Panasonic Dmc Fh22 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Dmc Fh22 Operating Instructions Manual. The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 21
![Page 21
Preparation
- 21 -
Setting the Menu
The camera comes with menus that allow you to set the settings for taking pictures and
playing them back just as you like and menus that enable you to have more fun with the
camera and use it more easily.
In particular, the [SETUP] menu contains some important settings relating to the camera’s
clock and power. Check the settings of this menu before proceeding to use the camera.
A [REC]/[PLAYBACK] selector switch
1[REC] Mode menu (P83 to 93)
5[PLAYBACK] Mode menu...](http://img.usermanuals.tech/thumb/58/65893/w300_dmc-fh22_en_adv_om_d-20.png "Page 21
Preparation
- 21 -
Setting the Menu
The camera comes with menus that allow you to set the settings for taking pictures and
playing them back just as you like and menus that enable you to have more fun with the
camera and use it more easily.
In particular, the [SETUP] menu contains some important settings relating to the camera’s
clock and power. Check the settings of this menu before proceeding to use the camera.
A [REC]/[PLAYBACK] selector switch
1[REC] Mode menu (P83 to 93)
5[PLAYBACK] Mode menu...")
Preparation - 21 - Setting the Menu The camera comes with menus that allow you to set the settings for taking pictures and playing them back just as you like and menus that enable you to have more fun with the camera and use it more easily. In particular, the [SETUP] menu contains some important settings relating to the camera’s clock and power. Check the settings of this menu before proceeding to use the camera. A [REC]/[PLAYBACK] selector switch 1[REC] Mode menu (P83 to 93) 5[PLAYBACK] Mode menu...
Page 22
![Page 22
Preparation
- 22 -
Setting menu items
This section describes how to select the Normal Picture Mode settings, and the same
setting can be used for the [PLAYBACK] menu and [SETUP] menu as well.
Example: Setting [AF MODE] from [2] to [3] in the Normal Picture Mode
OFFON1 Turn the camera on.A [REC]/[PLAYBACK] selector switch
B [MODE] button
C [MENU] button
2 Slide the [REC]/[PLA YBACK] selector switch to [1], and then press
[MODE].
• When selecting the [PLA YBACK] Mode menu settings, set the...](http://img.usermanuals.tech/thumb/58/65893/w300_dmc-fh22_en_adv_om_d-21.png "Page 22
Preparation
- 22 -
Setting menu items
This section describes how to select the Normal Picture Mode settings, and the same
setting can be used for the [PLAYBACK] menu and [SETUP] menu as well.
Example: Setting [AF MODE] from [2] to [3] in the Normal Picture Mode
OFFON1 Turn the camera on.A [REC]/[PLAYBACK] selector switch
B [MODE] button
C [MENU] button
2 Slide the [REC]/[PLA YBACK] selector switch to [1], and then press
[MODE].
• When selecting the [PLA YBACK] Mode menu settings, set the...")
Preparation - 22 - Setting menu items This section describes how to select the Normal Picture Mode settings, and the same setting can be used for the [PLAYBACK] menu and [SETUP] menu as well. Example: Setting [AF MODE] from [2] to [3] in the Normal Picture Mode OFFON1 Turn the camera on.A [REC]/[PLAYBACK] selector switch B [MODE] button C [MENU] button 2 Slide the [REC]/[PLA YBACK] selector switch to [1], and then press [MODE]. • When selecting the [PLA YBACK] Mode menu settings, set the...
Page 23
![Page 23
Preparation
- 23 -
5 Touch [AF MODE].• Touch [r] to move to the second screen. (P10)
6 Touch [3].• Depending on the item, its setting may not appear or it
may be displayed in a different way. (P10)
7 Touch [EXIT] to close the menu.](http://img.usermanuals.tech/thumb/58/65893/w300_dmc-fh22_en_adv_om_d-22.png "Page 23
Preparation
- 23 -
5 Touch [AF MODE].• Touch [r] to move to the second screen. (P10)
6 Touch [3].• Depending on the item, its setting may not appear or it
may be displayed in a different way. (P10)
7 Touch [EXIT] to close the menu.")
Preparation - 23 - 5 Touch [AF MODE].• Touch [r] to move to the second screen. (P10) 6 Touch [3].• Depending on the item, its setting may not appear or it may be displayed in a different way. (P10) 7 Touch [EXIT] to close the menu.
