Panasonic Dmc Fx100 Operating Instructions Manual

Advanced (Recording pictures)
61VQT1F52
 You can also press the shutter button 
halfway to finish.
∫Finely adjusting the white balance 
[]
Use this to set the white balance manually.
 Set the white balance to 
[ ]/[ ]/[ ]/[ ]/[ ].
1Press 3 [ ] several times until 
[WB ADJUST.] appears and then 
press 2/1 to adjust the white 
balance.
2 [RED]:Press when the hue is bluish.
1 [BLUE]:Press when the hue is 
reddish.
 Select [0] to return to the original white 
balance.
2Press [MENU/SET] to finish.
You can...

Advanced (Recording pictures)
62VQT1F52
Press [ ] to display the [REC] mode 
menu and select the item to set. (P59)
ISO is a measure of sensitivity to light. The 
higher the sensitivity is set, the less light is 
needed to take a picture so the camera 
becomes more suitable for recording in 
dark places.
 When setting to [AUTO], the ISO 
sensitivity is automatically adjusted to a 
maximum of [ISO200] according to the 
brightness. (It can be adjusted to a 
maximum of [ISO640] when using the 
flash.)
 To...

Advanced (Recording pictures)
63VQT1F52
Press [ ] to display the [REC] mode 
menu and select the item to set. (P59)
A digital picture is made of numerous dots 
called pixels. Although you cannot see the 
difference on the camera’s screen, the 
more pixels the finer the picture will be 
when it is printed on a large piece of paper 
or displayed on a PC monitor. Picture 
quality refers to the compression rate when 
saving digital pictures.
AMany pixels (Fine)
BFew pixels (Rough)
¢These pictures are...

Advanced (Recording pictures)
64VQT1F52
 In simple mode [ ], the settings become 
as follows.
– [ ENLARGE]:
: (12M)/
–[ 4qk6q/10k15cm]:
: (2.5M EZ)/
–[ E-MAIL]:
: (0.3M EZ)/
Press [ ] to display the [REC] mode 
menu and select the item to set. (P59)
You can record audio with the still picture if 
this is set to [ON]. This means you can 
record the conversation that took place 
when you were recording or an explanation 
of the picture.
 [ ] appears on the screen when you set 
[AUDIO REC.] to [ON].
 Focus...

Advanced (Recording pictures)
65VQT1F52
Press [ ] to display the [REC] mode 
menu and select the item to set. (P59)
Select the mode that matches the 
recording conditions and the composition.∫About [ ] or [ ]
 You can focus on the subject more quickly 
than other AF modes.
 The picture may stop moving for a 
moment before being brought into focus 
when you press the shutter button 
halfway. This is not a malfunction.
 The AF area displayed is bigger than 
usual when taking pictures in dark places 
or...

Advanced (Recording pictures)
66VQT1F52
Press [ ] to display the [REC] mode 
menu and select the item to set. (P59)
∫About the jitter/movement detection 
demonstration screen
Press 1 to display [JITTER, SUBJ. MOVE 
DEMO.] when the [STABILIZER] screen is 
displayed. (Pictures cannot be recorded 
when the [JITTER, SUBJ. MOVE DEMO.] 
screen appears.) 
Press 1 again to finish this mode.
AJitter detection demonstration
BMovement detection demonstration
 The camera automatically detects the 
jitter and the...

Advanced (Recording pictures)
67VQT1F52
Press [ ] to display the [REC] mode 
menu and select the item to set. (P59)
∫Number of pictures recorded in burst 
mode
¢The burst speed is constant regardless 
of the transfer speed of the card.
 The number of pictures indicated is when 
the shutter speed is faster than 1/60 and 
the flash is not activated.
 The burst speed (pictures/second) may 
become slower depending on the 
recording environment such as in dark 
places, if the ISO sensitivity is high etc.
 If...

Advanced (Recording pictures)
68VQT1F52
Press [ ] to display the [REC] mode 
menu and select the item to set. (P59)
Illuminating the subject makes it easier for 
the camera to focus when recording in low 
light conditions that make focusing difficult.
 If the AF assist lamp is 
set to [ON], an AF area 
with a size wider than 
usual is displayed and the 
AF assist lamp A turns 
on when you press the shutter button 
halfway in dark places etc.
 Be careful about the following when using 
the AF assist...

Advanced (Recording pictures)
69VQT1F52
Press [ ] to display the [REC] mode 
menu and select the item to set. (P59)
Select a color effect that matches the 
recording conditions and your image of the 
recording.Press [ ] to display the [REC] mode 
menu and select the item to set. (P59)
Select an effect that matches the recording 
situation and your image of the recording.
 When you take pictures in dark places, 
noise may become visible. To avoid 
picture noise, we recommend setting 
[NOISE REDUCTION] in...

Advanced (Playback)
70VQT1F52
Advanced (Playback)
Displaying Multiple 
Screens (Multi Playback)
1Rotate the zoom lever towards 
[ ] [W] to display multiple 
screens.
(Screen when 9 screens are displayed)
 :1 screen>9 screens>
25 screens>Calendar screen display 
(P71)
 Rotate the zoom lever towards [ ] [T] 
to return to the previous screen.
2Press 3/4/2/1 to select a 
picture.
ANumber of the selected picture and the 
total number of recorded pictures
 Depending on the recorded picture and 
the setting,...