Panasonic Dmc Fx07 Operating Instructions Manual

							Menu Settings
81VQT0Y69
2Press [MENU/SET] to close the 
menu.
3Press 21 to select the picture 
then press 3.
 Repeat the above procedure.
If 3 is pressed while the [ ] favorites 
icon A is displayed, [ ] is cleared, and 
the favorites setting is canceled.
 You can set up to 999 pictures as 
favor ite s.
∫Deleting all favorites
1Select [CANCEL] on the screen shown in 
step 
1 and then press [MENU/SET].
2Press 3 to select [YES] and then press 
[MENU/SET].
3Press [MENU/SET] to close the menu.
 When printing pictures at a photo printing 
store, [ALL DELETE EXCEPT ] (P34) is 
useful so only the pictures you want to be 
printed remain on the card.
 Use [LUMIX Simple Viewer] on the 
CD-ROM (supplied), to set, confirm or 
delete favorites. (For information about 
this, refer to the separate operating 
instructions for PC connection.)
 You may not be able to set pictures taken 
with other equipment as favorites.Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P79)
This mode allows you to automatically 
display pictures vertically if they were 
recorded holding the camera vertically or 
rotate pictures manually in 90° steps.
∫Rotate display
(The picture is automatically rotated 
and displayed.)
1Press 4 to select [ON] and then 
press [MENU/SET].
 The pictures are displayed without 
being rotated when you select [OFF].
 Refer to P33 for information about how 
to play back pictures.
2Press [MENU/SET] to close the 
menu.
∫Rotate
(The picture is rotated manually.)
1Press 21 to select the picture 
and then press 4.
 The [ROTATE] function is disabled 
when [ROTATE DISP.] is set to [OFF].
 Motion pictures and protected pictures 
cannot be rotated.
1/3
10:00  DEC. 1.2006
[ROTATE DISP.]/[ROTATE]
To display the picture rotated
/SETMENU
PLAY1/3
ON OFF
SETMENU
OFF
ON
DPOF PRINT
FAVORITEROTATE DISP.ROTATE
SLIDE SHOW
SELECT/SETMENU
ROTATE
SELECT
SET
1/3
EXITMENU
VQT0Y69ENG.book  81 ページ  ２００６年６月３０日　金曜日　午前１１時７分 
						

							Menu Settings
82VQT0Y69
2Press 34 to select the direction 
to rotate the picture and then 
press [MENU/SET].
3Press [MENU/SET] twice to close 
the menu.
∫Example
When rotating clockwise ( )
Original
picture
 When [ROTATE DISP.] is set to [ON], 
pictures recorded holding the camera 
vertically are played back vertically 
(rotated).
 If you take pictures when aiming the 
camera up or down, it may not be possible 
to display the pictures vertically. (P25)
 The picture may be slightly blurred when 
the camera is connected to the TV with 
the AV cable (supplied) and played back 
vertically.
 When you play back pictures on a PC, 
they cannot be displayed in the rotated 
direction unless the OS or software is 
compatible with Exif. Exif is a file format 
for still pictures which allows recording 
information etc. to be added. It was established by “JEITA (Japan Electronics 
and Information Technology Industries 
Association)”.
 Rotated pictures are displayed rotated 
when they are played back in review 
playback and playback zoom however are 
displayed without being rotated when they 
are played back in multi playback.
 It may not be possible to rotate pictures 
that have been recorded with other 
equipment.
Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P79)
DPOF “Digital Print Order Format” is a 
system that allows the user to select which 
pictures to print, how many copies of each 
picture to print and whether or not to print 
the recording date on the pictures when 
using a DPOF compatible photo printer or 
photo printing store. For details, ask at your 
photo printing store.
When you want to use a photo printing 
store to print pictures recorded on the 
built-in memory, copy them to a card (P89) 
and then set the DPOF setting. (DMC-FX3)
For more information visit:
http://panasonic.jp/dc/dpof_110/white_e.htm
Press 34 to select [SINGLE], 
[MULTI] or [CANCEL] and then 
press [MENU/SET].
 You cannot select [CANCEL] if there 
are no prints that have been set in the 
DPOF print settings. The picture rotates clockwise in 
steps of 90°.
The picture rotates 
counter-clockwise in steps of 90°.
ROTATE
SELECTSETMENUCANCEL/SETMENU
[DPOF PRINT]
Setting the picture to print and the 
number of prints
/SETMENU
PLAY1/3
ON OFFFAVORITEROTATE DISP.ROTATE
SLIDE SHOW
SINGLE
MULTI
CANCELDPOF PRINT/SETMENUSETMENUSELECT
VQT0Y69ENG.book  82 ページ  ２００６年６月３０日　金曜日　午前１１時７分 
						

