Panasonic DLP Projector PT-DZ680U PT-DZ680UL Operating Instructions

							ENGLISH - 81
Chapter 4 Settings — [PROJECTOR SETUP] menu
[SUB MEMORY] Switches the sub memory. (
x page 85)
[SYSTEM SELECTOR] Switches the [SYSTEM SELECTOR] setting. (
x page 57)
[SYSTEM DAYLIGHT VIEW] Switches the [SYSTEM DAYLIGHT VIEW] setting. (
x page 55)
[FREEZE] Temporarily freezes video to be a still image. (
x page 71)
[SIDE BY SIDE] Switches to the two window display. (
x page 71)
[ASPECT] Switches the aspect setting. (
x page 58)
[DATE AND TIME]
Set the time zone, date, and time of the built-in clock of the projector\
.
To set time zone
1) Press as to select [DATE AND TIME].
2) Press the  button.
r
f The 
[DATE AND TIME]  screen is displayed.
3) Press as to select [TIME ZONE].
4) Press qw to switch [TIME ZONE].
To set the date and time manually
1) Press as to select [DATE AND TIME].
2) Press the  button.
r
f The 
[DATE AND TIME]  screen is displayed.
3) Press as to select [ADJUST CLOCK].
4) Press the  button.
r
f The 
[ADJUST CLOCK]  screen is displayed.
5) Press as to select an item, and press  qw to 
set the local date and time.
6) Press as to select [APPLY], and press the 
 button.
r
f The setting of the time will be completed.
To set the date and time automatically
1) Press as to select [DATE AND TIME].
2) Press the  button.
r
f The 
[DATE AND TIME]  screen is displayed.
3) Press as to select [ADJUST CLOCK].
4) Press the  button.
r
f The 
[ADJUST CLOCK]  screen is displayed.
5) Press as to select [NTP SYNCHRONIZATION], 
and press qw to change the setting to [ON].
r
f The setting will change between [ON] and [OFF] each time you 
press the button.
6) Press as to select [APPLY], and press the 
 button.
r
f The setting of the time will be completed.
r
r [NTP SYNCHRONIZATION]
[ON]
Enables [NTP SYNCHRONIZATION].
[OFF] Disables [NTP SYNCHRONIZATION].
Note
r
f To set the date and time automatically, the projector must be connected to the network.
r
f If synchronization with the NTP server fails just after [NTP SYNCHRONIZATION] is turned [ON], or if [NTP SYNCHRONIZATION] is turned 
[ON] while the NTP server is not set, [NTP SYNCHRONIZATION] will return to [OFF].
r
f Access the projector via a web browser to set the NTP server. Refer to “[Adjust clock] page” (
x page 97) for details.
[SAVE ALL USER DATA]
Save the various setting values as a backup in the built-in memory of th\
e projector.
1) Press as to select [SAVE ALL USER DATA].
2) Press the  button.
r
f The 
[SECURITY PASSWORD]  screen is displayed.
3) Enter a security password and press the 
 button.
4) When the confirmation is displayed, select [OK] 
or [CANCEL], and press the  button.
r
f [PROGRESS] is displayed while saving data.
Note
r
f The image setting registered in [USER LOGO] is not saved.  
						

							82 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
[LOAD ALL USER DATA]
Load the various setting values saved as a backup in the built-in memory\
 of the projector.
1) Press as to select [LOAD ALL USER DATA].
2) Press the  button.
r
f The 
[SECURITY PASSWORD]  screen is displayed.
3) Enter a security password and press the 
 button.
4) When the confirmation is displayed, select [OK] 
or [CANCEL], and press the  button.
Note
r
f The projector will go into the standby status to reflect the setting values when [LOAD 
ALL USER DATA] is executed.
[INITIALIZE]
Return various setting values to their factory default settings.
1) Press as to select [INITIALIZE].
2) Press the  button.
r
f The 
[SECURITY PASSWORD]  screen is displayed.
3) Enter a security password and press the 
 button.
r
f The 
[INITIALIZE]  screen is displayed.
4) Press as to select an item to initialize.
5) Press the  button.
6) When the confirmation is displayed, select [OK] 
or [CANCEL], and press the  button.
r
r Items that can be initialized
[ALL USER DATA] All setting items including [ENTRY SIGNAL], [NETWORK SETUP], [E-mail set up], and [USER LOGO] are 
returned to factory default values.
The projector will go into the standby status to reflect the setting values.
[ENTRY SIGNAL] Deletes all the setting values saved for each input signal.
To delete only a part of a registered signal, perform the procedure descr\
ibed in “Deleting the registered 
data” (
x page 84).
[NETWORK/E-MAIL] Returns [NETWORK SETUP] and [E-mail set up] to factory default settings.
[LOGO IMAGE] Deletes the image registered in [USER LOGO].
[SERVICE PASSWORD]
Used by a service person.  
						

