Panasonic Digital Video Camera Recorder AG-DVX100P Operating Instructions

11
AGAIN switch
When the camera screen is too dark, change
the setting of this switch to boost the gain and
make the screen brighter.  The M and H gain
values are set using the MID GAIN item and
HIGH GAIN item on the setting menu SW
MODE screen.  (See page 40)
L:The switch is normally kept at this
position.  (0 dB)
M:The gain of the camera video amplifier is
boosted.  (Factory setting: 6 dB)
H:The gain of the camera video amplifier is
further boosted.  (Factory setting: 12 dB)
OIn the progressive mode,...

12
Parts and their functions
CAWB button
When this button is pressed while the WHITE
BAL switch Bis set to the A or B position,
the white balance is automatically adjusted,
and the white balance value is stored in the
memory.
If this button is then held down, the black
balance is adjusted.
In the progressive mode, the black balance is
adjusted following the automatic adjustment
of the white balance simply by pressing this
button.
When this button is pressed while the WHITE
BAL switch Bis set to the PRST...

13
Parts and their functions
JINDEX button
When the INDEX button is pressed while
shooting or recording is in progress, the index
signal is recorded on the tape.
When it is pressed while shooting or
recording has been temporarily stopped, the
recording of the index signal is set to standby.
If shooting or recording is commenced in this
status, the index signal will then be recorded
on the tape.
By recording the index signal, searches
(index searches) can be conducted during
playback.  (See page 59)
KAUTO...

14
[In the camera mode]
“5” 
When the lever is tilted in the “5”
direction in the shooting pause mode, the
tape is played back in the “5” direction
at 1aspeed while the lever is tilted.
“6” 
When the lever is tilted in the “6”
direction in the shooting pause mode, the
tape is played back in the “6” direction
at 1aspeed while the lever is tilted.
OThe scenes shot up until now can be
checked in the shooting pause mode.
VS-VIDEO IN/OUT connector
This is the S-video input/output connector.
WAUDIO IN/OUT CH1...

\ZOOM switch
This is used to select motor-driven zoom
operations or manual zoom operations.
SERVO:
For motor-driven zoom operations
(At this position, do not attempt to perform
manual zoom operations or malfunctioning
may result.)
MANU:
For manual zoom operations
]START/STOP button (on the handle)
When this button is pressed in the camera
mode, shooting start or stop is selected.
The camera mode and VCR mode are
switched using the CAMERA/VCR button >.
^REC CHECK button
When this button is pressed in the...

16
Parts and their functions
eOPEN button
Press the OPEN button in the direction of the
arrow to open the LCD monitor f.
When the LCD monitor is opened, the image
on the viewfinder switches to the LCD
monitor.
The image can be switched using the EVF
MODE item on the setting menu DISPLAY
SETUP screen.  (See page 45)jSPEED SEL button
After having pressed the SHUTTER button
i, press this button to select the shutter
speed.  (See page 29)
kCH1 SELECT switch
This switch is used to select the input signals...

oCOUNTER RESET button
This button is used to reset the counter value
on the counter display and the memory
counter value to zero.
It cannot reset the time code or user’s bit.
pCOUNTER button
This button is used to select what data is to
be displayed on the counter display which is
in the viewfinder and on the LCD monitor.  
Each time it is pressed, the data to be
displayed changes.
COUNTER:
The counter value is displayed.
M COUNTER:
The counter value in the memory stop
mode is displayed.
TC :The time...

Remote control unit
1OSD button
When this button is pressed, the information
displayed in the viewfinder and on the LCD
monitor is added to the video signals, and it
can be displayed on a TV monitor as well.
When it is pressed again, the display on the
TV monitor is cleared.
2DATE/TIME button
When this button is pressed, the shooting
date (year/month/day) and/or time are
displayed in the viewfinder and on the LCD
monitor.
Each time it is pressed, the display is
switched in the sequence shown below....

19
Parts and their functions
:VAR. SEARCH button
When this button is pressed during playback,
the variable search mode is established, and
“1a” is displayed in the viewfinder and on the
LCD monitor.  When the “V” or “B” button
among the SET buttons ;is pressed, the
playback speed is changed.
Each time the “V” or “B” button is pressed,
the playback speed is changed by one setting
in the following sequence: 1/5a(or 1/3ain
the LP mode), 1a, 2a, 5a, 10aand 20a.
Use the “V” button to change the speed in
the...

20
Remote control unit
Remote control unit settings
In order to prevent mistakes made in operations
performed using remote control when two
camera recorders are operated at the same
time, the operation buttons on the camera
recorder and accessory wireless remote control
unit can be set to work for “VCR1” applications
and for “VCR2” applications.
Setting method
OWireless remote control unit
When the STOP ($) and STILL ADV (D)
buttons among the VCR operation buttons
are pressed at the same time, the...