							Menu Settings
83VQT0Y69
∫Single setting
1Press 21 to select the picture 
to print and then press 34 to 
set the number of prints.
 The number of prints icon [ ] A 
appears.
 The number of prints can be set from 
0 to 999. The DPOF print setting is 
canceled when the number of prints is 
set to [0].
2Press [MENU/SET] twice to close 
the menu.
∫Multi setting
1Press 21 to select the picture 
to print and then press 34 to 
set the number of prints.
 The number of prints icon [ ] B 
appears.
 Repeat the above procedure. (You 
cannot set all the pictures at one time.)
 The number of prints can be set from 
0 to 999. The DPOF print setting is 
canceled when the number of prints is 
set to [0].
2Press [MENU/SET] twice to close 
the menu.
∫To cancel all settings
1Press 3 to select [YES] and then 
press [MENU/SET].
2Press [MENU/SET] to close the 
menu.
∫To print the date
After setting the number of prints, set/
cancel printing with the recording date by 
pressing [DISPLAY].
 The date print icon [ ] C appears.
 When you go to a photo printing store for 
digital printing, be sure to order the 
printing of the date additionally if required.
 Depending on the photo printing store or 
the printer, the date may not be printed 
even if you set to print the date. For further 
information, ask at your photo printing 
store or refer to the operating instructions 
for the printer.
DATEDISPLAY
1DPOF SET THIS
COUNT1SELECT
1/14
EXITMENU
DATEDISPLAYCOUNT1
DPOF SET MULTI
SELECTEXITMENU
798
111210
1
CANCEL ALL DPOF
CANCEL ALL DPOF
PRINT SETTINGS?
SELECTSET
NOYES
MENU/SETMENU
DATEDISPLAY
DPOF SET THIS1
COUNT1
1/14
SELECTEXITMENU
DATE
DATE
VQT0Y69ENG.book  83 ページ  ２００６年６月３０日　金曜日　午前１１時７分 
						

							Menu Settings
84VQT0Y69
 DPOF is an abbreviation of “Digital Print 
Order Format”. This feature allows you to 
write print information to media and then 
use the information on a DPOF-compliant 
system.
 DPOF print setting is a convenient 
function when printing pictures with a 
printer that supports PictBridge. The date 
printing setting on the printer may take 
priority over the date printing setting on 
the camera. Check the date printing 
setting on the printer also. (P94)
 It is necessary to delete all previous 
DPOF print information made on other 
equipment when setting DPOF print on 
the camera.
 If the file is not based on the DCF 
standard, the DPOF print setting cannot 
be set. DCF is an abbreviation of “Design 
rule for Camera File system”, stipulated by 
“JEITA (Japan Electronics and Information 
Technology Industries Association)”.Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P79)
You can set protection for pictures you do 
not want to be deleted by mistake.
Press 34 to select [SINGLE], 
[MULTI] or [CANCEL] and then 
press [MENU/SET].
∫Single setting
1Press 21 to select the picture 
and then press 
4 to SET/CANCEL.
2Press [MENU/SET] twice to close 
the menu.
[PROTECT]
Preventing accidental erasure of 
pictures
[SET]The protect icon [ ] A 
appears.
[CANCEL]The protect icon [ ] A 
disappears.
/SETMENU
PLAY2/3
ON OFFRESIZETRIMMING
AUDIO DUB.SINGLE
MULTI
CANCELPROTECT
SETMENUSELECTASPECT CONV./SETMENU
SET/CANCEL
PROTECT THIS
SELECT
1/3100_
0001
EXITMENU
VQT0Y69ENG.book  84 ページ  ２００６年６月３０日　金曜日　午前１１時７分 
						

