Panasonic Digital Progressive Plasma Television Th 37pd25 Operating Instructions

11
Cable Connection
13
2
S-VIDEOPC CHANNEL VOLUMEMENU OKHPJVIDEOVIDEO3L   AUDIO   R
HPJS VIDEO VIDEO
INPUT 3
L   AUDIO   R
PROG OUTCOMPONENT VIDEO INPUT
S VIDEO
VIDEOY
P
B
L
RP
R
1212INPUT
TO AUDIO
AMPL
RAUDIO INAV IN
VIDEOHDmI
BAANTENNA SERVICE ONLY DIGITAL AUDIO
OUTCABLE CARDCable In
Headphones /
Earphones jack
(see page 17)
Front AV  terminals
(see page 17)
From EXTERNAL monitor terminal
on Computer  (see page 18)
CableCARD slot
(see page 13)
DIGITAL AUDIO OUT terminal
(see page 16)
Antenna terminals...

12
B        ANTENNA        ACable   In
Notes:
•Certain cable systems offset some channels to reduce interference or have Premium (scrambled) channels. A cable
converter box is required for proper reception. Check with your local cable company for its compatibility requirements.
•To obtain optimum quality picture and sound, an antenna, the correct cable (75 Ohm coaxial) and the correct terminating
plug are required.
•If a communal antenna system is used, you may require the correct connection cable and...

13
Cable Connection
ANT OUTPUT
ANT INPUT
B         ANTENNA       ACable   In
Cable Box Connection
Back of the TV
CABLE BOX
Incoming cable
Ferrite core (large size)
(supplied) •When you enjoy the cable TV programs only, connect the cable TV’s cable to ANTENNA (A). When you enjoy both the
terrestrial TV programs and the cable TV programs, connect the cable TV’s cable to ANTENNA (A), and the terrestrial
antenna cable to ANTENNA (B).
•Select the antenna mode in Input Setup (see page 22).
Less than
4” (10...

14
AV  I N
L
RA
UDIO IN
HDMI Connection
HDMI∗1 (High Definition Multi media Interface) is the first all digital consumer electronics A/V interface that supports
uncompressed standard. The HDMI terminal supports both video and audio information.
To the HDMI∗
1 input terminal, you can connect an EIA/CEA-861/861B∗2 compliant consumer electronic device, such as
a Set Top Box or DVD player with HDMI or DVI output terminal.
Input a High-bandwidth Digital Content Protection (HDCP) high-definition picture source...

15
Cable Connection
This TV is capable of displaying 1080i and 480p DTV signals when connected to a DTV Tuner Set-Top-Box (STB). This
TV also utilizes a progressive scan doubler, which de-interlaces the NTSC signal and progressively scans the image.
•To view DTV programs, connect the STB to the component video input terminals (Y, P
B, PR) of the TV. Component color
inputs provide luminance and separate color signal.
•Select the output of the STB to either 1080i or 480p.
•A DTV signal must be available in...

16
PROG OUTCOMPONENT VIDEO INPUT
S VIDEO
VIDEOY
P
B
L
RP
R
1212INPUT
VIDEO
TO AUDIO
AMP
VIDEO
AUDIO
RL
See optional equipment manual for further instructions for recording and monitoring.
Program Out Connection (PROG OUT)
VCR MONITORVideo cable
Audio cableBack of the TV
OR
Cable Connection
PROG OUTCOMPONENT VIDEO INPUT
S VIDEO
VIDEOY
P
B
L
RP
R
1212INPUT
VIDEO
TO AUDIO
AMP
AUDIO INPUTOPTICAL IN
RLDIGITAL AUDIO
OUT
Notes:
• External speakers cannot be connected directly to TO AUDIO AMP terminals.
• When...

17
Cable Connection
PC HPJS VIDEO VIDEO
INPUT 3
L   AUDIO   R
M3 plug
Headphones /
Earphones
(not supplied)
Connecting Headphones / Earphones
Ferrite core (small size)
(supplied)
PC S VIDEO VIDEO
INPUT 3
L   AUDIO   R
Push to open the front panel and connect equipment to front Audio/Video input terminals.
Connecting to the front AV terminals
A second VCR, video disc player, video game equipment and DSS equipment can also be connected to the video input
terminals. See the optional equipment manual for...

18
Cable Connection
PC Input Terminals Connection
Notes:
(1) Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical
scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200
lines.)
(2) The display resolution is a maximum of 640 × 
480 dots when the aspect mode is set to “4:3”, and 852 × 
480 dots when
the aspect mode is set to “16:9”. If the display resolution exceeds these maximums, it may...

19
POWERPOWER button
Power ON / OFF
Connect the AC cord plug to the Plasma TV.
• Fix the power cord plug securely with the clamper
(see page 11).
2    Connect the plug to the wall outlet. Remote control senser
Power indicater
Power on: Red
Power off: No LightPress to turn the TV on or off.
TVVCRDVD
DBSRCVRCBL
LIGHT
TV/VIDEOA -ANTENNA - B
SAP
AUX
ASPECT
R
BBE
POWERNote:
The TV will still consume some power as long as the
power cord is inserted into the wall outlet.
1
3
The Main Unit
S-VIDEOPC CHANNEL...

20
TV
POWER
MENU
R-TUNE
PIP MIN
REWPIP MAX
FF
PLAYPROG
EXIT
VCRDVD
DBSRCVRCBL
LIGHT
TV/VIDEOA -ANTENNA - B
SAP
123
456
78
0
9
AUX
ASPECT
MUTERECALL
BBE
STOPPA U S E
FREEZE
TV/VCR
PIP SPLIT MOVE
SWAP
SEARCHOPEN/CLOSEPIP CH
DVD/VCR CH
REC
CH
VOL
CHVOL
OK
The Illuminated Remote Control
COMPONENT 2HDMI TV
COMPONENT 1
VIDEO 3 PC VIDEO 1VIDEO 2
POWER
Turn the TV ON or OFF.
TV/VIDEO
Change the input mode.
SD
Access Photo Viewer (see page 48).
R-TUNE
Switch to previously viewed channel and input modes.
Mode...