Panasonic Dmc Fh25 Owners Manual

							- 91 -
Playback/Editing
Press [ ].
Press 3 to select [OK], and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
Note
•When you print pictures stamped with text, the date will be printed over the stamped text if you 
specify printing of the date at the photo shop or on the printer.
•You can set up to 50 pictures at one time in [MULTI].•The picture quality may deteriorate when text stamping is carried out.•Depending on the printer being used, some characters may be cut at printing. Check before 
printing.
•When text is stamped onto the [ ] pictures, it is difficult to read it.•Text and dates cannot be stamped on the pictures in the following cases.–Motion pictures–Pictures recorded without setting the clock–Pictures with date or text stamped–Pictures recorded with other equipment 
						

							Playback/Editing
- 92 -
To allow easy posting to web pages, attachment to email etc., picture size (number of 
pixels) is reduced.
Select [Resize] on the [Playback] Mode menu.  (P35)
Press  3/4 to select [SINGLE] or [MULTI] and then press 
[MENU/SET].
Note
•You can set up to 50 pictures at one time in [MULTI].•The picture quality of the resized picture will deteriorate.•It may not be possible to resize pictures recorded with other equipment.•Motion pictures or still pictures with date or text stamped cannot be resized.
 [Resize]
Select the picture and size.
[SINGLE] setting
1Press  2/1  to select the picture, and then press 
[MENU/SET].
2Press  2/1  to select the size, and then press 
[MENU/SET].
•
Confirmation screen is displayed. It is executed when [Yes] 
is selected. 
Exit the menu after it is executed.
[MULTI] setting
1Press  3/4  to select the size, and then press 
[MENU/SET].
2Press  3/4 /2 /1 to select the picture, and then press 
[DISP.].
•
Repeat this step for each picture, and press [MENU/SET] to 
set.
•Confirmation screen is displayed. It is executed when [Yes] 
is selected. 
Exit the menu after it is executed. 
						

							- 93 -
Playback/Editing
You can enlarge and then clip the important part of the recorded picture.
Select [Cropping] on the [Playback] Mode menu. (P35)
Press  2/1 to select the picture, and then press [MENU/SET].
Use the zoom lever and press  3/4/2/1 to select the parts to be 
cropped.
Zoom lever (T): Enlargement
Zoom lever (W): Reduction
3 /4 /2 /1: Move
Press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
Note
•The picture quality of the cropped picture will deteriorate.•It may not be possible to crop pictures recorded with other equipment.•Motion pictures or still pictures with date or text stamped cannot be cropped.
  [Cropping] 
						

							Playback/Editing
- 94 -
You can do the following if a mark has been added to pictures and they have been set as 
favorites.
•
Play back only the pictures set as favorites. ([Favorite Play] in [Filtering Play])•Play back the pictures set as  favorites only as a Slide Show.•Delete all the pictures not set as favorites. ([All Delete Except Ü])
Select [Favorite] on the [Playback] Mode menu.  (P35)
Press  3/4 to select [SINGLE] or [MULTI] and then press 
[MENU/SET].
∫ Canceling all the [Favorite] settings
1Select [Favorite] on the [Playback] Mode menu.2Press  3/4  to select [CANCEL] and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
Note
•You can set up to 999 pictures as favorites.•You may not be able to set pictures taken with other equipment as favorites.
  [Favorite]
Select the picture, and then press 
[MENU/SET].
•The setting is canceled when
 [MENU/SET] is pressed again.
•Exit the menu after it is set.
[SINGLE] [MULTI]
Press  2/1  to 
select the picture. Press 
3/4 /2 /1 
to select the 
pictures. 
						

							- 95 -
Playback/Editing
DPOF “Digital Print Order Format” is a system that allows the user to select which pictures 
to print, how many copies of each picture to  print and whether or not to print the recording 
date on the pictures when using a DPOF compatible photo printer or photo printing store. 
For details, ask at your photo printing store.
When you want to use a photo printing store to  print pictures recorded on the built-in 
memory, copy them to a card  (P98) and then set the print setting.
For more information visit:
http://panasonic.jp/dc/dpof_110/white_e.htm
Select [Print Set] on the [Playback] Mode menu.  (P35)
Press  3/4 to select [SINGLE] or [MULTI] and then press 
[MENU/SET].
Press  3/4 to set the number of prints, and then press [MENU/SET] 
to set.
•When [MULTI] has been selected, repeat steps 3 and 4 for each picture. (It is not 
possible to use the same setting for a multiple number of pictures.)
•Exit the menu after it is set.
∫ Canceling all the [Print Set] settings
1Select [Print Set] on the [Playback] Mode menu.2Press  3/4  to select [CANCEL] and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
  [Print Set]
Select the picture, and then press 
[MENU/SET].
[SINGLE] [MULTI]
Press  2/1  to 
select the picture. Press 
3/4 /2 /1 
to select the 
pictures. 
						

