Panasonic Dmc Fh6 Owners Manual
Here you can view all the pages of manual Panasonic Dmc Fh6 Owners Manual. The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 91
![Page 91
- 91 -
Message displays
[Memory Card Error] [Memory card parameter error]
●Card is not of SD standard.
●When cards in capacities of 4 GB or more are used, only SDHC or SDXC Mem\
ory Cards are
supported.
[Read Error]/[Write Error] [Please check the card]
●Data read has failed.
→ Check whether card has been inserted correctly ( →12).
●Data write has failed.
→ Turn off power and remove card, before re-inserting and turning on power again.\
●Card may possibly be damaged.
●Try with a...](http://img.usermanuals.tech/thumb/58/65783/w300_dmc-fh6_en_adv_om_d-90.png "Page 91
- 91 -
Message displays
[Memory Card Error] [Memory card parameter error]
●Card is not of SD standard.
●When cards in capacities of 4 GB or more are used, only SDHC or SDXC Mem\
ory Cards are
supported.
[Read Error]/[Write Error] [Please check the card]
●Data read has failed.
→ Check whether card has been inserted correctly ( →12).
●Data write has failed.
→ Turn off power and remove card, before re-inserting and turning on power again.\
●Card may possibly be damaged.
●Try with a...")
- 91 - Message displays [Memory Card Error] [Memory card parameter error] ●Card is not of SD standard. ●When cards in capacities of 4 GB or more are used, only SDHC or SDXC Mem\ ory Cards are supported. [Read Error]/[Write Error] [Please check the card] ●Data read has failed. → Check whether card has been inserted correctly ( →12). ●Data write has failed. → Turn off power and remove card, before re-inserting and turning on power again.\ ●Card may possibly be damaged. ●Try with a...
Page 92
![Page 92
- 92 -
Q&A Troubleshooting
Try checking these items (→92 - 97) first.
If the problem persists, performing [Reset] in the [Setup] menu may reso\
lve the issue.
(Note that except for some items such as [Clock Set], all settings are \
returned to their
values from the time of purchase.)
Battery, power
Camera does not work even if power is turned on.
●Battery is not inserted correctly (→12), or needs recharging.
The power cuts off during use.
●Battery needs recharging.
●Camera is set to [Auto Power...](http://img.usermanuals.tech/thumb/58/65783/w300_dmc-fh6_en_adv_om_d-91.png "Page 92
- 92 -
Q&A Troubleshooting
Try checking these items (→92 - 97) first.
If the problem persists, performing [Reset] in the [Setup] menu may reso\
lve the issue.
(Note that except for some items such as [Clock Set], all settings are \
returned to their
values from the time of purchase.)
Battery, power
Camera does not work even if power is turned on.
●Battery is not inserted correctly (→12), or needs recharging.
The power cuts off during use.
●Battery needs recharging.
●Camera is set to [Auto Power...")
- 92 - Q&A Troubleshooting Try checking these items (→92 - 97) first. If the problem persists, performing [Reset] in the [Setup] menu may reso\ lve the issue. (Note that except for some items such as [Clock Set], all settings are \ returned to their values from the time of purchase.) Battery, power Camera does not work even if power is turned on. ●Battery is not inserted correctly (→12), or needs recharging. The power cuts off during use. ●Battery needs recharging. ●Camera is set to [Auto Power...
Page 93
![Page 93
- 93 -
Q&A Troubleshooting
Recording (Continued)
Brightness or coloring of recorded picture different from real life.
●When recording under fluorescent or LED lighting fixture etc., increasin\
g the shutter speed may
introduce slight changes to brightness and color. These are a result of the characteristics of the light
source and do not indicate a malfunction.
Red banding may appear on the LCD monitor or part or the entire
screen may have a reddish tint, when recording or pressing the shutter...](http://img.usermanuals.tech/thumb/58/65783/w300_dmc-fh6_en_adv_om_d-92.png "Page 93
- 93 -
Q&A Troubleshooting
Recording (Continued)
Brightness or coloring of recorded picture different from real life.
