Panasonic Dmc Fp8 Operating Instructions Manual

- 41 -
Basic
•When using the zoom function, an estimate of the focus range will appear in conjunction 
with the zoom display bar. (Example: 0.3 m (0.99 feet) –¶)
¢ The magnification level differs depending on [PICTURE SIZE] and [ASPECT RATIO] setting.
∫Extended optical zoom mechanism
When you set the picture size to [ ] (3 million pixels), the 12M (12.1 million pixels) CCD 
area is cropped to the center 3M (3 million pixels) area, allowing a picture with a higher 
zoom effect.
Note
•
The digital zoom...

Basic
- 42 -
[PLAYBACK] Mode: ¸
Playing back Pictures ([NORMAL PLAY])
•Speed of picture forwarding/rewinding changes depending on the playback status.
∫Fast forwarding/Fast rewinding
Press and hold  2/1 during playback.
•
The file number  A and the picture number  B only 
change one by one. Release  2/1 when the number of 
the desired picture appears to play back the picture.
•If you keep pressing  2/1, the number of pictures forwarded/rewound increases.
Slide the [REC]/[PLAYBACK] selector 
switch  A to...

- 43 -
Basic
Rotate the zoom lever towards [L] (W).
1screen >12 screens >30 screens >Calendar screen 
display  (P112)
ANumber of the selected picture and the total number of 
recorded pictures
•Rotate the zoom lever towards [Z ] (T) to return to the 
previous screen.
•Pictures are not rotated for display.•Pictures displayed using [ ] cannot be played back.
∫ To return to normal playback1Press  3/4/ 2/1 to select a picture.
•An icon will be displayed depending on the recorded picture and the...

Basic
- 44 -
Note
•This camera complies with the DCF standard “Design rule for Camera File system” established 
by JEITA “Japan Electronics and Information Technology Industries Association” and with Exif 
“Exchangeable Image File Format”. Files which do not comply with the DCF standard cannot 
be played back.
•If you want to save the enlarged picture, use the Trimming function.  (P118)•The Playback Zoom may not operate if pictures have been recorded with other equipment.•Playback Zoom cannot be used...

- 45 -
Basic
[PLAYBACK] Mode: ¸
Deleting Pictures
Once deleted, pictures cannot be recovered.
•Pictures on the built-in memory or the card, that are being played back will be deleted.
To delete a single picture
Select the picture to be deleted, and then 
press [ ‚].
A [DISPLAY] button
B [‚] button
Press  2 to select [YES] and then press 
[MENU/SET].
To delete multiple pictures (up to 50) or all the pictures
Press [ ‚].
Press  3/4  to select [DELETE MULTI] or [DELETE ALL] and then 
press [MENU/SET]....

Basic
- 46 -
∫When [DELETE ALL] has been selected with the [FAVORITE]  (P121) setting
The selection screen is displayed again. Select [DELETE ALL] or 
[ ALL DELETE EXCEPT Ü], press  3 to select [YES] and delete the pictures. 
([ALL DELETE EXCEPT Ü] cannot be selected if no pictures have been set as 
[FAVORITE].)
Note
•
Do not turn the camera off while deleting (while [ ‚] is displayed). Use a battery with a sufficient 
power or the AC adaptor (optional).
•If you press [MENU/SET] while deleting pictures...

- 47 -
Advanced (Recording pictures)
Advanced (Recording pictur es)About the LCD Monitor
Press [DISPLAY] to change.
ALCD monitor
B [DISPLAY] button
•When the menu screen appears, the [DISPLAY] button is not 
activated. During Playback Zoom  (P44), while playing back motion 
pictures  (P110) and during a slide show  (P105), you can only select 
“Normal display  F” or “No display  H”.
In Recording Mode
In Playback Mode
¢1 If the [HISTOGRAM] in [SETUP] menu is set to [ON], histogram will be displayed.
¢ 2...

Advanced (Recording pictures)
- 48 -
∫Recording guideline
When you align the subject on the horizontal 
and vertical guidelines or the cross point of 
these lines, you can take pictures with 
well-designed composition by viewing the size, 
the slope and the balance of the subject.
∫ About the Histogram
A histogram is a graph that displays brightness along the horizontal axis (black to white) 
and the number of pixels at each brightness level on the vertical axis.
It allows you to easily check a picture’s...

- 49 -
Advanced (Recording pictures)
[REC] mode: ñ· ¿
Taking Pictures using the Built-in Flash
Set the flash to match the recording.
Press 1 [‰ ].
Press  3/4  to select a mode.
•You can also press  1 [‰] to select.•For information about flash settings that can be selected, refer to “Available flash settings by Recording Mode”. (P51)
Press [MENU/SET].
•You can also press the shutter button halfway to finish.•The menu screen disappears after about 5 seconds. At this time, the selected item is...

Advanced (Recording pictures)
- 50 -
¢The flash is activated twice. The subject should not move until the second flash is 
activated. Interval until the second flash depends on the brightness of the subject.
[RED-EYE REMOVAL]  (P104) on the [REC] Mode menu is set to [ON], [ ] appears on 
the flash icon.
ItemDescription of settings
‡ : AUTO The flash is automatically activated when the recording conditions make 
it necessary.
ˆ :
AUTO/Red-eye 
reduction
¢
The flash is automatically activated when the...