Home
>
Panasonic
>
Television
>
Panasonic Digital High Definition Plasma Television Th 37px60 Operating Instructions
Panasonic Digital High Definition Plasma Television Th 37px60 Operating Instructions
Have a look at the manual Panasonic Digital High Definition Plasma Television Th 37px60 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 14
1415
Viewing Watching TVViewing
-
15-2
ABC - HD - 10:30
Andrew’ s cooking show 1080I TV-G
Standard
4 : 3
10:00 am
30
CCSAP
Setting 1/3
[1]
[2]
[3]
[4]
[5]Setting 1/3
[1] 26-1
[2]
[3]
[4]
[5]
Favorite 1/3
[1]
[2]
[3]
[4]
[5]
3
1Display the channel to be placed on the Favorites list.2 Hold down FAVORITE for several
seconds.
• Press FAVORITE repeatedly
to change between pages (1/3,
2/3, 3/3, or exit). Pressing {y
also changes the page.3 Press xzto highlight a position
on the list.
Then,...](http://img.usermanuals.tech/thumb/58/71556/w64_th-37px60_en_om_d-13.png "Page 14
1415
Viewing Watching TVViewing
-
15-2
ABC - HD - 10:30
Andrew’ s cooking show 1080I TV-G
Standard
4 : 3
10:00 am
30
CCSAP
Setting 1/3
[1]
[2]
[3]
[4]
[5]Setting 1/3
[1] 26-1
[2]
[3]
[4]
[5]
Favorite 1/3
[1]
[2]
[3]
[4]
[5]
3
1Display the channel to be placed on the Favorites list.2 Hold down FAVORITE for several
seconds.
• Press FAVORITE repeatedly
to change between pages (1/3,
2/3, 3/3, or exit). Pressing {y
also changes the page.3 Press xzto highlight a position
on the list.
Then,...")
![Page 15
1415
Viewing Watching TVViewing
-
15-2
ABC - HD - 10:30
Andrew’ s cooking show 1080I TV-G
Standard
4 : 3
10:00 am
30
CCSAP
Setting 1/3
[1]
[2]
[3]
[4]
[5]Setting 1/3
[1] 26-1
[2]
[3]
[4]
[5]
Favorite 1/3
[1]
[2]
[3]
[4]
[5]
3
1Display the channel to be placed on the Favorites list.2 Hold down FAVORITE for several
seconds.
• Press FAVORITE repeatedly
to change between pages (1/3,
2/3, 3/3, or exit). Pressing {y
also changes the page.3 Press xzto highlight a position
on the list.
Then,...](http://img.usermanuals.tech/thumb/58/71556/w64_th-37px60_en_om_d-14.png "Page 15
1415
Viewing Watching TVViewing
-
15-2
ABC - HD - 10:30
Andrew’ s cooking show 1080I TV-G
Standard
4 : 3
10:00 am
30
CCSAP
Setting 1/3
[1]
[2]
[3]
[4]
[5]Setting 1/3
[1] 26-1
[2]
[3]
[4]
[5]
Favorite 1/3
[1]
[2]
[3]
[4]
[5]
3
1Display the channel to be placed on the Favorites list.2 Hold down FAVORITE for several
seconds.
• Press FAVORITE repeatedly
to change between pages (1/3,
2/3, 3/3, or exit). Pressing {y
also changes the page.3 Press xzto highlight a position
on the list.
Then,...")
