Panasonic Dmc Fx33 Operating Instructions Manual

Advanced (Recording pictures)
61VQT1J82
Press [ ] to display the [REC] mode 
menu and select the item to set. (P55)
You can record audio with the still picture if 
this is set to [ON]. This means you can 
record the conversation that took place 
when you were recording or an explanation 
of the picture.
 [ ] appears on the screen when you set 
[AUDIO REC.] to [ON].
 Focus on the subject and press the 
shutter button to start recording. 
Recording will automatically stop about 
5 seconds later. There is...

Advanced (Recording pictures)
62VQT1J82
∫About face detection
This function detects a person’s face in the 
image area so that the focus can be 
adjusted properly. This is particularly 
effective in preventing errors such as when 
the focus is on the background when taking 
a commemorative photograph. 
 When the camera detects a person’s face, 
the following color AF area is displayed.
Ye l l o w :
When the shutter button is pressed 
halfway, the frame turns green when the 
camera is focused.
White:...

Advanced (Recording pictures)
63VQT1J82
Press [ ] to display the [REC] mode 
menu and select the item to set. (P55)
∫About the jitter/movement detection 
demonstration screen
Press [DISPLAY] to display [JITTER, 
SUBJ. MOVE DEMO] when the 
[STABILIZER] screen is displayed. 
(Pictures cannot be recorded when the 
[JITTER, SUBJ. MOVE DEMO] screen 
appears.) 
Press [DISPLAY] again to finish this mode.
AJitter detection demonstration
BMovement detection demonstration
 It is also possible to display this...

Advanced (Recording pictures)
64VQT1J82
 The number of pictures indicated is when 
the shutter speed is faster than 1/60 and 
the flash is not activated.
 The burst speed (pictures/second) may 
become slower depending on the 
recording environment such as in dark 
places, if the ISO sensitivity is high etc.
 If you take pictures in burst mode with the 
built-in memory, it will take time to write 
the picture data.
 Hold down the shutter button fully to 
activate the burst mode.
 You can have higher speed...

Advanced (Recording pictures)
65VQT1J82
[AF ASSIST LAMP] to [OFF]. In this case, 
it will become more difficult to focus on the 
subject.
• The setting for [AF ASSIST LAMP] is fixed  to [ON] in intelligent auto mode[ ].
 The setting for the [AF ASSIST LAMP] is  fixed to [OFF] in [SELF PORTRAIT], 
[SCENERY], [NIGHT SCENERY], 
[SUNSET], [FIREWORKS] and 
[AERIAL PHOTO] in scene mode.
 The initial setting for [PET] in scene mode  is [OFF]. (P41)
Press [ ] to display the [REC] mode 
menu and select the item...

Advanced (Recording pictures)
66VQT1J82
Taking and viewing 
clipboard pictures 
(Clipboard mode)
This setting is useful when taking pictures 
of timetables, route maps or other 
information instead of taking notes. 
Regardless of whether a card is present 
or not, the data is stored in the 
dedicated clipboard folder of the built-in 
memory so it can be differentiated from the 
regular taken pictures and made available 
for immediate viewing.
∫Taking clipboard pictures
1Press 4 to select [REC] and then...

Advanced (Recording pictures)
67VQT1J82
∫Viewing clipboard pictures
1Press 3 to choose [PLAY] and 
then press [MENU/SET].
2Press 2/1 to move the picture.
When the zoom lever is turned to 
[ ] (W), a screen showing 9 
pictures appears. To return to the 
full-screen display, turn the zoom 
lever to [
] (T).
 To switch to clipboard recording at any 
point while viewing clipboard pictures, 
press the shutter button halfway 
([ ]).
 The [PLAY] mode menu  (P74) function 
cannot be used.

When the pictures...

Advanced (Recording pictures)
68VQT1J82
∫Enlarging clipboard pictures and 
storing them in the memory (zoom 
marks)
This function is useful for enlarging parts of 
maps, for instance, and storing them in the 
memory. For details on how to enlarge 
pictures, refer to playback zoom on page 
70.
Rotate the zoom lever, decide on 
the enlargement size and 
position, and then press [MENU/
SET].
 The zoom mark ([ ]) A now appears 
on the picture stored in the memory.
 To change the zoom magnification or...

Advanced (Playback)
69VQT1J82
Advanced (Playback)
Displaying Multiple 
Screens (Multi Playback)
1Rotate the zoom lever towards 
[ ] [W] to display multiple 
screens.
(Screen when 9 screens are displayed)
 :1 screen>9 screens>
25 screens>Calendar screen display 
(P69)
 Rotate the zoom lever towards [ ] [T] 
to return to the previous screen.
2Press 3/4/2/1 to select a 
picture.
ANumber of the selected picture and the 
total number of recorded pictures
 Depending on the recorded picture and 
the setting,...

Advanced (Playback)
70VQT1J82
1Rotate the zoom lever several 
times towards [ ] (W) to display 
the calendar screen.
 The recording date of the picture 
selected in the playback screen 
becomes the date selected when the 
calendar screen is first displayed.
 If there are multiple pictures with the 
same recording date, the first picture 
recorded on that day is displayed.
2Press 3/4/2/1 to select the 
date to be played back.
3/4: Select the month
2/1: Select the date
 If there were no pictures recorded...