Panasonic Dmc Fh6 Owners Manual

- 31 -
 
Deleting pictures
 
●Do not turn off the power during deletion. 
●Use a sufficiently charged battery. 
●Pictures cannot be deleted in the following cases:
 • Protected pictures 
 • Card switch is in “LOCK” position.
 • Pictures not of DCF standard (→26)
Press to delete displayed picture
 • A confirmation screen is displayed. Select [Yes] with cursor button and then press [MENU/SET]. 
Pictures will be deleted from the card if the card is inserted, or from \
the built-in memory if 
the card is not...

- 32 -
Deleting pictures
To delete multiple (up to 50)/To delete all pictures
Press to delete displayed picture
Select [Delete Multi]/[Delete All]
 
●[Delete Multi]   Use cursor button to select picture and press 
[MENU/SET].
 • To cancel → Press [MENU/SET] again.
   Use cursor button to select [OK] and press 
[MENU/SET].
 Picture selected
 • You can select [All Delete Except Favorite] in 
[Delete All] if there are pictures that have been 
set as [Favorite] (→74).
 • A confirmation screen is displayed....

- 33 -
 
Setting the menu
Refer to the procedure below for an example on how to operate the menus.\
Example:  Changing [AF Mode] in the [Rec] menu in [Normal Picture] Mode
Press [MENU/SET]
The menu selection screen is displayed.
Select [Rec] menu and press [MENU/SET]
Press   to select [AF Mode] and press [MENU/SET]
Pages
The pages can also be selected with the zoom lever or the 
zoom button.
Press   to select a setting, and then press [MENU/SET]
The selected setting is set. • To cancel → Press [ / ]...

- 34 -
Setting the menu
 
●The operation screen examples in this manual may differ from the actual screen display 
or some parts of the screen display are omitted.
 
●The menu types and items that are displayed vary according to the mode. 
●The setting methods vary depending on the menu item. 
●In recording mode, the menu screen can also be exited by pressing the sh\
utter button 
halfway.
Menu type
[Rec] menu (In recording mode only)
Changing picture preferences (→55)  • Enables you to set the coloring,...

- 35 -
 
Using the [Setup] menu
ItemSettings, notes
 [Clock Set]
(→16) Set time, date, and display format.
 [World Time]
Set the local time at 
travel destination. Message will be displayed when setting for the first time. In 
this case, press [MENU/SET] and skip to step .
  
Use cursor button to select [Home] or [Destination] and 
press [MENU/SET]
  Use cursor button to select area and press 
[MENU/SET]
Difference with 
home time
Current time at 
selected destination
City/area name
When [Destination]...

- 36 -
Using the [Setup] menu
ItemSettings, notes
DMC-FH6
[Beep]
Change or mute the 
beep/shutter sounds. [Beep Level] /  /  : Low / High / Mute
[Beep Tone]
 /  /  : Change beep tone.
[Shutter Vol.]
 /  /  : Low / High / Mute
[Shutter Tone]
 /  /  : Change shutter tone.
DMC-FH4 DMC-S5 DMC-S2
[Beep]
Adjust volume of beep 
sounds.
 /  /  : Low / High / Mute
 [Volume]
Adjust volume of sound 
from speakers (7 levels). [0] / [1] / [2] / [3] / [4] / [5] / [6]
 • Cannot be used to adjust TV speaker volume when...

- 37 -
Using the [Setup] menu
ItemSettings, notes
[Focus Icon]
Change the focus icon. /  /  /  /  / 
 [Auto Power Off]
Turn off the power when 
you are not using the 
camera to minimize 
battery consumption. [2 MIN.] / [5 MIN.] / [10 MIN.] / [OFF]
 • To restore → Press the Power button
 • Cannot be used in the following cases:When connected to computer/printer, during motion 
picture recording/playback, during Slide Shows, during 
automatic demo playback 
 • Settings fixed to [5 MIN.] in [Intelligent...

- 38 -
Using the [Setup] menu
ItemSettings, notes
 [Output]
Adjust the settings used 
when the camera is 
connected to a TV, etc. 
via the AV cable. 
(Playback mode only.) [Video Out]  
(DMC-FH6PU/DMC-FH4PU/DMC-S5PU/DMC-S2PU/
DMC-FH6PR/DMC-FH4PR/DMC-S5PR only)
[NTSC] / [PAL]
[TV Aspect]
 / 
[Rotate Disp.]
Automatically rotate 
portrait still pictures.:   Rotate and display pictures displayed on a TV 
screen as well as those displayed on the LCD 
monitor of the camera in portrait orientation.
:...

- 39 -
Using the [Setup] menu
ItemSettings, notes
 [Format]
Use when [Built-In 
Memory Error] or 
[Memory Card Error] 
appears, or when 
formatting the built-in 
memory or card. 
When a card/built-in 
memory is formatted, 
the data cannot be 
restored. Check the 
content of the card/
built-in memory 
carefully before 
formatting.  • This requires a sufficiently charged battery. When 
formatting the built-in memory, remove the cards.
(Only inserted card will be formatted if present; built-in 
memory will...

- 40 -
 
Taking pictures with your own settings  
[Normal Picture] Mode
Recording mode:    
 
● If a warning is displayed about jitter, use [Stabilizer], a 
tripod, or [Selftimer].
 
●If aperture and shutter speed are shown in red, you do 
not have appropriate exposure. Either use the flash or 
change the “ISO Sensitivity” settings. Jitter alert 
display
  Aperture value Shutter speed
Using the [Rec] menu to change settings and set up your own recording en\
vironment.
 
■Changing recording information...