1011 Quick Start Guide Connection IN OUT ANT IN ANT OUT S-Video OUT Video OUT Audio OUTL R Video IN Audio INL R Snap open Snap shutBack of the TV unit •Do not bundle the RF cable and AC cord together (could cause distorted image).•Fix cables with Cable clampers as necessary.•When using the optional accessory, follow the option’s assembly manual to fix cables. Remove from the TV unit Push both side hooks and pull out Cable clamperAC cord •Bundle cables with the Cable clamper on the left side.•Fasten the AC cord with the Cable clamper on the right side. Bind all cables to the plasma television with the Cable clamper. Cable Binding Instructions vAttaching the Cable clampersvCable Binding Instructions ConnectionvWatching TV Back of the unit Cable BOX S-Video signals have priority. orVHF/UHF aerial DVD Recorder / VCR Fastener•To unfasten AC cord (Connect after all the other connections.) Note •All cables and external equipment shown in this book are not supplied with the TV. •For additional assistance, visit us at : www.panasonic.com www.panasonic.ca•The S Video input will override the composite video signal when S Video cable is connected. Connect either S Video cable or Video cable.•When receiving digital channel signals, all digital formats are down-converted to composite NTSC video to be output through the PROG.OUT terminals.•Some programs contain a copyright protection signal to prevent VCR recording.•Set the TV channel to CH3 or CH4 for using Cable Box Connection. Video recorder with TV Tuner To record TV shows or
1213 Quick Start Guide First Time Setup Identifying Controls First time setup Language Clock Auto program - Language Language English First time setup Language Clock Auto program Clock Date Time 4 / 1 / 2006 9 : 43 AM First time setup Language ClockAuto program Now scanning analog channel ... ProgressAuto program ANT In Mode Start scan All Cable Auto program ANT In Mode Start scan All CableEdit - - - 2 FavoriteApply No Ye s Add -- vPress to exit Turn the TV On with the POWER button 1First Time Setup Select your language 2 Adjust the clock 3 next select “Clock” English Español FrançaisDate: Adjust the date (Press and hold to change the month.) Time: Adjust the time (If the button is held, the speed of change increases.) next select Note •To change setting later, go to Menu screen (p. 20) set select item ANT In Cable: Cable TV Antenna: AntennaMode All: digital and analog Analog: analog only (Reduces time for scanning)Auto channel setup 4 set select start select “Start scan” select “Apply” ok Start scanning the channels Select “Auto program” Select antenna and input modes Confirm registered channels •Available channels (analog/digital) are automatically set. vPress to return to previous screen “First time setup” is displayed only when the TV is turned on for the first time after the AC cord is inserted into a wall outlet. Available only when “Auto power on” (p. 20) is set to “Off”. next select Press to go to previous screen. Or, select icon, then press OK for same results. •About broadcasting systems Analog: traditional TV system Digital : new system that allows you to view more channels featuring high-quality video and sound•If OK is not pressed after selecting “Apply”, the channels will not be memorized. Identifying Controls Switches TV/VIDEO Volume POWER buttonSwing up the door at “PULL”. Remote control sensorSelects channels in sequenceSD CARD slot (p. 17) Switches TV to On or Standby Sets the remote to communicate with other equipment (p. 33) Changes input signal (p. 19) Display Main Menu (p. 20) Sound mute On/Off Changes aspect ratio (p. 15) Switch to previously viewed channel and input modes. Selects channels in sequence Sleep Timer (p. 14, 32) Power indicator (on: red, off: no light) Viewing from SD Card (p. 16) SAP (p. 14) Exit menus Select/OK/Change RETURN (to previous menu) Display or remove the channel banner (p. 14) Operate the Favorite channel list function. (p. 15) Numeric keypad to select any channel or press to enter alphanumeric input in menus. (p. 14) Direct channel access for DTV and DBS (p. 14) Volume External equipment operations (p. 19, 36) (VCRs, DVDs, etc.)
