Panasonic Dmc Fs7 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Dmc Fs7 Operating Instructions Manual. The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 61
![Page 61
61VQT2C70
Advanced (Recording pictures)
Note•The ends of the recorded pictures may be cut at printing so check before printing. (P101)
For details on [REC] mode menu settings, refer to P20.
The camera automatically sets the optimum ISO sensitivity and shutter speed to suit the
movement of the subject and brightness of the scene to minimize the jitter of the subject.
Applicable modes:
·
[OFF]/[ ]/[ ]/[ ]
• The upper limit of the ISO sensitivity can be set.
• The higher the value set for the ISO...](http://img.usermanuals.tech/thumb/58/65804/w300_dmc-fs7_en_om_d-60.png "Page 61
61VQT2C70
Advanced (Recording pictures)
Note•The ends of the recorded pictures may be cut at printing so check before printing. (P101)
For details on [REC] mode menu settings, refer to P20.
The camera automatically sets the optimum ISO sensitivity and shutter speed to suit the
movement of the subject and brightness of the scene to minimize the jitter of the subject.
Applicable modes:
·
[OFF]/[ ]/[ ]/[ ]
• The upper limit of the ISO sensitivity can be set.
• The higher the value set for the ISO...")
61VQT2C70 Advanced (Recording pictures) Note•The ends of the recorded pictures may be cut at printing so check before printing. (P101) For details on [REC] mode menu settings, refer to P20. The camera automatically sets the optimum ISO sensitivity and shutter speed to suit the movement of the subject and brightness of the scene to minimize the jitter of the subject. Applicable modes: · [OFF]/[ ]/[ ]/[ ] • The upper limit of the ISO sensitivity can be set. • The higher the value set for the ISO...
Page 62
![Page 62
VQT2C7062
Advanced (Recording pictures)
Note• When setting to [AUTO], the ISO sensitivity is automatically adjusted to a maximum of [ISO400] according to the brightness. (It can be adjusted to a maximum of [ISO1000] when using the
flash.)
• The setting is not available when [INTELLIGENT ISO] is being used. ([ ] is displayed.)
• To avoid picture noise, we recommend that you either reduce the maximum ISO sensitivity level or set [COLOR MODE] to [NATURAL], and then take pictures. (P65)
For details on...](http://img.usermanuals.tech/thumb/58/65804/w300_dmc-fs7_en_om_d-61.png "Page 62
VQT2C7062
Advanced (Recording pictures)
Note• When setting to [AUTO], the ISO sensitivity is automatically adjusted to a maximum of [ISO400] according to the brightness. (It can be adjusted to a maximum of [ISO1000] when using the
flash.)
• The setting is not available when [INTELLIGENT ISO] is being used. ([ ] is displayed.)
• To avoid picture noise, we recommend that you either reduce the maximum ISO sensitivity level or set [COLOR MODE] to [NATURAL], and then take pictures. (P65)
For details on...")
VQT2C7062 Advanced (Recording pictures) Note• When setting to [AUTO], the ISO sensitivity is automatically adjusted to a maximum of [ISO400] according to the brightness. (It can be adjusted to a maximum of [ISO1000] when using the flash.) • The setting is not available when [INTELLIGENT ISO] is being used. ([ ] is displayed.) • To avoid picture noise, we recommend that you either reduce the maximum ISO sensitivity level or set [COLOR MODE] to [NATURAL], and then take pictures. (P65) For details on...
Page 63
![Page 63
63VQT2C70
Advanced (Recording pictures)
Setting the white balance manually 1Select [Ó] and then press [MENU/SET].
2Aim the camera at a sheet of white paper etc. so that the
frame in the center is filled by the white object only and then
press [MENU/SET].
Note
• The white balance setting is memorized even if the camera is turned off. (However, the white balance setting for a Scene mode returns to [AWB] when the Scene mode is changed.)
• In the Scene modes listed below, white balance is fixed to [AWB]....](http://img.usermanuals.tech/thumb/58/65804/w300_dmc-fs7_en_om_d-62.png "Page 63
63VQT2C70
Advanced (Recording pictures)
Setting the white balance manually 1Select [Ó] and then press [MENU/SET].
