Panasonic Dmc Fp5 Basic Owners Manual

							11(ENG) VQT3F03
This touch panel is a type that detects pressure.
You can operate the camera by directly touching the icons or images 
on the LCD monitor (Touch Panel) with your fi nger or the supplied 
stylus pen.
Touch
To touch and release the touch 
panel. Drag
A movement without releasing the 
touch panel.
Use this to select icons or 
images, or to set the items.
•  It may not operate properly 
when multiple icons are touched 
simultaneously, so try to touch 
the center of the icon. Use this to see the next/previous 
image by dragging horizontally or 
change the range of the displayed 
image.
This can also be used to switch 
the page by operating the slide 
bar.
 How to Use the Touch Panel
725@%.$1@11@&/JOEE


 725@%.$1@11@&/JOEE










 
						

							12VQT3F03 (ENG)
  Note
•  If you use a commercially available liquid 
crystal protection sheet, please follow the 
instructions that accompany the sheet. 
(Depending on the material, visibility or 
operability may be impaired.)
•  Apply a little extra pressure when 
touching if you have a commercially 
available protection sheet affi  xed or if you feel it is not responding 
well.
•  Touch panel will not operate properly when the hand holding this unit  is pressing on the touch panel.
•  Do not press using anything with a sharp tip or anything hard, except  for the supplied stylus pen.
•  Do not operate with your fi  ngernails.
•  Wipe the LCD monitor with dry soft cloth when it gets dirty with fi  nger 
prints and others.
•  Do not scratch or press the LCD monitor too hard.
 

						

							13(ENG) VQT3F03
Charging the Battery
 

						

							14VQT3F03 (ENG)
  Connect the charger to the electrical outlet.
•  Charging starts when the [CHARGE]  indicator A lights green.
 

						

							15(ENG) VQT3F03
 

						

							16VQT3F03 (ENG)
About the Built-in Memory / the Card
Built-in Memory
•  Memory size: Approx. 70 MB
•  The built-in memory can be used as a temporary storage device  when the card being used becomes full.
•  The access time for the built-in memory may be longer than the  access time for a card.
Card
The following cards which conform to the SD video standard can be 
used with this unit.
(These cards are indicated as card in the text.)
Type of card which can  be used with this unitRemarks
SD Memory Card
(8 MB to 2 GB)
•  SDHC Memory Card can be used with  SDHC Memory Card or SDXC Memory 
Card compatible equipment.
•  SDXC Memory Card can only be used with  SDXC Memory Card compatible equipment.
•  Check that the PC and other equipment are  compatible when using the SDXC Memory Cards.
http://panasonic.net/avc/sdcard/
information/SDXC.html
SDHC Memory Card
(4 GB to 32 GB)
SDXC Memory Card
(48 GB, 64 GB)
•  Cards other than the cards with the above capacity cannot be used.
•  Use a card with SD Speed Class

						

							17(ENG) VQT3F03
•  Check that this unit is turned off.
•  We recommend using a Panasonic card.
   Slide the release lever in the direction of the [OPEN] and 
open the card / battery door.
•  Always use genuine Panasonic  batteries (NCA-YN101G; supplied 
or DMW-BCK7PP; optional).
•  If you use other batteries, we cannot guarantee the quality  of this product.
  Completely insert battery 
and card.
Battery:   Check the direction 
is correct and insert 
it securely to the 
end until the clicking 
sound is heard. Then, 
confi rm the battery is 
locked by the lever A.
Card:   Check the direction is 
correct and insert it 
fully until it clicks.
B:   Do not touch the terminals!
Face this side to the LCD side.
 
						

							18VQT3F03 (ENG)
Setting Date / Time (Clock Set)
•  The clock is not set when the camera is shipped.
   Open the lens cover.•  The camera is turned on.
  Touch [Clock Set].
  Touch the items you wish to set (Year / Month / Day / Hours / Minutes), and set using [e] / [r].
 Touch [Set].
 Touch [Set].
 Changing the clock setting
Select [Clock Set] in the [Rec] or [Setup] menu.
•  It can be changed in steps 3 and 4 to set the clock.
725@%.$1@11@&/JOEE


 725@%.$1@11@&/JOEE


 






 
						

							19(ENG) VQT3F03
Setting the Menu
Using the menu, you can select your preferred recording or playback 
functions, or can make basic settings for the camera.
This section describes the operation method using the example of how to 
set the [AF Mode] in the recording menu to [3] (Face Detection).
 Touch [MENU].
  Touch the type of menu.•  In Playback Mode, the playback menu can be selected instead of the recording 
menu.
  Touch the icon in the menu item.•  Touching the icon for a few seconds will display the explanation.
•  If there are many selectable items, [w]  and [q] are displayed at both ends. 
Touch and display other items. 
 Touch the setting.•  Touching the icon for a few seconds will display the explanation.
•  If there are many selectable items, [w]  and [q] are displayed at both ends. 
Touch and display other settings.
•  Depending on the item, some settings may not be displayed or  they may be displayed in a different way.
 

						

							20VQT3F03 (ENG)
Recording Sequence
  Open the lens cover.The camera is turned on in Recording 
Mode. (Recording is possible with this 
setting.)
A Shutter button
   Select Recording Mode.1Touch [
w1].
2 Touch the mode icon.
•  The description is displayed after the fi  rst touch. 
•  When operating from Playback Mode, touch [1] fi  rst to switch 
to Recording Mode, and then perform 1.