Panasonic Dmc Fs42 Operating Instructions Manual

Advanced-Viewing
- 1 -

Changing the slide show settingsYou can change the settings for slide show playback by selecting [EFFECT] or [SETUP] on the slide show menu screen.
[EFFECT]This allows you to select the screen effects or music effects when switching from one picture to the next picture.[NATURAL], [SLOW], [SWING], [URBAN], [OFF]
•  When [URBAN] has been selected, the picture may appear in black and white as a 
screen effect.
[SETUP][DURATION] or [REPEAT] can be set.
ItemSettings...

Advanced-Viewing
-  -

Selecting Pictures and Playing Them Back
Playback Mode: z
z [FAVORITE PLAY]
You can play back the pictures put in the favorites list only. (When [FAVORITE] is set to [ON] and there is more than one picture in the favorites list.)Refer to [FAVORITE] (P91) to put a picture on your favorites list or to remove it from the list.
1 Slide the recording/playback switch to [5] and then press [MODE].
2 Press e/r to select [FAVORITE PLAY] and then press [MENU/SET].
 Note
•  You can...

Advanced-Viewing
-  -

Playing Back Motion Pictures
Playback Mode: 9 z
CBAPress w/q to select a picture with a motion picture 
icon (such as [-]), and then press e to play back.
A  
The motion picture recording timeB  
Motion picture iconC  
Motion picture playback icon
•  After playback starts, the elapsed playback time is displayed on 
the upper right of the screen. For example, 8 minutes and 30 seconds is displayed as [8m30s].
Operations performed during motion picture playback
The cursor...

Advanced-Viewing
-  -

Using the [PLAYBACK] Menu
Playback Mode: 9
You can use various functions in Playback Mode to rotate pictures, set protection for them etc.
•  With [TEXT STAMP] or [RESIZE], a new edited picture is created. A new picture cannot 
be created if there is no free space on the built-in memory or the card so we recommend checking that there is free space and then editing the picture.
t [CALENDAR]
You can display pictures by recording date.
1 Select [CALENDAR] on the [PLAYBACK]...

Advanced-Viewing
-  -

y [TITLE EDIT]
You can add text (comments) to pictures. After text has been registered, it can be included in prints using [TEXT STAMP] (P87). (Only alphabetical characters and symbols can be entered.)
1 Select [TITLE EDIT] on the [PLAYBACK] menu. (P21)
2 Press e/r to select [SINGLE] or [MULTI] and then press [MENU/SET].
[SINGLE][MULTI]
Press w/q to select the picture.Press e/r/w/q to select the pictures.
3 Select the picture, and then press [MENU/SET] to set.
•  [u] is...

Advanced-Viewing
-  -

Delete the title[SINGLE] setting
1  In step 4, delete all the texts, select [EXIT], and press [MENU/SET].
2  Press [4].
3  Press [MENU/SET] to close the menu.
[MULTI] setting
1  In step 4, delete all the texts, select [EXIT], and press [MENU/SET].
2 Press [MENU/SET] to close the menu.
  Note
•  Text can be scrolled if all of the registered text does not fit on the screen.
•  The name setting of [BABY1]/[BABY2] or [PET] in Scene Mode or [TRAVEL DATE] 
location setting can...

Advanced-Viewing
-  -

s [TEXT STAMP]
You can stamp the recording date/time, age, travel date or title onto the recorded pictures. It is suitable for regular size printing. (Pictures larger than 3M will be resized when stamping the date etc. on them.)
1 Select [TEXT STAMP] on the [PLAYBACK] menu. (P21)
2 Press e/r to select [SINGLE] or [MULTI] and press [MENU/SET].
[SINGLE][MULTI]
Press w/q to select the picture.Press e/r/w/q to select the pictures.
A
3 Select the picture, and then press...

Advanced-Viewing
-  -

5 Press [MENU/SET].
•  If you set [TEXT STAMP] for a picture larger than 3M, the picture size will become smaller as shown below
DMC-FS42: E/T " C DMC-FS4: R/T " C 
Y " MZ " M
K " UX " U
•  The picture becomes slightly rougher.
(Example)
6 Press e to select [YES] and press [MENU/SET].
•  The message [SAVE NEW PICTURES?] appears if the picture was recorded with a picture size of 3M or less.
7 Press [4] to return to the menu screen. The menu...

Advanced-Viewing
-  -

f [RESIZE] Reducing the picture size (number of pixels)
This function is useful if you want to reduce the file size of the picture in cases when it needs to be attached to an e-mail or uploaded to a website.
1 Select [RESIZE] on the [PLAYBACK] menu. (P21)
2 Press e/r to select [SINGLE] or [MULTI] and then press [MENU/SET].
3 Select the picture(s) and size(s).
[SINGLE][SINGLE] setting
1  Press w/q to select the picture, and then press [MENU/SET].
2  Press w/q to select...

Advanced-Viewing
- 0 -

j [ROTATE]
This mode allows you to rotate pictures manually in 90° increments.
1 Select [ROTATE] on the [PLAYBACK] menu. (P21)
2 Press w/q to select the picture and then press [MENU/SET] .
• Motion pictures and protected pictures cannot be rotated.
3 Press e/r to select the direction to rotate the picture and then press [MENU/SET].
,The picture rotates clockwise in increments of 90°.
.The picture rotates counter-clockwise in increments of 90°.
4 Press [4] to return to the...