Page 24
![Page 24
Preparation
- 24 -
Using the Quick Menu
By using the Quick Menu, some of the menu settings can be easily found.In addition, various useful functions for recording can be used from the Quick Menu
screen.
• Some of the menu items cannot be set by the modes.
Q.MENU1 Press and hold [Q .MENU] when recording.
A
BC
2 Touch the icon and then touch the
setting you want.
A Item
B Settings
C The items to be set and the settings are
displayed.
•
T
o exit the Quick Menu and retrieve the
recording screen,...](http://img.usermanuals.tech/thumb/58/65893/w300_dmc-fh22_en_adv_om_d-23.png "Page 24
Preparation
- 24 -
Using the Quick Menu
By using the Quick Menu, some of the menu settings can be easily found.In addition, various useful functions for recording can be used from the Quick Menu
screen.
• Some of the menu items cannot be set by the modes.
Q.MENU1 Press and hold [Q .MENU] when recording.
A
BC
2 Touch the icon and then touch the
setting you want.
A Item
B Settings
C The items to be set and the settings are
displayed.
•
T
o exit the Quick Menu and retrieve the
recording screen,...")
Preparation - 24 - Using the Quick Menu By using the Quick Menu, some of the menu settings can be easily found.In addition, various useful functions for recording can be used from the Quick Menu screen. • Some of the menu items cannot be set by the modes. Q.MENU1 Press and hold [Q .MENU] when recording. A BC 2 Touch the icon and then touch the setting you want. A Item B Settings C The items to be set and the settings are displayed. • T o exit the Quick Menu and retrieve the recording screen,...
Page 25
![Page 25
Preparation
- 25 -
About the Setup Menu
Perform these settings if you need to.
[CLOCK SET], [SLEEP MODE] and [AUTO REVIEW] are important items. Check their
settings before using them.
•
In the Intelligent A
uto Mode, only [CLOCK SET], [WORLD TIME], [BEEP], [LANGUAGE]
and [STABILIZER DEMO.] can be set.
For details on how to select the [SETUP] menu settings, refer to P22.
n [CLOCK SET] Setting Date/Time .
•
Ref
er to P19 for details.
r [WORLD TIME] Set the time in your home area and travel...](http://img.usermanuals.tech/thumb/58/65893/w300_dmc-fh22_en_adv_om_d-24.png "Page 25
Preparation
- 25 -
About the Setup Menu
Perform these settings if you need to.
[CLOCK SET], [SLEEP MODE] and [AUTO REVIEW] are important items. Check their
settings before using them.
•
In the Intelligent A
uto Mode, only [CLOCK SET], [WORLD TIME], [BEEP], [LANGUAGE]
and [STABILIZER DEMO.] can be set.
For details on how to select the [SETUP] menu settings, refer to P22.
n [CLOCK SET] Setting Date/Time .
•
Ref
er to P19 for details.
r [WORLD TIME] Set the time in your home area and travel...")
Preparation - 25 - About the Setup Menu Perform these settings if you need to. [CLOCK SET], [SLEEP MODE] and [AUTO REVIEW] are important items. Check their settings before using them. • In the Intelligent A uto Mode, only [CLOCK SET], [WORLD TIME], [BEEP], [LANGUAGE] and [STABILIZER DEMO.] can be set. For details on how to select the [SETUP] menu settings, refer to P22. n [CLOCK SET] Setting Date/Time . • Ref er to P19 for details. r [WORLD TIME] Set the time in your home area and travel...
Page 26
![Page 26
Preparation
- 26 -
! [BEEP]This allo ws you to set the beep and shutter sound.
!
[BEEP LEVEL]:
[
"]
(Muted)
[
#] (Lo w)
[$] (High)1
[SHUTTER
VOL.]:
[2]
(Muted)
[
3] (Lo w)
[4] (High)
%
[BEEP
TONE]:
[&]/[']/[(] 5
[SHUTTER
TONE]:
[\f]/[7]/[8]
$ [VOLUME] Adjust the volume of the speaker to any of 7 levels.