●When recording under fluorescent or LED lighting fixture etc., increasin\
g the shutter speed may
introduce slight changes to brightness and color. These are a result of the characteristics of the light
source and do not indicate a malfunction.
Red banding may appear on the LCD monitor or part or the entire
screen may have a reddish tint, when recording or pressing the shutter...")
- 93 - Q&A Troubleshooting Recording (Continued) Brightness or coloring of recorded picture different from real life. ●When recording under fluorescent or LED lighting fixture etc., increasin\ g the shutter speed may introduce slight changes to brightness and color. These are a result of the characteristics of the light source and do not indicate a malfunction. Red banding may appear on the LCD monitor or part or the entire screen may have a reddish tint, when recording or pressing the shutter...
Page 94
![Page 94
- 94 -
Q&A Troubleshooting
Flash
No flash emitted.
●Flash set to [Forced Flash Off] (→45).
●The flash is unavailable when using [Burst] (other than [Flash Burst] DMC-FH6 ) or when using
[Scenery], [Panorama Shot], [Night Scenery], [Sunset], or [Glass Through] Scene Modes.
Multiple flashes are emitted.
●Red-Eye Reduction is active ( →45). (Flashes twice to prevent eyes from appearing red.)
●[Burst] is set to [Flash Burst] DMC-FH6 (→60).
Playback
Pictures have been rotated.
●[Rotate Disp.] is set...](http://img.usermanuals.tech/thumb/58/65783/w300_dmc-fh6_en_adv_om_d-93.png "Page 94
- 94 -
Q&A Troubleshooting
Flash
No flash emitted.
●Flash set to [Forced Flash Off] (→45).
●The flash is unavailable when using [Burst] (other than [Flash Burst] DMC-FH6 ) or when using
[Scenery], [Panorama Shot], [Night Scenery], [Sunset], or [Glass Through] Scene Modes.
Multiple flashes are emitted.
●Red-Eye Reduction is active ( →45). (Flashes twice to prevent eyes from appearing red.)
●[Burst] is set to [Flash Burst] DMC-FH6 (→60).
Playback
Pictures have been rotated.
●[Rotate Disp.] is set...")
- 94 - Q&A Troubleshooting Flash No flash emitted. ●Flash set to [Forced Flash Off] (→45). ●The flash is unavailable when using [Burst] (other than [Flash Burst] DMC-FH6 ) or when using [Scenery], [Panorama Shot], [Night Scenery], [Sunset], or [Glass Through] Scene Modes. Multiple flashes are emitted. ●Red-Eye Reduction is active ( →45). (Flashes twice to prevent eyes from appearing red.) ●[Burst] is set to [Flash Burst] DMC-FH6 (→60). Playback Pictures have been rotated. ●[Rotate Disp.] is set...
Page 95
![Page 95
- 95 -
Q&A Troubleshooting
Playback (Continued)
Blackened red areas in recorded pictures.
●When digital red-eye correction (, ) is operating, if a subject is recorded that has skin-
colored areas with red areas inside, the digital red-eye correction func\
tion may blacken the red
areas.
→ We recommend setting the Flash Mode to
, or , or [Red-Eye Removal] to [OFF] before
recording.
The sound of recorded motion pictures is not audible.
●Be sure not to block the microphone with your fingers when...](http://img.usermanuals.tech/thumb/58/65783/w300_dmc-fh6_en_adv_om_d-94.png "Page 95
- 95 -
Q&A Troubleshooting
Playback (Continued)
Blackened red areas in recorded pictures.
●When digital red-eye correction (, ) is operating, if a subject is recorded that has skin-
colored areas with red areas inside, the digital red-eye correction func\
tion may blacken the red
areas.
→ We recommend setting the Flash Mode to
, or , or [Red-Eye Removal] to [OFF] before
recording.
The sound of recorded motion pictures is not audible.
●Be sure not to block the microphone with your fingers when...")