							Playback/Editing
- 96 -
∫To print the date
After setting the number of prints, set/cancel  printing with the recording date by pressing 
[DISP.].
•
Depending on the photo printing store or the printer, the date may not be printed even if you set 
to print the date. For further information, ask at your photo printing store or refer to the 
operating instructions for the printer.
•The date cannot be printed on pictures with date or text stamped.
Note
•The number of prints can be set from 0 to 999.•Depending on the printer, the date print settings of the printer may take precedence so check if 
this is the case.
•It may not be possible to use the print settings  with other equipment. In this case, cancel all the 
settings, and reset the settings.
•[Print Set] cannot be set for motion pictures.•If the file is not based on the DCF standard, the print setting cannot be set. 
						

							- 97 -
Playback/Editing
You can set protection for pictures you do not want to be deleted by mistake.
Select [Protect] on the [Playback] Mode menu.  (P35)
Press  3/4 to select [SINGLE] or [MULTI] and then press [MENU/
SET].
∫ Canceling all the [Protect] settings1Select [Protect] on the [Playback] Mode menu.2Press  3/4  to select [CANCEL] and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
Note
•The protect setting may not be effective on other equipment.•Even if you protect pictures in the built-in memo ry or a card, they will be deleted if the built-in 
memory or the card is formatted.
•Even if you do not protect pictures on a card, they cannot be deleted when the card’s 
Write-Protect switch is set to [LOCK].
  [Protect]
Select the picture, and then press 
[MENU/SET].
•The settings are canceled when 
[MENU/SET] is pressed again.
•Exit the menu after it is set.
[SINGLE] [MULTI]
Press  2/1  to 
select the picture. Press 
3/4 /2 /1 
to select the 
pictures. 
						

							Playback/Editing
- 98 -
You can copy the data of the pictures you have taken from the built-in memory to a card or 
from a card to the built-in memory.
Select [Copy] on the [Playback] Mode menu. (P35)
Press  3/4 to select the copy destination and then press 
[MENU/SET].
(When [ ] is selected) Press  2/1 to select the picture and then 
press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
•Do not turn the camera off at any point during the copying process.
Note
•If a picture exists with the same name (folder numbe r/file number) as the picture to be copied in 
the copy destination when [ ] is selected, a new folder is created and the picture is copied. 
If a picture exists with the same name (folder numbe r/file number) as the picture to be copied in 
the copy destination when [ ] is selected, that picture is not copied.
•It may take time to copy the picture data.•[Print Set], [Protect] or [Favorite] settings will not be copied. Perform the settings again after 
copying is finished.
 [Copy]
:All the picture data in the built-in memory are copied onto the card at one time.
:One picture at a time is copied from the card to the built-in memory. 
						

							- 99 -
Connecting to other equipment
Connecting to other equipmentConnecting to a PC
You can transfer the pictures in the camera to a PC by connecting the camera and the PC.
•Some PCs can read directly from the card removed from the camera. For details, refer to the 
operating instructions of your PC.
•If the computer being used does not support SDXC Memory Cards, a message 
prompting you to format may appear. (Doing so will cause recorded images to be erased 
so do not choose to format.)
If the card is not recognized, please refer to the below support site.
http://panasonic.net/avc/sdcard/information/SDXC.html
Preparations:
Turn on the camera and the PC.
Remove the card before using the pictures in the built-in memory.
AUSB connection cable (supplied)•Check the directions of the connectors, and plug them straight in or unplug them straight out. 
(Otherwise the connectors may be bent out of shape which will cause a malfunction.)
B Align the marks, and insert.
•Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler 
(optional). If the remaining battery power becomes low while the camera and the PC are 
communicating, the alarm beeps.
Refer to 
“Disconnecting the USB connection cable safely” (P101)  before disconnecting the 
USB connection cable. Otherwise, data may be destroyed. 
						

							Connecting to other equipment
- 100 -
Connect the camera to a PC via the USB connection cable A 
(supplied).
•Do not use any other USB connection cables except the supplied one.
Use of cables other than the supplied USB connection cable may cause a malfunction.
Press  3/4 to select [PC], and then press [MENU/SET].
Operate the PC.
•You can save the images into the PC by drag and drop the image or the folder with the 
image you would like to transfer onto the different folder in the PC.
Note
•Before connecting or disconnecting the AC adaptor (optional), turn the camera off.•Before inserting or removing a card, turn the camera off and disconnect the USB connection 
cable. Otherwise, data may be destroyed.