1213 Quick Start Guide First Time Setup Identifying Controls First time setup Language Clock Auto program - Language Language English First time setup Language Clock Auto program Clock Date Time 4 / 1 / 2006 9 : 43 AM First time setup Language ClockAuto program Now scanning analog channel ... ProgressAuto program ANT In Mode Start scan All Cable Auto program ANT In Mode Start scan All CableEdit - - - 2 FavoriteApply No Ye s Add -- vPress to exit Turn the TV On with the POWER button 1First Time Setup Select your language 2 Adjust the clock 3 next select “Clock” English Español FrançaisDate: Adjust the date (Press and hold to change the month.) Time: Adjust the time (If the button is held, the speed of change increases.) next select Note •To change setting later, go to Menu screen (p. 20) set select item ANT In Cable: Cable TV Antenna: AntennaMode All: digital and analog Analog: analog only (Reduces time for scanning)Auto channel setup 4 set select start select “Start scan” select “Apply” ok Start scanning the channels Select “Auto program” Select antenna and input modes Confirm registered channels •Available channels (analog/digital) are automatically set. vPress to return to previous screen “First time setup” is displayed only when the TV is turned on for the first time after the AC cord is inserted into a wall outlet. Available only when “Auto power on” (p. 20) is set to “Off”. next select Press to go to previous screen. Or, select icon, then press OK for same results. •About broadcasting systems Analog: traditional TV system Digital : new system that allows you to view more channels featuring high-quality video and sound•If OK is not pressed after selecting “Apply”, the channels will not be memorized. Identifying Controls Switches TV/VIDEO Volume POWER buttonSwing up the door at “PULL”. Remote control sensorSelects channels in sequenceSD CARD slot (p. 17) Switches TV to On or Standby Sets the remote to communicate with other equipment (p. 33) Changes input signal (p. 19) Display Main Menu (p. 20) Sound mute On/Off Changes aspect ratio (p. 15) Switch to previously viewed channel and input modes. Selects channels in sequence Sleep Timer (p. 14, 32) Power indicator (on: red, off: no light) Viewing from SD Card (p. 16) SAP (p. 14) Exit menus Select/OK/Change RETURN (to previous menu) Display or remove the channel banner (p. 14) Operate the Favorite channel list function. (p. 15) Numeric keypad to select any channel or press to enter alphanumeric input in menus. (p. 14) Direct channel access for DTV and DBS (p. 14) Volume External equipment operations (p. 19, 36) (VCRs, DVDs, etc.)
1415
Viewing Watching TVViewing
-
15-2
ABC - HD - 10:30
Andrew’ s cooking show 1080I TV-G
Standard
4 : 3
10:00 am
30
CCSAP
Setting 1/3
[1]
[2]
[3]
[4]
[5]Setting 1/3
[1] 26-1
[2]
[3]
[4]
[5]
Favorite 1/3
[1]
[2]
[3]
[4]
[5]
3
1Display the channel to be placed on the Favorites list.2 Hold down FAVORITE for several
seconds.
• Press FAVORITE repeatedly
to change between pages (1/3,
2/3, 3/3, or exit). Pressing {y
also changes the page.3 Press xzto highlight a position
on the list.
Then, press OK to memorize the
displayed CH in that position.
• You can also use the NUMBER
keys (1-9 and 0) to select the
recorded list numbers (1-9 and
0). By doing so, the numbers
will be directly recorded without
having to press the OK key.• To delete a favorite channel A memorized channel can be removed from the list by
holding down FAVORITE while its position is highlighted.
Watching TV
Switch to TV mode
12
up
down
or
Connect cable Box when watching cable TV. (p. 10)
Select a channel number
Caution
•ATSC broadcasts cannot be received in countries other than the USA, Canada, and Mexico.
vTo directly input the digital channel
number
-
example: CH15-1:
-
Turn power on
•POWER button on
unit should be On.
Rating LevelPicture
mode Signal
resolution
vOther Useful Functions
(Operate after
)
•0/30/60/90 (minutes)
•Each press changes the mode.•480i (4:3), 480i (16:9), 480p (4:3), 480p (16:9) :
FULL, JUST, 4:3 or ZOOM•1080p / 1080i / 720p : FULL, H-FILL, JUST, 4:3 or
ZOOM.
Change the aspect
(p. 40)
vFAVORITE Channel numbers registered in Favorite are displayed on the favorite
tune screen. Select the desired broadcast station with the cursor, or using
number keys. (see below)
Switches the unit OFF in a preset amount of time from 0 to 90 minutes in 30
minute intervals.
Display or remove the channel banner.vSelect Audio Mode for TV Viewing•Digital mode
Press SAP to select the next audio track (if available) when receiving a digital channel.Audio Track 1 of 1
(English)•Analog mode
Press SAP to select the desired audio mode.