•
When y
ou connect the camera to a TV, the volume of the TV speakers does not change.](http://img.usermanuals.tech/thumb/58/65893/w300_dmc-fh22_en_adv_om_d-25.png "Page 26
Preparation
- 26 -
! [BEEP]This allo ws you to set the beep and shutter sound.
!
[BEEP LEVEL]:
[
\"]
(Muted)
[
#] (Lo w)
[$] (High)1
[SHUTTER
VOL.]:
[2]
(Muted)
[
3] (Lo w)
[4] (High)
%
[BEEP
TONE]:
[&]/[']/[(] 5
[SHUTTER
TONE]:
[\f]/[7]/[8]
$ [VOLUME] Adjust the volume of the speaker to any of 7 levels.
•
When y
ou connect the camera to a TV, the volume of the TV speakers does not change.")
Preparation - 26 - ! [BEEP]This allo ws you to set the beep and shutter sound. ! [BEEP LEVEL]: [ "] (Muted) [ #] (Lo w) [$] (High)1 [SHUTTER VOL.]: [2] (Muted) [ 3] (Lo w) [4] (High) % [BEEP TONE]: [&]/[']/[(] 5 [SHUTTER TONE]: [\f]/[7]/[8] $ [VOLUME] Adjust the volume of the speaker to any of 7 levels. • When y ou connect the camera to a TV, the volume of the TV speakers does not change.
Page 27
![Page 27
Preparation
- 27 -
- [LCD MODE]These men u settings make it easier to see the LCD
monitor when you are in bright places or when you are
holding the camera high above your head.
[OFF]
\b
[A
UTO POWER LCD]:
The brightness is adjusted automatically depending on
how bright it is around the camera.
c
[PO
WER LCD]:
The LCD monitor becomes brighter and easier to see
even when taking pictures outdoors.
y
[HIGH ANGLE]:
The LCD monitor is easier to see when taking pictures
with the camer
a held high...](http://img.usermanuals.tech/thumb/58/65893/w300_dmc-fh22_en_adv_om_d-26.png "Page 27
Preparation
- 27 -
- [LCD MODE]These men u settings make it easier to see the LCD
monitor when you are in bright places or when you are
holding the camera high above your head.
[OFF]
\b
[A
UTO POWER LCD]:
The brightness is adjusted automatically depending on
how bright it is around the camera.
c
[PO
WER LCD]:
The LCD monitor becomes brighter and easier to see
even when taking pictures outdoors.
y
[HIGH ANGLE]:
The LCD monitor is easier to see when taking pictures
with the camer
a held high...")
Preparation - 27 - - [LCD MODE]These men u settings make it easier to see the LCD monitor when you are in bright places or when you are holding the camera high above your head. [OFF] \b [A UTO POWER LCD]: The brightness is adjusted automatically depending on how bright it is around the camera. c [PO WER LCD]: The LCD monitor becomes brighter and easier to see even when taking pictures outdoors. y [HIGH ANGLE]: The LCD monitor is easier to see when taking pictures with the camer a held high...
Page 28
![Page 28
Preparation
- 28 -
P [SLEEP MODE]Y ou can conserve the battery life.
The camera is automatically turned off if the camera
has not been used for the time selected on the setting.
[OFF]/[2MIN.]/[5MIN.]/[10MIN.]
•
Press the shutter b
utton halfway or turn the camera off and on to cancel
[SLEEP MODE].
•
[SLEEP MODE] is set to [5MIN.] in the Intelligent A
uto Mode.
•
[SLEEP MODE] does not w
ork in the following cases.
– When using the A
C adaptor
– When connecting to a PC or a pr
inter
– When...](http://img.usermanuals.tech/thumb/58/65893/w300_dmc-fh22_en_adv_om_d-27.png "Page 28
Preparation
- 28 -
P [SLEEP MODE]Y ou can conserve the battery life.
The camera is automatically turned off if the camera
has not been used for the time selected on the setting.
[OFF]/[2MIN.]/[5MIN.]/[10MIN.]
•
Press the shutter b
utton halfway or turn the camera off and on to cancel
[SLEEP MODE].
•
[SLEEP MODE] is set to [5MIN.] in the Intelligent A
uto Mode.
•
[SLEEP MODE] does not w
ork in the following cases.
– When using the A
C adaptor
– When connecting to a PC or a pr
inter
– When...")
