Home
>
Panasonic
>
Digital Camcorder
>
Panasonic Digital Video Camcorder PV-GS300 Operating Instructions
Panasonic Digital Video Camcorder PV-GS300 Operating Instructions
Here you can view all the pages of manual Panasonic Digital Video Camcorder PV-GS300 Operating Instructions. The Panasonic manuals for Digital Camcorder are available online for free. You can easily download all the documents as PDF.
Page 11
Before using 11LSQT0974 ªHow to turn off the power 1While pressing the button 1, set the [OFF/ ON] switch to [OFF]. ª Recording on a tape≥Set to Tape Recording Mode. 1Press the recording start/stop button to start recording. 2Press the recording start/stop button again to pause recording. ª Recording still pictures onto a card (Photoshot) ≥Set to Card Recording Mode. 1Press the [PHOTO SHOT] button ª Playing back tape≥Set to Tape Playback Mode. 1Operate with joystick. 1/;: Playback/Pause 6:...
Page 12
Before using 12LSQT0974 Before using Accessories The following are the accessories supplied with this product. 1) AC adaptor, DC Cable, AC Cable -15-2) Battery pack -15- 3) Remote control, button-type battery -26-4) Multi cable -48-5) Shoulder strap -14-6) USB cable and CD-ROM -51- Parts identification and handling ªCamcorder (1)Built-in flash -36- (2)White balance sensor -40-Remote control sensor -27- (3)Recording lamp -65- (4)Grip belt (One-touch free-style grip belt) -14- (5)Lens (LEICA DICOMAR)...
Page 13
Before using 13LSQT0974 (11)Viewfinder -18-,-75- (12) Battery holder(13)Battery release lever [BATT] -15- (14)Power switch [OFF/ON] -16- (15)Status indicator -16- (16)Menu button [MENU] -24- (17)Joystick -22- (18)Mode dial -21- (19)Recording start/stop button -29- (20) LCD monitor -18-,-75- (21)LCD monitor open part [OPEN] -18- (22)Mode select switch [AUTO/MANUAL/ FOCUS] -28-,-39-,-42- (23)Power LCD button [POWER LCD] -25-(24) USB terminal [ ] -51- (25)DV input/output terminal [DV] -49- (26)Reset button...
Page 14
Before using 14LSQT0974 (37)Shoulder strap fixture This is a fixture for attaching the shoulder strap to hang the Camcorder from your neck or shoulder. ≥Put the strap through the fixture 1 and through the stopper 2 so it will not come off. Extend part 3 by at least 2 cm (1 inch). ≥Fit the other end of the belt similarly. (38)Lens hood In order to remove the lens hood, rotate it counter-clockwise 1. In order to fit it, place into slot 2, and then rotate it clockwise. ≥The lens hood has a built-in...
Page 15
Before using 15LSQT0974 Power supply ªCharging the batteryWhen this product is purchased, the battery is not charged. Charge the battery before using this product. ≥Battery charging time ( -16-) ≥We recommend using Panasonic batteries. ≥If you use other batteries, we cannot guarantee the quality of this product. ≥If the DC Cable is connected to the AC adaptor, then the battery will not get charged. Remove the DC Cable from the AC adaptor. 1Connect the AC Cable to the AC adaptor and the AC Jack....
Page 16
Before using 16LSQT0974 Charging time and recordable time The times shown in the tables below are for when the temperature is 25oC (77oF) and the humidity is 60%. If the temperature is higher or lower than 25oC (77oF), the charging time will become longer. ACharging time BMaximum continuously recordable time “1 h 10 min” indicates 1 hour 10 minutes. ≥The battery CGA-DU12 is supplied. ≥The charging time and recordable time shown in the table are approximations. The times indicate the recordable time...
Page 17
Before using 17LSQT0974 ªHow to turn the power on and off with the LCD monitor/viewfinder When the power switch is set to [ON], the power can be turned on and off with the LCD monitor and the viewfinder when the unit is in Tape Recording Mode or Card Recording Mode. 1Open the LCD monitor out or extend the viewfinder to use. (-18-) ≥The LCD monitor or viewfinder will be activated. 2Close the LCD monitor and retract the viewfinder. ≥The power will not turn off unless the LCD monitor is closed and...
Page 18
Before using 18LSQT0974 Using the LCD monitor You can record the image while viewing it on the opened LCD monitor. 1Place your finger on OPEN and pull the LCD monitor out in the direction of the arrow. ≥It can open up to 90o. 2Adjust the angle of the LCD monitor according to your preference. ≥It can rotate up to 180o 1 towards the lens or 90o 2 towards the viewfinder. ≥The brightness and color level of the LCD monitor can be adjusted from the menu. ≥If it is forcibly opened or rotated, the Camcorder...
Page 19
Before using 19LSQT0974 Quick Start When Quick Start is ON the battery power is still being consumed, even when the LCD Monitor and the Viewfinder are closed. The Camcorder will resume recording/pause mode about 1.7 seconds after the LCD Monitor and the Viewfinder are reopened. ≥Please note in Quick Start Mode approximately half the pause recording power is being consumed. Using Quick Start Mode will reduce the battery recording/playback time. ≥This is only activated in the following cases. ≥A...
Page 20
Before using 20LSQT0974 Inserting/removing a cassette 1Fit the AC adaptor or the battery and turn on the power. 2Slide the [OPEN/EJECT] lever and open the cassette cover. ≥When the cover is fully opened, the cassette holder will come out. 3After the cassette holder is opened, insert/ remove the cassette. ≥When inserting a cassette, orient it as shown in the figure, and then securely insert it as far as it goes. ≥When removing, pull it straight out. 4Push the [PUSH] mark 1 in order to close the...