• Each press of SAP will change the audio mode. (Stereo/SAP/Mono)
Channel Ending time Show title
Station
identifierSAP
Aspect ratioSleep timer
remaining timeClock
Sleep
Timer
Listen
with SAP(Secondary
Audio
Program)Information
Recall
Change
aspect
ratio
Call up
a favorite
channel
Set Favorite Feature
Use Favorite Feature
select ok
1 Press FAVORITE.
• Press FAVORITE repeatedly
to change between pages (1/3,
2/3, 3/3, or exit). Pressing {y
also changes the page.2 Press xz or a Numbered key
(1-9 and 0) to highlight a channel
on the list.
• Selecting a channel number
from the list with the Number
keys will display the channel
directly.3 Press OK to display the
highlighted channel. select
ok
•When tuning digital channel,
press the button to enter the
minor number in a compound
channel number.
Note
•Reselect “Cable” or “Antenna” in “ANT In” of “Auto program” to switch the signal reception between cable TV and
antenna. (p. 13)•The channel number and volume level remain the same even after the TV is turned off.
1415
Viewing Watching TVViewing
-
15-2
ABC - HD - 10:30
Andrew’ s cooking show 1080I TV-G
Standard
4 : 3
10:00 am
30
CCSAP
Setting 1/3
[1]
[2]
[3]
[4]
[5]Setting 1/3
[1] 26-1
[2]
[3]
[4]
[5]
Favorite 1/3
[1]
[2]
[3]
[4]
[5]
3
1Display the channel to be placed on the Favorites list.2 Hold down FAVORITE for several
seconds.
• Press FAVORITE repeatedly
to change between pages (1/3,
2/3, 3/3, or exit). Pressing {y
also changes the page.3 Press xzto highlight a position
on the list.
Then, press OK to memorize the
displayed CH in that position.
• You can also use the NUMBER
keys (1-9 and 0) to select the
recorded list numbers (1-9 and
0). By doing so, the numbers
will be directly recorded without
having to press the OK key.• To delete a favorite channel A memorized channel can be removed from the list by
holding down FAVORITE while its position is highlighted.
Watching TV
Switch to TV mode
12
up
down
or
Connect cable Box when watching cable TV. (p. 10)
Select a channel number
Caution
•ATSC broadcasts cannot be received in countries other than the USA, Canada, and Mexico.
vTo directly input the digital channel
number
-
example: CH15-1:
-
Turn power on
•POWER button on
unit should be On.
Rating LevelPicture
mode Signal
resolution
vOther Useful Functions
(Operate after
)
•0/30/60/90 (minutes)
•Each press changes the mode.•480i (4:3), 480i (16:9), 480p (4:3), 480p (16:9) :
FULL, JUST, 4:3 or ZOOM•1080p / 1080i / 720p : FULL, H-FILL, JUST, 4:3 or
ZOOM.
Change the aspect
(p. 40)
vFAVORITE Channel numbers registered in Favorite are displayed on the favorite
tune screen. Select the desired broadcast station with the cursor, or using
number keys. (see below)
Switches the unit OFF in a preset amount of time from 0 to 90 minutes in 30
minute intervals.
Display or remove the channel banner.vSelect Audio Mode for TV Viewing•Digital mode
Press SAP to select the next audio track (if available) when receiving a digital channel.Audio Track 1 of 1
(English)•Analog mode
Press SAP to select the desired audio mode.
• Each press of SAP will change the audio mode. (Stereo/SAP/Mono)
Channel Ending time Show title
Station
identifierSAP
Aspect ratioSleep timer
remaining timeClock
Sleep
Timer
Listen
with SAP(Secondary
Audio
Program)Information
Recall
Change
aspect
ratio
Call up
a favorite
channel
Set Favorite Feature
Use Favorite Feature
select ok
1 Press FAVORITE.
• Press FAVORITE repeatedly
to change between pages (1/3,
2/3, 3/3, or exit). Pressing {y
also changes the page.2 Press xz or a Numbered key
(1-9 and 0) to highlight a channel
on the list.
• Selecting a channel number
from the list with the Number
keys will display the channel
directly.3 Press OK to display the
highlighted channel. select
ok
•When tuning digital channel,
press the button to enter the
minor number in a compound
channel number.