2Aim the camera at a sheet of white paper etc. so that the
frame in the center is filled by the white object only and then
press [MENU/SET].
Note
• The white balance setting is memorized even if the camera is turned off. (However, the white balance setting for a Scene mode returns to [AWB] when the Scene mode is changed.)
• In the Scene modes listed below, white balance is fixed to [AWB]....")
63VQT2C70 Advanced (Recording pictures) Setting the white balance manually 1Select [Ó] and then press [MENU/SET]. 2Aim the camera at a sheet of white paper etc. so that the frame in the center is filled by the white object only and then press [MENU/SET]. Note • The white balance setting is memorized even if the camera is turned off. (However, the white balance setting for a Scene mode returns to [AWB] when the Scene mode is changed.) • In the Scene modes listed below, white balance is fixed to [AWB]....
Page 64
![Page 64
VQT2C7064
Advanced (Recording pictures)
• Under certain picture-taking conditions including the following cases, the facial recognition function may fail to work, making it impossible to detect faces. [AF MODE] is switched to [ ].
– When the face is not facing the camera
– When the face is at an angle
– When the face is extremely bright or dark
– When there is little contrast on the faces
– When the facial features are hidden behind sunglasses, etc.
– When the face appears small on the screen
– When...](http://img.usermanuals.tech/thumb/58/65804/w300_dmc-fs7_en_om_d-63.png "Page 64
VQT2C7064
Advanced (Recording pictures)
• Under certain picture-taking conditions including the following cases, the facial recognition function may fail to work, making it impossible to detect faces. [AF MODE] is switched to [ ].
– When the face is not facing the camera
– When the face is at an angle
– When the face is extremely bright or dark
– When there is little contrast on the faces
– When the facial features are hidden behind sunglasses, etc.
– When the face appears small on the screen
– When...")
VQT2C7064 Advanced (Recording pictures) • Under certain picture-taking conditions including the following cases, the facial recognition function may fail to work, making it impossible to detect faces. [AF MODE] is switched to [ ]. – When the face is not facing the camera – When the face is at an angle – When the face is extremely bright or dark – When there is little contrast on the faces – When the facial features are hidden behind sunglasses, etc. – When the face appears small on the screen – When...
Page 65
![Page 65
65VQT2C70
Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P20.
This can enlarge subjects even more than the optical zoom or extended optical zoom.
Applicable modes:
·¿n
[OFF]/[ON]
Note
• Refer to P33 for details.
• If camera shake (jitter) is a problem during zooming, it is recommended that [STABILIZER] be set to [AUTO] or [MODE1].
• The setting is fixed to [ON] in Macro zoom mode.
For details on [REC] mode menu settings, refer to P20.
Using these modes, the pictures can...](http://img.usermanuals.tech/thumb/58/65804/w300_dmc-fs7_en_om_d-64.png "Page 65
65VQT2C70
Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P20.
This can enlarge subjects even more than the optical zoom or extended optical zoom.
Applicable modes:
·¿n
[OFF]/[ON]
Note
• Refer to P33 for details.
• If camera shake (jitter) is a problem during zooming, it is recommended that [STABILIZER] be set to [AUTO] or [MODE1].
• The setting is fixed to [ON] in Macro zoom mode.
For details on [REC] mode menu settings, refer to P20.
Using these modes, the pictures can...")
65VQT2C70 Advanced (Recording pictures) For details on [REC] mode menu settings, refer to P20. This can enlarge subjects even more than the optical zoom or extended optical zoom. Applicable modes: ·¿n [OFF]/[ON] Note • Refer to P33 for details. • If camera shake (jitter) is a problem during zooming, it is recommended that [STABILIZER] be set to [AUTO] or [MODE1]. • The setting is fixed to [ON] in Macro zoom mode. For details on [REC] mode menu settings, refer to P20. Using these modes, the pictures can...
Page 66
![Page 66
VQT2C7066
Advanced (Recording pictures)
Note• The Stabilizer function may not be effective in the following cases.– When there is a lot of jitter.
– When the zoom magnification is high.
– In digital zoom range.
– When taking pictures while following a moving subject.
– When the shutter speed becomes slower to take pictures indoors or in dark places.