							Menu Settings
85VQT0Y69
∫Multi setting/To cancel all settings
Perform the same operation as in 
“[DPOF PRINT] Setting the picture to print 
and the number of prints”. (P82 to 84)
 If you press [MENU/SET] while canceling 
protection, the canceling will stop halfway.
 The protect setting may not be effective 
on other equipment.
 If you want to delete protected pictures, 
cancel their protection.
 Even if you protect pictures in the built-in 
memory (DMC-FX3) or a card, they will be 
deleted if the built-in memory (DMC-FX3) 
or the card is formatted. (P90)
 Even if you do not protect pictures on an 
SD Memory Card or an SDHC Memory 
Card, they cannot be deleted when the 
card’s Write-Protect switch B is set to 
[LOCK].
 The following functions cannot be used 
with protected pictures.
–[ROTATE]
– [AUDIO DUB.]Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P79)
You can add the audio after taking a 
picture.
1Press 21 to select the picture 
and then press 4 to start audio 
recording.
 The message [OVERWRITE AUDIO 
DATA?] screen appears when audio has 
already been recorded. Press 3 to 
select [YES] and then press [MENU/
SET] to start audio recording. (The 
original audio is overwritten.)
 Audio dubbing cannot be used with the 
following pictures.
– Motion pictures
– Protected pictures
 Audio dubbing may not work properly on 
pictures recorded by other equipment.
2Press 4 to stop recording.
 The audio recording stops 
automatically if 4 is not pressed after 
about 10 seconds.
3Press [MENU/SET] twice to close 
the menu.
16
[AUDIO DUB.] 
Adding audio after taking pictures
/SETMENU
AU DIODUB.
STARTSELECT
1/3100_
0001
EXITMENU
AUDIODUB.
STOP
1/3100_
0001
VQT0Y69ENG.book  85 ページ  ２００６年６月３０日　金曜日　午前１１時７分 
						

							Menu Settings
86VQT0Y69
Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P79)
This function is useful if you want to reduce 
the file size of a picture to attach it to an 
e-mail or upload it to a website.
1Press 21 to select the picture 
and then press 4.
 The following pictures cannot be 
resized.
– Pictures recorded in [ ] (0.3M EZ)
(When the aspect ratio setting is 
[].)
– Pictures recorded in [ ] (2.5M EZ)
(When the aspect ratio setting is 
[].)
– Pictures recorded in [ ] (2M EZ)
(When the aspect ratio setting is 
[].)
– Motion pictures
– Pictures with audio
 It may not be possible to resize pictures 
recorded with other equipment.
2Press 21 to select the size and 
then press 4.
 Sizes smaller than the recorded picture 
are displayed.
– [ ] (DMC-FX07)/[ ]/[ ]/[ ]/
[]
(When the aspect ratio setting is 
[].)
–[ ]
(When the aspect ratio setting is 
[].)
–[ ]
(When the aspect ratio setting is 
[].)
 The message [DELETE ORIGINAL 
PICTURE?] appears.
3Press 34 to select [YES] or 
[NO] and then press [MENU/SET].
 The picture is overwritten when you 
select [YES]. Resized pictures cannot 
be restored when they are overwritten.
 A resized picture is newly created when 
you select [NO].
 If the original picture is protected, you 
cannot overwrite it. Select [NO] and 
newly create a resized picture.
4Press [MENU/SET] twice to close 
the menu.
[RESIZE]
Making the picture smaller
/SETMENU
RESIZE
EXITSET SELECT
1/3
MENU
RESIZE
EXITRESIZE SELECT
1/3
MENU
RESIZE
DELETE ORIGINAL
PICTURE?
NOYES
SETMENUSELECTCANCEL/SETMENU
VQT0Y69ENG.book  86 ページ  ２００６年６月３０日　金曜日　午前１１時７分 
						

