio recording. (The
original audio is...](http://img.usermanuals.tech/thumb/58/65585/w300_dmc-fx35_en_om_d-85.png "Page 86
VQT1P0986
Advanced (Playback)
You can add the audio after taking a picture.
Select [AUDIO DUB.] on the [PLAYBACK] mode menu. (P18)
Note
Audio dubbing may not work properly on pictures recorded by other equipment.
B [AUDIO DUB.]
Press 2/1 to select the picture and then press
[MENU/SET] to start audio recording.
The message [OVERWRITE AUDIO DATA?] screen appears
when audio has already been recorded. Press 3 to select [YES]
and then press [MENU/SET] to start audio recording. (The
original audio is...")
VQT1P0986 Advanced (Playback) You can add the audio after taking a picture. Select [AUDIO DUB.] on the [PLAYBACK] mode menu. (P18) Note Audio dubbing may not work properly on pictures recorded by other equipment. B [AUDIO DUB.] Press 2/1 to select the picture and then press [MENU/SET] to start audio recording. The message [OVERWRITE AUDIO DATA?] screen appears when audio has already been recorded. Press 3 to select [YES] and then press [MENU/SET] to start audio recording. (The original audio is...
Page 87
![Page 87
87VQT1P09
Advanced (Playback)
You can copy data of pictures you have shot from the built-in memory onto a card, from a card
into the built-in memory or from a card into the dedicated clipboard folder.
Select [COPY] on the [PLAYBACK] mode menu. (P18)
Press 3/4 to select the copy destination and then
press [MENU/SET].
Press 2/1 to select the picture and then press [MENU/SET].
Press 3 to select [YES], and then press [MENU/
SET].
If you press [MENU/SET] while copying pictures from the built-in
memory to...](http://img.usermanuals.tech/thumb/58/65585/w300_dmc-fx35_en_om_d-86.png "Page 87
87VQT1P09
Advanced (Playback)
You can copy data of pictures you have shot from the built-in memory onto a card, from a card
into the built-in memory or from a card into the dedicated clipboard folder.
Select [COPY] on the [PLAYBACK] mode menu. (P18)
Press 3/4 to select the copy destination and then
press [MENU/SET].
Press 2/1 to select the picture and then press [MENU/SET].
Press 3 to select [YES], and then press [MENU/
SET].
If you press [MENU/SET] while copying pictures from the built-in
memory to...")
87VQT1P09 Advanced (Playback) You can copy data of pictures you have shot from the built-in memory onto a card, from a card into the built-in memory or from a card into the dedicated clipboard folder. Select [COPY] on the [PLAYBACK] mode menu. (P18) Press 3/4 to select the copy destination and then press [MENU/SET]. Press 2/1 to select the picture and then press [MENU/SET]. Press 3 to select [YES], and then press [MENU/ SET]. If you press [MENU/SET] while copying pictures from the built-in memory to...
Page 88
VQT1P0988 Connecting to other equipment Connecting to other equipmentConnecting to a PC You can acquire recorded pictures to a PC by connecting the camera and the PC.You can easily print out or mail the pictures you have imported. Use of the “PHOTOfunSTUDIO-viewer-” bundled software on the CD-ROM (supplied) is a convenient way of doing this. Preparations: Turn on the camera and the PC. Remove the card before using the pictures in the built-in memory. Connect the camera to a PC via the USB connection...
Page 89
![Page 89
89VQT1P09
Connecting to other equipment
Using a drag-and-drop operation, move the pictures you want to
acquire or the folder storing those pictures to any different folder on
the PC.
∫Disconnecting the USB connection cable safely
Proceed with the hardware removal using “Safely Remove Hardware” on the task tray of the
PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of the
digital camera before removing the hardware.
Note
Do not use any other USB connection...](http://img.usermanuals.tech/thumb/58/65585/w300_dmc-fx35_en_om_d-88.png "Page 89
89VQT1P09
Connecting to other equipment
Using a drag-and-drop operation, move the pictures you want to
acquire or the folder storing those pictures to any different folder on
the PC.
∫Disconnecting the USB connection cable safely
Proceed with the hardware removal using “Safely Remove Hardware” on the task tray of the
PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of the
digital camera before removing the hardware.
Note
Do not use any other USB connection...")
89VQT1P09 Connecting to other equipment Using a drag-and-drop operation, move the pictures you want to acquire or the folder storing those pictures to any different folder on the PC. ∫Disconnecting the USB connection cable safely Proceed with the hardware removal using “Safely Remove Hardware” on the task tray of the PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of the digital camera before removing the hardware. Note Do not use any other USB connection...
Page 90
![Page 90
VQT1P0990
Connecting to other equipment
Printing the Pictures
If you connect the camera to a printer supporting PictBridge, you can select the pictures to be
printed out and instruct that printing be started on the camera’s LCD monitor.
Preparations:
Turn on the camera and the printer.
Remove the card before printing the pictures in the built-in memory.
Perform the print quality and other settings at the printer before printing the pictures.
Set the mode dial to anything except [¨].
Connect the camera...](http://img.usermanuals.tech/thumb/58/65585/w300_dmc-fx35_en_om_d-89.png "Page 90
VQT1P0990
Connecting to other equipment
Printing the Pictures
If you connect the camera to a printer supporting PictBridge, you can select the pictures to be
printed out and instruct that printing be started on the camera’s LCD monitor.
Preparations:
Turn on the camera and the printer.
Remove the card before printing the pictures in the built-in memory.
Perform the print quality and other settings at the printer before printing the pictures.
Set the mode dial to anything except [¨].
Connect the camera...")
VQT1P0990 Connecting to other equipment Printing the Pictures If you connect the camera to a printer supporting PictBridge, you can select the pictures to be printed out and instruct that printing be started on the camera’s LCD monitor. Preparations: Turn on the camera and the printer. Remove the card before printing the pictures in the built-in memory. Perform the print quality and other settings at the printer before printing the pictures. Set the mode dial to anything except [¨]. Connect the camera...