Panasonic Dmc Fp5 Owners Manual

							Advanced (Playback)
- 101 -
[Print Set]
DPOF “Digital Print Order Format” is a system that allows the user to select which 
pictures to print, how many copies of each picture to print and whether or not to print the 
recording date on the pictures when using a DPOF compatible photo printer or photo 
printing store.
For details, ask at your photo printing store.
When you want to use a photo printing store to print pictures recorded on the built-in 
memory, copy them to a card (P104) and then set the print setting.
For more information visit:
http://panasonic.jp/dc/dpof_110/white_e.htm
 Select [Print Set] on the [Playback] Mode menu. (P39)
 Touch [S (Single)] or [M (Multi)].
[Single][Multi] Select the picture.[Single] setting
Drag the screen horizontally 
to select an image, and then 
touch [Set].
•
 
F
 or how to select a picture, 
see P31.
[Multi] setting
Touch the picture you wish to print.
•
 
F
 or how to select a picture, see P31.
 Touch [e] / [r] to set the number of prints, and touch [Set].• When [Multi] has been selected, repeat steps  3 and 4 for each picture. (It is not 
possible to use the same setting for a multiple number of pictures.)
•
 
After setting, close the men
 u.
„„ Canceling all the [Print Set] settings
Select [Print Set] 
"  [CANCEL]  "  [Yes] on the playback menu. 
						

							Advanced (Playback)
- 102 -
„„To print the date
After setting the number of prints, set/cancel printing with the recording date by touching 
[Date].
•
 
Depending on the photo pr
 inting store or the printer, the date may not be printed even if 
you set to print the date. For further information, ask at your photo printing store or refer 
to the operating instructions for the printer.
•
 
The date cannot be pr
 inted on pictures stamped with text or date.
 Note
•
 
The n
 umber of prints can be set from 0 to 999.
•
 
With a pr
 inter supporting PictBridge, the date print settings of the printer may take 
precedence.
•
 
It ma
 y not be possible to use the print settings with other equipment. In this case, cancel 
all the settings, and reset the settings.
•
 
The pr
 int setting cannot be set for motion pictures.
•
 
If the file is not based on the DCF standard, the pr
 int setting cannot be set. 
						

							Advanced (Playback)
- 103 -
[Protect]
You can set protection for pictures you do not want to delete by mistake.
 Select [Protect] on the [Playback] Mode menu. (P39)
 Touch [S (Single)] or [M (Multi)].
 Select the picture .[Single][Single] setting
Drag the screen horizontally to select an image, 
and then touch [Set].
•
 
F
 or how to select a picture, see P31.
•
 
Setting is canceled b
 y touching [Cancel].
[Multi][Multi] setting
Touch the picture you wish to protect.
• 
F
 or how to select a picture, see P31.
•
 
Setting is canceled b
 y touching the same picture 
again.
•
 
After setting, close the men
 u.
„„ Canceling all the [Protect] settings
Select [Protect] 
"  [CANCEL]  "  [Yes] on the playback menu.
 Note
•
 
The protect setting ma
 y not be effective on other equipment.
•
 
Ev
 en if you protect pictures in the built-in memory or a card, they will be deleted if the 
built-in memory or the card is formatted.
•
 
Ev
 en if you do not protect pictures on a card, they cannot be deleted when the card’s 
Write-Protect switch is set to [LOCK]. 
						

							Advanced (Playback)
- 104 -
[Copy] Copying pictures from the built-in memory to a card
You can copy the data of the pictures you have taken from the built-in memory to a card 
or from a card to the built-in memory.
 Select [Copy] on the [Playback] Mode menu. (P39)
 Touch the copy destination.
N: All the picture data in the b uilt-in memory are copied onto the card at one 
time. " step 4.
M:
 One picture at a time is copied from the card to the b

uilt-in memory. " step 
3.
 Drag the screen horizontally to select an image, and then touch  [Set].
• For how to select a picture, see P31.
 Touch [Yes].• Do not tur n the camera off at any point during the copying process.
•  After cop ying, close the menu.
 Note
•
 