							ENGLISH - 83
Chapter 4 Settings — [TEST PATTERN] menu
[TEST PATTERN] menu
Select [TEST PATTERN] from the main menu.
Refer to “Navigating through the menu” (
x page 49) for the operation of the menu screen.
r
f Press 
qw to switch.
[TEST PATTERN]
Displays the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before performing various 
adjustments.
1) Press qw to switch [TEST PATTERN].
r
f The setting will change among “Menu screen + Focus”, “Menu 
screen + Entry screen”*, “Menu screen + All white”, “Menu 
screen + All black”, “Menu screen + Flag”, “Menu screen + Flag 
(inversion)”, “Menu screen + Window”, “Menu screen + Window 
(inversion)”, “Menu screen + Color bar (vertical)”, and “Menu 
screen + Color bar (horizontal)” each time you press the button.
* 
The test pattern built-in to the projector is not being displayed.
r
r [TEST PATTERN]
Menu screen + Focus
Displays a test pattern with the menu screen. Select a test pattern so that it is easy to 
make various adjustments.
Menu screen + Entry screen
Menu screen + All white
Menu screen + All black Menu screen + Flag
Menu screen + Flag (inversion) Menu screen + Window
Menu screen + Window (inversion) Menu screen + Color bar (vertical)
Menu screen + Color bar (horizontal)
Note
r
f Press the  button on the remote control while the test pattern is displayed to hide the menu screen.  
						

							84 - ENGLISH
Chapter 4 Settings — [SIGNAL LIST] menu
[SIGNAL LIST] menu
Select [SIGNAL LIST] from the main menu.
Refer to “Navigating through the menu” (
x page 49) for the operation of the menu screen.
r
r Registered signal status
r
f A name can be set for each sub memory (
x page 85).
r
f Memory number:
$
:KHQWKHDGGUHVVQXPEHU$
$+
+LVUHJLVWHUH G
6XEPHPRU\QXPEH
U
Registering a signal to the list
After a new signal is input and the  button on the remote control or the control panel is pressed, the registration is completed and the 
[MAIN MENU] screen is displayed.
Note
r
f Up to 96 signals, including sub memories, can be registered to the projector
.
r
f There are 12 pages (eight memories of A through L, with eight memories possible on each page) for memory numbers, and it is registered to 
the lowest number that is available. If there is no available memory number it will be overwritten from the oldest signal.
r
f The names to be registered are automatically determined by the input sig\
nals and memory numbers.
r
f If a menu is being displayed, the new signals will be registered at the instant they are input.
Renaming the registered data
Registered signals can be renamed.
1) Press asqw
 to select the signal for which 
details are to be displayed.
2) Press the  button.
r
f The 
[REGISTERED SIGNAL STATUS]  screen is displayed.
r
f The memory number, input terminal, input signal name, 
frequency, synchronization signal, etc., are displayed.
r
f Press the  button to return to the 
[REGISTERED 
SIGNAL LIST]  screen.
3) Press the  button.
r
f The 
[REGISTERED SIGNAL SETUP]  screen is displayed.
4) Press as to select [SIGNAL NAME CHANGE].
5) Press the  button.
r
f The 
[SIGNAL NAME CHANGE]  screen is displayed.
6) Press asqw to select the text, and press the 
 button to enter the text.
7) After the name is changed, press asqw  to 
select [OK], and press the  button.
r
f The registration is completed and it will return to the 
[REGISTERED SIGNAL SETUP]
 screen.
r
f When pressing 
asqw to select [CANCEL] and pressing 
the  button, the changed signal name will not be 
registered and an automatically registered signal name will be 
used.
Deleting the registered data
Registered signals can be deleted.
1) Press asqw  to select the signal to delete.
2) Press the  button.
r
f The 
[ENTRY SIGNAL DELETE]  screen is displayed.
r
f To cancel the deletion, press the  button to return to 
the 
[REGISTERED SIGNAL LIST]  screen.
3) Press the  button.
r
f The selected signal will be deleted.
Note
r
f A signal can also be deleted from [ENTRY SIGNAL DELETE] on the 
[REGISTERED SIGNAL SETUP] screen.           
						