Note
•Reselect “Cable” or “Antenna” in “ANT In” of “Auto program” to switch the signal reception between cable TV and
antenna. (p. 13)•The channel number and volume level remain the same even after the TV is turned off.
1617 Viewing Viewing from SD Card - Accessing No Standard +30 0 0 0 +10 Picture 1/2 Normal Pic. mode Picture Brightness Color Tint Sharpness •To display/hide Navigation Area To previous photo Rotate 90 degree (clockwise) To next photo Rotate 90 degree (counter-clockwise) Viewing from SD CardYou can view photos taken with a digital camera or a digital video camera saved on SD card. (Media other than SD Cards may not be reproduced properly.) View 4 Select the data to be viewed 3 While reading the data 12 Select the SD mode select view Thumbnail view Navigation Area Selected picture information is displayed. No. : Image number or file name is displayed. Date : Date of recording is displayed. Pixel : Display resolution is displayed. Insert the SD Card•For cautions and details on SD Cards (p. 18 and 41)Displayed one at a time Navigation Area vPress to return to TVvPress to exitvPress to return to the previous screen Note •This SD modes selection are able to operate from MENU screen.Total number of images Note •Depending on the JPEG type, Info contents may not be displayed correctly. vTo adjust picture Adjust SD CardIn select set Start slide show select ok Picture menu (p. 20) •Remove the card Press in lightly on SD Card, then release. Label surface Push until a click is heard •Compliant card type (maximum capacity): SD Card (2 GB), Mini SD Card (1 GB) (requiring mini SD Card adapter) To change the view (slide show, adjusting images, etc.) vTo watch photos in slide show In ok•Insert the card When MENU is pressed, the Picture Adjust menu is displayed. (p. 20) ModeSet to Single/Slide to view single images or perform a slide show. Disp timeYou can set how many seconds each image is displayed in Slide mode. Repeat Turn the slide show Repeat function On or Off.Note •For large image sizes, the display time will be longer than the number of seconds set.•To stop in mid-cycle Press “OK” button •To display/hide Navigation Area
1617 Viewing Viewing from SD Card - Accessing No Standard +30 0 0 0 +10 Picture 1/2 Normal Pic. mode Picture Brightness Color Tint Sharpness •To display/hide Navigation Area To previous photo Rotate 90 degree (clockwise) To next photo Rotate 90 degree (counter-clockwise) Viewing from SD CardYou can view photos taken with a digital camera or a digital video camera saved on SD card. (Media other than SD Cards may not be reproduced properly.) View 4 Select the data to be viewed 3 While reading the data 12 Select the SD mode select view Thumbnail view Navigation Area Selected picture information is displayed. No. : Image number or file name is displayed. Date : Date of recording is displayed. Pixel : Display resolution is displayed. Insert the SD Card•For cautions and details on SD Cards (p. 18 and 41)Displayed one at a time Navigation Area vPress to return to TVvPress to exitvPress to return to the previous screen Note •This SD modes selection are able to operate from MENU screen.Total number of images Note •Depending on the JPEG type, Info contents may not be displayed correctly. vTo adjust picture Adjust SD CardIn select set Start slide show select ok Picture menu (p. 20) •Remove the card Press in lightly on SD Card, then release. Label surface Push until a click is heard •Compliant card type (maximum capacity): SD Card (2 GB), Mini SD Card (1 GB) (requiring mini SD Card adapter) To change the view (slide show, adjusting images, etc.) vTo watch photos in slide show In ok•Insert the card When MENU is pressed, the Picture Adjust menu is displayed. (p. 20) ModeSet to Single/Slide to view single images or perform a slide show. Disp timeYou can set how many seconds each image is displayed in Slide mode. Repeat Turn the slide show Repeat function On or Off.Note •For large image sizes, the display time will be longer than the number of seconds set.•To stop in mid-cycle Press “OK” button •To display/hide Navigation Area