- 95 - Q&A Troubleshooting Playback (Continued) Blackened red areas in recorded pictures. ●When digital red-eye correction (, ) is operating, if a subject is recorded that has skin- colored areas with red areas inside, the digital red-eye correction func\ tion may blacken the red areas. → We recommend setting the Flash Mode to , or , or [Red-Eye Removal] to [OFF] before recording. The sound of recorded motion pictures is not audible. ●Be sure not to block the microphone with your fingers when...
Page 96
![Page 96
- 96 -
Q&A Troubleshooting
TV, computer, printer (Continued)
The card is not recognized by the computer.
(You are using an SDXC Memory Card.)
●Make sure your computer supports SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
●When you insert a card, a message will be displayed requesting you to fo\
rmat the card, but do not
format it.
●If [Access] remains displayed on the LCD monitor, turn off the camera and then disconnect the USB
cable.
Uploading to YouTube or...](http://img.usermanuals.tech/thumb/58/65783/w300_dmc-fh6_en_adv_om_d-95.png "Page 96
- 96 -
Q&A Troubleshooting
TV, computer, printer (Continued)
The card is not recognized by the computer.
(You are using an SDXC Memory Card.)
●Make sure your computer supports SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
●When you insert a card, a message will be displayed requesting you to fo\
rmat the card, but do not
format it.
●If [Access] remains displayed on the LCD monitor, turn off the camera and then disconnect the USB
cable.
Uploading to YouTube or...")
- 96 - Q&A Troubleshooting TV, computer, printer (Continued) The card is not recognized by the computer. (You are using an SDXC Memory Card.) ●Make sure your computer supports SDXC memory cards. http://panasonic.net/avc/sdcard/information/SDXC.html ●When you insert a card, a message will be displayed requesting you to fo\ rmat the card, but do not format it. ●If [Access] remains displayed on the LCD monitor, turn off the camera and then disconnect the USB cable. Uploading to YouTube or...
Page 97
![Page 97
- 97 -
Q&A Troubleshooting
Others
Menu not displayed in desired language.
●Change [Language] setting ( →39).
Camera rattles if shaken.
●This sound is made by the lens movement and is not a fault.
Red lamp illuminated when pressing shutter button halfway in dark locati\
ons.
●[AF Assist Lamp] is set to [ON] ( →62).
AF Assist Lamp is not illuminated.
●[AF Assist Lamp] is set to [OFF].
●Not illuminated in bright locations.
Camera is hot.
●Camera may become a little warm during use, but this does not...](http://img.usermanuals.tech/thumb/58/65783/w300_dmc-fh6_en_adv_om_d-96.png "Page 97
- 97 -
Q&A Troubleshooting
Others
Menu not displayed in desired language.
●Change [Language] setting ( →39).
Camera rattles if shaken.
●This sound is made by the lens movement and is not a fault.
Red lamp illuminated when pressing shutter button halfway in dark locati\
ons.
●[AF Assist Lamp] is set to [ON] ( →62).
AF Assist Lamp is not illuminated.
●[AF Assist Lamp] is set to [OFF].
●Not illuminated in bright locations.
Camera is hot.
●Camera may become a little warm during use, but this does not...")
- 97 - Q&A Troubleshooting Others Menu not displayed in desired language. ●Change [Language] setting ( →39). Camera rattles if shaken. ●This sound is made by the lens movement and is not a fault. Red lamp illuminated when pressing shutter button halfway in dark locati\ ons. ●[AF Assist Lamp] is set to [ON] ( →62). AF Assist Lamp is not illuminated. ●[AF Assist Lamp] is set to [OFF]. ●Not illuminated in bright locations. Camera is hot. ●Camera may become a little warm during use, but this does not...
Page 98
![Page 98
- 98 -
Usage cautions and notes
When in use
●Camera may become warm if used for long periods of time, but this is not\
a fault.
●Keep this unit as far away as possible from electromagnetic equipment (\
such as microwave
ovens, TVs, video games etc.).
• If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation.