							ENGLISH - 85
Chapter 4 Settings — [SIGNAL LIST] menu
Protecting the registered data
Registered signals can be protected.
1) Press asqw  to select the signal to protect.
2) Press the  button.
r
f The 
[REGISTERED SIGNAL STATUS]  screen is displayed.
3) Press the  button.
r
f The 
[REGISTERED SIGNAL SETUP]  screen is displayed.
4) Press as to select [LOCK].
5) Press qw to switch [LOCK].
r
f The setting will change between [OFF] and [ON] each time you 
press the button.
r
r [LOCK]
[OFF]
The signal is not protected.
[ON] The signal is protected.
Note
r
f When [LOCK] is set to [ON], signal delete, image adjustment and auto setup are not available. 
To perform these operations, set [LOCK] to 
[OFF].
r
f A signal can be registered to sub memory even if it is protected.
r
f Even a protected signal will be deleted if [INITIALIZE] is executed.
Expanding signal lock-in range
Signal lock-in range can be expanded.
1) Press asqw
 to select the signal to set.
2) Press the  button.
r
f The 
[REGISTERED SIGNAL STATUS]  screen is displayed.
3) Press the  button.
r
f The 
[REGISTERED SIGNAL SETUP]  screen is displayed.
4) Press as to select [LOCK-IN RANGE].
5) Press qw to switch [LOCK-IN RANGE].
r
f The setting will change between [NARROW] and [WIDE] each 
time you press the button.
r
r [LOCK-IN RANGE]
[NARROW]
Select in most cases.
[WIDE] Widens the lock-in range.
Note
r
f Switch the range that determines that a signal to be input is the same signal that is already registered.
r
f To prioritize the determination that it is the same signal that is already registered, set to the [WIDE] setting.
r
f Use in cases such as when the synchronizing frequency of a signal to be input has changed slightly
, or multiple signal lists are registered.
r
f Can only be used when a signal is input from the  terminal,  terminal,  terminal, or  terminal.
r
f When [WIDE] is set, the image may appear distorted because a signal is determined to be the same signal even if a synchronizing 
frequency changes slightly.
r
f When a signal to be input corresponds to the signal set in [WIDE], a registered signal with a high memory number receives priority
.
Example: A signal to be input that corresponds to memory numbers A2, A4 and B1 will be determined to be B1.
r
f When a registration signal is deleted, the settings are also deleted.
r
f In an environment where multiple types of signals are input to the same terminal, signals are sometimes not determined correctly when 
settings are set to [WIDE].
Managing the sub memory list
The projector has a sub memory function that can register the multiple i\
mage adjustment data, even if it is recognized as the same signal by 
the frequency or format of the synchronization signal source.
Use this function when you need to adjust the picture quality such as switching of the aspect ratio or white balance by the same 
synchronization signal source. The sub memory includes all the data that can be adjusted for each signa\
l, such as the screen aspect ratio and 
data adjusted in the [PICTURE] item ([CONTRAST], [BRIGHTNESS], etc.).  
						

							86 - ENGLISH
Chapter 4 Settings — [SIGNAL LIST] menu
To register the current settings to the list
1) Press qw on the normal screen (when the 
menu is not displayed).
r
f The sub memory registration screen is displayed if the sub 
memory is not registered. Proceed to Step 
3).
r
f A list of sub memories registered to the signal currently input is 
displayed.
r
f When [SUB MEMORY] is selected with [PROJECTOR SETUP]
 