If a picture e
 xists with the same name (folder number / file number) as the picture to be 
copied in the copy destination when [N] is selected, a new folder is created and the 
picture is copied.
•
 
If a picture e
 xists with the same name (folder number / file number) as the picture to be 
copied in the copy destination when [M] is selected, that picture is not copied.
•
 
It ma
 y take time to copy the picture data.
•
 
Only pictures recorded with a P
 anasonic digital camera (LUMIX) will be copied.  
(Even if the pictures were recorded with a Panasonic digital camera, you may not be 
able to copy them if they were edited with a PC.)
•
 
[Pr
 int Set], [Protect] or [Favorite] settings will not be copied. Perform the settings again 
after copying is finished. 
						

							Connecting to other equipment
- 105 -
Playing back pictures using the AV cable (supplied)
Preparations:  Set the [Output]. (P44)
Turn this unit and the TV off.
1	 Yellow: To the video input socket
2	 White: To the audio input socket
A	 Align the marks, and insert straight. (Cannot insert in the opposite direction.)
B	 AV cable (supplied)
•
 
Chec
 k the directions of the connectors, and plug them straight in or unplug them straight 
out. (Otherwise the connectors may be bent out of shape which may cause malfunction.)
 Connect the camera to the  TV using the AV cable.
 Turn the TV on and select external input.
 Turn the camera on and touch [9].
Playing Back Pictures on a TV Screen
[Playback] Mode: 5 
						

							Connecting to other equipment
- 106 -
 Note
•
 
Depending on the aspect r
 atio, black bands may be displayed on the top and bottom or 
the left and right of the pictures.
•
 
Do not use an
 y other AV cables except the supplied one.
•
 
Read the oper
 ating instructions for the TV.
•
 
When y
 ou play back a picture vertically, it may be blurry.
•
 
Y

ou can view pictures on TVs in other countries (regions) which use the NTSC or PAL 
system when you set [Video Out] in the [Setup] menu. (PAL video out is not available 
on the version DMC-FP7P / DMC-FP5P sold in the U.S. and the version DMC-FP7PC / 
DMC-FP5PC sold in Canada.)
•
 
Y

ou cannot operate if you touch the Touch icon displayed on the TV screen.
•
 
Change the screen mode on y
 our TV if the picture is displayed with the top or bottom 
cut off.
Playing back pictures on a TV with an SD Memory Card slot
Playing back recorded pictures by inserting the card into the SD card slot.
 Note
•
 
Depending on the 
 TV model, pictures may not be displayed on the full screen.
•
 
T

o play back motion pictures, connect the camera to the TV with the AV cable.
•
 
Y

ou cannot play back pictures on SDHC cards or SDXC cards if the TV does not 
support these cards. 
						

							Connecting to other equipment
- 107 -
You can acquire recorded pictures to a PC by connecting the camera and the PC.
• Some PCs can read directly from the card remo ved from the camera. For details, refer 
to the operating instructions of the PC.
•
 
Y
 ou can easily print out or e-mail the pictures you have imported. Use of the 
“PHOTOfunSTUDIO” bundled software on the CD-ROM (supplied) is a convenient way 
of doing this.
•
 
Read the separ
 ate operating instructions for the supplied software for more information 
about the software in the CD-ROM (supplied) and how to install it.
Preparations: 
 T

urn on the camera and the PC. 
Remove the card before using the pictures in the built-in memory.
A	 USB connection cable (supplied)
•  Chec k the directions of the connectors, and plug them straight in or unplug them 
straight out. (Otherwise the connectors may be bent out of shape which will cause a 
malfunction.)
B	 Align the marks, and insert. (Cannot insert in the opposite direction.)
•
 
Use a batter
 y with sufficient battery power or the AC adaptor (optional) and DC coupler 
(optional). If the remaining battery power becomes low while the camera and the PC are 
communicating, the alarm beeps. 
Refer to “Disconnecting the USB connection cable safely”  (P108) before disconnecting the 
USB connection cable.
Connecting to a PC 
						