Preparation - 28 - P [SLEEP MODE]Y ou can conserve the battery life. The camera is automatically turned off if the camera has not been used for the time selected on the setting. [OFF]/[2MIN.]/[5MIN.]/[10MIN.] • Press the shutter b utton halfway or turn the camera off and on to cancel [SLEEP MODE]. • [SLEEP MODE] is set to [5MIN.] in the Intelligent A uto Mode. • [SLEEP MODE] does not w ork in the following cases. – When using the A C adaptor – When connecting to a PC or a pr inter – When...
Page 29
![Page 29
Preparation
- 29 -
s [AUTO REVIEW]Set the length of time that the picture is displayed after
taking it.
[OFF]
[1SEC.]
[2SEC.]
[HOLD]:
The pictures are displa
yed until one of the
buttons is pressed.
•
[A
UTO REVIEW] is activated regardless of its setting when using [HI-SPEED BURST]
(P70), [FLASH BURST] (P71) and [PHOTO FRAME] (P74) in Scene Mode and [BURST]
(P90).
•
In Intelligent A
uto Mode, the Auto Review function is fixed to [2SEC.].
•
[A
UTO REVIEW] does not work in Motion...](http://img.usermanuals.tech/thumb/58/65893/w300_dmc-fh22_en_adv_om_d-28.png "Page 29
Preparation
- 29 -
s [AUTO REVIEW]Set the length of time that the picture is displayed after
taking it.
[OFF]
[1SEC.]
[2SEC.]
[HOLD]:
The pictures are displa
yed until one of the
buttons is pressed.
•
[A
UTO REVIEW] is activated regardless of its setting when using [HI-SPEED BURST]
(P70), [FLASH BURST] (P71) and [PHOTO FRAME] (P74) in Scene Mode and [BURST]
(P90).
•
In Intelligent A
uto Mode, the Auto Review function is fixed to [2SEC.].
•
[A
UTO REVIEW] does not work in Motion...")
Preparation - 29 - s [AUTO REVIEW]Set the length of time that the picture is displayed after taking it. [OFF] [1SEC.] [2SEC.] [HOLD]: The pictures are displa yed until one of the buttons is pressed. • [A UTO REVIEW] is activated regardless of its setting when using [HI-SPEED BURST] (P70), [FLASH BURST] (P71) and [PHOTO FRAME] (P74) in Scene Mode and [BURST] (P90). • In Intelligent A uto Mode, the Auto Review function is fixed to [2SEC.]. • [A UTO REVIEW] does not work in Motion...
Page 30
![Page 30
Preparation
- 30 -
^ [USB MODE]Select the USB comm unication system after or before
connecting the camera to your PC or your printer with
the USB connection cable (supplied).
g
[SELECT ON CONNECTION]:
Select either [PC] or [PictBr
idge(PTP)] if you connected
the camera to a PC or a printer supporting PictBridge.
h
[PictBridg
e(PTP)]:
Set after or before connecting to a printer supporting
PictBridge.
j
[PC]:
Set after or bef
ore connecting to a PC.
•
When [PC] is selected, the camer
a is...](http://img.usermanuals.tech/thumb/58/65893/w300_dmc-fh22_en_adv_om_d-29.png "Page 30
Preparation
- 30 -
^ [USB MODE]Select the USB comm unication system after or before
connecting the camera to your PC or your printer with
the USB connection cable (supplied).
g
[SELECT ON CONNECTION]:
Select either [PC] or [PictBr
idge(PTP)] if you connected
the camera to a PC or a printer supporting PictBridge.
h
[PictBridg
e(PTP)]:
Set after or before connecting to a printer supporting
PictBridge.
j
[PC]:
Set after or bef
ore connecting to a PC.
•
When [PC] is selected, the camer
a is...")
Preparation - 30 - ^ [USB MODE]Select the USB comm unication system after or before connecting the camera to your PC or your printer with the USB connection cable (supplied). g [SELECT ON CONNECTION]: Select either [PC] or [PictBr idge(PTP)] if you connected the camera to a PC or a printer supporting PictBridge. h [PictBridg e(PTP)]: Set after or before connecting to a printer supporting PictBridge. j [PC]: Set after or bef ore connecting to a PC. • When [PC] is selected, the camer a is...