→ [FUNCTION BUTTON] on the menu, the  
button can be used instead of  qw.
2) Press asqw
 to select the sub memory 
number to register in [SUB MEMORY LIST].
3) Press the  button.
r
f The 
[SIGNAL NAME CHANGE]  screen is displayed.
4) Press asqw to select [OK], and press the 
 button.
r
f To rename the registered data, follow the procedure in Steps 
4) 
and  5) in “Renaming the registered data” (
x page 84).
To switch to the sub memory list
1) Press qw on the normal screen (when the 
menu is not displayed).
r
f A list of sub memories registered to the signal currently input is 
displayed.
2) Press asqw
 to select the signal to switch in 
[SUB MEMORY LIST].
3) Press the  button.
r
f This switches to the signal selected in Step 
2).
To delete the sub memory data
1) Press qw on the normal screen (when the 
menu is not displayed).
r
f The 
[SUB MEMORY LIST]  screen is displayed.
2) Press asqw to select the sub memory to 
delete, and press the  button.
r
f The 
[ENTRY SIGNAL DELETE]  screen is displayed.
r
f To cancel the deletion, press the  button to return to 
the 
[SUB MEMORY LIST]  screen.
3) Press the  button.
r
f The selected sub memory will be deleted.  
						

							ENGLISH - 87
Chapter 4 Settings — [SECURITY] menu
[SECURITY] menu
Select [SECURITY] from the main menu, and select the item from the sub-m\
enu.
Refer to “Navigating through the menu” (
x page 49) for the operation of the menu screen.
r
f When the projector is used for the first time
Initial password: Press 
awsqawsq in order, and press the  button.
r
f After selecting the item, press 
asqw to set.
Attention
r
f When you select the [SECURITY] from the main menu and press the  button, entering a password is required. Enter the set 
password and then continue operations of the [SECURITY] menu.
r
f When the password has been changed previously, enter the changed password, and press the  button.
Note
r
f The entered password is displayed with * mark on the screen.
[SECURITY PASSWORD]
The 
[SECURITY PASSWORD ] screen is displayed when the power is turned on while the  switch is set to . When 
the entered password is incorrect, the operation will be restricted to the power standby < v> button, the  button, and the  
(, , and ) buttons.
1) Press as to select [SECURITY PASSWORD].2) Press qw to switch [SECURITY PASSWORD].
r
f The setting will change between [OFF] and [ON] each time you 
press the button.
r
r [SECURITY PASSWORD]
[OFF]
Disables the security password entry.
[ON] Enables the security password entry.
Note
r
f The [SECURITY PASSWORD] setting is set to [OFF] at the time of purchase or when all the user data has been initialized.
r
f Change the password periodically that is hard to guess.
r
f The security password will be enabled after setting [SECURITY PASSWORD] to [ON] and turning the  switch to .
[SECURITY PASSWORD CHANGE]
Change the security password.
1) Press as to select [SECURITY PASSWORD 
CHANGE].
2) Press the  button.
r
f The 
[SECURITY PASSWORD CHANGE]  screen is displayed.
3) Press asqw and the number ( to ) 
buttons to set the password.
r
f Up to eight button operations can be set.
4) Press the  button.
5) Re-enter the password for the confirmation.
6) Press the  button.
Note
r
f The entered password is displayed with * mark on the screen.
r
f If numbers have been used for the security password, the security password will need to be initialized again if the remote control is lost. 
Consult your dealer for the initialization method.
[DISPLAY SETTING]
Overlap the security message (text or image) over the projecting image.           
						