• Do not use this unit near cell phones because doing so may result in noi\
se adversely affecting the...](http://img.usermanuals.tech/thumb/58/65783/w300_dmc-fh6_en_adv_om_d-97.png "Page 98
- 98 -
Usage cautions and notes
When in use
●Camera may become warm if used for long periods of time, but this is not\
a fault.
●Keep this unit as far away as possible from electromagnetic equipment (\
such as microwave
ovens, TVs, video games etc.).
• If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation.
• Do not use this unit near cell phones because doing so may result in noi\
se adversely affecting the...")
- 98 - Usage cautions and notes When in use ●Camera may become warm if used for long periods of time, but this is not\ a fault. ●Keep this unit as far away as possible from electromagnetic equipment (\ such as microwave ovens, TVs, video games etc.). • If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation. • Do not use this unit near cell phones because doing so may result in noi\ se adversely affecting the...
Page 99
![Page 99
- 99 -
Usage cautions and notes
Memory cards
●To prevent damage to cards and data
• Avoid high temperatures, direct sunlight, electromagnetic waves, and stat\
ic electricity.
• Do not bend, drop, or expose to strong impacts.
• Do not touch connectors on reverse of card or allow them to become dirty\
or wet.
●When disposing of/transferring memory cards
• If using the “format” or “delete” functions on your camera o\
r computer, this only changes the file management information, and does not...](http://img.usermanuals.tech/thumb/58/65783/w300_dmc-fh6_en_adv_om_d-98.png "Page 99
- 99 -
Usage cautions and notes
Memory cards
●To prevent damage to cards and data
• Avoid high temperatures, direct sunlight, electromagnetic waves, and stat\
ic electricity.
• Do not bend, drop, or expose to strong impacts.
• Do not touch connectors on reverse of card or allow them to become dirty\
or wet.
●When disposing of/transferring memory cards
• If using the “format” or “delete” functions on your camera o\
r computer, this only changes the file management information, and does not...")
- 99 - Usage cautions and notes Memory cards ●To prevent damage to cards and data • Avoid high temperatures, direct sunlight, electromagnetic waves, and stat\ ic electricity. • Do not bend, drop, or expose to strong impacts. • Do not touch connectors on reverse of card or allow them to become dirty\ or wet. ●When disposing of/transferring memory cards • If using the “format” or “delete” functions on your camera o\ r computer, this only changes the file management information, and does not...
Page 100
![Page 100
- 100 -
Usage cautions and notes
Lens
●If lens is dirty:
Images may appear slightly white if lens is dirty (fingerprints, etc.)\
. Turn the power on, hold the
extracted lens barrel with your fingers, and gently wipe the lens surfac\
e with a soft, dry cloth.
●Do not leave the lens exposed to direct sunlight.
●Do not touch the lens barrier, as this may damage lens. Be careful when removing camera from
bag, etc.
When using a tripod or unipod
●Do not apply excessive force or tighten screws when...](http://img.usermanuals.tech/thumb/58/65783/w300_dmc-fh6_en_adv_om_d-99.png "Page 100
- 100 -
Usage cautions and notes
Lens
●If lens is dirty:
Images may appear slightly white if lens is dirty (fingerprints, etc.)\
. Turn the power on, hold the
extracted lens barrel with your fingers, and gently wipe the lens surfac\
e with a soft, dry cloth.
●Do not leave the lens exposed to direct sunlight.
●Do not touch the lens barrier, as this may damage lens. Be careful when removing camera from
bag, etc.
When using a tripod or unipod
●Do not apply excessive force or tighten screws when...")
- 100 - Usage cautions and notes Lens ●If lens is dirty: Images may appear slightly white if lens is dirty (fingerprints, etc.)\ . Turn the power on, hold the extracted lens barrel with your fingers, and gently wipe the lens surfac\ e with a soft, dry cloth. ●Do not leave the lens exposed to direct sunlight. ●Do not touch the lens barrier, as this may damage lens. Be careful when removing camera from bag, etc. When using a tripod or unipod ●Do not apply excessive force or tighten screws when...