							Menu Settings
87VQT0Y69
Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P79)
You can enlarge and then clip the important 
part of the recorded picture.
1Press 21 to select the picture 
and then press 4.
 The following pictures cannot be 
trimmed.
– Motion pictures
– Pictures with audio
 It may not be possible to trim pictures 
recorded with other equipment.
2Enlarge or decrease the parts to 
be trimmed with the zoom lever.
3Press 3/4/2/1 to move the 
position of the part to be trimmed.
4Press the shutter button.
 The message [DELETE ORIGINAL 
PICTURE?] appears.
5Press 34 to select [YES] or 
[NO] and then press [MENU/SET].
 The picture is overwritten when you 
select [YES]. The trimmed pictures 
cannot be restored when they are 
overwritten.
 A trimmed picture is newly created 
when you select [NO].
 When the original picture is protected, 
you cannot overwrite it. Select [NO] and 
newly create a trimmed picture.
6Press [MENU/SET] twice to close 
the menu.
 Depending on the cut size, the picture size 
of the trimmed picture may become 
smaller than that of the original picture.
 The picture quality of the trimmed picture 
will deteriorate.
[TRIMMING]
Enlarging a picture and trimming it
/SETMENU
TRIMMING
EXITSELECTSET
1/3
MENU
ZOOMEXIT
TRIMMING
1/3
MENU
TW
TRIM:SHUTTER ZOOMEXIT
TRIMMING
1/3
MENU
DELETE ORIGINAL
PICTURE? TRIMMING
NO
SELECTSETMENUCANCEL
YES
/SETMENU
VQT0Y69ENG.book  87 ページ  ２００６年６月３０日　金曜日　午前１１時７分 
						

							Menu Settings
88VQT0Y69
Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P79)
You can convert pictures taken with a 
[ ] aspect ratio to a [ ] or a [ ] 
aspect ratio.
1Press 3/4 to select [ ] or 
[ ] and then press [MENU/
SET].
 Only pictures taken with a [ ] 
aspect ratio can be converted.
 You may not be able to convert pictures 
taken on other equipment.
2Press 2/1 to select a picture and 
then press 4.
 If you select and set a picture with an 
aspect ratio other than [ ], the 
message [CANNOT BE SET ON THIS 
PICTURE] is displayed on the screen.
3Press 21 to determine the 
horizontal position and press the 
shutter button to set.
 Use 3/4 to set the frame position for 
pictures rotated vertically.
 The message [DELETE ORIGINAL 
PICTURE?] appears.
4Press 3/4 to select [YES] or 
[NO] and then press [MENU/SET].
 The picture is overwritten when you 
select [YES]. If you convert the aspect 
ratio of a picture and then overwrite it, 
you cannot restore it.
 A picture with the converted aspect ratio 
is newly created when you select [NO].
 When the original picture is protected, 
you cannot overwrite it. Select [NO] and 
newly create a picture with the 
converted aspect ratio.
5Press [MENU/SET] twice to close 
the menu.
 After converting the aspect ratio, the 
picture size may become larger than that 
of the original picture.
 The following pictures cannot be 
converted.
– Pictures with audio
– Motion pictures
 Files that do not conform to the DCF 
standard cannot be converted. DCF is an 
abbreviation of “Design rule for Camera 
File system”, stipulated by “JEITA (Japan 
Electronics and Information Technology 
Industries Association)”.
[ASPECT CONV.]
Changing the aspect ratio of a 16:9 
picture
/SETMENU
PLAY2/3
RESIZETRIMMING
AUDIO DUB.PROTECT
SETMENUSELECT/SETMENUASPECT CONV.
SETSELECT
ASPECTCONV.100_
00011/3
EXITMENU
EXITMENUSET : SHUTTER ADJUST.
DELETE ORIGINAL
PICTURE? ASPECT CONV.
NOYES
/SETMENUSELECTSETMENUCANCEL
VQT0Y69ENG.book  88 ページ  ２００６年６月３０日　金曜日　午前１１時７分 
						