							88 - ENGLISH
Chapter 4 Settings — [SECURITY] menu
1) Press as to select [DISPLAY SETTING].2) Press qw to switch [DISPLAY SETTING].
r
f The setting will change among [OFF], [TEXT], and[USER 
LOGO] each time you press the button.
r
r [DISPLAY SETTING]
[OFF]
The text display is disabled.
[TEXT] The text display is enabled.
[USER LOGO] The picture registered by the user is projected.
Note
r
f To create the image for [USER LOGO], “Logo Transfer Software” included in the supplied CD-ROM is required.
[TEXT CHANGE]
Change the text displayed when the text display is enabled by selecting [TEXT] in [DISPLA
Y SETTING].
1) Press as to select [TEXT CHANGE].
2) Press the  button.
r
f The 
[TEXT CHANGE]  screen is displayed.
3) Press asqw to select the text, and press the 
 button to enter the text.
r
f Maximum 22 characters can be input.
4) Press asqw
 to select [OK], and press the 
 button.
r
f The text is changed.
[MENU LOCK]
Display the menu with the  button, and set whether to enable menu operations.
1) Press as to select [MENU LOCK].2) Press qw to switch [MENU LOCK].
r
f The setting will change between [OFF] and [ON] each time you 
press the button.
r
r [MENU LOCK]
[OFF]
Cancels the lock on menu operations.
[ON] Locks menu operations.
Note
r
f After setting [MENU LOCK] to [ON], if the wrong password is input, the  button cannot be operated.
r
f At the time of purchase or after [ALL USER DATA] initialization, [MENU LOCK] is set to [OFF].
r
f The lock release is maintained until the projector enters standby.
[MENU LOCK PASSWORD]
Change the menu lock password.
1) Press as to select [MENU LOCK 
PASSWORD].
2) Press the  button.
r
f The 
[MENU LOCK PASSWORD]  screen is displayed.
3) Press asqw to select the text, and press the 
 button to enter the text.
r
f Maximum 16 characters can be input.
4) Press asqw
 to select [OK] and press the 
 button.
r
f To cancel, select [CANCEL].
Attention
r
f The initial password when used for the first time or after initializing all the user data is “AAAA”.
r
f Change the password periodically that is hard to guess.
[CONTROL DEVICE SETUP]
Enable/disable the button operations on the control panel and the remote control.
1) Press as to select [CONTROL DEVICE 
SETUP].2) Press the  button.
r
f The 
[CONTROL DEVICE SETUP]  screen is displayed.  
						

							ENGLISH - 89
Chapter 4 Settings — [SECURITY] menu
3) Press as to select [CONTROL PANEL] or 
[REMOTE CONTROL].
4) Press the  button.
r
f The 
[CONTROL PANEL]  screen or the [REMOTE CONTROL]  
screen is displayed.
5) Press as to select an item, and press the 
 button.
6) When the confirmation is displayed, select [OK] 
or [CANCEL], and press the  button.
r
r [CONTROL PANEL] and [REMOTE CONTROL]
r
f You can set the limitation on the control from the control panel and 
remote control.
[ENABLE]
Enables all button operations on the projector body and remote control.
[DISABLE] Disables all button operations on the projector body and remote control.\
Note
r
f When a button operation is performed on the device set to [DISABLE], the 
[SECURITY PASSWORD] screen is displayed.
Enter the security password.
r
f The 
[SECURITY PASSWORD]  screen will disappear when the  button is pressed, or when there is no operation for approximately 
ten seconds.
r
f If the operations of both [CONTROL PANEL] and [REMOTE CONTROL] are set to [DISABLE], the projector cannot be turned off (cannot 
enter standby).
r
f When the setting has completed, the menu screen will disappear. To operate continuously, press the  button to display the main 
menu.  
						

							90 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
[NETWORK] menu
Select [NETWORK] from the main menu, and select the item from the sub-me\
nu.
Refer to “Navigating through the menu” (
x page 49) for the operation of the menu screen.
r
f After selecting the item, press 
asqw to set.
[NETWORK SETUP]
Perform the initial setting of the network before using the network function.
1) Press as to select [NETWORK SETUP].
2) Press the  button.
r
f The 
[NETWORK SETUP]  screen is displayed.
3) Press as to select an item, and change 
the settings according to the operation 
instructions of the menu.
4) Press as to select [STORE], and press the 
 button.
5) When the confirmation is displayed, select [OK] 
or [CANCEL], and press the  button.
r
r [NETWORK SETUP]
[PROJECTOR NAME]
Change the setting when using a DHCP server.
[DHCP] Set the item to [ON] when using a DHCP server to automatically acquire the IP address. Set to [OFF] when 
not using a DHCP server.
[IP ADDRESS] Enter the IP address when not using a DHCP server.
[SUBNET MASK] Enter the subnet mask when not using a DHCP server.
[DEFAULT GATEWAY] Enter the default gateway address when not using a DHCP server.
[STORE] Save the current network settings.
Note
r
f When using a DHCP server, confirm that the DHCP server is running.
r
f Consult your network administrator regarding the IP address, subnet mask, and default gateway.
[NETWORK CONTROL]
Set up the control method of the network.
1) Press as to select [NETWORK CONTROL].
2) Press the  button.
r
f The 
[NETWORK CONTROL]  screen is displayed.
3) Press as to select an item, then press  qw to 
change the setting.
4) Press as to select [STORE], and press the 
 button.
5) When the confirmation is displayed, select [OK] 
or [CANCEL], and press the  button.