Panasonic Dmc Fh22 Basic Operating Instructions Manual

							11(ENG) VQT2K90
Preparation
Charging the Battery
 
						

							12VQT2K90 (ENG)
Preparation
11  Attach the battery paying attention to the direction of the battery.
•  Charging starts when the [CHARGE] 
indicator A lights green.
90°A
22  Detach the battery after charging is completed.
•  Charging is complete when the 
[CHARGE] indicator A turns off.
 
						

							13(ENG) VQT2K90
Preparation
About the Built-in Memory/the Card
Built-in Memory
•  Memory size: Approx. 40 MB
•  The built-in memory can be used as a temporary storage device  when the card being used becomes full.
•  The access time for the built-in memory may be longer than the  access time for a card.
Card
The following types of cards can be used with this unit.
(These cards are indicated as card in the text.)
Type of card Remarks
SD Memory Card (8 MB to 2 GB)
You can use an SDHC Memory 
Card or an SDXC Memory Card 
in equipment that is compatible 
with those cards.
•  Before using SDXC Memory  Cards, check your computer 
and other devices support this 
type of card.
http://panasonic.net/avc/sdcard/
information/SDXC.html
SDHC Memory Card 
(4 GB to 32 GB)
SDXC Memory Card 
(48 GB to 64 GB)
•  If you use cards between 4 GB and 32 GB capacity, confi
 rm SDHC logo 
on the card (indicating compliance with the SD standard).
•  If you use cards between 48 GB and 64 GB capacity, confi  rm SDXC 
logo on the card (indicating compliance with the SD standard).
• Please confi  rm the latest information on the following website.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
  Note
•  Keep the Memory Card out of reach of children to prevent swallowing.
725,@%.$)1@&/JOEE


 725,@%.$)1@&/JOEE


 






 
						

							14VQT2K90 (ENG)
Preparation
•  Check that this unit is turned off.
•  We recommend using a Panasonic card.
OPEN LOCK11  Slide the release lever in the direction of the arrow and 
open the card/battery door.
•  Always use genuine Panasonic 
batteries (CGA-S/106B: supplied 
or DMW-BCF10PP: optional).
•  If you use other batteries, we  cannot guarantee the quality of this product.
CARD
BATTERYA
B
22  Battery: Insert until it is  locked by the lever A being 
careful about the direction 
you insert it. Pull the lever A 
in the direction of the arrow to 
remove the battery.
  Card: Push it fully until it  clicks being careful about 
the direction you insert it. To 
remove the card, push the card until it clicks, then 
pull the card out upright.
B: Do not touch the connection terminals of the card.
•  The card may be damaged if it is not fully inserted.
OPEN LOCK
1 2
33 
1:  Close the card/battery 
door.
2 :  Slide the release lever in 
the direction of the arrow.
Inserting and Removing the Card (optional)/the Battery
725,@%.$)1@&/JOEE


 725,@%.$)1@&/JOEE


 






 
						

							15(ENG) VQT2K90
Preparation
Setting Date/Time (Clock Set)
•  The clock is not set when the camera is shipped.
OFFON11  Turn the camera on.
22  Touch [CLOCK SET].
33 Touch [e]/[r]/[w]/[q] for each item to set year, month, 
day, hour, minute, display sequence or time display 
format, and touch [SET].
4:   Cancel without setting the clock.
44  Touch [SET] to set.
Changing the clock setting
Select [CLOCK SET] in the 1[REC] or e[SETUP] menu.
•  It can be changed in step 3 to set the clock.
725,@%.$)1@&/JOEE


 725,@%.$)1@&/JOEE


 






 
						

							16VQT2K90 (ENG)
Preparation
Setting the Menu
This section describes how to select the Normal Picture Mode settings, 
and the same setting can be used for the [PLAYBACK] menu and 
[SETUP] menu as well.
Example: Setting [AF MODE] from [2] to [3] in the Normal Picture 
Mode
11  Press [MENU] to display the menu.MENU
22  Touch [AF MODE].• Touch [r] to move to the second screen. 
33 Touch [3].•  Depending on the item, its setting may not appear or it may be displayed in a 
different way.
44  Touch [EXIT] to close the menu.
Switching to the [SETUP] menu
Touch the [SETUP] menu icon e.
725,@%.$)1@&/JOEE


 725,@%.$)1@&/JOEE


 






 
						

							17(ENG) VQT2K90
Preparation
Selecting the [REC] Mode
4Intelligent Auto Mode (P18)
The subjects are recorded using settings automatically selected 
by the camera.
 
						

							18VQT2K90 (ENG)
Basic
Taking Pictures Using the Automatic Function 
(4: Intelligent Auto Mode)
[REC] Mode: 4
The camera will set the most appropriate settings to match the subject 
and the recording conditions so we recommend this mode for 
beginners or those who want to leave the settings to the camera and 
take pictures easily.
AA [ 4] button
11  Slide the [REC]/[PLAYBACK] 
selector switch to [
1].
22 Press [4].
33  Hold the camera gently with both hands, keep your arms still at your side and stand with your feet 
slightly apart.
2
144  Press the shutter button halfway to focus.
•  The focus indication 1 (green) 
lights when the subject is 
focused.
•  The AF area 2 is displayed  around the subject’s face by the 
face detection function. In other cases, it is displayed at the 
point on the subject which is in focus.
•  The focus range is 5 cm (0.17 feet) (Wide)/1.0 m (3.28 feet)  (Tele) to 7.
55  Press the shutter button fully (push it in further), and take the picture.
725,@%.$)1@&/JOEE


 725,@%.$)1@&/JOEE


 






 
						

							19(ENG) VQT2K90
Basic
Scene Detection
When the camera identifi es the optimum scene, the icon of the scene 
concerned is displayed in blue for 2 seconds, after which its color 
changes to the usual red.
4  3 [i-PORTRAIT]
5 [i-NIGHT PORTRAIT]
• Only when [w] is selected
4 [i-SCENERY] 1 [i-NIGHT SCENERY]
2 [i-MACRO] 7 [i-SUNSET]
• [4] is set if none of the scenes are applicable, and the standard  settings are set.
• When [3] or [5] is selected, the camera automatically detects  a person’s face, and it will adjust the focus and exposure (Face 
Detection).
725,@%.$)1@&/JOEE


 725,@%.$)1@&/JOEE


 






 
						

							20VQT2K90 (ENG)
Basic
Motion Picture Mode
[REC] Mode: 6
11  Slide the [REC]/[PLAYBACK] selector switch to [1], and then press [MODE].
22 Touch [MOTION PICTURE].
B
C
A33  Press the shutter button halfway to focus and 
then press it fully to start 
recording.
A Audio recording
•  The available recording time B  is displayed on the top right and 
the elapsed recording time C is 
displayed on the bottom right of 
the screen.
•  After pressing the shutter button fully, release it straight away.
•  When the subject is focused, the focus indication lights.
•  The focus and zoom are fi  xed to the setting when recording 
starts (the fi  rst frame).
•  The audio is also recorded simultaneously from the built-in  microphone on this unit. (Motion pictures cannot be recorded 
without audio.)
44  Press the shutter button fully to stop recording.•  If the built-in memory or the card becomes full in the middle of recording, the camera stops recording automatically.
725,@%.$)1@&/JOEE


 725,@%.$)1@&/JOEE