							Connecting to other equipment
- 108 -
 Connect the camera to the PC using the USB connection cable A.• Do not use any other USB connection cables except the supplied one.  
Use of cables other than the supplied USB connection cable may cause a 
malfunction.
 Touch [PC].• When the camer a has been connected to the PC with 
[USB Mode] set to [PictBridge(PTP)], a message may 
appear on the PC’s screen. Select [Cancel] to close the 
screen, and disconnect the camera from the PC. Then 
set [USB Mode] to [PC] again.
 Double-click on [Removable Disk] in [My Computer].• When using a Macintosh, the dr ive is displayed on the desktop. (“LUMIX”, 
“NO_NAME” or “Untitled” is displayed.)
 Double-click [DCIM] folder.
 Using a dra g-and-drop operation, move the pictures you want to 
acquire or the folder storing those pictures to any different folder on 
the PC.
„„ Disconnecting the USB connection cable safely
•
 Proceed with the hardw are removal using “Safely Remove Hardware” on the task tray 
of the PC. If the icon is not displayed, check that [Access] is not displayed on the LCD 
monitor of the digital camera before removing the hardware.
 Note
•
 
T

urn the camera off before connecting or disconnecting the AC adaptor (optional).
•
 
Bef
 ore inserting or removing a card, turn the camera off and disconnect the USB 
connection cable. Otherwise, data may be destroyed. 
						

							Connecting to other equipment
- 109 -
„„Viewing the contents of the built-in memory or card using the PC (folder 
composition)
1	Folder number
2	 File number
3	 JPG:
 Pictures MO

V:
 Motion Pictures
MISC:

   
DPOF pr
 int  
Favorite
AD
 
_LUMIX:
  For Upload Set 
LUMIXUP.EXE: 
 
Upload Set tool
  
(LUMIX Image Uploader)
• Built-in 
memor y
•
 
Card
A ne

w folder is created when pictures are taken in the following situations:
•
 
When a card containing a f
 older with the same folder number has been inserted (such 
as when pictures were taken using another maker of camera)
•
 
When there is a picture with file n
 umber 999 inside the folder
„„ Connection in the PTP Mode (Windows
® XP, Windows Vista®, Windows® 7 and 
Mac OS X only)
Set [USB Mode] to [PictBridge(PTP)].
Data can now be read only from the card into the PC.
•
 
When there are 1000 or more pictures on a card, the pictures ma

y not be imported in 
the PTP Mode. 
						

							Connecting to other equipment
- 110 -
Uploading pictures to the image sharing sites
Using the upload tool (LUMIX Image Uploader), you can upload pictures or motion 
pictures to the image sharing sites (Facebook, YouTube).
You do not need to import pictures to the computer or to install software. Only with 
the computer that can be connected to the Internet, you can upload pictures. This is 
convenient when immediately publicizing pictures taken while traveling.
• 
Set pictures to upload with [Upload Set] 
 (P95) beforehand.
Compliant OS: Windows
® XP, Windows Vista®, Windows® 7
Preparation: • 
 Connect the camer
a to the computer (P107). Or remove the card from the 
camera and insert it to the computer.
 • 

 
Create 

your account on the image sharing sites and confirm the user name, 
password and so on to log-in.
 Double-click [LUMIXUP.EXE] to start. (P109)• If the “PHOTOfunSTUDIO” software in the CD-ROM (supplied) has been installed,  the upload tool (LUMIX Image Uploader) may start automatically.
•
 
Read the oper
 ating instructions for LUMIX Image Uploader with using Internet 
Explorer.
 Select the upload destination and enter necessar y information.• Enter the user name and password, etc. on the log-in screen for each image 
sharing site.
•
 
Enter the comment, k
 eyword, etc. as necessary and click “Set”. Then, the images 
set for [Upload Set] on this camera will be uploaded on the image sharing site.
 Note
•
 
Oper
 ations will not be guaranteed in the future when the service contents of YouTube 
and Facebook change or the specifications change. Usable service contents or screens 
may change without notice. (This service is as of December 1, 2010.)
•
 
Do not upload images protected b
 y copyright unless you own the copyright or have 
obtained the approval from a relevant authority.