Panasonic Dmc Fx07 Operating Instructions Manual

Others
101VQT0Y69
CIn playback
1 Playback mode (P33)
2 Number of DPOF prints (P82)
3 Protected picture (P84)
4 Picture with audio/Motion pictures 
(P68)
5 Picture size (P74)
6 Quality (P74)
In Motion picture mode (P68)
/// (4:3)
/  (16:9)
In Simple mode (P27)
:ENLARGE
:4qk6q/10k15cm
:E-MAIL
7 Battery indication (P13)
8 Folder/File number (P92)
Access indication (DMC-FX3)
/ : Card (P16)
/ : Built-in memory (P17)
9 Picture number/Total pictures10 Cable disconnection warning icon (P97)
 This is displayed...

Others
102VQT0Y69
Cautions for Use
∫Optimal use of the camera
Take care not to drop or knock the unit 
or put a lot of pressure on it.
 We strongly recommend 
you do not leave the 
camera in your pants 
pocket when you sit down 
or forcefully insert it into a 
full or tight bag etc. 
Damage to the LCD 
monitor or personal injury 
may result.
 Take care not to knock or drop the bag/
case that you inserted the camera in as 
the shock may cause damage to the 
camera, lens or LCD monitor.
 Do not attach...

Others
103VQT0Y69
∫Card
Do not leave the card where the 
temperature is high, where 
electromagnetic waves or static 
electricity are easily generated or 
exposed to direct sunlight. 
Do not bend or drop the card. 
 The card may be damaged or the recorded 
content may be damaged or deleted.
 Put the card in the card case or the 
storage bag after use and when storing or 
carrying the card.
 Do not allow dirt, dust or water to get into 
the terminals on the back of the card and do 
not touch the...

Others
104VQT0Y69
Message Display
Confirmation messages or error messages 
will be displayed on the screen in some 
cases.
The major messages are described below 
as examples.
[THIS MEMORY CARD IS PROTECTED]
The Write-Protect switch on the SD 
Memory Card and the SDHC Memory Card 
are moved to [LOCK]. Move the switch 
back to unlock it. (P16, 85, 90)
[NO VALID PICTURE TO PLAY]
Record a picture or insert a card with a 
recorded picture and then play it.
[THIS PICTURE IS PROTECTED]
Delete or overwrite the...

Others
105VQT0Y69
[PLEASE TURN CAMERA OFF AND 
THEN ON AGAIN]
This message appears when the camera is 
not operating properly. Turn the camera off 
and on. If the message persists, contact the 
dealer or your nearest servicenter.
[MEMORY CARD ERROR
PLEASE CHECK THE CARD]
 An error has occurred accessing the card. 
Insert the card again.
[READ ERROR
PLEASE CHECK THE CARD]
An error has occurred reading the data.
Insert the card again. Make sure the card is 
inserted properly and then play back again....

Others
106VQT0Y69
Troubleshooting
If you return the menu settings to the initial 
settings at the time of purchase, the 
condition may improve.
Select [RESET] in the [SETUP] menu. 
(P22)
∫Battery and power source
1: The camera cannot be operated even 
when it is turned on.
 Is the battery inserted correctly?
– Check the direction of the battery. 
(P14)
 Is the battery sufficiently charged?
– Use a battery that has been 
sufficiently charged.
2: The LCD monitor turns off while the 
camera is turned on....

Others
107VQT0Y69
7: The recorded picture looks rough. 
Noise appears on the picture.
 Is the ISO sensitivity high or the shutter 
speed slow?
(ISO sensitivity is set to [AUTO] when 
the camera is shipped. Therefore, when 
taking pictures indoors etc. the ISO 
sensitivity increases.)
– Decrease the ISO sensitivity. (P72)
– Set [PICT.ADJ.] to [NATURAL]. (P78)
– Take pictures in bright places.
 In [HIGH SENS.] (P55) in scene mode, 
the resolution of the recorded picture 
decreases slightly because of...

Others
108VQT0Y69
∫Flash
1: The flash is not activated.
 Is the flash setting set to Forced OFF 
[]?
– Change the flash setting. (P39)
 The flash is not activated when motion 
picture mode [ ], [SCENERY] (P50), 
[NIGHT SCENERY] (P51), 
[FIREWORKS] (P53), [STARRY SKY] 
(P54), [AERIAL PHOTO] 
(P55: DMC-FX07) or [HIGH SENS.] 
(P55: DMC-FX07) in scene mode is 
selected.
2: The flash is activated 2 times.
 When you select red-eye reduction 
(P40), the flash is activated once before 
the actual recording to...

Others
109VQT0Y69
∫TV, PC and printer
1: The picture does not appear on the 
television.
 Is the camera connected to the TV 
correctly?
 Set the TV input to external input mode.
2: The display areas on the TV screen 
and the camera’s LCD monitor are 
different.
Depending on the TV model, the area 
display may be smaller so the picture 
may be stretched horizontally or vertically 
and the top and bottom or left and right of 
the picture may be cut off when it is 
displayed. This is due to the TV...

Others
110VQT0Y69
∫Others
1: An unreadable language was selected 
by mistake.
 Press [MENU/SET], select the [SETUP] 
menu icon [ ] and then select the [ ] 
icon to set the desired language. (P23)
2: The setting for the auto review 
function is disabled.
 Are you taking pictures using auto 
bracket (P45)? Is the camera in burst 
mode (P47) or motion picture mode [ ] 
(P63) or [SELF PORTRAIT] (P52) ? 
Is [AUDIO REC.] set to [ON] (P75)?– In these cases, you cannot set the auto 
review function in the...