Be careful of camera jitter when you press the shutter button.
• The setting is fixed to [MODE2] with [SELF PORTRAIT] in Scene mode and to [OFF] in
[STARRY...](http://img.usermanuals.tech/thumb/58/65804/w300_dmc-fs7_en_om_d-65.png "Page 66
VQT2C7066
Advanced (Recording pictures)
Note• The Stabilizer function may not be effective in the following cases.– When there is a lot of jitter.
– When the zoom magnification is high.
– In digital zoom range.
– When taking pictures while following a moving subject.
– When the shutter speed becomes slower to take pictures indoors or in dark places.
Be careful of camera jitter when you press the shutter button.
• The setting is fixed to [MODE2] with [SELF PORTRAIT] in Scene mode and to [OFF] in
[STARRY...")
VQT2C7066 Advanced (Recording pictures) Note• The Stabilizer function may not be effective in the following cases.– When there is a lot of jitter. – When the zoom magnification is high. – In digital zoom range. – When taking pictures while following a moving subject. – When the shutter speed becomes slower to take pictures indoors or in dark places. Be careful of camera jitter when you press the shutter button. • The setting is fixed to [MODE2] with [SELF PORTRAIT] in Scene mode and to [OFF] in [STARRY...
Page 67
![Page 67
67VQT2C70
Advanced (Playback)
[PLAYBACK] mode: ¸
Advanced (Playback)Playing Back Pictures in Sequence (Slide Show)
You can play back the pictures you have taken in synchronisation with music, and you can
do this in sequence while leaving a fixed interval between each of the pictures.
Furthermore, you can play back the pictures grouped together by category or play back
only those pictures you have set as favorites as a slide show.
This playback method is recommended when you have connected the camera...](http://img.usermanuals.tech/thumb/58/65804/w300_dmc-fs7_en_om_d-66.png "Page 67
67VQT2C70
Advanced (Playback)
[PLAYBACK] mode: ¸
Advanced (Playback)Playing Back Pictures in Sequence (Slide Show)
You can play back the pictures you have taken in synchronisation with music, and you can
do this in sequence while leaving a fixed interval between each of the pictures.
Furthermore, you can play back the pictures grouped together by category or play back
only those pictures you have set as favorites as a slide show.
This playback method is recommended when you have connected the camera...")
67VQT2C70 Advanced (Playback) [PLAYBACK] mode: ¸ Advanced (Playback)Playing Back Pictures in Sequence (Slide Show) You can play back the pictures you have taken in synchronisation with music, and you can do this in sequence while leaving a fixed interval between each of the pictures. Furthermore, you can play back the pictures grouped together by category or play back only those pictures you have set as favorites as a slide show. This playback method is recommended when you have connected the camera...
Page 68
![Page 68
VQT2C7068
Advanced (Playback)
∫Operations performed during slide showThe cursor displayed during playback is the same as 3/4/2/1 .• The menu screen is restored when [ ‚] is pressed.
∫ Changing the slide show settings
You can change the settings for slide show playback by selecting
[EFFECT] or [SETUP] on the slide show menu screen.
[EFFECT]
This allows you to select the screen effects or music effects when
switching from one picture to the next.
[NATURAL], [SLOW], [SWING], [URBAN], [OFF], [AUTO]
• When...](http://img.usermanuals.tech/thumb/58/65804/w300_dmc-fs7_en_om_d-67.png "Page 68
VQT2C7068
Advanced (Playback)
∫Operations performed during slide showThe cursor displayed during playback is the same as 3/4/2/1 .• The menu screen is restored when [ ‚] is pressed.
∫ Changing the slide show settings
You can change the settings for slide show playback by selecting
[EFFECT] or [SETUP] on the slide show menu screen.
[EFFECT]
This allows you to select the screen effects or music effects when
switching from one picture to the next.
[NATURAL], [SLOW], [SWING], [URBAN], [OFF], [AUTO]
• When...")
VQT2C7068 Advanced (Playback) ∫Operations performed during slide showThe cursor displayed during playback is the same as 3/4/2/1 .• The menu screen is restored when [ ‚] is pressed. ∫ Changing the slide show settings You can change the settings for slide show playback by selecting [EFFECT] or [SETUP] on the slide show menu screen. [EFFECT] This allows you to select the screen effects or music effects when switching from one picture to the next. [NATURAL], [SLOW], [SWING], [URBAN], [OFF], [AUTO] • When...