1819 Viewing Watching Videos and DVDs Cards: Notes and Cautions VCR DVD VCR Record Record- Open/Close - Skip Reverse/Forward Rewind/Fast Forward Reverse/ForwardStop StopPause PausePlay Play - Input select [1] TV [2] Component 1 [3] Component 2 [4] HDMI 1 [5] HDMI 2 [6] Video 1 [7] Video 2 [8] Video 3 Video 1 VCR Press corresponding NUMBER key on the Remote Control to select the input of your choice. Press to select the input of your choice, then press “OK”.•If during selection, no action is taken for several seconds, the Input selection menu is exited. SD Card: Notes and Cautions Message Meaning Card Warning MessagesCautions in handling card : Is memory card in? •The card is not inserted or this unit does not support the format. •Do not remove the card while the unit is accessing data (this can damage card or unit).•Do not touch the terminals on the back of the card.•Do not subject the card to a high pressure or impact.•Insert the card in the correct direction (otherwise, card may be damaged).•Electrical interference, static electricity, or erroneous operation may damage the data or card.•Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the unit. (Panasonic is not liable for any deterioration or damage of recorded data.)No file •The card has no data or this type of data is not supported. Watching Videos and DVDsSome Panasonic equipment connected to the TV unit can be operated with the remote control. Programming the remote control is necessary to operate other manufacturers’ products. (p. 33) 3 With VCR or DVD turned OnSwitch to external inputPress to display the Input select menu. 12 Select the input mode or select enter (example) Operatethe VCR or DVD with the remote control Note •For details, see the manual of the equipment or ask your local dealer. •The terminal and label of the connected device is indicated. To label each of the connected devices (p. 30) (For other operations, see p. 36.) vPress to return to TV (Initial screen) Label Terminal [example]
1819 Viewing Watching Videos and DVDs Cards: Notes and Cautions VCR DVD VCR Record Record- Open/Close - Skip Reverse/Forward Rewind/Fast Forward Reverse/ForwardStop StopPause PausePlay Play - Input select [1] TV [2] Component 1 [3] Component 2 [4] HDMI 1 [5] HDMI 2 [6] Video 1 [7] Video 2 [8] Video 3 Video 1 VCR Press corresponding NUMBER key on the Remote Control to select the input of your choice. Press to select the input of your choice, then press “OK”.•If during selection, no action is taken for several seconds, the Input selection menu is exited. SD Card: Notes and Cautions Message Meaning Card Warning MessagesCautions in handling card : Is memory card in? •The card is not inserted or this unit does not support the format. •Do not remove the card while the unit is accessing data (this can damage card or unit).•Do not touch the terminals on the back of the card.•Do not subject the card to a high pressure or impact.•Insert the card in the correct direction (otherwise, card may be damaged).•Electrical interference, static electricity, or erroneous operation may damage the data or card.•Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the unit. (Panasonic is not liable for any deterioration or damage of recorded data.)No file •The card has no data or this type of data is not supported. Watching Videos and DVDsSome Panasonic equipment connected to the TV unit can be operated with the remote control. Programming the remote control is necessary to operate other manufacturers’ products. (p. 33) 3 With VCR or DVD turned OnSwitch to external inputPress to display the Input select menu. 12 Select the input mode or select enter (example) Operatethe VCR or DVD with the remote control Note •For details, see the manual of the equipment or ask your local dealer. •The terminal and label of the connected device is indicated. To label each of the connected devices (p. 30) (For other operations, see p. 36.) vPress to return to TV (Initial screen) Label Terminal [example]