							Menu Settings
89VQT0Y69
Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P79)
You can copy recorded picture data from 
the built-in memory to a card or vice versa.
1Press 34 to select the copy 
destination and then press 
[MENU/SET].
:
All the picture data in the built-in 
memory are copied onto the card at 
one time.
(Perform step 
3)
:
One picture at a time is copied from the 
card to the built-in memory.
(Perform step 
2)
2Press 21 to select the picture 
and then press 4.
 When you copy picture data from the 
built-in memory to the card, all the 
pictures are selected at one time so this 
screen does not appear.
3Press 3 to select [YES] and then 
press [MENU/SET].
(The illustration shows the screen when 
pictures are copied from the built-in 
memory to a card.)
 The message [COPY THIS PICTURE 
TO BUILT-IN MEMORY?] appears when 
you copy pictures from the card to the 
built-in memor y.
 If you press [MENU/SET] while copying 
pictures from the built-in memory to the 
card, the copying will stop halfway.
 Do not turn the camera off or perform 
any other operations before copying is 
finished. The data on the built-in 
memory or the card may be damaged 
or lost.
4Press [MENU/SET] several times 
to close the menu.
 If you copy picture data from the built-in 
memory to a card, the screen 
automatically returns to the playback 
screen when all the pictures are copied.
 If you copy picture data from the built-in 
memory to a card, we recommend using a 
card which has more free space than the 
built-in memory (about 13.5 MB).
 It may take time to copy the picture data.
 Only pictures recorded with a Panasonic 
digital camera (LUMIX) will be copied.
(Even if the pictures were recorded with a 
Panasonic digital camera, you may not be 
able to copy them if they were edited with 
a PC.)
[COPY] (DMC-FX3)
Copying the picture data
/SETMENU
PLAY3/3
FORMATCOPY
SETMENUSELECT/SETMENU
COPY
EXIT SELECTSETMENU
100_
00011/3
COPY
SELECT
SETMENU
COPY PICTURES FROM
BUILT-IN MEMORY TO
MEMORY CARD ?
NOYES
/SETMENU
VQT0Y69ENG.book  89 ページ  ２００６年６月３０日　金曜日　午前１１時７分 
						

							Menu Settings
90VQT0Y69
 DPOF settings on the original picture data 
will not be copied. Set the DPOF settings 
again after copying is finished. (P82)
 If a picture with the same name as the 
picture to be copied exists in the copy 
destination, the picture will not be copied. 
(P104)
 If you copy picture data from the built-in 
memory to a card which does not have 
sufficient free space, the picture data will 
only be copied halfway.
Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P79)
Usually, it is not necessary to format the 
built-in memory (DMC-FX3) and the card. 
Format them when the message 
[BUILT-IN MEMORY ERROR] (DMC-FX3) 
or [MEMORY CARD ERROR] appears.
Press 3 to select [YES] and then 
press [MENU/SET].
 When a card is not inserted, you can 
format the built-in memory. When a 
card is inserted, you can format the 
card. (DMC-FX3)
 If you press [MENU/SET] while 
formatting the built-in memory, the 
formatting will stop halfway. (However, 
all the pictures will be deleted.) 
(DMC-FX3)
 Formatting irretrievably deletes all the 
data including any protected pictures. 
Check the data carefully before 
formatting.
 If the card has been formatted on a PC or 
other equipment, format it on the camera 
again.
 Use a battery with sufficient battery power 
(P13) or the AC adaptor (DMW-AC5; 
optional) when formatting.
 Do not turn the camera off during 
formatting.
 It may take longer to format the built-in 
memory than the card. (Max. about 
15 sec.) (DMC-FX3)
 You cannot format an SD Memory Card or 
an SDHC Memory Card when the card’s 
Write- Protect switch A is set to [LOCK].
 If the built-in memory (DMC-FX3) or the 
card cannot be formatted, consult your 
nearest servicenter.
[FORMAT] 
Initializing the card
/SETMENU
FORMAT
DELETE ALL DATA
ON THE MEMORY CARD?
NOYES
SELECTSETMENU/SETMENU
16
For USA assistance, please call: 1-800-272-7033 
or send e-mail to : [email protected]
For Canadian assistance, please call:
1-800-561-5505 or visit us at www.panasonic.ca
VQT0Y69ENG.book  90 ページ  ２００６年６月３０日　金曜日　午前１１時７分