Page 69
![Page 69
69VQT2C70
Advanced (Playback)
[PLAYBACK] mode: ¸
Selecting Pictures and Playing them Back
([CATEGORY PLAY]/[FAVORITE PLAY])
This mode allows you to search images by Scene mode or other categories (such as
[PORTRAIT], [SCENERY] or [NIGHT SCENERY]) and sort the pictures into each of the
categories. You can then play back the pictures in each category.
Slide the [REC]/[PLAYBACK] selector switch to [ (], and then press
[MODE].
Press 3/4 to select [CATEGORY PLAY], and then press [MENU/SET].
Press 3/4/...](http://img.usermanuals.tech/thumb/58/65804/w300_dmc-fs7_en_om_d-68.png "Page 69
69VQT2C70
Advanced (Playback)
[PLAYBACK] mode: ¸
Selecting Pictures and Playing them Back
([CATEGORY PLAY]/[FAVORITE PLAY])
This mode allows you to search images by Scene mode or other categories (such as
[PORTRAIT], [SCENERY] or [NIGHT SCENERY]) and sort the pictures into each of the
categories. You can then play back the pictures in each category.
Slide the [REC]/[PLAYBACK] selector switch to [ (], and then press
[MODE].
Press 3/4 to select [CATEGORY PLAY], and then press [MENU/SET].
Press 3/4/...")
69VQT2C70 Advanced (Playback) [PLAYBACK] mode: ¸ Selecting Pictures and Playing them Back ([CATEGORY PLAY]/[FAVORITE PLAY]) This mode allows you to search images by Scene mode or other categories (such as [PORTRAIT], [SCENERY] or [NIGHT SCENERY]) and sort the pictures into each of the categories. You can then play back the pictures in each category. Slide the [REC]/[PLAYBACK] selector switch to [ (], and then press [MODE]. Press 3/4 to select [CATEGORY PLAY], and then press [MENU/SET]. Press 3/4/...
Page 70
![Page 70
VQT2C7070
Advanced (Playback)
You can play back the pictures you have set as [FAVORITE] (P77) (Only when
[FAVORITE] is set to [ON] and there are pictures which have been set to [FAVORITE]).
Slide the [REC]/[PLAYBACK] selector switch to [(], and then press
[MODE].
Press 3/ 4 to select [FAVORITE PLAY], and then press [MENU/SET].
Note• You can use only [ROTATE DISP.], [PRINT SET] or [PROTECT] in the [PLAYBACK] menu.
[PLAYBACK] mode: ¸
Playing Back Motion Pictures
Press 2/1 to select a picture with a...](http://img.usermanuals.tech/thumb/58/65804/w300_dmc-fs7_en_om_d-69.png "Page 70
VQT2C7070
Advanced (Playback)
You can play back the pictures you have set as [FAVORITE] (P77) (Only when
[FAVORITE] is set to [ON] and there are pictures which have been set to [FAVORITE]).
Slide the [REC]/[PLAYBACK] selector switch to [(], and then press
[MODE].
Press 3/ 4 to select [FAVORITE PLAY], and then press [MENU/SET].
Note• You can use only [ROTATE DISP.], [PRINT SET] or [PROTECT] in the [PLAYBACK] menu.
[PLAYBACK] mode: ¸
Playing Back Motion Pictures
Press 2/1 to select a picture with a...")
VQT2C7070 Advanced (Playback) You can play back the pictures you have set as [FAVORITE] (P77) (Only when [FAVORITE] is set to [ON] and there are pictures which have been set to [FAVORITE]). Slide the [REC]/[PLAYBACK] selector switch to [(], and then press [MODE]. Press 3/ 4 to select [FAVORITE PLAY], and then press [MENU/SET]. Note• You can use only [ROTATE DISP.], [PRINT SET] or [PROTECT] in the [PLAYBACK] menu. [PLAYBACK] mode: ¸ Playing Back Motion Pictures Press 2/1 to select a picture with a...