2021 Advanced How to Use Menu Functions (picture, sound quality, etc.) MenuItem Adjustments/Configurations (alternatives)Picture Normal Resets all picture adjustments to factory default settings except for “Other adjust” No Normal Pic. mode Basic picture mode (Vivid/Standard/Cinema) (p. 42) Standard Pic. mode Picture, Brightness, Color, Tint, Sharpness Adjusts color, brightness, etc. for each picture mode to suit your taste +30 0 0 Picture Brightness Color 0 +10 Tint Sharpness Color temp Selects level of warm colors (red) and cool colors (blue) (Warm/Cool/Normal) Cool Color temp Color mng. On enhances green and blue color reproduction, especially outdoor scenes. (On/Off) Off Color mng. Zoom adjust Adjusts vertical alignment and size when aspect setting is “ZOOM” (p. 40) Zoom adjust Other adjustVideo NR Reduces noise, commonly called snow. Leave off when receiving a strong signal. (On/Off) Video NR Off 3D Y/C filter Minimizes noise and cross-color in the picture. (On/Off) 3D Y/C filter Off Color matrix Selects image resolution of component-connected devices (SD/HD) SD: normal vision HD: high-definition vision Only 480p signal accepted; regular TV (NTSC) is not available. Color matrix SD MPEG NR Reduces noise of specific digital signals of DVD, STB, etc. (On/Off) MPEG NR Off Black level Select Dark or Light. Valid only for external input signals. (Dark/Light) Black level Dark Audio Normal Reset Bass, Treble and Balance adjustments to factory default settings. Set Normal Bass Increase or decrease the bass response. + 7 Bass Treble Increase or decrease the treble response. + 7 Treble Balance Emphasize the left / right speaker volume. 0 Balance Other adjustAI sound Equalize overall volume levels across all channels and VIDEO inputs. (On/Off) On AI sound Surround Enhances audio response when listening to stereo. (On/Off) Off Surround Speakers Switches to “Off” when using external speakers (On/Off) “AI sound”, “Surround” and “Audio leveler” do not work if “Off” is selected On Speakers HDMI1 in HDMI2 in Selects according to the signal when HDMI is connected (Auto/Digital/Analog) Auto: Automatically selects Analog / Digital signal Auto HDMI1 inAuto HDMI2 in Audio leveler Minimizes volume disparity after switching to external inputs 0 Audio leveler Timer Sleep, Timer1-5 The TV can automatically turn On/Off at the designated date and time. (p. 32) 60 Sleep Lock Locks the channels and programs (p. 26) Memory Card Displays SD card data (p. 16) Setup CH scan Selects the channel with “Program up/down” button (Fav./All) Fav.: Only channels registered as FAVORITE (p. 15, 28) CH scan All Language Selects the screen menu language (p. 13) Language Clock Adjusts the clock (p. 13) Clock Program channel Sets channels (p. 28) Program channel Input labels Select the terminal and the label of the external equipment (p. 30) Input labels CC Displays subtitles (Closed Caption) (p. 30) CC Other adjustAuto power on Turns TV On automatically when the cable box or a connected device is turned On (Set/Off) The Sleep Timer and On / Off timer will not function if “Auto power on” is set. Off Auto power on Side bar Increases the brightness of the side bar (Off/Dark/Mid/Bright)(4:3 mode only) The recommended setting is Bright to prevent panel “after image”. (p. 42) Bright Side bar Prog-out stop To prevent howling and image oscillation, stops output of the pictures and audio specified in this menu. (p. 35) (Off/Comp.1/Comp.2/HDMI 1/HDMI 2/Video 1/Video 2/Video 3) Off Prog-out stop Ctrl with HDMI Controls equipment connected to HDMI terminals (p. 22) (On/Off) “Power off link” and “Power on link” do not work if “Off” is selected. On Ctrl with HDMI Power off link Sets “Power off link” of HDMI connection equipment (p. 22) (Set/No) Set Power off link Power on link Sets “Power on link” of HDMI connection equipment (p. 22) (Set/No) Set Power on link About Displays TV version and software license About Reset Performing Reset will clear all items set with Setup, such as channel settings. (p. 28) Reset •In AV mode, the Audio menu and Setup menu give a smaller number of options. Menu Picture AudioLockSetupMemory cardTimer No Standard +30 0 0 0 +10 Picture 1/2 Normal Pic. mode Picture Brightness Color Tint SharpnessNo Standard +30 0 0 0 +10 Picture 1/2 Normal Pic. mode Picture Brightness Color Tint Sharpness vPress to return to TVvPress to return to the previous screenHow to Use Menu Functions Select the menu Select the item 32 Adjust or select 4 adjust or select 1 select next select Display menu (example: Picture menu) Various menus allow you to select settings for the picture, sound, and other functions so that you can enjoy watching TV in your own way. vMenu list (example: Picture menu) •Displays the functions that can be set (varies according to the input signal)