Panasonic Dmc 3d1 Owners Manual

- 131 -
Connecting to other equipment
Connect this unit to a Panasonic TV compatible with VIERA Link with 
an HDMI mini cable (optional) (P128).
Turn the camera on, and set to the Playback Mode.
Operate with the remote control for the TV.
•Operate with reference to the operation icons displayed on the screen.
Panasonic TV compatible with VIERA Link
Playback using VIERA Link (HDMI)
What is the VIERA Link (HDMI) (HDAVI Control™)?
•VIERA Link™ is a new name for EZ Sync™.•This function allows you to use your...

Connecting to other equipment
- 132 -
Note
•To play back the audio of the motion pictures, set the [Sound] in the Slide Show setting screen 
to [AUTO] or [AUDIO].
•Operation icons are hidden, if no operation is performed for a while when the operation icons 
are displayed. Operation icons are displayed when one of the following buttons is pressed 
while the operation icons are not displayed.
–3/ 4/2 /1, [OK], [SUB MENU], Red button, Green button, Yellow button•It is recommended to connect this unit to an...

- 133 -
Connecting to other equipment
Saving the Recorded Still Pictures and Motion 
Pictures
Methods to export still pictures and motion pictures to other devices will vary depending on 
the file format. (JPEG, MPO, AVCHD, MP4 or 3D motion pictures). Here are a few 
suggestions.
File formats that can be used: [JPEG], [AVCHD]
It is possible to copy onto Blu-ray disc, DVD disc, or hard disk by inserting an SD card with 
still pictures and motion pictures recorded by this unit into a Panasonic Blu-ray Disc...

Connecting to other equipment
- 134 -
File formats that can be used: [AVCHD], [MP4]
Copy images played back with this unit to Blu-ray disc, DVD disc, hard disk, or video using 
a Blu-ray Disc Recorder, DVD recorder, or video.
This can be played back with equipment that is not compatible with high definition, so it is 
convenient for distributing copies. Image will be standard quality instead of high definition 
at this time.
1Connect this unit with the recording equipment with an AV cable (optional)....

- 135 -
Connecting to other equipment
File formats that can be used: [JPEG], [MPO], [AVCHD], [MP4], [3D motion pictures]
It is possible to acquire still pictures and motion pictures recorded in [AVCHD] or [MP4] 
formats, or create conventional standard quality DVD video from the motion picture that 
was recorded as [AVCHD], using “ PHOTOfunSTUDIO ” in the CD-ROM (supplied).
Also, you can write images to DVD, combine multiple 
pictures to create a single  panorama picture, or create a 
slide show by...

Connecting to other equipment
- 136 -
Connecting to a PC
You can transfer the pictures in the camera to a PC by connecting the camera and the PC.
•Some PCs can read directly from the card removed from the camera. For details, refer to the 
operating instructions of your PC.
•If the computer being used does not support SDXC Memory Cards, a message prompting you 
to format may appear. (Doing so will cause reco rded images to be erased so do not choose to 
format.)
If the card is not recognized, please...

- 137 -
Connecting to other equipment
Preparations:
Turn on the camera and the PC.
Remove the card before using the pictures in the built-in memory.
AUSB connection cable (supplied)•Check the directions of the connectors, and plug them straight in or unplug them straight out. 
(Otherwise the connectors may be bent out of shape which may cause malfunction.)
B Align the marks, and insert.
•Use a battery with sufficient battery power. If the remaining battery power becomes low while 
the camera and the PC...

Connecting to other equipment
- 138 -
Note
•Before inserting or removing a card, turn the camera off and disconnect the USB connection 
cable. Otherwise, data may be destroyed.
∫ Viewing the contents of the built-in memory or card using the PC (folder 
composition)
A new folder is created when pictures are taken in the following situations.
•
After [No.Reset]  (P56) in the [Setup] menu has been executed•When a card containing a folder with the same folder number has been inserted (Such as when 
pictures...

- 139 -
Connecting to other equipment
∫Disconnecting the USB connection cable safely
Select the [ ] icon in task tray displayed on the PC, and then click [Eject 
DMC-XXX] (XXX varies by model).
•
Depending on your PC’s settings, this icon may not be displayed.•If the icon is not displayed, check that [Access] is not displayed on the LCD monitor of the 
digital camera before removing the hardware.
∫ Connection in the PTP Mode (WindowsR XP, Windows VistaR, WindowsR 7 and 
Mac OS X only)
Set [USB Mode] to...

Connecting to other equipment
- 140 -
Printing the Pictures
If you connect the camera to a printer supporting PictBridge, you can select the pictures to 
be printed out and instruct that printing be started from the camera’s LCD monitor.
•
Some printers can print directly from the card removed from the camera. For details, refer to 
the operating instructions of your printer.
Preparations:
Turn on the camera and the printer.
Remove the card before printing the pictures from the built-in memory.
Perform...